Investigation of the effect of gamma rays on electrical properties of chlorinated poly (vinyl chloride)

Dielectric constant, dielectric loss and AC conductivity were measured, in the frequency range 100 Hz to 5 MHz in chlorinated poly (vinyl chloride) (CPVC) before and after exposure to gamma irradiation at doses between 5.0 KGy and 50.0 KGy. The frequency dependencies of ε′, ε″ and σ_AC at 30 °C were investigated. A relaxation peak in the dielectric loss and a corresponding step in the dielectric constant have been observed, in the frequency ranges 10³ Hz to 10⁴ Hz. The dielectric constant ε′, dielectric loss ε″ and AC conductivity σ_AC are also found to increase at heating up to 100 °C. In addition the effect of gamma irradiation on the frequency dependencies of ε′, ε″ and σ_AC was measured at room temperature. The gamma irradiation leads to an increase in the efficiency of soft segments. Furthermore, the DC electrical conductivity of both the irradiated and non-irradiated samples was investigated. The induced electrical conductivity and the activation energy were measured, at various temperatures, as a function of gamma dose. It was found that the gamma radiation has a definite effect on the DC conductivity of the CPVC polymer.     

A study of the effect of gamma and laser irradiation on the thermal,optical and structural properties of CR-39 nuclear track detector

A comparative study of the effect of gamma and laser irradiation on the thermal, optical and structural properties of the CR-39 diglycol carbonate solid state nuclear track detector has been carried out. Samples from CR-39 polymer were classified into two main groups: the first group was irradiated by gamma rays with doses at levels between 20 and 300 kGy, whereas the second group was exposed to infrared laser radiation with energy fluences at levels between 0.71 and 8.53 J/cm². Non-isothermal studies were carried out using thermogravimetry, differential thermogravimetry and differential thermal analysis to obtain activation energy of decomposition and transition temperatures for the non-irradiated and all irradiated CR-39 samples. In addition, optical and structural property studies were performed on non-irradiated and irradiated CR-39 samples using refractive index and X-ray diffraction measurements. Variation in the onset temperature of decomposition T _o, activation energy of decomposition E _a, melting temperature T _m, refractive index n and the mass fraction of the amorphous phase after gamma and laser irradiation were studied.

It was found that many changes in the thermal, optical and structural properties of the CR-39 polymer could be produced by gamma irradiation via degradation and cross-linking mechanisms. Also, the gamma dose has an advantage of increasing the correlation between thermal stability of the CR-39 polymer and bond formation created by the ionizing effect of gamma radiation. On the other hand, higher laser-energy fluences in the range 4.27–8.53 J/cm² decrease the melting temperature of the CR-39 polymer and this is most suitable for applications requiring molding of the polymer at lower temperatures.     

Modification induced by gamma irradiation in Bayfol CR 1-4 polycarbonate

Bayfol CR 1-4 polycarbonate is a class of polymeric solid state nuclear track detector which has many applications in various radiation detection fields. Samples from sheets of Bayfol have been irradiated with gamma doses ranging from 100 to 620 kGy. The structural modifications in the gamma-irradiated Bayfol samples have been studied as a function of dose, using different characterization techniques such as X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, intrinsic viscosity and refractive index. The results indicate that the carbonyl group (C?O) degraded under irradiation up to 200 kGy. This degradation, reported by FTIR spectroscopy enhanced the degree of ordering in the degraded samples as revealed by the XRD technique. Above 200 and up to 620 kGy, cross-linking is achieved, leading to an increase in the intrinsic viscosity from 0.41 to 0.78 at 35°C, indicating an increase in the average molecular mass. On the other hand, the resultant effect of gamma irradiation on the thermal properties of Bayfol has been investigated using thermo-gravimetric analysis, results indicating that the gamma irradiation in the dose range 200–620 kGy led to a more compact structure of Bayfol polymer, which resulted in an improvement in its thermal stability with an increase in the activation energy of thermal decomposition due to cross-linking. In addition, the V–I characteristics of the polymer samples were performed, results indicated that at higher voltage, the conduction mechanism of Bayfol CR 1-4 was identified as the Poole–Frenkel type.     

