P2O5/SiO2 AS AN EFFICIENT REAGENT FOR ESTERIFICATION OF PHENOLS IN DRY MEDIA

A simple and efficient method for esterification of carboxylic acid with phenols using P₂O₅/SiO₂ reagent in dry media is reported.     

[IrCl(cod)]2-catalyzed direct oxidative esterification of aldehydes with alcohols

[IrCl(cod)]₂ catalyzed the oxidative esterification of a variety of aldehydes with methanol as a solvent in combination with K₂CO₃ under mild conditions (rt, 12 h). The oxidative esterification reaction of aliphatic aldehydes also took place with olefinic alcohols as reagents in toluene under similar conditions.     

CO2 Mobility and CO2/Brine Interfacial Tension Reduction by Using a New Surfactant for EOR Applications

The synthesis and use in enhanced oil recovery applications of a novel CO₂-philic surfactant derived from maleic anhydride and 2-butyl-1-octanol is reported. The synthesis involved the esterification of maleic anhydride to produce diester followed by sulfonation of the esterified product. The esterification reaction parameters were optimized for the maximum yield of 98.4%. By employing a silica sulfuric acid catalyst, the reaction kinetics of esterification were also investigated. The activation energy was found to be 45.58 kJ/mol. The sulfonation reaction of the esterified product was performed by using sodium bisulfite, and a yield of 82% of surfactant was achieved. The synthesized surfactant lowered the interfacial tension between CO₂/brine to 3.1 mN/m and effectively reduced the CO₂ mobility. This surfactant has a great potential to be used for CO₂ mobility control for CO₂?EOR applications.      

Substituent effects in 13C NMR spectroscopy: Methyl,ethyl, 2-propyl and 2-methyl-2-propyl carboxylates

The ¹³C chemical shifts of the 28 carboxylic esters have been determined by high-resolution NMR spectroscopy with the aid of proton decoupling. A linear relationship is shown to exist between the ¹³C chemical shifts of the carbinyl carbon (C-1) of the esters and the pK_a values of the acids from which they are derived. This is a consequent of the polar character of the

bond. Similarly, if the carboxyl group is kept constant, but the alcoholic part of the ester is varied from primary to secondary and tertiary alcohols, the esterification effect on C-1 can be correlated with the increasing stability of the +δ charge on the carbinyl carbon. The smallest esterification effect at C-1 (1.3 ppm, relative to the parent alcohol) is observed for methyl pivalate (pK_a 5.03 for the parent acid), and the highest effect (17.7 ppm) for 2-methyl-2-propyl trichloroacetate (pK_a 0.70). In contrast, the C-2 esterification effect has been found to be essentially constant (?3.8±0.7 ppm), which is in agreement only with a conformation of the ester group in which the carbinyl carbon is cis with respect to the CO group.     

Darstellung und spektroskopische Charakterisierung von Perfluor(isopropyl)trifluoracetylperoxid (CF3)2C(F)OOC(O)CF3

Preparation and Spectroscopic Characterization of Perfluoro(isopropyl)-trifluoroacetylperoxide (CF₃)₂C(F)OOC(O)CF₃ The reaction of perfluoroacetone (CF₃)₂CO with OF₂ in a ratio 2 : 1 yields Perfluoro(isopropyl)-trifluoroacetylperoxide (CF₃)₂C(F)OOC(O)CF₃. The reaction only occurs under CsF-catalysis. (CF₃)₂C(F)OOC(O)CF₃ is characterized by vibrational, nmr and mass spectra. Using an excess of OF₂ does not give any stable product.     

Novel Surfactant for the Reduction of CO2/Brine Interfacial Tension

The synthesis of novel CO₂ philic surfactant using maleic anhydride and dipropylene tertiary butyl alcohol is reported. The synthesis involved the esterification of maleic anhydride to produce bis(2-(2-(tert-butoxy)propoxy)propyl) maleate and subsequent sulfonation of the esterified product. Para toluene sulfonic acid was employed as catalyst for the esterification reaction. The esterification reaction was optimized for the maximum yield of 98% of bis(2-(2-(tert-butoxy)propoxy)propyl) maleate. The esterification reaction kinetics employing heterogeneous catalyst were also studied. Although this is a bimolecular reaction, a first order reaction kinetics with respect to acid has been observed. The activation energy was found to be 58.71 kJ/mol. The diester was followed by the sulfonation process and a yield of 85% of surfactant was achieved. The synthesized surfactant successfully lowered down the IFT between CO_2/brine to 1.93 mN/m. This surfactant has a great potential to be used for CO₂-EOR applications.     

SO42-/TiO2-SiO2 mixed oxide catalyst, 3. An eco-friendly catalyst for esterification of acetic acid

The effect of addition of titania to silica was examined by various characterization techniques such as FT-IR, BET surface area, surface acid strength/acid sites by the Hammett indicator method and Br?nsted/Lewis acid sites by pyridine adsorbed IR study. Ti-O-Si bond is formed in case of TiO₂-SiO₂ sample, as observed from FT-IR data. Acid strength, surface acid sites, and rate constant for esterification of acetic acid are increased with Ti-O-Si bonding and sulfate impregnation. Both Br?nsted and Lewis acid sites are responsible for catalysing the esterification reaction. This revised version was published online in August 2006 with corrections to the Cover Date.     

