Branching of anionic poly(methyl methacrylate)

A viscometric determination of the degree of branching γ, of poly(methyl methacrylate) obtained by anionic polymerization proved the reaction of the growing center of poly(methyl methacrylate) with the ester group of another polymer molecule, accompanied by the formation of a trifunctional branch point. This reaction occurs if the solution polymerization of methyl methacrylate is initiated: (1) with butyllithium at ?78°C only on attaining 100% conversion and after a long time or at +20°C immediately after the polymerization has set in; (2) with lithium tert-butoxide at +20°C after a long time. The degree of branching of poly(methyl methacrylates) obtained under similar conditions in the presence of tetrahydrofuran reaches higher values than for polymers prepared in toluene. The tacticity of polymers does not affect the experimentally determined γ values.     

C2‐Symmetric Zirconocenes in the Polymerization of Conjugated Diolefins

C₂‐symmetric zirconocenes activated by methylaluminoxane were utilized as catalysts in the polymerization of 1,3‐diolefins. The results indicate that the most crowded catalytic precursor rac[CH₂(3‐tert‐butyl‐1‐indenyl)₂]ZrCl₂ ( 1 ) is also the most active one, giving 1,4‐polymerization of 1,3‐butadiene and (Z)‐1,3‐pentadiene and 1,2‐polymerization of (E)‐1,3‐pentadiene and 4‐methyl‐1,3‐pentadiene. Probably, the different behavior of 1 with respect to other C₂‐symmetric zirconocenes utilized is due to the different stability of the bond between the last inserted monomer unit and the metal, as well as to the coordination of incoming monomer.     

New initiator system for the anionic polymerization of (meth)acrylates in toluene. IV. Random copolymerization of (meth)acrylates in toluene initiated by s-BuLi ligated by lithium silanolates

Copolymerization of binary mixtures of alkyl (meth)acrylates has been initiated in toluene by a mixed complex of lithium silanolate  (s-BuMe₂SiOLi) and s-BuLi (molar ratio > 21) formed in situ by reaction of s-BuLi with hexamethylcyclotrisiloxane (D₃). Fully acrylate and methacrylate copolymers, i.e., poly(methyl acrylate-co-n-butyl acrylate), poly(methyl methacrylate-co-ethyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate) of a rather narrow molecular weight distribution have been synthesized. However, copolymerization of alkyl acrylate and methyl methacrylate pairs has completely failed, leading to the selective formation of homopoly(acrylate). As result of the isotactic stereoregulation of the alkyl methacrylate polymerization by the s-BuLi/s-BuMe₂SiOLi initiator, highly isotactic random and block copolymers of (alkyl) methacrylates have been prepared and their thermal behavior analyzed. The structure of isotactic poly(ethyl methacrylate-co-methyl methacrylate) copolymers has been analyzed in more detail by Nuclear Magnetic Resonance (NMR). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2525–2535, 1999     

Mechanism of anionic polymerization of (meth)acrylates in the presence of aluminium alkyls, 2. Kinetic investigations with methyl methacrylate in toluene

The kinetics of the polymerization of methyl methacrylate initiated by lithium alkyls (tert-butyllithium or ethyl α-lithiobutyrate) was investigated in the presence of aluminium alkyls (triethylaluminium or triisobutylaluminium) in toluene at −78°C. The rate of polymerization decreases considerably once the living dimer is formed. This suggests that the aluminate end-group coordinates with the penultimate ester group of the polymer chain, thus decreasing reactivity. The results are at variance with an activated monomer mechanism.     

Polymerization of mono‐, Di‐, and trichloroethyl methacrylates: A study in chain transfer

Bulk free radical polymerization of the monomer series CH₂ = C(CH₃)C(O)OCH₂CH_3‐n Cl_n , n = 1, 2, 3, yields an unexpectedly crosslinked product with a crosslink density that increases with decreasing chlorine content of the respective monomer (n = 3 < n = 2 < n = 1). This chlorine substituent effect is investigated by correlation with chain transfer constant measurements for four homologous series of chloroalkyl compounds (chloroethyl acetates (CH₃C(O)OCH₂CH_3‐n Cl_n , n = 1,2,3); chloromethanes (CH_4‐n Cl_n , n = 2,3,4) and CD₂Cl₂ and CDCl₃ analogs; butyl chloride isomers (n‐ , iso‐ , sec‐, tert‐) and tert‐C₄D₉Cl analog; and nine chloroethanes (C₂H_{n ?6}Cl_n , n = 1–6)) in a methyl methacrylate polymerization. The pattern conveyed by the magnitude of chain transfer constants and deuterium isotope effects is consistent with a vicinal chlorine effect (i.e., chlorine activation of a vicinal hydrogen for abstraction) to account for the relative activities of the four series of model compounds and for the propensity of the chloroethyl methacrylates to crosslink in a bulk free radical polymerization. The chloroalkyl moiety's contribution to chain transfer is relatively modest (≤10^?4), but, when incorporated as a monomer pendant group in free radical polymerizations, it is effective in broadening molecular weight to the extent of resulting in a crosslinked polymer. Published 2016.^? J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 93–106     

