DSC study of the phase transitions in [Ni(D2O)6](ClO4)2 and [Ni(H2O)6](ClO4)2

DSC measurements were carried out for [Ni(H₂O)₆](ClO₄)₂ (sampleH) and [Ni(D₂O)₆](ClO₄)₂ (sampleD) in the temperature range 300–380 K. For both compounds two anomalies on the DSC curves were detected. The results for sampleH are compared to those previously obtained using adiabatic calorimetry method. For both compounds studied in this work the high-temperature transition appears at the same temperature while the low-temperature one is shifted towards higher temperatures in sampleD. Disorder connected with H₂O or D₂O groups is suggested in the intermediate phase between the low- and high-temperature transitions.     

Fe(HSO4)3 Promoted Trimethylsilylation of Alcohols and Phenols in Solution and Under Solvent-Free Conditions

Summary. Alcohols and phenols are efficiently converted to their corresponding trimethylsilyl ethers with hexamethyldisilazane (HMDS) in the presence of Fe(HSO₄)₃ in solution and under solvent-free conditions.     

SPIN-CROSSOVER OF [Fe(Cl-BZIMPY)2](ClO4)2 INDUCED BY DEPROTONATION

Abstract

The ligand 4-Cl-2,6-bis(benzimidazol-2′-yl)-pyridine(Cl-bzimpy;H₂L) acts as a bidentate when coordinated with transition metal ions and the complex [Fe(Cl-bzimpy)₂](ClO₄)₂ was isolated as a solid. The protonation constants (logK). The free ligand and the complex were evaluated in 30:70 (v/v) H₂O:EtOH at room temperature and ionic strength of 0.13M (KCl). Coordination of the ligand to the metal ion leads to an increase of the acidity of the imino-hydrogen of the benzimidazole group. Deprotonation leads to a change in the spin-state (to the low-spin state; HS → LS transition) of the complex associated with a decrease in the spin-crossover equilibrium constant (K_sc). An opposite shift of spin-state is observed when HClO₄ is added to the complex solution, thus showing the reversibility of the process.     

Efficient Acetylation of Alcohols,Phenols, and Amines Catalyzed by Melamine Trisulfonic Acid (MTSA)

Melamine trisulfonic acid (MTSA) was easily prepared by the reaction of melamine with neat chlorosulfonic acid at room temperature. This reagent can be used as an efficient catalyst for the acetylation of alcohols, phenols, and amines with Ac₂O under mild and completely heterogeneous reaction conditions.     

Efficient Acetylation of Alcohols and Phenols Catalyzed by Recyclable Lithium Bis(perfluoroalkylsulfonyl)imide

An efficient acetylation of alcohols and phenols catalyzed by lithium bis(perfluoroalkylsulfonyl)-imide was developed. This acetylation features good yields, mild reaction condtions, and simple workup procedures. Furthermore, the catalyst bearing a long perfluoroalkyl chain is recoverable and readily reusable without losing any activity.     

Synthesis,characterization and thermal analysis of [Fe(N2H4)2(CH3COO)2]

[Fe(N₂H₄)₂(CH₃COO)₂] was synthesised and characterized for the first time by chemical analysis, magnetic measurements, electronic and IR spectral studies. Its thermal reactivity was ascertained by thermogravimetric (TG) and derivative thermogravimetric (DTG) techniques and it has been concluded that unlike some other metal carboxylate hydrazinates, it does not show any autocatalytic behaviour. The decomposition was also subjected to kinetic analysis using the equations of Coats-Redfern and Horowitz-Metzger by the method of weighted least-squares.     

Kinetics of the thermal decomposition of [Co(NH3)6]2(C2O4)3·4H2O

The thermal decomposition of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O was studied under isothermal conditions in flowing air and argon. Dissociation of the above complex occurs in three stages. The kinetics of the particular stages thermal decomposition have been evaluated. The R_N and/or A_M models were selected as those best fitting the experimental TG curves. The activation energies,E, and lnA were calculated with a conventional procedure and by a new method suggested by Kogaet al. [10, 11]. Comparison of the results have showed that the Arrhenius parameters values estimated by the use of both methods are very close. The calculated activation energies were in air: 96 kJ mol^–1 (R_1.575, stage I); 101 kJ mol^–1 (Ain1.725 stage II); 185 kJ mol^–1 (A _2.9, stage III) and in argon: 66 kJ mol^–1 (A _1.25, stage I); 87 kJ mol^–1 (A _1.825, stage II); 133 kJ mol^–1 (A _2.525, stage III).     