Study on preparation of S2O8 2−/Fe2O3-SiO2 solid acid and its catalytic activity

The precursors of Fe₂O₃-SiO₂ mixed oxides prepared through co-precipitation method were modified by microwave hydrothermal treatment for the first time. S₂O₈ ²⁻/Fe₂O₃-SiO₂ solid acids were formed after being impregnated by (NH₄)₂S₂O₈ solution and calcined at high temperature. The samples were characterized by XRD, TEM, N₂ adsorption/desorption methods. It was found that the presence of SiO₂ obviously retarded the formation and growth of Fe₂O₃ crystals. Catalyst with appropriate specific surface area and narrow pore size distribution was obtained. The catalytic activities of the solid acids were evaluated by esterification of acetic acid and butanol and the results were compared with those catalysts prepared at normal conditions. The results showed that catalytic activity was extensively improved by microwave hydrothermal treatment. __________ Translated from Chinese Journal of Applied Chemistry, 2005, 22(8) (in Chinese)     

Difluorodiazoethane (CF2HCHN2): A New Reagent for the Introduction of the Difluoromethyl Group

Difluorodiazoethane (CF₂HCHN₂) is a small reactive diazoalkane. Its synthesis has been pursued since the 1970s, although only in the past three years have considerable advances been made. Today, difluorodiazoethane is a versatile reagent applied in [3+2]-cycloadditions, esterification, and carbene transfer reactions. Difluorodiazoethane possesses markedly altered reactivity compared to the well-studied trifluorodiazoethane (CF₃CHN₂). In this article, we discuss the differences between the two reagents: CF₂HCHN₂ and CF₃CHN₂. We highlight applications of difluorodiazoethane in organic synthesis, discuss bench-stable analogues, and its unexplored areas.     

Synthesis of methyl derivatives of uronic acids. I. Synthesis of methyl (methylα-D-galactopyranosid)uronate and its 2-, 3-, and 4-O-methyl ethers

Alternative unidirectional methods for synthesizing methyl (methyl α-D-galactopyranosid)uronate and its mono-O-methyl ethers by the oxidation (with CrO₃-H₂SO₄-acetone) of the corresponding methyl O-benzyl-O-methyl-α-D-galactopyranosides having unsubstituted 6-OH groups to the corresponding methyl O-benzyl-O-methyl-α-D-galactouronic acids followed by esterification with CH₂N₂ and the catalytic hydrogenolysis of the benzyl groups are proposed.     

Novel One-Pot Synthesis of Functionalized (Z)-2-Arylvinyl Bromides

A novel and versatile one-pot synthesis of functionalized (Z)-2-arylvinyl bromides was developed. The new procedure involved microwave-induced debrominative decarboxylation of cinnamic acid dibromide with Et₃N and subsequent esterification in the presence of dicyclohexyl carbodiimide (DCC) and dimethyl-aminopyridine (DMAP).     

A novel 1-tert-butoxy-2-tert-butoxycarbonyl-1,2-dihydroisoquinoline (BBDI)-catalyzed esterification of N-protected amino acids with nearly equimolar amounts of alcohols in the presence of Boc2O

A very mild, BBDI-catalyzed esterification using approximately equimolar amounts of N-protected amino acids and alcohols, in junction with Boc₂O is described.     

Gas chromatographic analysis of aromatic carboxylic acids in the presence of C1−C22 fatty acids and C2−C16 dicarboxylic acids esterified in aqueous solutions as the n-propyl esters

Summary The direct esterification and gas chromatographic analysis of aromatic carboxylic acids as n-propyl esters is described.Derivatization is performed in aqueous solution with n-propanol in the presence of sulfuric acid. The n-propyl esters of benzoic, phthalic, trimellitic and pyromellitic acids permit their gas chromatographic separation from each other and from fatty acids and aliphatic dicarboxylic acids. At mode ratios of [H₂O]/[n-PrOH]0.03 the water present does not interfere with the esterification reaction. At mole ratios above 0.03 anhydrous sodium sulfate is used for binding the water, at mole ratios of [Na₂SO₄anh.]/[H₂O]=0.51–1.52 and of [H₂SO₄]/[Na₂SO₄anh.]=0.43–1.28, respectively.     

Recyclable CuMgAl hydrotalcite for oxidative esterification of aldehydes with alkylbenzenes

A series of hydrotalcite-like compounds with various Cu:Mg:Al molar ratios were prepared by the co-precipitation method. The catalytic performance for oxidative esterification of aldehydes was investigated. X-ray diffraction, N₂ adsorption–desorption (BET), hydrogen temperature-programmed reduction (H₂-TPR), X-ray photoelectron spectroscopy, the scanning electron microscope (SEM), the transmission electron microscope and atomic absorption spectrometry were used to characterize the catalysts. The results showed that the benzyl benzoate product was obtained in good to excellent yield using tert-butyl peroxybenzoate as oxidant at 90°C under air atmosphere over Cu₂Mg₁Al₁-LDH catalyst. The catalyst can be recovered and used with 45% conversion after recycling five times. The oxidative esterification reaction in the heterogeneous system is environmentally friendly.

