Koordinationseigenschaften von Carbaboranylchlorophosphanen: Synthese und Molekülstruktur von cis-rac-Molybdäntetracarbonyl{1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaboran(12)}

Coordination Properties of Carbaboranylchlorophosphines: Synthesis and Molecular Structure of cis-rac -Molybdenumtetracarbonyl{1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaborane(12)} Rac-1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaborane(12) ( 1 ) reacts with [Mo(CO)₄(NBD)] (NBD = norbornadiene) after several hours at 50–55 °C to yield cis-rac-[Mo(CO)₄{1,2-(PPhCl)₂C₂B₁₀H₁₀}] ( 2 ). 2 was characterised spectroscopically (¹H, ¹³C, ¹¹B and ³¹P NMR) and by crystal structure determination.     

Synthesis of 1,2-bis(methoxyamino)cycloalkanes from alicyclic 1,2-bis(hydroxyamines)

Derivatives of 1,4-dihydroxypiperazine-2,3-dione were obtained by reaction of cis-1,2-bis(hydroxyamino)cycloalkanes with diethyl oxalate. Their alkylation with CH₂N₂ or Mel afforded 1,4-dimethoxypiperazine-2,3-diones. Hydrolysis of the latter gave 1,2-bis(methoxyamino)cycloalkanes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 925–929, April, 1996.     

Bis(2-mercaptobenzoxazolato)mercury(II) and bis(2-pyridinethiolato)mercury(II) complexes as carriers for thiocyanate selective electrodes

Highly selective poly(vinyl chloride) (PVC) membrane electrodes based on bis(2-mercaptobenzoxazolato)mercury(II) [Hg(MBO)₂] and bis(2-pyridinethiolato)mercury(II) [Hg(PT)₂] complexes as new carriers for thiocyanate-selective electrodes are reported. The electrodes were prepared by coating the membrane solution containing PVC, plasticizer, carriers and additives on the surface of graphite electrodes. Influence of the membrane composition, pH and possible interfering anions were investigated on the response properties of the electrodes. Both sensors exhibited Nernstian responses towards thiocyanate over a wide concentration range of 1×10⁻⁶ to 0.1 M, with slopes of 60.6±0.8 and 57.5±1.2 mV per decade of thiocyanate concentration for Hg(MBO)₂ and Hg(PT)₂ carriers, respectively, over a wide pH range of 3-11. The limit of detection for both electrodes was ∼6×10⁻⁷ M. The sensors have response times of ≤5 s and can be used for at least 2 months without any considerable divergence in their potential response. The proposed electrodes show fairly good discrimination of thiocyanate over several inorganic and organic anions. The electrodes were successfully applied to direct determination of thiocyanate in saliva and as indicator electrodes in precipitation titrations.     

Synthese und Kristallstruktur von Bis(1,2-dimethyl-5-nitro-imidazol)dichlorocobalt(II)

Synthesis and Crystal Structure of Bis(1,2-dimetyl-5-nitro-imidazole)dichlorocobalt(II) Bis(1,2-dimethyl-5-nitro-imidazol)dichlorocobalt(II) was obtained by reaction of CoCl₂ · 6 H₂O with 1,2-dimethyl-5-nitro-imidazole in methanol. The compound forms blue crystals which were characterized by IR and UV-vis spectroscopy and by an X-ray crystal structure determination. Co(C₅H₇N₃O₂)₂Cl₂: tetragonal, space group I4 2d, Z = 8, a = 1142.1(1) pm, c = 2577.3(2) pm. R = 0.036 for 670 independent reflexions. The Co atom is tetrahedrally surrounded by two chlorine and two N atoms at distances of 222.8(2) and 203.5(4) pm.     

1,2-Bis(dimethylamino)-3,4,5-triphenyl-3,4,5-triphospha-1,2-diborolan und 1,2-Bis(dimethylamino)-3,4,5,6-tetra-tbutyl-3,4,5,6-tetraphospha-1,2-diborin: Synthese und Struktur sowie Berechnungen zur Molekülstruktur