Environmentally Friendly Preparation of 3,4-Dihydropyrimidin-2(1H)-thiones Catalyzed by Al(H2PO4)3

An efficient, facile, simple, and green synthetic protocol for the Biginelli reaction has been developed for the preparation of 3,4-dihydropyrimidin-2(1H)-thione derivatives under thermal and microwave irradiation, solvent-free conditions, in the presence of aluminum hydrogen phosphate, Al(H₂PO₄)₃, as an environmentally friendly heterogeneous recyclable catalyst, in high to excellent yields and short reaction time. In addition, the catalyst could be easily recovered from the reaction mixture by simple filtration and reused several times without any loss of activity.     

The effect of experimental methods and measurement conditions on values of the kinetic parameters of [Co(NH3)6]2(C2O4)3·4H2O

Using the thermal decomposition of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O as a basis, the paper presents results which show how computed values of kinetic parameters are influenced by experimental conditions (ambient atmosphere, sample mass, linear heating rate) when using the non-isothermal methods and the Coats-Redfern (CR) modified equation. It also illustrates the influence of the experimental methods i.e. non-isothermal and isothermal (conventional) methods and also a quasiisothermal-isobaric one which can be recognised as equivalent to Constant Rate Thermal Analysis (CRTA). The results obtained have confirmed the significant influence of the experimental parameters as well as that of the experimental method used on the estimated values of kinetic parameters. The correlation between activation energy (E) and sample mass (m) or heating rate (β) is generally of a linear nature:E=a+bx     

Investigation on The Thermal Properties of Fe2O(SO4)2. Part II

Fe₂O(SO₄)₂ is a secondary product of the decomposition of FeSO₄⋅H₂O. Part I of this study presents results on the synthesis of Fe₂O(SO₄)₂ in gaseous environment containing either low or high concentration of oxygen. In this paper the existence of differences between the structures of Fe₂O(SO₄)₂ and Fe₂(SO₄)₃ is proved on the basis of a detailed thermal study of Fe₂O(SO₄)₂ upon dynamic heating (differential thermal analysis) and upon isothermal heating (thermal-analytic balance) in various gaseous environments as well as by presenting kinetic data on the processes of decomposition of both compounds. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and thermal investigation of Na2Cd(SO4)2·2H2O

The synthesis and thermal decomposition of Na₂(SO₄)₂·2H₂O in both air and nitrogen are described. The synthesis was performed by two different procedures, but in both cases the same product was obtained, corresponding to the general formula given above. The crystals obtained were investigated by methods of X-ray powder diffraction, and chemical and thermal analysis. The differences in thermal decomposition in air and nitrogen are discussed.     

An Efficient Synthesis of New 3,4-Dihydropyrimidin- 2(1H)-ones Incorporating a Phenyl Moiety at C-5 and C-6 Catalyzed by TMSCl and Co(OAc)2.4H2O

New 3,4-dihydropyrimidin-2-ones having a phenyl moiety at C-5 and C-6 have been prepared by a microwave-assisted Biginelli–like reaction by a three-component, one-pot condensation of an aromatic aldehyde, deoxybenzoin and urea, or thiourea using TMSCl and Co(OAc) ₂ .4H ₂ O as an efficient Lewis acid catalyst.     

Etude de la deshydratation de Ca(H2PO4)2·H2O et de sa reaction avec CaSO4 par ATD-ATG couplees

The dehydration of Ca(H₂PO₄)₂·H₂O was examined with simultaneous DTA and TG. This dehydration permitted clearly the apparation of the following phases: Ca(H₂PO₄)₂·0.5H₂O, Ca(H₂PO₄)₂, Ca₃(HP₂O₇)₂, Ca₂HP₃O₁₀ et Ca(PO₃)₂. The reaction of Ca(H₂PO₄)₂·H₂O and CaSO₄ was also examined with the same technics. It was found that the decomposition of CaSO₄ takes place for relatively low temperature (between 600°C and 800°C).     

V(HSO_4)_3 promoted oxidation of alcohols and trimethylsilyl,tetrahyropyranyl and methoxymethyl ethers with Cu(NO_3)_2·3H_2O in the absence of solvent

V(HSO_4)_3 has been found to be an efficient reagent for the promotion of the oxidation of alcohols and trimethylsilyl, tetrahydropyranyl and methoxymethyl ethers to their corresponding carbonyl compounds with Cu(NO_3)_2·3H_2O in the absence of solvent.     