Thermal and optical properties of electron beam irradiated cellulose triacetate

Samples from Cellulose triacetate (CTA) sheets were irradiated with electron beam in the dose range 10–200 kGy. Non-isothermal studies were carried out using thermogravimetric analysis (TGA) to obtain the activation energy of thermal decomposition for CTA polymer. The CTA samples decompose in one main break down stage. The results indicate that the irradiation by electron beam in the dose range 80–200 kGy increases the thermal stability of the polymer samples. Also, the variation of melting temperatures with the electron dose has been determined using differential thermal analysis (DTA). The CTA polymer is characterized by the appearance of one endothermic peak due to melting. It is found that the irradiation in the dose range 10–80 kGy causes defects generation that splits the crystals depressing the melting temperature, while at higher doses (80–200 kGy), the thickness of crystalline structure (lamellae) is increased, thus the melting temperature increases. In addition, the transmission of these samples in the wavelength range 200–2500 nm, as well as any color changes, were studied. The color intensity ΔE* was greatly increased on increasing the electron beam dose, and accompanied by a significant increase in the blue color component.      

Effect of electron beam irradiation on the structural,thermal and optical properties of poly(vinyl alcohol) thin film

Poly(vinyl alcohol) (PVA) polymer was prepared using the casting technique. The obtained PVA thin films have been irradiated with electron beam doses ranging from 20 to 300 kGy. The resultant effect of electron beam irradiation on the structural properties of PVA has been investigated using X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR), while the thermal properties have been investigated using thermo-gravimetric analysis and differential thermal analysis (DTA). The onset temperature of decomposition T ₀ and activation energy of thermal decomposition E _a were calculated, results indicate that the PVA thin film decomposes in one main weight loss stage. Also, the electron beam irradiation in dose range 95–210 kGy led to a more compact structure of the PVA polymer, which resulted in an improvement in its thermal stability with an increase in the activation energy of thermal decomposition. The variation of transition temperatures with electron beam dose has been determined using DTA. The PVA thermograms were characterized by the appearance of an endothermic peak due to melting. In addition, the transmission of the PVA samples and any color changes were studied. The color intensity Δ E was greatly increased with increasing electron beam dose, and was accompanied by a significant increase in the blue color component.     

Spectroscopic and thermal studies of gamma irradiated polypropylene polymer

Thin films of polypropylene have been irradiated with different doses of gamma radiation from a ⁶⁰Co source. IR, UV-VIS spectra of this polymer before and after irradiation have been recorded and from the spectral data some modifications in the properties have been investigated. The spectra indicated that polypropylene film was oxidised at the dose of 10⁶ Gy. Due to the removal of additives, total destruction of the polymer takes place at this dose. Isotactic arrangement of the polymer is no longer present after irradiation. Growth of carbon cluster takes place above a gamma dose of 10² Gy. Thermal stability of the polymer changes due to irradiation and the polymer seems to decompose in four different steps at the highest dose of 10⁶ Gy.     

Physical changes associated with gamma doses of PM-555 solid-state nuclear track detector

The effect of gamma irradiation on the electrical, molecular and structural properties of copolymers of methacrylic esters and olefins, PM-555 solid-state nuclear track detector was investigated. DC conductivity measurements were studied in the temperature range 293–$\text{417}\text{K}$ using solid-state samples of the PM-555 polymer. These samples were irradiated with gamma doses in the range 5–$\text{63}\text{kGy}$. Furthermore, the activation energy was measured, at various temperatures, as a function of the gamma dose. It was found that many changes in electrical resistance of PM-555 polymer could be produced by gamma irradiation via the degradation mechanism. Also, the gamma dose gives an advantage for the increasing correlation between the DC conductivity and the number and mobility of the charge carriers created by the ionizing effect of gamma radiation. Moreover, solutions of different loadings (0.2%, 0.4%, 0.6% and 0.8%) were prepared from the irradiated and non irradiated sheets using pure chloroform as a solvent. The effect of both temperature and gamma dose on the intrinsic viscosity of the liquid samples, as a measure of the mean molecular mass of the PM-555 polymer, were studied. In addition, structural and optical property studies using X-ray diffraction and refractive index measurements were performed on all irradiated and non irradiated PM-555 samples. The results indicate that both the degree of ordering or disordering and the anisotropic character of the PM-555 polymer are dependent on the gamma dose.     

