Extension of the voltammetric theory to inert,permeable thin-film coated rotating disc electrodes: Part II. Behaviour of ferrocene-ferricinium ion and quinone-hydroquinone systems on polymer-coated electrodes

The voltammetric behaviour of ferrocene-ferricinium ion and quinone-hydroquinone systems is investigated on electrochemically thin film polymer coated electrodes. Ferrocene oxidation is studied in 0.1 M NBu₄ ClO₄-nitromethane on rotating disc platinum electrodes coated with poly(2-hydroxymethyl-1,4-phenylene) oxide (I), poly-(2,6-dimethyl-1,4-phenylene) oxide (II), and poly[4-(2-aminoethyl)-1,2-phenylene] oxide (III) films. The quinone-hydroquinone system is investigated in aqueous medium (1 M HClO₄) with (I), (II) and poly-(2-cyano-1,4-phenylene) oxide films. Experimental results are in good agreement with the previously calculated voltammetric curves in steady-state mass transfer conditions. The charge transfer and diffusion parameters on these polymer-coated electrodes are calculated The quinone-hydroquinone system is rendered reversible by coating a platinum electrode with I.     

Unperturbed dimensions of poly(2-methyl-6-phenyl-1,4-phenylene oxide) and poly(2,6-diphenyl-1,4-phenylene oxide) chains

The unperturbed chain dimensions of unfractionated poly(2-methyl-6-phenyl-1,4-phenylene oxide) and poly-(2,6-diphenyl-1,4-phenylene oxide) have been measured by combining molecular weight data from light scattering with intrinsic viscosity data in chloroform. The unperturbed chain dimensions of the former polymer were also measured directly by light scattering dissymmetry in a critical consolute solvent mixture (methyl cyclohexane: 1,4-dioxane 50:50 by volume). The results of these measurements and of measurements reported by other investigators are satisfactorily explained by postulating no dimension-expanding prejudice in azimuthal angle in chain conformers of the 2,6-substituted-1,4-phenylene oxide polymers. This corresponds to equal population of the two chain rotation energy minima at azimuthal angles 90° and 270°. Accepting this postulate, one calculates from the observed chain dimensions that the C? O? C bond angle is 118–120° in these aromatic polyethers in solution.     

Charge transfer efficiency in hybrid bulk heterojunction composites

On the basis of recently published electrochemical measurements, the charge transfer efficiency within CdSe nanocrystal/conducting polymer heterojunction composites was investigated by means of luminescence interaction strength. It was found that poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] and poly-9-vinylcarbazole luminescence was not totally quenched by nanocrystals, whereas poly-3-octylthiophene and polyvinylpyrrolidone was completely quenched. In case of poly-3-hexylthiophene, the nanocrystal luminescence was quenched. The results are in complete agreement with the electrochemical findings and thus, the CdSe nanocrystal/Polyvinylpyrrolidone composite should be a promising material for electroluminescent devices.     

Aromatization of unsaturated poly-cyclohexane sulphone

Copolymers of cyclohexene and cyclohexa-1,3-diene with sulphur dioxide have been prepared [poly-1,2-(cyclohexane)sulphone and poly- 1,4-(cyclohexa-2-ene)sulphone, respectively], and a study made of their aromatization. It was found that the latter copolymer only could be partially aromatized by using bromine-sulpholane, sulphur-dimethylformamide or selenium dioxide-decalin. The properties of the polymers are discussed in relation to the proportion of aromatic character. The scope and limitations of introducing aromatic rings into a polymer chain, by an addition polymerization of cyclohexyl derivatives followed by dehydrogenation, are discussed.     

Cyclo dehydration reaction of polyhydrazides. I. Kinetic parameters obtained with nonisothermal thermogravimetry

The thermal conversion reaction of poly-(1,3-phenyl-1,4-phenyl)-hydrazide into poly-(1,3-phenyl-1,4-phenyl)-1,3,4-oxadiazole has been studied using thermogravimetry (TG). For the evaluation of the energie of activation and other kinetic parameters of this cyclo dehydration reaction a method developed by Ozawa was used, where polymer samples are heated with different constant heating rates. With this method the energy of activation can be determined accurately as a function of the degree of conversion. In this way a parallel reaction could be observed starting at the end of the nonisothermal conversion process. The polymer was used in two different morphological states, a powder and a film. A slightly higher energy of activation and a considerably higher pre-exponential factor were observed for the film indicating a dependency of the kinetics on the morphological state or on the history of the polymer sample.     