The Cu₂Mg₁Al₁-LDH catalyst prepared by co-precipitation method showed high catalytic activity for oxidative esterification of aldehydes. 81.0% yield of benzyl benzoate with benzaldehyde and toluene as reactants was obtained using tert-butyl peroxybenzoate as oxidant at 90°C under air atmosphere over Cu₂Mg₁Al₁-LDH catalyst. The catalyst can be recovered and used with 45% conversion after recycling five runs. The oxidative esterification reaction in the heterogeneous system is environmentally friendly.     

Papain catalyzed estehification of alanine by alcohols and diols

Papain catalyzed esterification of Boc-Ala-OH with various alcohols and diols under biphasic conditions was investigated. Long-chain diols HO(CH₂)nOH gave good yields of esterification up to n=10 whereas the homologous alcohols C_nH_2n+1OH condensed well only for n = 2, 4, 6. Esterification with functionnalized primary alcohols is also described.     

Gas chromatographic analysis of aromatic,carboxylic acids in the presence of C1−C5 fatty acids and C2−C7 dicarboxylic acids esterified in aqueous solutions as the n-butyl esters

Summary The direct esterification and gas chromatographic analysis of aromatic carboxylic acids as n-butyl esters is described.Derivatization is performed in aqueous solution with n-butanol in the presence of sulfuric acid. The butyl esters of benzoic, phthalic, hemimellitic, trimellitic, trimesic and pyromellitic acids permit their gas chromatographic separation from each other and from fatty acids and alipatic dicarboxylic acids. At mole ratios of [H₂O]/ [n-BuOH]0.04 the water present does not interfere with the esterification reaction. At mole ratios above 0.04 anhydrous sodium sulfate is used for binding the water, at mole ratios of [Na₂SO₄ anh.]/[H₂O]=0.25–0.75.     

铜铁二元类水滑石化合物的制备及催化性质研究

利用共沉淀法合成了CuFe二元类水滑石化合物。测定了不同Cu/Fe比混合盐溶液随沉淀剂NaOH与Na₂CO₃加入,混合盐体系pH值变化情况,详细探讨了不同因素对类水滑石化合物制备的影响,得到了合成铜铁二元类水滑石化合物的适宜条件,制备出晶相单一、结晶度高的类水滑石化合物,并利用XRD、FTIR、TG-DTA对合成物进行表征。将合成的催化剂引入苯甲醛与正丙醇反应生成安息香异丙醚反应中, 苯甲醛转化率为58%,安息香异丙醚选择性接近于100%。     

Biodiesel production via esterification of oleic acid catalyzed by MnO2@Mn(btc) as a novel and heterogeneous catalyst

The main objective of this study is to develop efficient and environmentally benign heterogeneous catalysts for biodiesel production. For this purpose, a heterogeneous MnO₂@Mn(btc) catalyst was prepared by the solvothermal method, and the prepared catalyst was tested for the esterification of oleic acid. Various techniques such as X‐ray diffraction, scanning and transmission electron microscopy, Brunauer–Emmett–Teller (BET) method, infrared spectroscopy, thermogravimetry, and NH₃‐TPD (temperature programmed desorption) analysis were employed for the characterization of the solid catalyst. The solid catalyst with MnO₂@Mn(btc) loading of 15% showed high catalytic activity and long durability in the esterification of oleic acid, in which the fatty acid methyl ester yield reached 98% consecutively for at least five cycles under mild conditions.     

Preparation of Nanostructural ZrO2/SiO2 and Study on Catalytic Activity of its Superacid Catalyst

A novel material ZrO₂/SiO₂ was synthesized on SiO₂ support by means of electrostatic self‐assembly technique and sol‐gel method. After treating this material with 0.7 mol·L^?1 H₂SO₄, a nanostructural solid superacid catalyst SO₄^2?‐ZrO₂/SiO₂ was prepared. The material was characterized by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Brunauer Emmett Teller method (BET) and Hammett indicator method. The catalytic activity of the catalyst was carried out for the esterification between acetic acid and butanol. Results show that the catalytic activity of this catalyst was much higher than that of powdered superacid catalyst SO₄^2?/ZrO₂. Due to the SiO₂ spherical support, the solid superacid catalyst could be separated and recovered easily. The nanostructural ZrO₂/SiO₂ will be a promising material for the chemical industry in the future.     

New Way for the Preparation of 4-Phenyl-2-oxobutyric Acid Ethyl Ester

New way for the preparation of 4-phenyl-2-oxobutyric acid ethyl ester 1 has been elaborated. The four-steps synthesis from ethyl pyruvate involves the consecutive condensation of ethyl pyruvate with benzaldehyde, hydrogenation of benzylidenepyruvic acid sodium salt 2a to 4-phenyl-2-hydroxybutyric acid 3 on Ni catalysts, esterification of 3 and oxidation of the ester to 1 with CrO₃.