Reactivity Ratios of Diethyldiallylammonium Chloride with Acrylamide or Acrylic Acid

The compositions of copolymers of diethyldiallylammonium chloride (DEDAAC) with acrylamide (AM), acrylic acid (AA) or sodium acrylic acid (NaAA) at low conversion were determined by elemental analysis, and the reactivity ratios of monomers in copolymerization were obtained by Kelen-Tudos method. The results showed that the reactivity ratios rDE and rAM are 0.31 and 5.27 for DEDAAC with AM, rDE and rAA are 0.28 and 5.15 for DEDAAC with AA, and rDE and rNaAA are 0.40 and 3.97 for DEDAAC with NaAA, respectively. The copolymerizations for DEDAAC with AM, AA or NaAA are non-ideal copolymerization and the products are random copolymers.     

二乙基二烯丙基氯化铵与丙烯酰胺、丙烯酸共聚竞聚率

二乙基二烯丙基氯化铵;丙烯酰胺;丙烯酸;共聚合;竞聚率     

Effect of the Properties of Polyelectrolytes on Their Catalytic Behavior. I

The hydrolysis-catalyzing effect in starch hydrolysis of soluble copolymeric acids prepared from mixtures of acrylic acid and acrylamide of various ratios was investigated in experiments carried out with acrylic acid: acrylamide copolymers in ratios of 105, 10:2, and 10:1 at temperatures of 100, 105, 110, 115, and 120°C at an initial pH value of 3.2. A mean value of 32,610 cal/mole was obtained, on calculating the activation energies from the initial reaction rates. This is in fair agreement with the data observed in the hydrolyses conducted with other acids.     

Direct Synthesis of Double Hydrophilic Statistical Di‐ and Triblock Copolymers Comprised of Acrylamide and Acrylic Acid Units via the MADIX Process

Double hydrophilic statistical, diblock and triblock copolymers comprised of acrylamide and acrylic acid units have been synthesized in aqueous medium using the MADIX process. Starting from an either monofunctional or difunctional xanthate, the resulting AB and ABA‐type double hydrophilic block copolymers (DHBC) exhibited molar masses predetermined by the initial monomer/xanthate precursor molar ratio and polydispersity indices in the range 1.2–1.5. Batch copolymerizations yielded well‐defined statistical copolymers that were chain‐extended for the synthesis of novel poly‐ (acrylic acid‐stat‐acrylamide)‐block‐polyacrylamide DHBC.     

Photocatalytic degradation of poly(acrylamide-co-acrylic acid)

Poly(acrylamide-co-acrylic acid) copolymers of different compositions were synthesized and characterized. The copolymers were statistical with a relatively high percentage of acrylamide units, as determined by (13)C NMR. Reactivity ratios calculated by the Finemann-Ross and Kelen-Tudos methods showed that the copolymers were random with a reactivity ratio of r AM = 3.76 and r AA = 0.28. The photolytic and photocatalytic degradation of the copolymers and the homopolymers was conducted in the presence of combustion-synthesized nano anatase titania. The degradation of the copolymer in the presence of combustion-synthesized titania was significantly higher than that observed in the presence of commercial titania, Degussa P-25. The degradation was modeled by using continuous distribution kinetics by following the time evolution of molecular weight distribution. The degradation follows a two step mechanism, wherein the rapid first step comprises the scission of weak acrylic acid units along the chain which is followed by the breakage of relatively strong acrylamide units. The rate constants for the weak and strong links follow a linear trend with the percentage of acrylic acid and acrylamide in the copolymer, respectively. This linear variation can be correlated with a similar trend observed for the activation energies obtained for the pyrolytic degradation of the polymers.     

Polymerization and copolymerization in associated monomer aggregates

The polymerization of acrylic acid in bulk is controlled by linear plurimolecular H-bonded aggregates of the monomer which lead to the formation of a syndiotactic polymer. Polar solvents do not dissociate these aggregates unless high dilutions are reached. In contrast, “normal” kinetics are observed in the presence of 10–20 per cent toluene, n-hexane or chloroform. The polymerization of methacrylic acid is not affected to the same extent by molecular aggregates. In the copolymerization of acrylic acid with methyl acrylate or acrylonitrile, the reactivity ratios are altered by solvents. The acrylic acid content is higher in copolymers formed in bulk than in toluene solution. But similar effects are observed in the presence of DMF which does not dissociate the aggregates of acrylic acid; moreover, copolymerization data obtained with methacrylic acid indicate that other factors may be involved in determining reactivity ratios.Acrylamide also forms H-bonded aggregates and its copolymerization behaviour is strongly affected by solvents. No simple correlation holds, however, between reactivity ratios and extent of association.A very strict control of chain propagation occurs when 4-vinylpyridine is polymerized in the presence of polycarboxylic acids. A considerable rate increase was observed when vinylpyridine was grafted into polytetrafluoroethylene films which contained poly(acrylic acid) branches. This effect is explained by assuming that the pyridine groups form strong associations with the carboxylic sites, thereby providing a very favourable orientation of the vinyl groups for chain propagation.     

