Die Kristallstruktur von Dikalium-trikobalt(II)-dihydroxid-trisulfat-dihydrat,K2Co3(OH)2(SO4)3·2H2O

Crystals of K₂Co₃(OH)₂(SO₄)₃·2H₂O were synthesized under hydrothermal conditions. The crystal structure [a=17.945 (4) Å,b=7.557 (2) Å,c=9.760 (3) Å, space group Cmc2₁,Z=4] was determined by direct methods and refined with single crystal X-ray data. The H atoms were located byFourier syntheses. Their structural parameters were refined, too. The finalR-values areR=0.025 andR _w =0.028 (w=1/) for 612 reflections withF ₀>3 (F ₀). Both Co(II) atoms are octahedral six coordinated and form zigzag chains running parallel [001]. These chains are connected via sulfate groups to built up sheets parallel (100). The KO₉ polyhedron and one of the four hydrogen bonds link these sheets.

     

Phyllohydroquinone (Vitamin K1 H2) and Phylloquinone (Vitamin K1): Purification and Spectral Analysis

Abstract

Simple procedures for the preparation of pure phyllohydroquinone and phylloquinone are described. Phylloquinone is reduced by sodium dithionite and the reduced vitamin is purified by reverse phase high performance liquid chromatography. The essential spectral properties of the pure vitamins in ethanol and methanol are cited. The data provide a convenient spectral method for the accurate determination of the absolute concentrations of the oxidized and reduced vitamins and the rates of oxidation of the reduced vitamin. Pure, dry phyllohydroquinone may be safely stored at -70[ddot]C under nitrogen for a period of months. The stability of Phyllohydroquinone in methanol at 25.0 ± 0.1[ddot]C is also reported.     

Anharmonicity and Spectra–Structure Correlations in MIR and NIR Spectra of Crystalline Menadione (Vitamin K3)

Mid-infrared (MIR) and near-infrared (NIR) spectra of crystalline menadione (vitamin K₃) were measured and analyzed with aid of quantum chemical calculations. The calculations were carried out using the harmonic approach for the periodic model of crystal lattice and the anharmonic DVPT2 calculations applied for the single molecule model. The theoretical spectra accurately reconstructed the experimental ones permitting for reliable assignment of the MIR and NIR bands. For the first time, a detailed analysis of the NIR spectrum of a molecular system based on a naphthoquinone moiety was performed to elucidate the relationship between the chemical structure of menadione and the origin of the overtones and combination bands. In addition, the importance of these bands during interpretation of the MIR spectrum was demonstrated. The overtones and combination bands contribute to 46.4% of the total intensity of menadione in the range of 3600–2600 cm⁻¹. Evidently, these bands play a key role in shaping of the C-H stretching region of MIR spectrum. We have shown also that the spectral regions without fundamentals may provide valuable structural information. For example, the theoretical calculations reliably reconstructed numerous overtones and combination bands in the 4000–3600 and 2800–1800 cm⁻¹ ranges. These results, provide a comprehensive origin of the fundamentals, overtones and combination bands in the NIR and MIR spectra of menadione, and the relationship of these spectral features with the molecular structure.     

Influence of ZrO2 on Carbon Monoxide Oxidation Over Pd/Al2O3

The influence of ZrO₂ on the properties of Al₂O₃ and performances of Pd/Al₂O₃ catalyst in CO oxidation have been investigated. TPD results show that the activity enhanced is due to the increase of the adsorptive capacity of CO and the activation of C=O bond after the introduction of ZrO₂.     

Synthesis of new complex salt crystal K3[InCl6]

During the experiment of preparing ITO (Indium Tin Oxide) nanopowder, a new complex salt crystal K₃[InCl₆] was found and synthesized using a solution growth method. The diffraction pattern, morphology, element composition and structure of the crystal were analyzed by XRD, SEM and CCD. The results implied that K₃[InCl₆] is monoclinic, is of the space group P2₁/c, has a chemical formula of K₃[InCl₆], a Z = 4 and with the following cell parameters: a = 12.188 Å, b = 7.553 Å, c = 12.703 Å, α = 90.00°, β = 108.96°, γ = 90.00°, V = 1105.98 ų.     

