Vibrational spectra and ab initio analysis of tert-butyl,trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene. I. 3,3-Dimethyl-1,2-bis(tert-butyl)cyclopropene

The geometrical parameters of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene were optimised completely at the HF/6-31G* level. The HF/6-31G*//HF/6-31G* force field was calculated and scaled using Pulay's scaling procedure. The set of 17 scale factors (for a 105-dimensional problem) was compiled from the sets obtained previously for 3,3-dimethyl-1-butene and 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene. The vibrational problem was solved using the scaled quantum mechanical force field (QMFF) and assignments of the vibrational frequencies of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene were considered in comparison with the known assignments of 3,3-dimethyl-1-butene and 3,3-dimethylcyclopropene. Assignments of four experimental IR bands of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene given in the literature are suggested.     

Vibrational spectra and ab initio analysis of tert-butyl,trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene IV. 3,3-dimethyl-1,2-bis(trimethylgermyl)cyclopropene

The infrared (IR) and Raman spectra of 3,3-dimethyl-1,2-bis(trimethylgermyl)cyclopropene (I) were measured in the liquid phase. Total geometry optimisation was performed at the HF/6-31G* level. The HF/6-31G*//HF6-31G* quantum mechanical force field (QMFF) was calculated and used to determine the theoretical fundamental vibrational frequencies, their predicted IR intensities, Raman activities, and Raman depolarisation ratios. Using Pulay's scaling method and the theoretical molecular geometry, the QMFF of I was scaled by a set of scaling factors comprised of elements transferred from the sets used to correct the QMFF's of 3,3-dimethylbutene-1, and 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene (17 scale factors for a 105-dimensional problem). This set of scale factors was used previously to correct the QMFF of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene and 3,3-dimethyl-1,2-bis(trimethylsilyl)cyclopropene. The scaled QMFF obtained was used to solve the vibrational problem. Differential Raman cross-sections were calculated using the quantum mechanical values of the Raman activities. The appropriate theoretical spectrograms for the Raman and IR spectra of I were constructed. Assignments of the experimental vibrational spectra of I are given. They take into account the calculated potential energy distributions and the correlation between the estimations of the experimental IR and Raman intensities and Raman depolarisation ratios and the corresponding theoretical values calculated using the unscaled QMFF.     

3,3-Bis(2-nitroxyethyl) derivatives of 1,1′-[methylenebis(oxy)]bis(triaz-1-ene 2-oxides) as a new type of NO donors

3,3-Bis(2-nitroxyethyl) derivatives of 1,1′-[methylenebis(oxy)]bis(triaz-1-ene 2-oxides) were synthesized by either nucleophilic substitution of the bromine atoms of parent 3,3-bis(2- bromoethyl) compounds or nitration of structurally related 3,3-bis(2-hydroxyethyl) derivatives. The synthesized compounds comprise two different NO donating moieties, namely, oxytriaz- 1-ene 2-oxide and nitrate groups, and, therefore, can be regarded as a new type of NO-donating agents.     

Synthesis of 3,3-bis(2-haloethyl) and 3,3,3′-tris(2-haloethyl) derivatives of 1,1′-[methylenebis(oxy)]bis(triaz-1-ene 2-oxides)

Synthetic procedures towards 3,3-bis(2-haloethyl) and 3,3,3′-tris(2-haloethyl) derivatives of 1,1′-[methylenebis(oxy)]bis(triaz-1-ene 2-oxides) via halogenation of the corresponding 2-hydroxyethyl derivatives of 1,1′-[methylenebis(oxy)]bis(triaz-1-ene 2-oxides) and iodination of the corresponding 2-bromoethyl derivatives were elaborated. The synthesized compounds are promising NO donors in the living organisms.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-β-haloethyl derivatives of bis(oxytriazene oxides) bearing the NCH<Subscript>2</Subscript>O fragment

Synthetic procedures towards 3-monosubstituted functional derivatives of 1-alkoxy-1-triazene 2-oxides were elaborated. Alkylation of the synthesized compounds with chloromethoxy derivatives of 3,3-bis(2-haloethyl)-1-hydroxy-1-triazene 2-oxides gave (2-chloro/ bromoethyl) derivatives of 1,2,3,6,7,8-hexaaza-5-oxa-3-alkoxyocta-1,6-diene 2,7-dioxides. 2-Iodoethyl-1,2,3,6,7,8-hexaaza-5-oxa-3-alkoxyocta-1,6-diene 2,7-dioxides were first synthesized by the reaction of the corresponding bromoethyl derivatives with NaI.     