Gamma-photon induced modifications in Polyvinylchloride (PVC) film

Gamma photon induced modifications in Polyvinylchloride (PVC) polymer have been studied in the dose range of 10¹-10⁶Gy at room temperature. Polyvinylchloride films have been irradiated with different doses of gamma radiation from a ⁶⁰Co source. To monitor the chemical and structural changes caused by gamma radiation IR and UV-Vis spectroscopy of pristine and irradiated PVC have been performed and using the spectral data some changes in the properties have been investigated. The spectral studies have indicated that at a dose of 10⁶Gy scissioning of the C-a bonds takes place. This scissioning of the chain initiates decomposition at a lower temperature. Thermal stability of the polymer reduces due to irradiation but the decomposition patterns remain the same. The optical band-gap is found to decrease due to irradiation at doses bigher than 10³Gy.     

Effect of gamma irradiation on the structural,thermal and optical properties of Makrofol BL 2–4

Makrofol BL 2–4 is an extrusion film based on Makrolon polycarbonate. It comprises excellent die-cutting performance combined with high light transmission and moderate light scattering properties. It is a class of polymeric solid state nuclear track detectors which has many applications in various radiation detection fields. In the present work, Makrofol samples were irradiated using different gamma doses ranging from 10 to 350 kGy. The structural modifications in the gamma-irradiated Makrofol samples have been studied as a function of dose using different characterization techniques such as X-ray diffraction, intrinsic viscosity, Fourier transform infrared spectroscopy, thermogravimetric analysis, refractive index and color difference studies. The gamma irradiation in the dose range 20–200 kGy led to a more compact structure of Makrofol polymer, which resulted in an improvement in its thermal stability with an enhancement in its structural and optical properties.     

Gamma-induced modifications of polycarbonate polymer

Gamma-induced modifications in polycarbonate polymer have been studied in the dose range of 10¹–10⁶ Gy. Thin films of polycarbonate have been irradiated with different gamma doses from a Co⁶⁰ source. To monitor the modifications caused by gamma radiation, FT-IR, differential scanning calorimetry and X-ray diffraction studies have been performed. The studies have indicated that at the dose of 10⁶ Gy, phenolic group forms through scissioning of ester linkage. Though the effect of radiation is most significant at the highest dose, the process of modifications starts at 10³ Gy. Scissioning of the polymeric chain initiates a different morphological zone within the polymer matrix, and the polymer becomes more crystalline with increasing dose. Owing to chain scissioning, the mobility of the polymer increases, which in turn reduces the glass transition temperature of the polymer.     

Modifications induced by gamma irradiation upon structural,optical and chemical properties of polyamide nylon-6,6 polymer

The effects of gamma rays were studied on the optical, structural and chemical properties of the PA-66 polymer samples. The polymer samples obtained from Goodfellow (Cambridge, UK) were irradiated with gamma rays at various doses ranging from 100 to 1250 kGy. The pristine and gamma rays irradiated samples were characterized by UV–visible (UV–VIS) spectroscopy, X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. UV–VIS shows a shift in absorption toward the visible region for irradiated samples and a decrease in band gap energy (E_g). The XRD analyses show an increase in the crystalline nature of the polymer at higher doses as a result of significant decrease in the peak width of XRD patterns. The FTIR spectra show decrease in intensity and shift of various bands with increase in gamma dose.     