Studies of Some New Aminocyclodiphosphazane Complexes of Co(II), Ni(II), and Cu(II)

The ligand aminocyclodiphosph(V)azane derivative (III) and its complexes with Co(II), Ni(II), and Cu(II) ions were prepared and characterized by microanalytical, FTIR, ¹H, ¹³C, and ³¹P-NMR, UV/Visible, thermogravimetric (TGA) analysis, and magnetic moments. The ligand acts in a tetrahedral manner forming 2:1 metal to ligand ratio. The copper complex is assigned to be tetrahedral while cobalt and nickel complexes were assigned to be octahedral structure.     

Thermal Decomposition of Bi(III), Cd(II), Pb(II) and Cu(II) Thiocyanates

Thermal decomposition of Bi(SCN)₃, Cd(SCN)₂, Pb(SCN)₂ and Cu(SCN)₂ has been studied. The thermal analysis curves and the diffraction patterns of the solid intermediate and final products of the pyrolysis are presented. The gaseous products of the decomposition (SO₂ and CO₂) were detected and quantitatively determined. Thermal, X-ray and chemical analyses have been used to establish the nature of the reactions occurring at each stage in the decomposition.This revised version was published online in November 2005 with corrections to the Cover Date.     

5-Methyl-2-furylglyoxal, 5-Methyl-4-nitro-2-furylglyoxal, and Their Derivatives. Nitration of 2-(5-Methyl-2-furyl)quinoxaline

The oxidation of 2-acetyl-5-methyl-4-R-furans (R = H, NO₂) by selenious acid was studied. Derivatives substituted at the C=O groups of the corresponding glyoxals were obtained. The nitration of 2-(5-methyl-2-furyl)quinoxaline was carried out at C_(4'). Oxidative splitting of the -nitrofuryl group occurs at the C₍₄₎-C₍₅₎ and C₍₅₎-O bonds.     

Asymmetric Schiff Base (N 2 O 3 ) Complexes as Ligands Towards Mn(II), Fe(III) and Co(II), Synthesis and Characterization

Heterobi- and tri-nuclear complexes [LMM'Cl] and [(LM) 2 M'](M=Ni or Cu and M'=Mn, Fe or Co) have been synthesised. The heteronuclear complexes were prepared by stepwise reactions using two mononuclear Ni(II) and Cu(II) complexes of the general formula [HLM]·1/2H 2 O, as ligands towards the metal ions, Mn(II), Fe(III) and Co(II). The asymmetrical pentadentate (N 2 O 3 ) Schiff-base ligands used were prepared by condensing acetoacetylphenol and ethylenediamine, molar ratio 1 1, to yield a half-unit compound which was further condensed with either salicylaldehyde or naphthaldehyde to yield the ligands H 3 L 1 and H 3 L 2 which possess two dissimilar coordination sites, an inner four-coordinate N 2 O 2 donor set and an outer three-coordinated O 2 O set. 1 H NMR and IR spectra indicate that the Ni(II) and Cu(II) ions are bonded to the inner N 2 O 2 sites of the ligands leaving their outer O 2 O sites vacant for further coordination. Different types of products were obtained according to the type of metal ion. These products differ in stoichiometry according to the type of ligand in the parent compound. Electronic spectra and magnetic moments indicate that the structures of the parent Ni(II) and Cu(II) complexes are square-planar while the geometry around Fe(III), Mn(II) and Co(II) in their products are octahedral as elucidated from IR, UV-visible, ESR, 1 H NMR, mass spectrometry and magnetic moments.     

Kinetics of the thermal decomposition of [Co(NH3)6]2(C2O4)3·4H2O

The thermal decomposition of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O was studied under isothermal conditions in flowing air and argon. Dissociation of the above complex occurs in three stages. The kinetics of the particular stages thermal decomposition have been evaluated. The R_N and/or A_M models were selected as those best fitting the experimental TG curves. The activation energies,E, and lnA were calculated with a conventional procedure and by a new method suggested by Kogaet al. [10, 11]. Comparison of the results have showed that the Arrhenius parameters values estimated by the use of both methods are very close. The calculated activation energies were in air: 96 kJ mol^–1 (R_1.575, stage I); 101 kJ mol^–1 (Ain1.725 stage II); 185 kJ mol^–1 (A _2.9, stage III) and in argon: 66 kJ mol^–1 (A _1.25, stage I); 87 kJ mol^–1 (A _1.825, stage II); 133 kJ mol^–1 (A _2.525, stage III).     