Bis(trifluoromethyl)-containing 1-azatricycloheptanes

Methods for the synthesis ofanti-3-halo-7, 7-bis(trifluoromethyl)-1-azatricyclo[2.2.1.0^2,6]heptanes by conjugated halogenation of 3,3-bis(trifluoromethyl)-2-azabicyclo[2.2.1]hept-5-ene have been developed. Hydrohalogenation of the synthesized 1-azatricyclic compounds gives exclusively 6,7-dihalo-3,3-bis(trifluoromethyl)-2-azabicyclo[2.2.1]heptanes. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1649–1653, September, 1997.     

Novel 3,3′-(alkanediyl)bis-(2,2,2-triaryl-1-oxa-2-stiba-3-azabenzo[d]cyclohex-5-enes)

The hitherto unreported compounds of general structure 3,3′-(alkanediyl)bis-(2,2,2-triaryl-1-oxa-2-stiba-3-azabenzo[d]cyclohex-5-ene) have been synthesized in 48-56% yields by the cyclization of the tetrasodium salt of N,N′-bis(2-hydroxybenzyl)-1,2-diaminoethane(II) or of N,N′-bis(2-hydroxybenzyl)-1,3-diaminopropane(II*) with R₃SbBr₂ (R = phenyl, p-tolyl, or mesityl). The tetrasodium salts were prepared by the reactions of the corresponding amines with sodium hydride. The amines (II and II*), in turn, were obtained by the sodium borohydride reduction of N,N′-bis(salicylidene)-1,2-diaminoethane and N,N′-bis-(salicylidene)-1,3,-diaminopropane, respectively. The heterocyclic compounds are air stable and moisture insensitive. These compounds have been characterized by elemental analyses, molecular weight determinations, and by IR, far IR, ¹H, and ¹³C NMR spectral studies. © 1996 John Wiley & Sons, Inc.     

Lipase-catalysed resolution of 3,3′-bi-indolizines: The first preparative access to enantiomerically pure samples

The lipase-catalysed kinetic resolution of the axially chiral 3,3′-bis[1-(2-hydroxyethyl)-2-phenylindolizine] [(±)-1a] and the corresponding 3-hydroxypropyl derivative (±)-1b by acylation with vinyl acetate in the presence of lipases from different origins has been investigated. For the first time, enantiomerically pure 3,3′-biindolizine derivatives were obtained on a preparative scale by careful monitoring of the conversion.     

Vibrational spectra and ab initio analysis of tert-butyl,trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene II. 3,3-Dimethyl-1,2-bis(trimethylsilyl)cyclopropene

The IR and Raman spectra of 3,3-dimethyl-1,2-bis(trimethylsilyl)cyclopropene (I) (synthesised using standard procedures) were measured in the liquid phase. Total geometry optimisation was performed at the HF/6-31G* level. The HF/6-31G*//HF/6-31G* quantum mechanical force field (QMFF) was calculated and used to determine the theoretical fundamental vibrational frequencies, their predicted IR intensities, Raman activities, and Raman depolarisation ratios. Using Pulay's scaling method and the theoretical molecular geometry, the QMFF of I was scaled by a set of scaling factors used previously for 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene (17 scale factors for a 105-dimensional problem). The scaled QMFF obtained was used to solve the vibrational problem. The quantum mechanical values of the Raman activities were converted to differential Raman cross sections. The figures for the experimental and theoretical Raman and IR spectra are presented. Assignments of the experimental vibrational spectra of I are given. They take into account the calculated potential energy distribution and the correlation between the estimations of the experimental IR and Raman intensities and Raman depolarisation ratios and the corresponding theoretical values (including Raman cross sections) calculated using the unscaled QMFF.     

Bis(trifluoromethyl)-containing 1-azatricycloheptanes

6-Substituted 7-halo-3,3-bis(trifluoromethyl)-2-azabicyclo[2.2.1]heptanes were synthesized by the addition of water, alcohols, and acetic acid to 3-halo-7,7-bis(trifluoromethyl)-1-azatricyclo[2.2.1.0^2,6]heptanes in the presence of H₂SO₄. 5,6-Disubstituted 3,3-bis(trifluoromethyl)-2-azabicyclo[2.2.1]heptanes were prepared by oxymercuration of 3,3-bis(trifluoromethyl)-2-azabicyclo[2.2.1]hept-5-ene.     