Effects of mercaptides on the butyllithium-initiated polymerization of methyl methacrylate

The effect of mercaptides on the butyllithium-initiated polymerization of methyl methacrylate in toluene were investigated. The rates of polymerization were decreased by the addition of mercaptides, possibly owing to the formation of a relatively stabilized complex between the mercaptides and the active center of the polymerizing monomer. The stereoregularity was also affected by the addition of mercaptides. The effects increased in the order of increase in the bulk of the alkyl group of the mercaptides: n-propyl < isopropyl < tert-butyl < phenyl. The effects of mercaptides on the stereoregularity were larger than those of the analogous oxygen compounds. The concentrations of butyllithium and monomer had no effect on the stereoregularity.     

Highly heterotactic polymerization of methacrylates — Higher order stereoregulation and stereochemical significance

A combination of tert-butyllithium (t-BuLi) and bis(2,6-di-t-butylphenoxy)methylaluminium (MeAI(ODBP)₂) was found to be an efficient initiator for heterotactic living polymerization of certain alkyl methacrylates in toluene at low temperatures. The polymerization of methyl methacrylate (MMA) with t-BuLi/MeAI(ODBP)₂ (AI/Li=5 mol/mol) in toluene at −78°C gave heterotactic-rich poly(methyl methacrylate) (PMMA) with narrow molecular weight distributions (MWDs) (heterotactic triad fraction mr = 68%, ratio of weight- to number-average molecular weights M̄w/M̄n = 1.06-1.17). Other alkyl methacrylates also gave heterotactic polymers under the same conditions; in particular, ethyl and butyl methacrylates gave polymers with heterotactic triad fractions of 87%. The highest triad heterotacticity of 91.6% was obtained for the polymerization of ethyl methacrylate at −95°C. Some characteristic features of this stereospecific polymerization were discussed based on the polymerization results combined with other structural information of the polymer such as chain-end stereostructure and stereosequence distribution in the main chain.     

ε‐Caprolactone polymerization under air by the biocatalyst: Magnesium 2,6‐di‐tert‐butyl‐4‐methylphenoxide

This study investigated the synthesis of the biocatalyst, magnesium 2,6‐di‐tert‐butyl‐4‐methylphenoxide (Mg(BHT)₂) complex, and the ring‐opening polymerization (ROP) of ε‐caprolactone (CL). The complex demonstrates high catalytic activity and controllable of molecular weight for the ROP of CL in tetrahydrofuran at room temperature, even when polymerization was performed under air. Before this study, the polymerization of CL had never been performed using a magnesium catalyst under air at room temperature. Various forms of alcohols with different purposes were also used as initiators with Mg(BHT)₂. The results show that the magnesium complex acts as a perfect catalyst because of its high catalytic activity and control ability without any cytotoxicity in the polymerization of CL, making it suitable for biomedical applications. In addition, nanoparticle formation, cytotoxicity, and phototoxicity of tri‐2‐hydroxyethyl ester [Ce6‐(CH₂CH₂OPCL)₃] were also studied in this article and Ce6‐(CH₂CH₂OPCL)₃ formed nanoparticle can act as a nanophotosensitizer for photodynamic therapy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Copolymers of methyl methacrylate and fluoroalkyl methacrylates: Effects of fluoroalkyl groups on the thermal and optical properties of the copolymers