1,2-Bis(dimethylamino)-3,4,5-triphenyl-3,4,5-triphospha-1,2-diborolane and 1,2-Bis(dimethylamino)-3,4,5,6-tetra-tbutyl-3,4,5,6-tetraphospha-1,2-diborine: Synthesis and Structure as well as Calculations on the Molecular Structure The diphosphides K₂[(C₆H₅)P? (C₆H₅)P? P(C₆H₅)], 4 or K₂[(tBuP)? (tBuP)₂? P(tBu)], 5 , react with (ClBNMe₂)₂ to form the binary 5-membered ring system 1,2-bis(dimethylamino)-3,4,5-triphenyl-3,4,5-triphospha-1,2-diborolane (C₆H₅P)₃(BNMe₂)₂, 2a , and the 6-membered ring system 1,2-bis(dimethylamino)-3,4,5,6-tetra-tbutyl-3,4,5,6-tetraphospha-1,2-diborine, (tBuP)₄(BNMe₂)₂, 3a , respectively. 2a and 3a could be obtained in a pure form and characterized NMR spectroscopically and by X-ray structure analyses. The two ring systems are folded; 2a exists in the ?envelope”?- 3a in the ?boat”?-conformation. Ab initio computations for 3,4,5-triphospha-1,2-diborolane M5 show that the global minimum is characterized by one B? P double bond. The parent compound geometry M6 is characterized by transannular bonding in the PH? BH? BH? PH moiety which differs in character from those in the four- and five-membered rings (BH)₂(PH)₂ and (BH)₂(PH)₃ M5 d , respectively. Explicit calculation of the influence of amino substituents on boron improved agreement of the bond length between computed and X-ray data.     

Syntheses of substituted 8-(aminobenzyl)dinaphthodioxaphosphocine 8-oxides

Substituted (8-aminobenzyl)dinaphthodioxaphosphocine 8-oxides were prepared in a two-step process. The first step of the reaction is one-pot synthesis of α-aminophosphonates by the reaction of aldehydes, amines, and trialkyl phosphite in the presence of ceric ammonium nitrate. The second step is cyclization of α-aminophosphonates with bis(2-hydroxy-1-naphthyl)methane in the presence of a catalytic amount of p toluenesulphonic acid under reflux conditions. Their structures were established by elemental analyses, IR, ¹H, ¹³C, ³¹P NMR, and mass spectral data. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, 1574–1580, September, 2007.     

双[1,2-二(三氟甲基)乙烯-1,2-二硫基]镍与丁二烯反应的溶剂效应

采用密度泛函理论(DFT)在B3LYP/6-31G(d)水平上研究了双[1,2-二(三氟甲基)乙烯-1,2-二硫基]镍(Ni[S2C2(CF3)2]2)与丁二烯的反应机理.采用极化连续介质模型(PCM),考察了溶剂对各反应驻点的电荷分布、偶极矩、溶剂化自由能的影响.计算结果表明:Ni[S2C2(CF3)2]2与丁二烯的反应为前线轨道对称性匹配的协同反应,溶剂介电常数的增大有利于稳定各反应驻点.同时在同种溶剂中,过渡态和产物稳定的程度大于反应物,从而反应更加容易进行.     

Photochromic dihetarylethenes. 10. Photochromic 1,2-bis[2-(benzothiazol-2-yl)-3-thienyl]- and 1,2-bis[2-(benzothiazol-2-yl)benzothiophen-3-yl]ethenes

Dithienylethenes containing the thiophene rings with benzothiazolyl substituents in position 2 were synthesized. 1,2-Bis[2-(benzothiazol-2-yl)benzothiophen-3-yl]hexafluorocyclopentene and 1,2-bis[2,5-di(benzothiazol-2-yl)-3-thienyl]hexafluorocyclopentene possess photochromic properties. The open forms of 1,2-bis(2-benzothiazolylhetaryl)ethenes fluoresce, but introduction of the benzothiazole rings into dihetarylethenes significantly lowers the fatigue resistance of photochromes and favors thermal reversibility.     