Calculation of Reactivity Ratios and Sequence Distributions in Copolymers from Monomers 13C-NMR Data

A screening procedure has been developed to predict the average sequence distribution in vinyl copolymers from monomer ¹³C-NMR data. The ¹³C-NMR absorption frequencies of the carbon atoms of the polymerizable double bond are used to calculate the Alfrey-Price Q and e values as previously described by Borchardt and Dalrymple. These, in turn, are used to calculate the monomer reactivity ratios. Reactivity ratios for 54 copolymerizations were calculated by this procedure and compared to literature values. The copolymer sequence distribution may then be determined by means of a computer program written by Harwood. The sequence distribution in copolymers of methacrylic acid and dimethyl-aminoethyl methacrylate, acrylonitrile and methyl methacrylate, 1,1-dichloroethylene and methacrylonitrile, ethyl acrylate and n-butyl methacrylate, and acrylamide and sodium 2-acrylamido-2-methylpropane sulfonate were calculated from reactivity ratios derived from ¹³C-NMR data and compared to literature values. This procedure may be used to calculate the reactivity ratios from ¹³C-NMR spectra of monomers for which no Q and e values are known. By this method the average sequence distribution of such monomers in copolymers may be predicted, significantly reducing the number of copolymers to be synthesized and tested for use in various applications.     

Fluorescence and viscometry study of complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide)

Interpolymer complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide) was studied by fluorescence spectroscopy and viscometry in dilute aqueous solutions. Changes in chain conformation and flexibility due to the interpolymer association are reflected in the intramolecular excimer fluorescence of pyrene groups covalently attached to the polymer chain. Both poly(acrylamide) and hydrolysed poly(acrylamide) form stable complexes with poly(acrylic acid) at low pH. The molecular weight of poly(acrylic acid) and solution properties such as pH and ionic strength were found to influence the stability and the structure of the complexes. In addition, the polymer solutions mixing time showed an effect on the mean stoichiometry of the complex. The intrinsic viscosity of the solutions of mixed polymers at low pH suggested a compact polymer structure for the complex.     

Optimal estimation of reactivity ratios for acrylamide/acrylic acid copolymerization

Reactivity ratios for the important acrylamide (AAm)/acrylic acid (AAc) copolymerization system exhibit considerable scatter in previously published literature, and therefore, there is a need for more definitive values for these reactivity ratios. An appropriate methodology, based on the error‐in‐variables‐model (EVM) framework along with a direct numerical integration procedure, is applied in order to determine reliable reactivity ratios. The reliability of the results is confirmed with extensive and independent replication. Furthermore, via an EVM‐based criterion for the design of experiments using mechanistic models, optimal feed compositions are calculated, and from these optimal reactivity ratios are estimated for the first time (r_AAm = 1.33 and r_AAc = 0.23) based on information from the full conversion range. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4819–4827     

Characteristics of Heterophase Graft Copolymerizations

Abstract

Persulfate-initiated graft copolymerizations of glutaraldehyde crosslinked gelatin with acrylic acid, acrylamide, vinyl acetate, and methyl methacrylate in the aqueous phase were investigated. It was observed that percentage grafting, molecular weights of the grafts, and grafting efficiencies were greatly influenced by the nature of the monomers. Hydrophilic monomers gave a higher frequency of grafting but lower molecular weights. While the frequency of grafting with hydrophobic monomers was low, the molecular weights of the grafts were comparatively high. The results are explained in terms of microdomain kinetics, similar to those encountered in emulsion or suspension polymerizations.     

Ethyl Acrylate‐Hydroxyethyl Acrylate and Hydroxyethyl Acrylate‐Methacrylic Acid: Reactivity Ratio Estimation from Cross‐linked Polymer Using High Resolution Magic Angle Spinning Spectroscopy

Solution free radical copolymerizations of hydroxyethyl acrylate/methacrylic acid (HEA/MAA) and ethyl acrylate/hydroxyethyl acrylate (EA/HEA) have been conducted in m‐xylene (60 wt% solvent level) over the temperature range of 70–130°C using tert‐butyl peroxybenzoate as initiator. High resolution magic angle spinning spectroscopy (HR–MAS) and 2D–NMR have been utilized to characterize the copolymer gel for copolymer composition. The reactivity ratio values have been determined from low conversion copolymer composition data using the computer software package RREVM, which is based on the error in variables model (EVM) method. Also, Arrhenius‐type reactivity ratio expressions have been developed that describe how reactivity ratios vary with temperature.     