Fluoroalkyl methacrylates, 2,2,2‐trifluoroethyl methacrylate ( 1 ), hexafluoroisopropyl methacrylate ( 2 ), 1,1,1,3,3,3‐hexafluoro‐2‐methyl‐2‐propyl methacrylate ( 3 ), and perfluoro t‐butyl methacrylate ( 4 ) were synthesized. Homopolymers and copolymers of these fluoroalkyl methacrylates with methyl methacrylate (MMA) were prepared and characterized. With the exception of the copolymers of MMA and 2,2,2‐trifluoroethyl methacrylate ( 1 ), the glass transition temperatures (T_gs) of the copolymers were found to deviate positively from the Gordon‐Taylor equation. The positive deviation from the Gordon‐Taylor equation could be accounted for by the dipole–dipole intrachain interaction between the methyl ester group and the fluoroalkyl ester group of the monomer units. These T_g values of the copolymers were found to fit with the Schneider equation. The fitting parameters in the Schneider equation were calculated, and R² values, the coefficients of determination, were almost 1.0. The refractive indices of the copolymers, measured at 532, 633, and 839 nm wavelengths, were lower than that of PMMA and showed a linear relationship with monomer composition in the copolymers. 2 and MMA have a tendency to polymerize in an alternating uniform monomer composition, resulting in less light scattering. This result suggests that the copolymer prepared with an equal molar ratio of 2 and MMA may have useful properties with applications in optical devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4748–4755, 2008     

Radical polymerization of alkyl crotonates as 1,2-disubstituted ethylenes leading to thermally stable substituted polymethylene

Radical polymerization of several alkyl crotonates (RCr) was carried out in bulk or in benzene in the presence of radical initiators. Homopolymerization of RCr bearing bulky ester alkyl groups, e.g. tert-butyl (tBCr), 1-adamantyl (AdCr), and 3,5-dimethyl-1-adamantyl crotonate (DMAdCr) proceeded to give a polymer with molecular weight of several thousands despite of the steric hindrance and chain transfer by the presence of the β-methyl group, while the methyl and ethyl esters gave no polymer. The kinetics of the polymerization was examined in detail and absolute rate constants were evaluated by means of electron spin resonance spectroscopy. The propagation rate constants of RCr were 0.41–1.0 L/mol s, being much smaller than those of the corresponding methacrylates (530–570 L/mol s). The termination rate constants were also determined from the analyses of steady state and non-steady state polymerizations. Radical copolymerizations of AdCr (M₂) with several vinyl monomers (M₁) were carried out in bulk at 60°C and the rate constants for cross propagations were calculated to examine reactivities of the monomer and its polymer radical. The structure and thermal properties of the resulting poly (AdCr) were also investigated. Onset temperature of decomposition and glass transition temperature of poly(AdCr) were revealed to be much high as 302 and 234°C, respectively. © 1994 John Wiley & Sons, Inc.     

Synthesis,characterization, and modification of poly(tert-butyl methacrylate-b-alkyl methacrylate-b-tert-butyl methacrylate) by group transfer polymerization

Different poly(tert-butyl methacrylate) (PTBMA)-poly(alkyl methacrylate) (PAMA, alkyl=CH₃, n-C₄H₉) triblock copolymers were synthesized by group transfer polymerization. They were obtained by first preparing “living” PAMA using a difunctional initiator, followed by polymerization of TBMA in THF at room temperature, in the presence of a nucleophilic catalyst. The segment molecular weights and compositions of TBMA segment could be controlled by regulating the feed ratio of two monomers and the ratio of monomer to initiator. As supported by ¹H-NMR, IR analysis, and titration, the PTBMA blocks could be quantitatively hydrolyzed into poly(methacrylic acid) (PMAA) blocks whereas the PAMA blocks were not hydrolyzed. The water-soluble amphiphiles prepared by neutralization of the PMAA block displayed surface-active behavior in water, which was characterized by a critical micelle concentration. The thermogravimetric analysis demonstrated the loss of tert-butyl groups. © 1992 John Wiley & Sons, Inc.     

Anionic polymerization of vinyl monomers with xanthates

The polymerization of vinyl monomers with various xanthates (potassium tert-butylxanthate, potassium benzylxanthate, zinc n-butylxanthate, etc.) were carried out at 0°C in dimethylformamide. N-Phenylmaleimide, acrylonitrile, methyl vinyl ketone, and methyl methacrylate were found to undergo polymerization with potassium tert-butylxanthate; however, styrene, methyl acrylate, and acrylamide were not polymerized with this xanthate. In the anionic polymerization of methyl vinyl ketone with potassium tert-butylxanthate, the rate of the polymerization was found to be proportional to the catalyst concentration and to the square of the monomer concentration. The activation energy of methyl vinyl ketone polymerization was 2.9 kcal/mole. In the polymerization, the order of monomer reactivity was as follows: N-phenylmaleimide > methyl vinyl ketone > acrylonitrile > methyl methacrylate. The initiation ability of xanthates increased with increasing basicity of the alkoxide group and with decreasing electronegativity of the metal ion in the series, lithium, sodium, and potassium tert-butylxanthate. The relative effects of the aprotic polar solvents on the reactivity of potassium tert-butylxanthate was also determined as follows: diethylene glycol dimethyl ether > dimethylsulfoxide > hexamethylphosphoramide > dimethylformamide > tetrahydrofuran (for methyl vinyl ketone); dimethyl sulfoxide > hexamethylphosphoramide > dimethylformamide ? diethylene glycol dimethyl ether (for acrylonitrile).     