Synthesis and Structures of 1-(2-Thienylmethyl)-2-(2-thienyl)bezimidazole and Its Cu(I) and Ag(I) Complexes

N,N′-1,2-phenylenebis(2-thienylideneimine) (PTI) can be obtained via the condensation of o-phenylenediamine and thiophene-2-carboxaldhyde in cyclohexane. It isomerized to its cyclic form 1-(2-thienylmethyl)-2-(2-thienyl)benzimidazole (TMTBI) readily in the presence of Fe₂(CO)₉. Coordination reactions of PTI with cuprous iodide and silver nitrate in acetonitrile resulted in the formation of [Cu(TMTBI)I]₂ and [Ag(TMTBI)₂]NO₃, respectively, in which the PTI ligand had been isomerized to TMTBI. Both PTI, TMTBI, and complexes were characterized by NMR, IR, and Mass spectroscopies as well as elemental analysis. The crystal structures of TMTBI and [Cu(TMTBI)I]₂ were determined by single-crystal X-ray diffraction. Crystallographic details for X-ray structures are as follows. TMTBI is crystallized in the monoclinic space group P2₁/n with a = 8.953(3), b = 9.150(1), c = 17.436(2) Å, β = 93.73(2)°, and Z = 4. The final R factor was 0.050 (R_w = 0.066) for 1337 observed reflections. Complex [Cu(TMTBI)I]₂ is crystallized in the triclinic space group $ {\rm P}\bar 1 $ with a = 9.961 (2), b = 10.825(2), c = 9.184(2) Å, α = 112.98(2), β = 110.78(2), γ = 88.71 (2)°, and Z = 2. The final R factor was 0.056 (R_w = 0.057) for 2363 observed reflections.     

Synthesis and Characterisation of N,N′-Disubstituted 1,2-phenylenebis(amido)tin(II) Compounds; X-Ray structures of 1,2- and of [1,2- (tmeda)

Cyclic bis(amido)tin(II) compounds 1,2- [R = SiMe₃] ( 4 ), SiMe₂Bu^t ( 5 ) and CH₂Bu^t ( 6 )], as well as ( 4 )₂(μ-tmeda) 7 have been obtained either from (i) the corresponding dilithium compound 1,2-C₆H₄[N(R)Li]₂ 1–3 and SnCl₂ for 4–6 , respectively, (or for 4 ) 2 1 + [Sn(μ-Cl){N(SiMe₃)₂}]₂; or (ii) 1,2-C₆H₄[N(H)R]₂ + Sn[N(SiMe₃)₂]₂ for 4–6 ; or for 7 from 4 and tmeda. Compounds 4–6 are monomeric, yellow, thermochromic (becoming redder on heating), diamagnetic, crystalline and are lipophilic and sublimable in vacuo. Compound 7 is colourless. The molecular structures of 6 and 7 have been determined from single crystal X-ray diffraction data. Compound 6 crystallises in bimolecular aggregates, in which there is a weak η-C₆ … Sn contact.     

Structural and spectral characterization of two 1-phenyl-1,2-propanedione bis{N(4)-alkylthiosemicarbazones}

1-phenyl-1,2-propanedione bis{N(4)-methyl- and {N(4)-ethylthiosemicarbazone}, H₂Pm4M and H₂Pm4E, respectively, have been prepared, studied spectroscopically (¹H NMR, ultraviolet and infrared) and their crystal structures solved. Intermoiety hydrogen bonding does not occur in H₂Pm4M and H₂Pm4E, in contrast to the analogous bis{N(4)-thiosemicarbazones} prepared from 1-phenylglyoxal. The two thiosemicarbazone moieties are on the opposite side of the carbon–carbon backbone, but the N(4)Hs intramolecularly hydrogen bond to the imine nitrogen for each moiety.     

Synthesis and characterization of manganese(IV) and ruthenium(III) complexes derived from bis (2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone

Bis(2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone(naohH₄) interacts with manganese(II) acetate in methanol followed by addition of KOH giving [Mn^IV(naoh)(H₂O)₂]. Activated ruthenium(III) chloride reacts with naohH₄ in methanol yielding [Ru^III(naohH₄)Cl(H₂O)Cl₂]. The replacement of aquo by heterocyclic nitrogen donor in these complexes has been observed when the reaction is carried out in presence of heterocyclic nitrogen donors such as pyridine(py), 3-picoline(3-pic) or 4-picoline(4-pic). The molar conductance values in DMF for these complexes suggest non-electrolytic nature. Magnetic moment values suggest +4 oxidation state for manganese in its complexes, however, ruthenium(III) complexes are paramagnetic with one unpaired electron. Electronic spectral studies suggest six coordinate metal ions. IR spectra reveal that naohH₄ coordinates in enol-form and keto-form to manganese and ruthenium, respectively. ESR and cyclic voltammetric studies of the complexes have also been reported.     