Complexes of Co(II), Ni(II), Cu(II), and Pd(II) with Sulfametrole-Cyclodiphosph(V)azane Derivatives

Novel [1,3-di-[N ₁ -4-methoxy-1,2,5-thiadiazole-3-yl-sulfanilamide(sulfametrole)]-2″4-bis-[1,3-dithiole-2-thione-4,5-dithiolate]-2′,4′-dichl-orocyclodiphosph(V)azane] (III) , was prepared and their coordinating behavior towards the metal ions Co(II), Ni(II), Cu(II), and Pd(II) was studied. The structures of the isolated products are proposed based on elemental analyses, IR, UV, ¹ H, and ³¹ P NMR, ESR, magnetic susceptibility, molar ratio, conductometric titration and electrical conductivity measurements. The prepared complexes showed high to moderate bactericidal activity compared with the ligand.     

Partial molar volumes and partial molar adiabatic compressibilities of bipyridine and phenanthroline complexes with Fe(II), Co(II), Ni(II), and Cu(II) and chlorides of these metals

Densities and ultrasonic velocities were measured at 25°C for aqueous solutions of bipyridine and phenanthroline complexes [M(bpy)₃]Cl₂ and [M(phen)₃]Cl₂ (M=Fe, Co, Ni, and Cu, bpy=2,2-bipyridine, and phen=1,10-phenanthroline), and chlorides of these metals. The partial molar volumes V ₂ ^o and partial molar adiabatic compressibilities K _s ^o were calculated. For the complex ions, [M(bpy)₃]²⁺ and [M(phen)₃]²⁺, electrostatic interactions with the solvent are not nearly as important as effects due to the hydrophobic ligands bpy and phen. The relationship between V ₂ ^o and K _s ^o of the complex ions and common metal ions are examined.     

Raman spectroscopic study of K3H(SO4)2 (phases I and II) single crystals

A Raman study of K₃H(SO₄)₂ as a function of temperature reveals that this compound undergoes a phase transition at T_c = 483 K prior to the decomposition at 508 K.     

Synthesis,spectroscopic and thermal characterization of Co(II) tetrahydrogen hexaoxoiodate tetrahydrate

A new cobalt(II) tetrahydrogen hexaoxoiodate tetrahydrate Co(H₄IO₆)₂·4H₂O is prepared by crystallization from an acidic aqueous solution. This compound is identified by quantitative analysis, TG, DTA, DSC and IR spectra. A thermal decomposition scheme is proposed. Some phase transitions are identified and the corresponding enthalpy changes are determined.     

Pd/Cu catalyzed homo-coupling reactions of 2-iodo-3-iodomethyl-1,4-diarylnaphthalene in the presence of arylacetylene

Palladium/CuI catalyzed reactions of 2-iodo-3-iodomethyl-1,4-diarylnaphthalenes in the presence of arylacetylenes produced the corresponding sp³-sp³ homo-coupling products 1,2-bis(3-iodonaphthalen-2-yl)ethane in moderate to good yields.     

电池正极材料Li3V2(PO4)3/C的水热合成和性能

以LiOH·H2O, NH4VO3, NH4H2PO4 和麦芽糖等为原料, 采用水热法合成了碳包覆的磷酸钒锂化合物, 考察了碳含量对材料电化学性能的影响. 利用XRD, TEM, SEM和恒流充放电测试等手段对产物的结构、 形貌和电化学性能进行表征. 结果表明, 在650℃煅烧的样品为单一纯相的单斜晶体结构. 晶体颗粒分布为100~300 nm, 粒度分散均匀, 分散性良好, 无团聚现象, 且在颗粒表面包覆了一层无定形碳, 这有利于改善材料的导电率. 含碳量为10.23%的样品, 在倍率1.0C的电流密度下, 在3.0~4.3 V电压范围内, 样品的首次放电比容量高达118.8 mA·h/g, 循环15圈后放电比容量为115.1 mA·h/g, 容量保持率为96.88%.     

Synthesis, spectral and electrochemical characterization of novel 2-(fluoroanilino)-1,4-naphthoquinones

The preparation of novel 2-(fluoroanilino)-1,4-naphthoquinones is presented. It takes place under mild conditions by reacting the corresponding fluoroaniline and 1,4-naphthoquinone in the presence of a Lewis acid catalyst with strong oxidation properties such as CeCl₃·7H₂O. This preparation was also investigated under microwave irradiation. All 1,4-naphthoquinone derivatives were characterized by UV-Vis, IR, ¹H and ¹⁹F NMR, MS and cyclic voltammetry, to investigate the effect of the fluoro-substituents on their electronic properties.     

