Glass Transition Temperature Improvement for Polychloroprene by One-Step ATRP Reaction

Polymethyl methacrylate (PMMA) polymer chains were grafted on neoprene W (NW) by a one-step ATRP reaction. The thermal properties of the products were analyzed by DSC. Improvement of T _g was a result of the PMMA grafted chains. Also, the melting point (T _m ) changed from 42°C for NW to 142°C for modified NW. Using different solvents for the resulting copolymers, aggregates were obtained. Phase separation was influenced by the grafting degree of PMMA and the employed solvent. The copolymers were analyzed by GPC, FT-IR, DSC, and SEM.     

Water-Soluble Copolymers. II. Synthesis and Characterization of Model Dextran-g-Acrylamides by Ce(lV)/HNO3-lnduced Initiation

In order to develop polymers useful as mobility control agents in enhanced oil recovery processes, water-soluble acrylamide grafted polysaccharide copolymers have been synthesized in water at 25° C using a ceric ammonium nitrate/nitric acid system. The effects of varying concentrations of ceric ion, monomer, and substrate on conversion, graft length, and molecular structure of the reaction products have been examined. The crude reaction products were purified by fractional precipitation and then were analyzed for nitrogen content using a micro-Kjeldahl method. The chemical structures of the graft copolymers were studied by selective hydrolysis of the carbohydrate backbones. Intrinsic viscosity and grafting length data were used to predict solution behavior of the graft copolymers prepared under controlled conditions. Aqueous size exclusion and viscosity studies showed direct correlations between hydrodynamic volume and length of the polyacrylamide side-chain grafts.     

Effects of solvent in photo-induced graft copolymerization of vinyl monomers on cellulose

The effects of swelling of the sample and polymerization solvents were studied for photo-induced graft copolymerization of vinyl monomers on cellulose. The graft copolymerization of methyl methacrylate (MMA) was activated by swelling of the sample or organic solvent-water solutions within a certain range of their concentrations. Though each organic solvent gave a maximum in per cent grafting and the number of grafts at about 25 vol-% concentration, the initiation reaction scarcely took place at 100% concentration; thus, the solvent itself is considered to have a negative effect. The solvents used in the experiments were all hydrophilic, such as methanol, acetone, and dioxane. The average molecular weight of the grafted PMMA differed in each solvent, indicating a different characteristic effect of solvent on the growing grafted polymer radicals. The presence of ferric ion as a sensitizer stimulated further the contributions of the sample swelling and the organic solvents to the copolymerization reaction. A similar effect was observed for styrene as for MMA, but not for acrylic acid and methacrylic acid.     

Properties of poly(vinyl alcohol)-graft-polyacrylamide copolymers depending on the graft length. 2. Thermal properties in the bulk state

Thermal behavior of poly(vinyl alcohol)-graft-polyacrylamide copolymers (PVA-g-PAA), so-called intramolecular polymer-polymer complexes (intraPC), with variable M̄ _vPAA and constant average number N of grafts is considered in this report. Complete compatibility of PVA and PAA through hydrogen bonding is realized in the range of the graft lengths not exceeding some critical value. The content of adsorbed and trapped water in graft copolymers reflects some features of PVA-g-PAA_N structure depending on the graft lengths. The first thermal decomposition region in air for copolymers begins at higher temperatures with growing M̄ _vPAA, but the total destruction interval reduces. Formal kinetic decomposition parameters of the first decomposition stage appear to be the largest for the PVA-g-PAA with the largest quantity of H-bonds between the main and graft chains. Chemical transformations in graft copolymers, PVA and PAA during thermal decomposition are discussed.     

Grafting of Tetrafluoroethylene onto Polyethylene by Pre-irradiation Technique

Grafting of tetrafluoroethylene onto polyethylene was carried out by a pre-irradiation technique. It was found that grafting proceeds very rapidly at -35°C in the liquid phase of tetrafluoroethylene. Takathene, which was prepared by a radiation process at Takasaki Radiation Chemistry Research Establishment, was found to be most suitable for grafting compared to other polyethylenes. The specific surface is extremely high in the Takathene, and this may be the most important reason for the high grafting speed. On the other hand, IR measurements of the grafted copolymers showed a characteristic absorption band at 1110 cm-1 which may be attributed to the structure of the grafting (branching) position. It was also found that grafted polytetrafluoroethylene can be crystallized during grafting. This is the first case of grafted polymers being in a crystalline state.     