Eine neue Synthese von Tetrachlordiphosphan sowie Untersuchungen zur 1,2-Addition an Cycloalkene

A New Synthesis of Tetrachlorodiphosphane and Investigations Concerning the 1,2-Addition to Cycloalkenes . The phosphorus subhalide P₂Cl₄ has been synthesized by co-condensation of PCl₃ and Cu vapour in 14% yield. The ³¹P-NMR chemical shift of P₂Cl₄ has the value of δ=155. P₂Cl₄ decomposes during several hours at 0°C in a N₂ atmosphere by a disproportionation process to yield PCl₃ and a yellow polymeric compound of the approximately composition (PCl)_x. P₂Cl₄ is flammable in air to give POCl₃ and (PCl)_x. Investigations regarding the addition of P₂Cl₄ to cyclooctyne, cyclohexene, and cyclohexa-1,4-diene has been carried out. Surprisingly, cyclooctyne does not react with P₂Cl₄ but cyclohexene as well as cyclohexa-1,4-diene undergo 1,2-addition to yield the trans-1,2-bis(dichlorophosphino) substituted carbonhydrides. By derivatization with Me₃Si—NMe₂ the corresponding trans-1,2-bis[bis(dimethylamino)phosphino] compounds are synthesized.     

Syntheses,crystal structures and properties of two cadmium coordination polymers containing bis (2-methylimidazol-1-yl)methane(2-mBIM) and bis (imidazol-1-yl)methane (BIM) ligands

Coordination polymers, {[Cd(2-mBIM)₃](ClO₄)₂} _n (1) and [Cd(BIM)₂(NO₃)₂] _n (2), have been prepared from the reaction of bis(2-methylimidazol-1-yl)methane(2-mBIM) with Cd(ClO₄)₂ and bis(imidazol-1-yl)methane (BIM) with Cd(NO₃)₂ in ethanol and water, respectively. Their structures were characterized by single crystal X-ray diffraction and IR spectroscopy. Compound 1 crystallizes in the rhombohedral space group R-3c with a = b = 12.3617(5) Å, c = 38.896(3) Å, γ = 120°, V = 5147.5(5) ų, z = 6. The Cd^II occupies a crystallographic inversion center and is coordinated by six N atoms from six distinct 2-mBIM ligands to form a slightly distorted octahedral geometry. Each 2-mBIM is coordinated to two Cd^II cations, linking alternatively four Cd^II cations, resulting in a 32-membered M₄L₄ macrometallacycle. Compound 2 crystallizes in the monoclinic space group C2/m with a = 14.400(3) Å, b = 9.3894(18) Å, c = 8.6926(17) Å, β = 123.499(2)°, V = 980.1(3) ų, z = 2. The Cd coordinates to four nitrogen atoms from four different BIM and two nitrates to form a slightly distorted octahedral geometry. The BIM ligands bridge to form a 1-D infinite double-bridged chain structure with 16-membered M₂L₂ macrometallacyclic structural units.     

Metallderivate von Molekülverbindungen. VII. Bis[1,2-bis(dimethylamino)ethan-N,N′]lithium-disilylphosphanid — Synthese und Struktur

Metal Derivatives of Molecular Compounds. VII. Bis[1,2-bis(dimethylamino)ethane-N,N′]lithium Disilylphosphanide — Synthesis and Structure Crystalline lithium phosphanides studied so far show a remarkably high diversity of structure types dependent on the ligands at lithium and the substituents at phosphorus. Bis[1,2-bis(dimethylamino)ethane-N,N′]lithium disilylphosphanide ( 1 ) discussed here, belongs to the up to now small group of compounds which are ionic in the solid state. It is best prepared from silylphosphane by twofold lithiation with lithium dimethylphosphanide first and subsequent monosilylation with silyl trifluoromethanesulfonate, followed by complexation. As found by X-ray structure determination (wR = 0.038) on crystals obtained from diethyl ether {monoclinic; space group P2₁/c; a = 897.8(1); b = 1 673.6(2); c = 1 466.8(1) pm; β = 90.73(1)° at ?100 ± 3°C; Z = 4 formula units}, the lithium cation is tetrahedrally coordinated by four nitrogen atoms of two 1,2-bis(dimethylamino)ethane molecules. Characteristic parameters of the disilylphosphanide anion are a shortened average P? Si bond length of 217 pm (standard value 225 pm) and a Si? P? Si angle of 92.3°.     