Die Kristallstrukturen der Kupfer(II)-oxo-selenite Cu2O(SeO3) (kubisch und monoklin) und Cu4O(SeO3)3 (monoklin und triklin)

Syntheses within the system CuO-SeO₂-H₂O revealed four copper(II)-oxo-selenites. The crystal structures of these compounds were determined by single crystal X-ray techniques. Chemical formulae, lattice parameters and space groups are: Cu₂O(SeO₃)-I [a=8.925 (1) Å, P2₁3], Cu₂O(SeO₃)-II [a=6.987 (5) Å,b=5.953 (4) Å,c=8.429 (6) Å, =92.17 (3)°, P2₁/n], Cu₄O(SeO₃)₃-I [a=15.990 (8) Å,b=13.518 (8) Å,c=17.745 (12) Å, =90.49 (5)°, P2₁/a], and Cu₄O(SeO₃)₃-II [a=7.992 (6) Å,b=8.141 (6) Å,c=8.391 (6) Å, =77.34 (3)°, =65.56 (3)°, =81.36 (3)°, ].All the Cu atoms are-with one exception-[4], [4+1], and [4+2] coordinated by O atoms. The four nearest O atoms are more or less distorted square planar arranged. Within the CuO₄ squares the Cu-O bond lengths are significantly shorter for the [4] coordinated O atoms as compared with those of the [4+1] and [4+2] coordinated Cu atoms. The exception in the coordination of the Cu atoms is the Cu(1) atom in Cu₂O(SeO₃)-I with the site symmetry 3, which is trigonal dipyramidal [5] coordinated. A common feature of these four crystal structures is, that O atoms outside the SeO₃ groups are tetrahedrally coordinated by four Cu(II) atoms. The Se atoms are as usual [3] coordinated, building up SeO₃ pyramids. In all these four compounds the copper-oxygen polyhedra are combined to a three-dimensional network.

     

Complexes of Cu(II), Ni(II), Co(II), and Ag(I) Metals with 1,4-Bis(3-Phenyl Triazenil) Benzene

Moscow University Chemistry Bulletin - New complexes of Cu(II), Ni(II), Co(II) and Ag(I) with 1,4-bis(3-phenyl triazenyl) benzene are obtained. Using the methods of IR, EPR, electron spectroscopy,...     

Crystal structure of Li2Cu3(SeO3)2(SeO4)2

Summary Single crystal X-ray data of the hydrothermally grown new phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ were measured with a four-circle diffractometer up to sin /=0.81 Å^–1 [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, = 94.21(1)°]. The structure was determined by direct and Fourier methods and refined toR=0.034,R _w =0.027 for 2 086 independent reflections.Cu(1)^[4+1]O₅ forms a tetragonal pyramid, Cu(2)^{[4 + 2]}O₆ is a strongly elongated octahedron. The Li atom is surrounded by four O atoms forming a distorted tetrahedron. Se(IV)O₃ and Se(VI)O₄ groups are in accordance to literature, mean Se-O bond lengths are 1.714 and 1.644 Å.

---

Die Kristallstruktur von Li₂Cu₃(SeO₃)₂(SeO₄)₂

Zusammenfassung Einkristall-Röntgendaten der hydrothermal gezüchteten neuen Phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ wurden mit einem Vierkreisdiffraktometer im Bereich bis zu sin /=0.81 Å^–1 gemessen [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, =94.21(1)°]. Die Kristallstruktur wurde mittels direkter und Fourier-Methoden bestimmt und für 2 086 unabhängige Reflexe zuR=0.034,R _w =0.027 verfeinert.Cu(1)^[4+1]O₅ bildet eine tetragonale Pyramide, Cu(2)^[4+2]O₆ ist ein stark verlängertes Oktaeder. Das Li-Atom ist von vier O-Atomen in Gestalt eines verzerrten Tetraeders umgeben. Die Se(IV)O₃-und Se(VI)O₄-Gruppen entsprechen der Literatur, die mittleren Se-O-Abstände betragen 1.714 und 1.644 Å.