Cyclo dehydration reaction of polyhydrazides. II. Kinetic parameters obtained from isothermal thermogravimetry

The kinetics of the thermal conversion reaction of poly-(1,3-phenyl-1,4-phenyl)-hydrazide into poly-(1,3-phenyl-1,4-phenyl)-1,3,4-oxadiazole have been studied with isothermal thermogravimetry in continuation of a study with nonisothermal thermogravimetry described in a previous paper. Although the isothermal measurements are much more time-consuming, they provide some new information and insight about the cyclo dehydration reaction of the polyhydrazide. The physical state of the sample, rubbery or glassy, seems to influence the kinetics considerably. The kinetic parameters determined with the isothermal method for the polymer in its glassy state agree well with the parameters derived from the previously reported nonisothermal measurements, while the kinetic parameters for the expected rubbery state differ considerably. The morphological state or the history of the polymer has also a considerable influence on the kinetics of the isothermal conversion process. The powder form of the polymer has a much lower isothermal conversion rate than the film form.     

Composite films based on polyphenylene oxide modified with endofullerenes C60 with encapsulated iron atoms

Russian Journal of Applied Chemistry - New diffusion membranes were prepared by introducing endofullerenes with encapsulated iron atoms, Fe@C60, into the poly-2,6-dimethyl-1,4-phenylene oxide...     

Chemical stability and characterization of rhodium-diisocyanide coordination polymers

Poly-[Rh(1,4-phenylene diisocyanide)+4/2(Cl)-] has a two-dimensional template structure, where Rh atoms are bonded by the -conjugated 1,4-phenylene diisocyanide (pdi) ligands in the x-y plane and through overlapping dz orbitals in the z direction. The more conductive metallic bonds in the z direction create anisotropy in the electrical conductivity. The anisotropy and unique geometry of poly-[Rh(pdi)+4/2(Cl)-] make it a useful test bed for examining the relationship between electrical properties and chemical stability in metal-isocyanide molecular wire systems. The bulk powder of poly-[Rh(pdi)+4/2(Cl)-] is estimated to have a room-temperature bulk conductivity of 3.4 x 10(-11) S x cm(-1), an electrical activation energy of 0.9 eV, and a dielectric constant of 7.5. In this paper, impedance spectroscopy and X-ray powder diffraction were used to show the dependence of the electrical conductivity on the metal-metal bonding of pressed bulk powders of poly-[Rh(pdi)+4/2(Cl)-]. Thermo-gravimetric analysis and X-ray photoelectron spectroscopy were used to demonstrate air sensitivity in the polymer and elucidate the mechanism of oxidative degradation.     

Synthesis and crystal structure of cyclotris-(4,4′-thiodiphenylene ketone)

The side reaction of macrocyclization that occurs during the synthesis of poly-(1,4-phenylenesulfide ketone) by polycondensation of a 4,4-dihalobenzophenone with sodium sulfide was studied. It was found that the major product of this reaction is a cyclic trimer, cyclotris-(4,4"-thiodiphenylene ketone) (1). Despite the fact that ketone bridges are more rigid than sulfide bridges, the yield of the macrocycle is rather high, as it is in the synthesis of poly-(1,4-phenylenesulfide), and reaches 20% under high dilution conditions. The structure of 1 was investigated by X-ray diffraction analysis (R = 0.069 on 3138 reflections). Macrocycle 1 is strongly flattened in the crystal; the conformation observed is determined by the packing, since stereochemical analysis indicates high flexibility of the macrocycle. The solvate acetone molecules incorporated in the crystal are disordered, nevertheless, they are strongly fixed in the cavities and channels of the crystal structure.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1460–1466, August, 1994.     

Adiabatic compressibility of polymer solutions—III. Poly-2,6-dimethyl-1,4-phenyleneoxide in toluene and butanol-toluene mixtures

Adiabatic compressibility data for solutions of poly-2,6-dimethyl-1,4-phenyleneoxide in toluene and toluene-butanol mixtures are reported as a function of concentration. The differences between the observed and calculated values of the compressibility are attributed to polymer-solvent interactions. Comparison of the magnitude of the incremental compressibility and viscosity variation for the isomeric butanol-toluene-polymer solutions enabled investigation of the effects of steric interactions on the solvation process.     