Synthese und Kristallstrukturen von monomeren bis(thiophenolato)metall(II)-Komplexen

Preparation and Structures of Monomeric Bis(thiophenolato)metal(II) Complexes Sodium-2,4,6-tris(trifluoromethyl)thiophenolate (NaSR_f) reacts with MCl₂ (M = Zn, Pb) in the molar ratio of 2:1 to form the bis(thiophenolato)metal(II)complexes bis[2,4,6-tris(trifluoromethyl)thiophenolato]zinc 1 and bis[2,4,6-tris(trifluoromethyl)thiophenolato]lead 2 . Reaction of Mn[N(SiMe₃)₂]₂· THF with two equivalents of 2,4,6-tris(trifluoromethyl)thiophenol (R_fSH) forms Mn(SR_f)₂ · THF 3 . All compounds crystallize as THF adducts. The structures of Zn(SR_f)₂ · 2THF 1a , Pb(SR_f)₂ · THF 2a and Mn(SR_f)₂ · 2THF 3a are discussed.     

Synthesis and structural characterization of ruthenium(II) and iron(II) complexes containing 1,2-di-(2-thienyl)-ethene derived ligands as chromophores

A new family of three-legged piano stool structured organometallic compounds containing the η⁵-cyclopentadienylruthenium(II)/iron(II) fragments {M(η⁵-C₅H₅) (DPPE)}⁺, {Ru(η⁵-C₅H₅)(PPh₃)₂}⁺ and {Ru(η⁵-C₅H₅)(TMEDA)}⁺ with coordinated thiophene based chromophores, namely 5-(2-thiophen-2-yl-vinyl)-thiophene-2-carbonitrile (L1) and 5-[2-(5-Nitro-thiophen-2-yl)-vinyl]-thiophene-2-carbonitrile (L2) has been synthesized and fully characterized by ¹H, ¹³C, ³¹P NMR, IR and UV-Vis spectroscopies. Also, electrochemical studies were carried out by cyclic voltammetry and all experimental data are interpreted and compared with related compounds under the scope of NLO properties. Compounds [Ru(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₃S))][CF₃SO₃] (1′Ru) [Fe(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₃S))] [PF₆] (1Fe) and [Ru(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₂S)NO₂)][CF₃SO₃] (4′Ru) were also crystallographically characterized.     

One-step method for synthesis of 2,4-disubstituted quinazoline 3-oxides by reaction of a 2-aminoaryl ketone with a hydroxamic acid using Zn(OTf)2 as the catalyst

A simple and efficient method for the preparation of 2,4-disubstituted quinazoline 3-oxides by reaction of a hydroxamic acid with 2-aminoaryl ketones using zinc(II) triflate as the catalyst is described.     

Bis(3-pyridyl)methylvinylsilane (L1) and 1,2-di(3-quinolyl) dimethyl disilane (L2): Synthesis and complexation reactions. Anion controlled solid state structures of cationic Ag(I)-L1 complex

3-Bromopyridine and 3-bromoquinoline on reaction with n-butyllithium give lithiated products which on reaction with dichloromethylvinylsilane and 1,2-dichlorodimethyldisilane at −78 °C result in the ligands bis(3-pyridyl)methylvinylsilane (L1) and 1,2-di(3-quinolyl)dimethyl disilane (L2). The complexation reactions of both these ligands with Ag(I), Pd(II) and Cu(II) have been explored. The ¹H, ¹³C{¹H} and ²⁹Si{¹H}NMR and IR spectra of both the ligands and their metal complexes have been found characteristic. The complex of L1 with silver(I), [Ag(L1)]ClO₄ (1) gives suitable single crystals characterized by X-ray diffraction. Its structure consists of two dimensional sheets, having 25-membered metallamacrocycle ring, in which Ag has distorted tetrahedral geometry and is bonded to vinyl (η²) group. On reacting AgCF₃SO₃ with L1 and subjecting the single crystals of the resulting complex to X-ray diffraction it has been found that contrary to 1 there is no bond between vinyl group and silver, resulting in infinite molecular strands, in which coordination geometry of silver is distorted trigonal planar. anion acts as a bridge between two molecular strands through F?H (aromatic) and Ag?O secondary interactions. The Ag-C distances in 1 are 2.309(5) and 2.350(12) Å. The CC bond length does not exhibit significant change on bonding with silver in 1.