Synthesis of Styrenic‐Terminated Methacrylate Macromonomers by Nitroanion‐Initiated Living Anionic Polymerization

N‐Isopropyl‐4‐vinylbenzylamine (PVBA) was synthesized and used as an initiator for the polymerization of methacrylates to synthesize macromonomers with terminal styrenic moieties. LiPVBA initiated a living polymerization and block copolymerization of methyl methacrylate, 2‐(N,N‐dimethylamino)ethyl methacrylate and tert‐butyl methacrylate and produced polymers having well‐controlled molecular weights and very low polydispersities (M̄_w/M̄_n < 1.1) in quantitative yield. ¹H NMR analysis revealed that the polymers contained terminal 4‐vinylbenzyl groups. The macromonomers were reactive in the copolymerization with styrene.     

Controlled radical polymerization of methacrylates of various structures in the presence of the AIBN-FeCl3-N,N-dimethylformamide catalytic system

The controlled radical polymerization of methyl methacrylate, 2-ethoxyethyl methacrylate, and tert-butyl methacrylate conducted via atom-transfer radical polymerization in the presence of the AIBN-FeCl₃· 6H₂O-N,N-dimethylformamide catalytic system is studied. For all the systems under study, the rate of reaction is first order with respect to the monomer concentration. The number-average molecular mass of the polymers linearly increases with conversion, and their polydispersity indexes are below 1.6. The rate of polymerization decreases in the following sequence: 2-ethoxyethyl methacrylate > methyl methacrylate > tert-butyl methacrylate. The presence of ω-terminal chlorine atoms in polymer macromolecules is confirmed by ¹H NMR spectroscopy and through the block copolymerization of methyl methacrylate with a poly(ethoxyethyl methacrylate)-based macroinitiator.     

Metallo esters. VII. Stabilizing effect of sodium tert-butoxide on the growth center in the anionic polymerization of methacrylic esters

The growth center in the anionic polymerization of methacrylic esters is stabilized with alkaline alkoxides, sodium tert-butoxide in particular. The lifetime of the growth center was investigated in the polymerization of methyl methacrylate by evaluating yield and molecular weight distribution of the polymer formed when the monomer was added in two doses. The average lifetime of the original growth center stabilized by sodium tert-butoxide at 20°C under the given conditions was longer than several minutes. The stabilization of the growth center was also used in the stepwise copolymerization of n-butyl methacrylate and methyl methacrylate. The copolymer thus obtained in high yield was characterized as a block copolymer on the basis of its solubility, nuclear magnetic resonance (NMR) spectra, and measurements of the complex shear modulus.     

Synthesis and reaction of β‐hydroxyaspartic acid‐based polymethacrylate

O‐Methacryloyl‐N‐(tert‐butoxycarbonyl)‐β‐hydroxyaspartic acid dimethyl ester was synthesized by methyl esterification of β‐hydroxyaspartic acid, followed by protection of the amino group with the tert‐butoxycarbonyl group and then the reaction of the hydroxyl group with methacryloyl chloride. The monomer efficiently underwent radical polymerization to afford the corresponding polymer with a number‐average molecular weight of 42,000 in good yields. The alkaline hydrolysis of the polymer occurred not only at the methyl ester but also at the ester moiety between the main and side chains of the polymer. The methyl ester‐free polymer gradually released β‐hydroxyaspartic acid moiety in a phosphate buffer solution with pH = 7.3 and 7.8. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2782–2788, 2002     

Verbindungen des Germaniums und Zinns. 3. Sterisch überladene Alkylarylstannane durch Übertragung und Isomerisierung von 2,4,6-Tri-tert-butylphenylgruppen

Compounds of Germanium and Tin. 3. Sterically Congested Alkylarylstannanes by Transfer and Isomerization of 2,4,6-Tri-tert-butylphenyl Groups Reaction of SnBr₄ and SnI₄ with 2,4,6-tri-tert-butylphenyllithium (ArLi) by rearrangement of two Ar-groups gives the stannanes ArR₂SnBr ( 3 ) and ArR₂SnI ( 4 ), R = 2-methyl-2(3,5-di-tert-butylphenyl)propyl, which by a further transalkylation reaction with methyl lithium yield ArR₂SnCH₃ ( 5 ). However, treatment of 3 and 4 with tert-butyl lithium exclusively leads to ArR₂SnH ( 6 ) which surprisingly is also obtained by reaction of ArRSnCl₂ with tert-butyl lithium, presumably by an intermolecular R-group transfer. The structures of 5 and 6 were confirmed by X-ray crystallography.     