Die Kristallstruktur von Dikalium-trikobalt(II)-dihydroxid-trisulfat-dihydrat,K2Co3(OH)2(SO4)3·2H2O

Crystals of K₂Co₃(OH)₂(SO₄)₃·2H₂O were synthesized under hydrothermal conditions. The crystal structure [a=17.945 (4) Å,b=7.557 (2) Å,c=9.760 (3) Å, space group Cmc2₁,Z=4] was determined by direct methods and refined with single crystal X-ray data. The H atoms were located byFourier syntheses. Their structural parameters were refined, too. The finalR-values areR=0.025 andR _w =0.028 (w=1/) for 612 reflections withF ₀>3 (F ₀). Both Co(II) atoms are octahedral six coordinated and form zigzag chains running parallel [001]. These chains are connected via sulfate groups to built up sheets parallel (100). The KO₉ polyhedron and one of the four hydrogen bonds link these sheets.

     

Interaction Between Two Similar Plane Parallel Double Layers for (NH4)2Fe(SO4)2 or (NH4)2Cu(SO4)2 Type Complex Salt Electrolytes at Positive Surface Potential

Interaction energies between two similar plane parallel double layers for (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ type complex salt electrolytes at positive surface potential were expanded in a power series and accurate numeral results were given for 0.1 ≤ y _e  < y ₀ ≤ 20. The general expressions were given for the interaction energies of A _ν +B _ν′ +C_ν? type complex salt electrolytes at y > 0. The interaction energies for simple salts NaCl, CaCl₂, Na₂SO₄, FeCl₃, Na₃PO₄, Mg₃(PO₄)₂, Al₂(SO₄)₃, and complex salts (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ at y ₀ = 1 were compared. There was hardly difference between these simple salts and this complex salt for the interaction energies. The interaction energy for complex salt (NH₄)₂Fe(SO₄)₂ was close to that for simple salt Na₃PO₄.

Supplemental files are available for this article. Go to the publisher's online edition of the Journal of Dispersion Science and Technology to view the free supplemental file.     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

A green synthesis of 3,4-dihydropyrimidin-2-ones and 1,5-benzodiazepines catalyzed by Sn(HPO4)2.H2O nanodisks under solvent-free condition at room temperature

Abstract

Heterogeneous Tin (IV) hydrogen phosphate nanodisks [Sn(HPO4)2.H2O] efficiently catalyzed the one-pot three component condensation of aromatic aldehydes, β-ketoesters and urea to produce 3,4–dihydropyrimidin-2-ones under solvent-free conditions at room temperature. Also, the catalyst is equally applicable for the preparation of 1,5–benzodiazepines under the same reaction conditions. The optimum load of the catalyst required is 10 mole% and reusable. Hence, the process is green.

Low-temperature heat capacities and thermodynamic properties of rare-earth triisothiocyanate hydrates (III) —Sm(NCS)3 · 6H2O, Gd(NCS)3 · 6H20, Yb(NCS)3 · 6H20 and Y(NCS)3 · 6H20

The heat capacities of four RE isothiocyanate hydrates, Sm(NCS)₃, · 6H₂0, Gd(NCS)₃ · 6H₂0, Yb(NCS)₃, · 6H₂O and Y(NCS)₃, · 6H₂0, have been measured from 13 to 300 K with a fully-automated adiabatic calorimeter. No obvious thermal anomaly was observed for the above-mentioned compounds in the experimental temperature ranges. The polynomial equations for calculating the heat capacities of the four compounds in the range of 13–300 K were obtained by the least-squares fitting based on the experimentalC _P, data. TheC _P, values below 13 K were estimated by using the Debye-Einstein heat capacity functions. The standard molar thermodynamic functions were calculated from 0 to 300 K. Gibbs energies of formation were also calculated. Project supported by the National Natural Science Foundation of China.     

Simultaneous thermoanalytical investigations of (C6H5)4AsCl and (C6H5)4PCl under air and argon atmospheres

The thermoanalytical curves of (C₆H₅)₄AsCl (I) and (C₆H₅)₄PCl (II) were generated simultaneously by using a Netzsch simultaneous thermal analyser 409 under static air and dynamic argon atmospheres. The ranges of thermal stability of I and II were found to be 145–310°C and 137–365°C, respectively, and their melting points to be 261 and 278°C. The DTA profiles of I and II differ and can be used for their distinction.