Anomalous behaviour of comb-like dextran-polyacrylamide copolymers in mixed solvents

Copolymers obtained by grafting polyacrylamide (PAA) onto dextran (DEX) have been synthesised by ceric-ion-reduced redox initiation method. These copolymers have been characterized by light scattering and self-exclusion chromatography. Viscometry measurements in mixed solvents, water/dimethyl formamide (DMF) have revealed an anomalous behaviour reminiscent of a polyelectrolyte behaviour, namely a strong upturn when decreasing polymer concentration, effect which is absent in pure water. The origin of this phenomenon has been studied by determining by means of SAXS the short-range molecular structure of these copolymers in the binary solvents. Comparison has been also performed with water/methyl formamide (MF) and water/formamide (FA) binary solvents where the pseudo-polyelectrolyte effect is absent. A molecular model is discussed on the basis of the results from SAXS that throws some light on the viscometry effect. This model considers the occurrence of an interdigitation process between the PAA grafts together with the formation of a PAA-DMF complex.     

UV grafting of methacrylic acid and acrylic acid on high‐density polyethylene in different solvents and the wettability of grafted high‐density polyethylene. II. Wettability

The wettability of high‐density polyethylene grafted with methacrylic acid is strongly influenced by the nature of the grafting solvent. Here, the wettability is expressed by the water contact angle and absorbency. The initial (10‐s) contact angle of polyethylene (PE) grafted in acetone/water solution decreased rapidly with the extent of grafting at low grafting levels and then remained independent of the grafting level at about 50°. When a water droplet was left on the surface for a longer time, its contact angle decreased to a very low value in the period of about 10 min. For the PE samples grafted in dichloromethane, petroleum ether, cyclohexane, and chloroform, there was only a small decrease (10°) in the contact angle of water from that observed on pure PE, even when the extent of grafting was very large. The PE films grafted in these organic solvents also took a much longer time than PE films grafted in acetone/ water solution to obtain equilibrium water absorbency. The water absorbency of PE films grafted in 30% acetone/water solution was about twice that of PE films grafted in the other solvents at the same extent of grafting. These results suggested that for the solvents other than acetone/water, the grafted layer is partially buried below the surface of PE. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 263–270, 2004     

Effective grafting of polymers onto ultrafine silica surface: Photopolymerization of vinyl monomers initiated by the system consisting of trichloroacetyl groups on the surface and Mn2(CO)10

The effective grafting of vinyl polymers onto an ultrafine silica surface was successfully achieved by the photopolymerization of vinyl monomers initiated by the system consisting of trichloroacetyl groups on the surface with Mn₂(CO)₁₀ under UV irradiation at 25 °C. The introduction of trichloroacetyl groups onto the surface of silica was achieved by the reaction of trichloroacetyl isocyanate with surface amino groups, which were introduced by the treatment of silica with 3‐aminopropyltriethoxysilane. During the polymerization, the corresponding polymers were effectively grafted onto the surface, based on the propagation of polymer from surface radicals formed by the interaction of trichloroacetyl groups and Mn₂(CO)₁₀. The percentage of poly(methyl methacrylate) grafting onto the silica reached 714.6% after 90 min. The grafting efficiency (proportion of grafted polymer to total polymer formed) in the polymerization of methyl methacrylate was very high, about 80%, indicating the depression of formation of ungrafted polymer. Polymer‐grafted silica gave a stable colloidal dispersion in good solvents for grafted polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2157–2163, 2001     

Reorganization of hydrogen-bonded block copolymer complexes

Poly(styrene)-block-poly(4-vinylpyridine) (PS-b-P4VP) copolymers and poly(acrylic acid) (PAA) have been mixed in organic solvents. Complexation via hydrogen bonding occurs between the P4VP and PAA blocks. Those insoluble complexes aggregate to form the core of micelles surrounded by a corona of PS chains. Reorganization of these structures occurs upon addition of acidic or basic water, which results in the breaking of the hydrogen bonds between the P4VP and PAA blocks. After transfer of the initial complexes in acidic water, micelles consisting of a PS core and a protonated P4VP corona are observed. In basic water, well-defined nanoparticles formed by the PS-b-P4VP copolymers are obtained. It is demonstrated that these nanoparticles are stabilized by the negatively charged PAA chains. Finally, thermally induced disintegration of the micelles is investigated in organic solvents.     