Improved expression of the mean-square radius of gyration, 3. 1,4-polydienes

The mean-square radii of gyration of cis- and trans-1,4-polybutadiene and corresponding 1,4-polyisoprene were derived using Abe's and Flory's rotational isomeric scheme. Calculations performed using available experimental data showed that the dependence of the mean-square radius of gyration on the molecular weight for these stereoregular polydienes can be expressed as where a and b are constants characteristic of the polymer. This behaviour is analogous to that of vinyl polymers and poly-1,1-disubstituted ethylenes discussed in the preceding papers of the present series. The mean-square radius of gyration of 1,4-polyisoprene with predominantly trans units is more sensitive to stereoirregularity than with predominantly cis units. However, 1,4-polybutadiene chains are comparatively insensitive to the stereochemical composition.     

A new type of photodegradable polymer having a pyrazine moiety in the chain

Photooxidative degradation of poly-2,5-distyrylpyrazine (poly-DSP) has been studied in detail. Both amorphous poly-DSP film and poly-DSP solution were photooxygenated and degraded by irradiation by sunlight in the air. The nitrile group was formed, together with carbonyl groups and hydroxyl group. The photodegradation of a pyrazine derivative to a nitrile derivative is a new reaction. Next, photodegradation behavior of polymers having a cyclobutane moiety in the main chain, poly-1,4-bis[2-(2-pyridyl)-vinyl]benzene (poly-P2VB) and polydiethyl p-phenylenediacrylate (poly-p-PDA Et), was studied. The photodegradability of these polymers decreases in the order: poly-DSP > poly-P2VB ? poly-p-PDA Et. Further, the photodegradation behavior of various vinyl polymers containing a vinylpyrazine or vinylpyridine component and polyamides having pyrazine or pyridine ring in the main chain, was investigated. Of these, polyvinylpyrazine has the largest photodegradability.     

苯并二噁唑系列聚合物的合成及表征

以4,6-二氨基-1,3-苯二酚盐酸盐为原料,分别和对苯二甲酸、1,4-萘二甲酸、2,6-萘二甲酸、2,5-噻吩二甲酸、4,4-′(1,2-二苯基乙烯)二甲酸在多聚磷酸介质中反应,合成单环的聚(1,4-亚苯基)苯并二噁唑(PBO)、稠环的聚(1,4-亚萘基)苯并二噁唑(1,4-PNBO)和聚(2,6-亚萘基)苯并二噁唑(2,6-PNBO)、杂环的聚(2,5-亚噻吩基)苯并二噁唑(PTBO)及含有两个苯环的聚-4,4′-亚(1,2-二苯乙烯基)苯并二噁唑(4,4′-PDPEBO).采用傅立叶红外光谱、热重分析、元素分析、特性黏数分析对系列聚合物进行了表征.研究结果表明PBO、1,4-PNBO、4,4-′PDPEBO、2,6-PNBO和PTBO 5种聚合物的耐热性能依次降低,特性黏数依次为25.40、16.76、20.63、15.38和14.63 dL/g.     

Four-center type photopolymerization in the solid state. III. Polymerization of phenylene diacrylic acid and its derivatives

The solid-state photopolymerization of phenylene diacrylic acid (PDA) and its derivatives was studied as an application of solid-state photodimerization of cinnamic acid to photopolymerization of corresponding bifunctional molecule which has two cinnamic units in a single molecule. p- and m-PDA, and their esters and amides were prepared and investigated with respect to their photopolymerizability. Many of them have been found to polymerize into linear high polymers with the cyclobutane rings in the main chain on irradiation by ultraviolet or visible light. The polymerization process, the structure of the polymers, and their general properties were investigated in several ways. All the polymers are very similar to poly-2,5-distyrylpyrazine and poly-1,4-bis(β-pyridyl-2-vinyl) benzene with respect to their polymerization behavior, polymer structure, and some polymer properties: these polymers are soluble in a limited number of solvents, they have a high melting point and an extremely high crystallinity. On the basis of chemical behavior of poly-PDA and its phenyl ester the possible steric configurations of these polymers are discussed. It is demonstrated for the PDA series that solid-state dimerization can be generally extended to solid-state photopolymerization of the compound having two dimerizable units in a single molecule, although the crystal structure renders polymerization impossible in certain cases.     