二乙基二烯丙基氯化铵均聚及其与丙烯酰胺或丙烯酸共聚动力学研究

采用膨胀计法研究了以过硫酸铵为引发剂,二乙基二烯丙基氯化铵(DEDAAC)在水溶液中的均聚及其与丙烯酰胺(AM)和丙烯酸(AA)共聚动力学,测定了相应的聚合表观活化能;采用元素分析法测定了DEDAAC分别与AM和AA在低转化率下共聚物的组成,并采用氯离子选择性电极法测定了DEDAAC-AM共聚物中的氯离子含量,按Kelen-Tudos方法求得了相应的竞聚率.结果表明,DEDAAC均聚速率方程为RP=k[M]0.99[I]0.76,表观活化能Ea=77.00kJ/mol,说明链终止为单基终止和双基终止并存,引发过程与单体浓度无关;DEDAAC与AM在摩尔比为4∶1时,共聚动力学方程为RP=[M]2.53[I]0.90,表观活化能Ea=67.06kJ/mol,单体竞聚率为rDE=0.31±0.02、rAM=5.27±0.53;DEDAAC与AA在摩尔比为4∶1时,共聚动力学方程为RP=k[M]2.94[I]0.83,表观活化能Ea=70.07kJ/mol,竞聚率为rDE=0.28±0.03、rAA=5.15±0.28;DEDAAC与AM和AA等共聚为非理想共聚,得到的产物均为无规共聚物.     

Effect of pH on the reactivity ratios in aqueous solution copolymerization of acrylic acid and N-vinylpyrrolidone

Acrylic acid (AA) and N-vinylpyrrolidone (NVP) were copolymerized in aqueous solution at 30°C in the pH range 4–9 and the monomer reactivity ratios (r₁ for AA and r₂ for NVP) were determined as a function of pH from the high conversion data by using both the differential (YBR) and the integrated copolymerization equations. The value of r₁ decreased from 5.2 at pH 4 to a minimum of 1.3 at pH 5 and then increased to 8.1, 6.6, and 7.2 at pH 7, 8, and 9, respectively. Addition of 1M NaCl at pH 6.5 restored the r₁ nearly to that at pH 4, the predominantly un-ionized acid. The r₂ values for NVP were nearly zero at all pH values except at pH 5. The variation of the reactivity ratios with pH was examined in terms of the electrostatic interactions between the ionized monomer molecules, the rate of homopolymerization of acrylic acid, and the cation binding to the poly(acrylic acid) molecules. The r₂ values for NVP compared favorably with the literature values reported in bulk and organic solvent systems, although r₁ values are much higher.     

A density functional study on dielectric properties of acrylic acid grafted polypropylene

Influence of acrylic acid grafting of isotactic polypropylene on the dielectric properties of the polymer is investigated using density functional theory (DFT) calculations, both in the molecular modeling and three-dimensional (3D) bulk periodic system frameworks. In our molecular modeling calculations, polarizability volume, and polarizability volume per mass which reflects the permittivity of the polymer, as well as the HOMO-LUMO gap, one of the important measures indicating the electrical breakdown voltage strength, were examined for oligomers with various chain lengths and carboxyl mixture ratios. When a polypropylene oligomer is grafted with carboxyl groups (cf. acrylic acid), our calculations show that the increase of the polarizability volume α' of the oligomer is proportional to the increase of its mass m, while the ratio α'/m decreases from the value of a pure polymer when increasing the mixture ratio. The decreasing ratio of α'/m under carboxyl grafting indicates that the material permittivity might also decrease if the mass density of the material remains constant. Furthermore, our calculations show that the HOMO-LUMO gap energy decreases by only about 15% in grafting, but this decrease seems to be independent on the mixture ratio of carboxyl. This indicates that by doping polymers with additives better dielectric properties can be tailored. Finally, using the first-principles molecular DFT results for polarizability volume per mass in connection with the classical Clausius-Mossotti relation, we have estimated static permittivity for acrylic acid grafted polypropylene, assuming the structural density keeping constant under grafting. The computed permittivity values are in a qualitative agreement with the recent experiments, showing increasing tendency of the permittivity as a function of the grafting composition. In order to validate our molecular DFT based approach, we have also carried out extensive three-dimensional bulk periodic first-principles total-energy calculations in the frameworks of the density functional theory and density functional perturbation theory (DFPT) for crystalline acrylic acid grafted polypropylene. Interestingly, the computed electronic and dielectric properties behave very similarly between the simplified molecular DFT modeling and the more realistic 3D bulk periodic DFPT method. In particular, the static permittivity values [ε(r)(0)] from the molecular DFT-Clausius-Mossotti modeling are in excellent agreement with the high-frequency dielectric constant values (ε(∞)) from the DFPT method. This obviously implies that the chain-to-chain interaction to dielectric and electronic properties of acrylic acid polypropylene, to a first approximation, can be neglected, therefore justifying the usage of molecular DFT modeling in our calculations.     