Chitosan-graft-poly(ϵ-caprolactone)s: An optimized chemical approach leading to a controllable structure and enhanced properties

A novel synthetic approach was developed for the controllable modification of chitosan (CS) with poly(ϵ-caprolactone) (PCL). 6-O-Triphenylmethyl-chitosan (TMCS) was synthesized as a highly soluble intermediate in organic solvents to facilitate an efficient grafting reaction of PCL onto CS in a homogeneous reaction medium. Subsequently, the syntheses of CS-g-PCL copolymers with different degrees of substitution (ds) and various chain lengths of PCL (number-average molecular weight = 1200–11,000) were carried out by a coupling reaction between the carboxylic terminal groups of PCL chains and the amino groups of TMCS. The successful grafting reaction was confirmed by GPC measurements, which indicated that the products were graft copolymers rather than physical blends. The ds, defined as the number of PCL chains per saccharide unit, of the graft copolymers could be adjusted simply by changes in the molar feed ratios of PCL to CS, and graft copolymers with different ds values ranging from 0.28 to 0.49 were synthesized, as calculated by ¹H NMR and elemental analysis. DSC and X-ray measurements showed that the melting temperature and enthalpy of the PCL grafts of these graft copolymers could be adjusted by the ds and the chains length of PCL, respectively. Meanwhile, the CS-g-PCL copolymers exhibited better solubility in various solvents, such as in chloroform for some of the resultant graft copolymers, than the original CS. Finally, nanoparticles of 100–200 nm, having hydrophobic PCL domains and cationic hydrophilic surfaces, were obtained through the self-assembly of the copolymers in selective solvents. These types of graft copolymers have great potential in various applications, such as targeted drug and gene delivery as well as tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2556–2568, 2007     

Polymers from renewable resources. II. A study in the radio chemical grafting of poly(styrene‐alt‐maleic anhydride) onto cellulose extracted from pine needles

A binary mixture of styrene and maleic anhydride has been graft copolymerized onto cellulose extracted from Pinus roxburghii needles. The reaction was initiated with gamma rays in air by the simultaneous irradiation method. Graft copolymerization was studied under optimum conditions of total dose of radiation, amount of water, and molar concentration previously worked out for grafting styrene onto cellulose. Percentage of total conversion (Pg), grafting efficiency (%), percentage of grafting (Pg), and rates of polymerization (R_p), grafting (R_g), and homopolymerization (R_h) have been determined as a function of maleic anhydride concentration. The high degree of kinetic regularity and the linear dependence of the rate of polymerization on maleic anhydride concentration, along with the low and nearly constant rate of homopolymerization suggest that the monomers first form a complexomer which then polymerizes to form grafted chains with an alternating sequence. Grafting parameters and reaction rates achieve maximum values when the molar ratio of styrene to maleic anhydride is 1 : 1. Further evidence for the alternating monomer sequence is obtained from quantitatively evaluating the composition of the grafted chains from the FT‐IR spectra, in which the ratio of anhydride absorbance to aromatic (CC) absorbance for the stretching bands assigned to the grafted monomers remained constant and independent of the feed ratio of maleic anhydride to styrene. Thermal behaviour of the graft copolymers revealed that all graft copolymers exhibit single stage decomposition with characteristic transitions at 161–165°C and 290–300°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1763–1769, 1999     

二元单体在棉纤维上的γ辐射接枝

在氮气气氛下用γ射线辐照的方法在棉纤维上接枝苯乙烯/马来酸酐、苯乙烯/甲基丙烯酸二甲胺乙酯、苯乙烯/醋酸乙烯酯二元单体. 研究了溶液中单体的浓度和二元单体的摩尔比等条件对接枝率的影响, 并探讨了两种单体的竞聚率对接枝率、接枝膜的组成及性能的影响. 结果表明决定二元接枝生成物结构比例的是二元单体的比例及其竞聚率. 接枝产物的红外、热重分析进一步佐证了竞聚率对不同二元单体体系接枝生成物结构的影响. X射线衍射结果表明棉纤维素上接枝不同的二元单体后均引起结晶度的下降, 而且结晶度随接枝率的增加而降低, 证明二元接枝反应是从纤维素无定型区通过第三相向结晶区逐步扩展的.     