Effect of gamma-irradiation on the structural,optical and electrical properties of PEO/starch blend containing different concentrations of gold nanoparticles

ABSTRACT

Blend of polyethylene oxide (PEO)/starch (70/30 wt.%) filled with different amounts of gold nanoparticles (AuNPs) were prepared using the casting technique. X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) techniques were used to investigate the structure of polymeric samples before and after exposing to gamma irradiation at different times. XRD showed a gradual decrease in intensity of crystalline peaks with increasing the gamma dose denotes a decrease in the amount of crystalline phase in the films, while the FTIR measurement shows induced changes in chemical structure assigned to the AuNPs amount and irradiation times. The optical energy gap values (E_g) for unirradiated and irradiated samples were calculated and interpreted. The differential scanning calorimetry (DSC) which showed the miscibility between the two components of the blend. The electrical conductivity (σ) measurement was showed increased in electrical conductivity after exposure to the gamma dose. The gold nanoparticles were used as nano?ller to improve the structural and electrical properties of polymeric samples. The results showed the Gamma irradiation significantly effect on the structural and electrical properties of PEO/starch blend.     

Structural,dielectric and ac conductivity properties of Ni-doped HoFeO3 before and after gamma irradiation

A series of samples of HoFe_1?x Ni _x O₃ (x = 0.0, 0.1, 0.3) were prepared using the solid-state reaction technique to understand the structural, dielectric and conductivity properties before and after gamma irradiation of accumulated dose of 625 KGy. The X-ray diffraction confirms that all the samples exist in single-phase orthorhombic structure having space group Pbnm. With increasing dopant Ni, the unit cell volume and lattice parameters undergo small change. X-ray analysis show change in the interplanar spacing and full width at half maximum values after gamma irradiation. The Raman spectra of the samples show modifications after gamma irradiation. It can be easily seen that after gamma irradiation intensity, peak width are completely altered by gamma-absorbed dose. Measurement of dielectric loss and dielectric constant at room temperature was performed before and after gamma irradiation in the frequency range of 20 Hz–1 MHz. It is observed that the value of dielectric constant decreases after irradiation. The ac conductivity is estimated from the dielectric constant and loss tangent. Exposure to gamma radiation results in substantial modification in the physical properties of the Ni-doped Ho-based orthoferrites.     

Polydimethylsiloxane rubber gamma radiation effect studies by positron annihilation lifetime spectroscopy

Polydimethylsiloxane rubber was irradiated at various radiation doses up to 800 kGy in air. The lifetime and intensity of the long component τ₃ were obtained by positron annihilation lifetime spectroscopy (PALS). The crystallization property and the molecular flexibility were estimated using the differential scanning calorimetry and dynamic thermomechanic analysis. Thermal volatile property was determined by thermogravimetry analysis. It was proved that the cross-linking reaction made the chain flexibility of the rubber to reduce gradually during gamma radiation, which resulted in the reduction of the o-Ps intensity observed by PALS. Although the degradation effect existed during gamma radiation, it was still less significant than the cross-linking effect when the radiation dose was up to 800 kGy.     

Effect of ϒ- irradiation and study of ϒ-induced physico-chemical changes in high performance thermoset obtained by double cycloaddition of munchnone and bis-maleimide

ABSTRACT

Techniques in polymer synthesis are taking different dimensions in the last few decades. Reversible-deactivation radical polymerization processes resulted in a wide range of polymeric architectures made from an almost infinite reservoir of functional building blocks. The concept of click chemistry revolutionized the way how polymer chemists approached synthetic routes. Among the few reactions that could qualify as click approach; the copper-catalyzed azide–alkyne cycloaddition reaction is in the front place. Whether click or not, cycloadditions are powerful tools for designing polymeric materials in a modular fashion, with a high level of functionality and, sometimes responsiveness. Thus we have developed an efficient synthetic platform for the preparation of a new class of polyimide-based high-performance thermosets (HPTs) based on the double 1,3-dipolar cycloaddition of munchnone with bis-maleimides. It is worth mentioning that this report is the first to deal with the changes in physico-chemical properties of HPTs obtained by cycloaddition reaction due to gamma irradiation. The polymers synthesized by this unique technique were irradiated with gamma doses in the range 10–300?kGy. The consequential effect of gamma radiation and the structural modifications induced on HPTs have been studied and discussed as a function of dose using different characterization techniques such as Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry-thermogravimetric analysis (DSC-TGA), Field Emission Scanning Electron Microscopy (FESEM) and UV-Vis Spectroscopy.     