Sequence-Controlled Catalytic One-Pot Synthesis of Siloxane Oligomers

Silicones are highly valuable poly- and oligomeric materials with a broad range of applications due to their outstanding physicochemical properties. The core framework of silicone materials consists of siloxane (Si−O−Si) bonds, and thus, the development of efficient siloxane-bond-forming reactions has attracted much attention. However, these reactions, especially “catalytic” siloxane-bond-forming reactions that enable the selective formation of unsymmetrical siloxane bonds, remain relatively underdeveloped. On the other hand, controlled iteration has become a powerful tool for the sequence-controlled synthesis of poly- and oligomeric compounds. Recently, control over the siloxane sequence has been achieved by the one-pot iteration of a B(C₆F₅)₃-catalyzed dehydrocarbonative cross-coupling of alkoxysilanes with hydrosilanes and a B(C₆F₅)₃-catalyzed hydrosilylation of carbonyl compounds. Thus, it is now possible to generate linear, branched, and cyclic sequence-specific oligosiloxanes in a highly selective manner under chloride-free conditions.     

用稀土催化剂合成顺-1,4-聚-2,3-二甲基丁二烯

<正> 我们的工作及文献证明,稀土催化剂可使丁二烯、异戊二烯及1,3-戊二烯聚合生成顺-1,4聚合物,而对2,4-己二烯则可得到反-1,4-苏式-双全同立构聚合物(trans-1,4-threo-diisotactic polyhexadiene),为了进一步弄清稀土催化剂对不同双烯烃的催化聚合活性以及所得聚合物的结构与单体性质的关系,我们研究了2,3-二甲基丁二烯在三元催化剂Nd(naph)_3-AlEt_2Cl-Al(-Bu)_3作用下的聚合及所得聚合物的结构。     

Helix-sense selective polymerization of carbodiimides: building permanently optically active polymers from achiral monomers

The helix-sense selective polymerization of achiral monomers by homochiral catalysts was investigated. Polymerization of chiral carbodiimides (N-(R)-2,6-(dimethylheptyl)-N'-phenylcarbodiimide) by achiral catalysts yields polymers that undergo mutorotation at elevated temperatures, thus illustrating that these chains are formed under kinetic rather than thermodynamic control. Building on this observation, the polymerization of achiral carbodiimides by (S-BINOL)Ti(OiPr)2, I, was studied. Monomers (N-hexyl-N'-(X)carbodiimide, where X = isopropyl (3), hexyl (4) or phenyl (5)), N-methyl-N'-(2-methyl-6-isopropylphenyl)carbodiimide, 6, and N-dodecyl-N'-(1-naphthyl)carbodiimide, 7, were all polymerized with I in good yields (86-95%), and all showed varying degrees of asymmetric induction. Poly-3, -4, and -5 racemized upon heating at elevated temperatures, but poly-6 and poly-7, bearing nonsymmetric phenyl groups, yielded optically active polymers that could not be racemized even at elevated temperatures. Thin films of poly-7 were found to be highly opalescent.     

Determination of carbonyl-containing functional groups in oxidized polyethylene

A combined (chemical and infrared (IR) spectrophotometric) method is discussed for the simultaneous determination of concentrations of carboxyl (A), ketone (K), and ester (E) groups formed in the oxidation of polyethylene (PE). The IR absorptivities of these functional groups were determined by using model compounds [stearic acid, stearone, poly-(1,4-butylene sebacate)]. The integral absorption of the C?O band of polymer samples which contained several oxo groups of different types was found to be additive. This method was applied to the determination of the carboxyl, ester, and ketone content of samples oxidized at different oxygen pressures.     

Synthesis and Reactions of 1,4‐Anhydrogalactopyranose and 1,4‐Anhydroarabinose – Steric and Electronic Limitations

Scope and limitations of 1,4‐anhydro sugars as precursors of glycofuranosyl building blocks are described. The experiments revealed that the choice of the substituents is very important for an efficient preparation as well as a successful ring‐opening reaction of 1,4‐anhydro sugars. DFT Calculations suggest that selective protonation of 1,4‐anhydro sugars is the key to the selective ring opening in order to afford only furanosides.     

Water as an additive for selective synthesis of saturated 1,4-diketones and tetrasubstituted furans directly from 1,4-enediones

Water-controlled and phosphine-mediated selective synthesis of saturated 1,4-diketones and tetrasubstituted furans has been developed directly from 1,4-enediones. Saturated 1,4-diketones were selectively obtained in acetone with water as an additive, whereas tetrasubstituted furans were selectively obtained in anhydrous 1,2-dichloroethane. A large variety of functional groups are tolerated under these reaction conditions, including electron-rich, electron-poor, halogen, and heteroaryl substituents. This method also has significant advantages in easily available substrates, mild reaction conditions, and high reaction efficiency.