Modification of chitosan via grafting of glycolic acid followed by polycondensation during heat treatment

The modification of chitosan via grafting of glycolic acid and subsequent polycondensation during heat treatment have been studied. The formation of copolymers, the degree of amidization of amino groups, and the length of side polyglycolide chains are investigated by IR spectroscopy and gravimetry. The structural features and surface behavior of the films based on chitosan modified by poly(glycolic acid) are examined by X-ray diffraction and AFM. The grafting of side polyglycolide chains leads to marked changes in the chitosan structure. The study of the sorption behavior of the films based on the modified chitosan confirms the hydrophobization of chitosan via grafting of poly(glycolic acid).     

Design of Well‐Defined Monofunctionalized Poly(3‐hexylthiophene)s: Toward the Synthesis of Semiconducting Graft Copolymers

The post‐functionalization of poly(3‐hexylthiophene) (P3HT) via various synthetic routes is reported. Well‐defined and monofunctionalized ω‐thiol‐terminated P3HT, ω‐carboxylic acid‐terminated P3HT, ω‐acrylate‐terminated P3HT, and ω‐methacrylate‐terminated P3HT are obtained in high yields through a straightforward procedure. From those, different novel P3HT‐based graft copolymers are synthesized following two routes: “grafting onto” and “grafting through” (macromonomer polymerization) methods. The synthesis of three types of graft copolymers is described. Each one has “rod” P3HT‐grafted side chains on a “coil” main chain, which can be polyisoprene, poly(vinyl alcohol), or poly(butyl acrylate). Each copolymer is characterized by size‐exclusion chromatography and NMR.     

Cellulose Functionalization via ATRP Grafting of Glycidyl Methacrylate for Cr（VI） Adsorption

Cellulose was first grafted with glycidyl methacrylate （GMA） in an ionic liquid via atom transfer radical polymerization （ATRP） and then the introduced epoxy groups were reacted with ethanediamine （EDA） to obtain an amino adsorbent. The grafting copolymer and the obtained adsorbent were characterized by FTIR, aH NMR, TEM and SEM. The results showed that the grafted copolymers had grafted polymer chains with well-controlled molecu- lar weight and polydispersity, the polymerization was a controlled system. The cellulose adsorbent had numerous micropores on the surface and showed high performance for Cr（VI） adsorption. The adsorption behavior was pH dependent and the sorption equilibrium was achieved within 2 h on the adsorbent.     

Physical properties of some low polymer content radiation-grafted wool copolymers

Wool copolymers with low polymer content (6–18%) have been prepared by radiation grafting techniques. Supercontraction, density, and formic acid vapor sorption measurements have been used to assess changes in the keratin structure produced by the grafting processes. Kinetic studies of the contractile forces developed in the first (reversible) stage of the supercontraction of wool in lithium bromide showed that grafting with poly(N-methylol acrylamide) or polyacrylonitrile has a “repairing” action which offsets changes in the wool structure produced by the small radiation dose (2 Mrad) used for the grafting process. By contrast, grafting with poly(vinyl acetate) had no repairing effect. The bonds formed by grafting of poly(N-methylol acrylamide) or polyacrylonitrile to keratin do not reduce swelling of the wool by formic acid, which is a measure of effective crosslink density. Grafting with poly(vinyl acetate) led to increased swelling by formic acid, indicating some disruption of the keratin structure during polymerization. It is suggested that the role of the grafted polymer is mainly to stabilize the hydrogen-bonded secondary network by interaction between the polypeptide and polymer chains.     