二代螺环树形化合物1,2,3,4,5,6,7,8,9,10,11,12-十二氢-2,2;6,6;10,10-三[3,3-二(烷氧羰基)-1,1-环亚丁基二甲氧基]三亚苯基的合成

以1,4-环己二酮、丙二酸二乙酯及多元醇等为原料, 经过两次“一锅煮”法合成了六种二代螺环树形化合物1,2,3,4,5,6,7,8,9,10,11,12-十二氢-2,2;6,6;10,10-三[3,3-二(烷氧羰基)-1,1-环亚丁基二甲氧基]三亚苯基螺环树形化合物, 其中烷氧基为异戊氧基、三羟甲基甲氧基、2,2-二溴甲基-3-羟丙氧基、2,2-二羟甲基丙氧基、二羟甲基膦甲氧基和(N-羟甲基-N-二羟甲基氨基乙基)甲氧基. 利用IR, NMR, MS和元素分析对合成的化合物进行了结构认证, 对影响反应的因素进行了讨论.     

1-(取代吡唑-4-甲酰基)吡唑类化合物的合成及生物活性研究

设计合成了25个新型1-取代吡唑甲酰基吡唑系列衍生物,化合物结构经¹HNMR、元素分析、IR和MS确证.生物活性测试结果表明,该类化合物具有一定除草活性,讨论了其结构与活性的关系.     

Decoupling optical and potentiometric band gaps in pi-conjugated materials

Syntheses, optical spectroscopy, potentiometric studies, and electronic structural calculations are reported for two classes of conjugated (porphinato)metal oligomers that feature a meso-to-meso ethyne-bridged linkage topology. One set of these systems, bis[(5,5'-10,20-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethyne (DD), 5,15-bis[[5'-10',20'-bis[3,5-di(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DDD), and 5,15-bis[[15' '-(5'-10',20'-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5' '-10' ',20' '-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II)]ethyne]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DDDDD), constitute highly soluble analogues of previously studied examples of this structural motif having simple 10,20-diaryl substituents, while a corresponding set of conjugated oligomers, [(5-10,20-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5'-15'-ethynyl-10',20'-bis[10,20-bis(heptafluoropropyl)porphinato)zinc(II)]ethyne (DA), 5,15-bis[[5'-10',20'-bis[3,5-di(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethynyl]-10,20-bis(heptafluoropropyl)porphinato]zinc(II) (DAD), and 5,15-bis[[15' '-(5'-10',20'-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5' '-(10' ',20' '-bis(heptafluoropropyl)porphinato)zinc(II)]ethyne]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DADAD), features alternating electron-rich and electron-poor (porphinato)zinc(II) units. Electrooptic and computational data for these species demonstrate that it is possible to engineer conjugated oligomeric structures that possess highly delocalized singlet (S1) excited states yet manifest apparent one-electron oxidation and reduction potentials (E1/20/+ and E1/2-/0 values) that are essentially invariant with respect to those elucidated for their constituent monomeric precursors.     

Convenient Synthesis of Ketene N,S-Acetal from Low Nucleophilic Arylamine

Novel ketene N, S-acetals compounds were prepared by the reaction of ethyl 2-cyano-3,3-bis(methylthio)acrylate and 2-cyano-3,3-bis(methylthio)acrylonitrile with low nucleophilic aromatic amines in two convenient methods, respectively.     

New cyclobutyl analogs of adenosine and guanosine. Part 1. Synthesis of the 9-[3,3-bis(hydroxymethyl)cyclobutyl]purine nucleoside analogs

The synthesis of 1-amino-3,3-bis(benzyloxymethyl)cyclobutane has been performed from 3,3-bis(benzyloxymethyl)cyclobutanone, via the corresponding oxime which was reduced with lithium aluminum hydride. The amine thus obtained led to two new cyclobutyl analogs of adenosine and guanosine which were devoid of antiviral activity against HSV-1, HCMV and HIV in cell culture.     

Ultrafast singlet excited-state polarization in electronically asymmetric ethyne-bridged bis[(porphinato)zinc(II)] complexes

The excited-state dynamics of two conjugated bis[(porphinato)zinc(II)] (bis[PZn]) species, bis[(5,5'-10,20-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethyne (DD) and [(5,-10,20-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5',-15'-ethynyl-10',20'-bis(heptafluoropropyl)porphinato)zinc(II)]ethyne (DA), were studied by pump-probe transient absorption spectroscopy and hole burning techniques. Both of these meso-to-meso ethyne-bridged bis[PZn] compounds display intense near-infrared (NIR) transient S(1)-->S(n) absorptions and fast relaxation of their initially prepared, electronically excited Q states. Solvational and conformational relaxation play key roles in both DD and DA ground- and excited-state dynamics; in addition to these processes that drive spectral diffusion, electronically excited DA manifests a 3-fold diminution of S(1)-->S(0) oscillator strength on a 2-20 ps time scale. Both DD and DA display ground-state and time-dependent excited-state conformational heterogeneity; hole burning experiments show that this conformational heterogeneity is reflected largely by the extent of porphyrin-porphyrin conjugation, which varies as a function of the pigment-pigment dihedral angle distribution. While spectral diffusion can be seen for both compounds, rotational dynamics driving configurational averaging (tau approximately 30 ps), along with a small solvational contribution, account for essentially all of the spectral changes observed for electronically excited DD. For DA, supplementary relaxation processes play key roles in the excited-state dynamics. Two fast solvational components (0.27 and 1.7 ps) increase the DA excited-state dipole moment and reduce concomitantly the corresponding S(1)-->S(0) transition oscillator strength; these data show that these effects derive from a time-dependent change of the degree of DA S(1)-state polarization, which is stimulated by solvation and enhanced excited-state inner-sphere structural relaxation.     