Kinetics of copolymerization—X: Investigation of the copolymerizations acrylonitrile with the sodium and ammonium salts of allyl sulphonic acid in dimethyl formamide solution

Sodium and ammonium salt of allyl sulphonic acid have the same characteristics in radical copolymerizations with acrylonitrile in dimethyl formamide solution. In these cases, the copolymer composition equation does not adequately describe the copolymerization process; this is manifested in the fact that the reactivity ratios change with the initial monomer ratio.     

Modification of liposome surface with pH-responsive polyampholytes for the controlled-release of drugs

Ampholytic polymers comprised of 2-(diethylamino)ethyl methacrylate (DEAEMA) and acrylic acid (AA) in varying molar ratios were used to modify egg yolk phosphatidylcholine (EYPC) liposomes previously encapsulated with pyranine. The modified EYPC liposomes were found to be pH responsive. The critical pH values at which the pyranine release from these liposomes at 37 °C were observed to decrease with increasing DEAEMA content in the polymers. Explanations were given for these phenomena.     

Monte Carlo Study of Binary Copolymerizations. 2. The Determination of Reactivity Ratios,Applications

This paper discusses an improved and efficient version of the MEMØRY-7 computer program described in a previous paper. The program, called MEMØRY-7/1, implements a Monte Carlo algorithm to compute reactivity ratios in binary irreversible copolymerizations. For the copolymerization of acrylic acid and methyl acrylate, the computed r₁, r₂ values (r₁ = 1.374, r₂ = 1.038) compare quite well with experimentally determined ones (r₁ = 1.4, r₂ = 1.0; Eldridge and Treloar).     

The effect of Ca,Sr and Ba cations on the reactivities of acrylic acid salts and acrylamide in copolymerization in an aqueous medium

It is shown that, in copolymerizations of acrylamide with Ca, Sr and Ba acrylates in aqueous media, monomer reactivity ratios and overall copolymerization rates depend on the nature of the cation in the acrylate salt. The effect of cations is attributed mainly to electrochemical interactions between growing macroradicals and acrylate anion; these interactions in turn are affected by specific bonding of Ca, Sr, Ba cations by PAA segments of macroradicals.     

Free-radical polymerization in micellar media: Effect of microenvironment

A micellar polymerization process has been used to prepare polyacrylamide or poly(acrylic acid) hydrophobically modified with low amounts (1–5 mol%) of an N-alkyl- or N-alkylarylacrylamide. The effect of the initial monomer segregation on the copolymer microstructure and the copolymerization mechanism has been investigated. This method leads generally to multiblock copolymers in which the number and length of the hydrophobic blocks vary with the initial number of hydrophobes per micelle. Interestingly, the copolymerization of acrylamide with disubstituted acrylamides leads to homogeneous samples with an average copolymer composition independent of the degree of conversion, in contrast to what is observed with monosubstituted acrylamides for which a drift in composition is observed. The difference in polarity between the bulk phase and the micellar phase is responsible for this behavior. This microenvironment effect modifies the reactivity ratios of those hydrophobes capable of forming hydrogen bonds, whereas the reactivity of the other hydrophobes remains unaffected.     

离子键交联的聚两性电解质凝胶在不同pH和不同电解质溶液中溶胀行为研究

以丙烯酸(AA)和甲基丙烯酸二乙氨基乙酯(DEAM)形成的离子复合物与丙烯酰胺(AAm)共聚,合成了一种新型的离子键交联的聚两性电解质凝胶(PADA).由于分子之间的氢键作用,PADA凝胶并不是在A/C(负正离子单体摩尔比)为1,而是在A/C为1.55处有最大消溶胀.与共价键交联的聚两性电解质凝胶相比,PADA凝胶的溶胀行为具有更强的pH敏感性.PADA凝胶在不同pH缓冲溶液中的溶胀行为表明,在pH 3~4之间消溶胀程度最大.在偏离该pH区域时凝胶均发生溶胀.但凝胶的溶胀程度在pH<3的酸性溶液中随A/C的增加而降低;而在pH>4的偏碱性溶液中随其增加而增加.在不同价数的离子溶液中,离子浓度对于PADA凝胶的平衡溶胀有着不同的影响.对于一价的NaCl溶液,PADA凝胶有典型的反聚电解质效应.但对于高价的CaCl2和柠檬酸三钠溶液,只在较低的浓度下,才表现出反聚电解质效应.而在较高盐浓度时,随盐浓度的增加其溶胀比反而降低.这可能与高价离子形成的离子键交联有关.与pH对PADA凝胶溶胀程度的影响相似,在CaCl2溶液中,PADA凝胶的溶胀程度随A/C的增加而降低;而在柠檬酸三钠溶液中则刚好相反.这种独特的溶胀行为似乎与高价离子电荷的正负性有关.