Grafting of Polymers Having Pendant Peroxycarbonate Groups Onto Carbon Black and Postpolymerization of Vinyl Monomers

Abstract

Postpolymerization of vinyl monomers initiated by pendant peroxycarbonate groups of grafted polymer chains on carbon black (CB) was investigated. The grafting of polymers having pendant peroxycarbonate groups onto CB was achieved by the trapping of polymer radicals formed by the thermal decomposition of copolymers of t-butylperoxy-2-methacryloyloxyethyl-carbonate (HEPO) with vinyl monomers such as vinyl acetate (VAc), styrene (St) and methyl methacrylate (MMA). The copolymers having pendant peroxycarbonate groups were prepared by copolym-erization of HEPO with vinyl monomers using azo initiator under irradiation of UV light at room temperature. The amount of remaining pendant peroxycarbonate groups of the poly(VAc-co-HEPO)-grafted CB obtained from the reaction at 90°C was maximum and decreased above the temperature. Furthermore, the postpolymerization of vinyl monomers, such as St, MMA, and VAc was initiated in the presence of poly(VAc-co-HEPO)-grafted and poly(St-co-HEPO)-grafted CB and the corresponding polymers were postgrafted onto CB to give branched polymer-grafted CB. The percentage of poly(St)-postgrafting (proportion of post-grafted poly(St) to poly(MMA-co-HEPO)-grafted CB used) increased with increasing polymerization time, but became constant at 20% after 4 hours.     

Synthesis and investigation of properties of repeatedly grafted copolymers (pemosors)

Repeatedly grafted copolymers (pemosors) were obtained by grafting one and the same or different vinyl monomers onto heterochain polymers in a radical reaction. As starting polymers films of polyethylene terephthalate and poly-ε-caproamide were used. Styrene and methyl methacrylate were the grafted vinyl monomers. It has been shown that pemosors could be formed in yields of 500–1000% (of the starting sample weight) by multiple grafting on vinyl polymer. Pemosors differ in appearance both from the starting polymers and the single-graft copolymers. Investigations of pemosor samples by electron microscope showed that the morphological structure of the surface was appreciably affected, the changes being more significant with increasing content of the grafted polymer. X-Ray studies and NMR data on pemosors showed that multiple grafting of vinyl monomers does not change the crystal structure of the starting polymers, affecting only the supermolecular structure of the outer layer. Pemosors are polymers of a new type, differing in their properties from the starting polymers and the single-graft copolymers. The grafting character and penetration depth of the grafted monomer depend on the packing compactness of the supermolecular structure of the polymeric base as well as on the chemical nature of the starting polymers and monomers. Pemosors possess considerable chemical resistance and withstand prolonged boiling in 40% alkali solution.     

“Living” free radical graft copolymers I: Preparation and properties

Polymers substituted with thio groups are useful for the photochemical synthesis of graft copolymers. Such copolymers have been prepared by the initial conversion of backbone polymers containing chlorinated substituents into polymers containing diethyldithiocarbamate (TC), isopropyl xanthate (IX) or mercaptobenzothiazole (BT) functionality. The photochemical reaction of monomers with these products produced graft copolymers. A variety of halogenated polymers were investigated as starting materials for these syntheses, including poly(vinyl chloride), chlorinated polyvinyl chloride), chlorinated polyethylene, chlorobutyl rubber and neoprene. Characteristics of the grafting reactions, including “pseudo-living” behavior and tandem grafting aspects, were investigated. Glass transitions of the grafted polymers were found to vary uniformly with composition for most of the grafted products.     

Separation and determination of emetine dithiocarbamate metal complexes by capillary electrophoresis with chemiluminescence detection of the tris(2,2'-bipyridine)-ruthenium(II) complex

A new cellulose-based anion-exchanger was prepared by grafting polyallylamine onto cellulose. The material was obtained by partial oxidation of a size-exclusion grade cellulose gel by aq. NaIO4, forming dialdehyde cellulose, followed by Schiff base formation with a polyallylamine (PAA, molecular mass 5000) and subsequent reduction for stabilization. Three grades of PAA-cellulose gels, with amino group contents of 0.78, 1.01 and 1.28 mmol/g cellulose, were examined for their ionic interaction with mono- and divalent carboxylic acids at pH 2.5-5.5. While the retention factor for monovalent acids was nearly proportional to the amino group content of the gel, that for divalent acids was remarkably greater for the PAA-cellulose gel than for the conventional diethylaminoethyl (DEAE) cellulose gel bearing more amino groups (1.97 mmol/g cellulose). Such high capacity can be explained by the high local density of amino groups on grafted PAA, in contrast to the random and sparse charge distribution in conventional exchangers.