Synthesis of pyrimidine derivatives by the reaction of ketene dithioacetals with amides

Reactions of methyl 2-cyano-3,3-bis(methylthio)acrylate ( 1a ) with carboxamides 2a-g in the presence of sodium hydride in a mixture of benzene and N,N-dimethylacetamide took place displacement with the methylthio group to give the corresponding methyl 3-N-acylamino-2-cyano-3-(methylthio)acrylates 3a-g which were readily converted to the corresponding pyrimidine derivatives at reflux in methanol in good yields. Reactions of 2-cyano-3,3-bis(methylthio)acrylonitrile ( 1b ) with the carboxamides 2a-f gave directly pyrimidine-5-carbonitrile derivatives 7a-f . Ketene dithioacetals 1a,b smoothly reacted with thioamide 2g or urea 2h,i to give the expected pyrimidine derivatives 9,10a,b . Polyfunctionalized pyrimidines, thus obtained, were also used for the synthesis of fused pyrimidine derivatives.     

The synthesis and thermal curing parameters of a novel quinoxaline monomer with terminal ethynyl thermoset and phenylethynyl intramolecular cycloaddition postcure capability

The Synthesis of 3,3′-bis(4-[3-ethynylphenoxy]phenyl)-7,7′-bis(phenylethynyl)-2,2′-diphenyl-6,6′-biquinoxaline (I) was accomplished by the reaction of 2,2′-bis(phenylethynyl)-5,5′-diaminobenzidine (II) and 4-(3-ethynylphenoxy)benzil. Thermal analysis of I indicated a softening temperature of 107°C, followed by an exotherm above 150°C that corresponded to a independent crosslinking reaction of the terminal acetylene groups and an intramolecular cycloaddition (IMC) reaction of the 2,2′-bis(phenylethynyl)biphenyl moieties. In the synthetic work substantial improvements were made in the synthesis of II. The sample of I was cured at 200°C and the maximum partially cured transition temperature attained was 280°C. A sample of 3,3′-bis(4,[3-ethynylphenoxy]phenyl)-2,2′-diphenyl-6,6′-biquinoxaline (IV) was similarly tested as a model without IMC capability and its corresponding value was 250°C. The difference between these two values is discussed briefly.     

Regioselective synthesis of functionalized ferrocenylphenols based on cyclocondensation reactions of free and masked 1,3-dicarbonyl dianions

Highly functionalized ferrocenyl-substituted phenols were prepared by cyclization of masked or free dianions with 1,3-dielectrophilic 1-η5-ferrocenyl-3,3-bis(methylthio)prop-2-en-1-ones. While the cyclizations of 1,3-bis(silyloxy)-1,3-butadienes (masked dianions) proceed by initial 1,2-addition, the reactions of free 1,3-dicarbonyl dianions proceed by initial 1,4-addition. Therefore, both regioisomeric ferrocenylphenols are available from one and the same electrophile dependent on the type of nucleophile and reaction conditions employed. The reactions reported represent the first examples of the application of formal [3 + 3] cyclizations to the synthesis of organometallic compounds.     

Synthese von 3,3-Bis(alkylthio)-2-(2-thioxo-benzo-2H-1,3-thiazol-3-yl)-acrylsäure-Derivaten und Kristallstruktur des entsprechenden Ethyl 3,3-Bis(methylthio)acrylats

Summary The 3,3-bis(alkylthio)-2-(2-thioxo-benzo-2H-1,3-thiazole-3-yl)acrylonitriles3a–e, the methyl and ethyl acrylates4 and5a–d, respectively, are prepared by dithiocarboxylation of the corresponding derivatives of acetic acid1a–c. The crystal structure of ethyl 3,3-bis(methylthio)-2-(2-thioxo-benzo-2H-1,3-thiazole-3-yl)acrylate5a has been determined by X-ray analysis.