Effect of alcohols on the gamma-radiation-induced polymerization of ethylene

Gamma-radiation-induced polymerization of ethylene in alcohols such as methyl, ethyl, n-propyl, isopropyl, n-butyl, isobutyl, sec-butyl, tert-butyl, and n-pentyl alcohols was carried out under a pressure of 400 kg./cm.²at 30°C. at a dose rate of 1.4 × 10⁵ rad/hr. in a batch reactor of 100 ml. capacity. The yield and molecular weight of polymer formed in the alcohols (except tert-butyl alcohol) were much lower than those of the bulk polymerization under the same conditions, whereas the addition of tert-butyl alcohol increased the yield and reduced the molecular weight. From the infrared spectra of the polymers and those of the bromination products it was concluded that only primary OH exists in the polymer formed in methyl alcohol and that both primary and secondary OH are in the polymer formed in other primary alcohols. Both secondary and tertiary OH were observed in the polymer when the secondary alcohols were used, and only tertiary OH in the case of tert-butyl alcohol. These polymers were found to contain small amounts of vinylidene unsaturation and methyl group. On the basis of these results the roles of the alcohols in the polymerization are discussed.     

Synthese und Molekülstruktur des (N,N′ -Dimethylpiperazin)lithium-(μ-hydrido)(tert-butyl)bis[bis(trimethylsilyl)methyl]alanats mit intramolekularer Wechselwirkung zwischen Lithium und C?H?σ-Bindungen

Synthesis and Molecular Structure of (N,N′-Dimethyl-piperazine)lithium-(·-hydrido)(tert-butyl)bis[bis(trimethylsilyl)methyl]alanate with an Intramolecular Interaction between Lithium and C? H-σ-Bonds Syntheses and properties of the starting compounds bis[bromo-di(tert-butyl)alane] 3 , bis[dibromo-tert-butyl-alane] 4 , and (tert-butyl)bis[bis(trimethylsilyl)methyl]alane 5 are described. In the presence of 5 and the chelating amine N,N′-dimethylpiperazine lithium tert-butyl gives via μ-elimination isobutene and LiH, which is taken up by the starting alane 5 to give the title compound 6 . No attack of the strong base (lithium alkyl/amine) to the bis(trimethylsilyl) methyl substituent is observed as recently occured for the sterically more crowded tris[bis(trimethylsilyl)methyl]alane. Crystal structure of 6 shows a angled Li? H? Al bridge and a short intramolecular contact between Li and C? H-σ-bonds of a trimethylsilyl group.     

Deoxy-nitrosugars 15th communication Synthesis of N-acetylneuraminic acid and N-acetyl-4-epineuraminic Acid

A synthesis of N-acetylneuraminic acid ( 1 ) and of N-acetyl-4-epineuraminic acid ( 2 , R = H) from 2-acetamido-4,6-O-benzylidene-1,2-dideoxy-1-nitro-D -mannopyranose ( 3 ) and 2-acetamido-1,2-dideoxy-4,6-O-isopropylidene-1-nitro-D -mannopyranose ( 4 ), respectively, is described. Michael addition of 3 and 4 to tert-butyl 2-(bromomethyl)prop-2-enoate ( 5 ) and subsequent hydrolytic removal of the NO₂ group gave the 4-nonulosonate tautomers 6 / 7 and 8 / 9 , respectively (Scheme). Stereoselective reduction of 6 / 7 and 8 / 9 with NaBH₄/AcOH in dioxane/H₂O yielded 12/13 (94:6) and 14/15 (92:8), respectively. Reduction of 6 / 7 and 8 / 9 in the absence of AcOH or in EtOH gave 12 / 13 (15:85) and 14 / 15 (15:85), respectively. Ozonolysis of 12 and 13 followed by hydrolysis gave tert-butyl neuraminate 22 and tert-butyl 4-epineuraminate 24 , respectively. Ozonolysis of 14 / 15 , separation of the products 20 and 21 , and hydrolytic removal of the isopropylidene groups gave 22 and 24 , respectively. The tert-butyl ester 22 was saponified to give 1 , which was further characterized as the methyl ester 23 . Saponification of 24 gave the crude 4-epimer of 1 , which was converted into the stable Na salt 2 and also into the methyl ester 25 .