Influence of gamma radiation on morphology structure,electrochemical corrosion behavior and hardness of Ni–Cr based alloys

This study evaluates the effects of gamma radiation on structure, electrochemical corrosion behavior and Vickers hardness of commercial dental Nikkeli–Kromi–Polttosekoitus [Ni_65.2Cr_22.5Mo_9.5X_2.8 (X=Nb, Si, Fe and Mn)] alloy. The corrosion rate of Ni_65.2Cr_22.5Mo_9.5X_2.8 (X=Nb, Si, Fe and Mn) alloy with 0.5 M HCl is increased with increasing the exposure rate of gamma radiation. The corrosion resistance of Ni_65.2Cr_22.5Mo_9.5X_2.8 (X=Nb, Si, Fe and Mn) is varied and reaches a minimum value at 30 KGy. The corrosion potential value also is varied and reaches its highest value at 30 KGy. The Vickers hardness value of Ni_65.2Cr_22.5Mo_9.5X_2.8 (X=Nb, Si, Fe and Mn) alloy is decreased by increasing the gamma radiation dose. Also it is obvious from our results that the effects of gamma radiation at the surface are much higher as compared with deeper parts and the structure of the alloy is changed due to its exposure to gamma radiation.     

Investigation of irradiated 1H-Benzo[b]pyrrole by ESR,thermal methods and learning algorithm

1H-Benzo[b]pyrrole samples were irradiated in the air with gamma source at 0.969?kGy per hour at room temperature for 24, 48 and 72?h. After irradiation, electron spin resonance, thermogravimetry analysis (TGA) and differential thermal analysis (DTA) measurements were immediately carried out on the irradiated and unirradiated samples. The ESR measurements were performed between 320 and 400?K. ESR spectra were recorded from the samples irradiated for 48 and 72?h. The obtained spectra were observed to be dependent on temperature. Two radical-type centres were detected on the sample. Detected radiation-induced radicals were attributed to R-^+?NH and R=^?CC₂H₂. The g-values and hyperfine constants were calculated by means of the experimental spectra. It was also determined from TGA spectrum that both the unirradiated and irradiated samples were decomposed at one step with the rising temperature. Moreover, a theoretical study was presented. Success of the machine learning methods was tested. It was found that bagging techniques, which are widely used in the machine learning literature, could optimise prediction accuracy noticeably.     

Radiation dose measurements for staff members involved in holmium-166 preclinical trial

AimNeutron-activated holmium-166 (¹⁶⁶Ho) is an excellent radionuclide for internal radiation therapy (Eβmax = 1.84 MeV) with an appropriate half-life (26.8 h), which emits photons (81 keV, 6.2%) suitable to be detected by gamma cameras. Preparing and injecting radiopharmaceuticals containing beta/gamma emitting holmium-166 implies a risk of exceeding the upper limit for skin and hand radiation equivalent doses (500 mSv/an). This study was aimed to estimate the whole body and finger exposure for staff responsible for dose preparation, dose dispensing, and dose injection of holmium-166 therapy.MethodsTo measure the finger dose from external exposure, all staff members wore TLD dosimeters. Personal dose equivalents Hp(10) were measured using electronic personal dosimeters (EPD MK2, Thermo Fischer Scientific) placed on the left side of the chest. During our study, staff members administered more than 40 ¹⁶⁶Ho-based therapies for preclinical trial. Appropriate radiation safety procedures and shielding were applied at each stage.ResultsIn this study, the whole body doses were 2.80 ± 1.56 nSv MBq⁻¹ for one ¹⁶⁶Ho-therapy preparation/formulation, and 2.68 ± 1.70 nSv MBq⁻¹ for one intravenous injection. Maximum finger doses were 2.9 ± 0.2 μSv MBq⁻¹ and 2.5 ± 0.3 μSv MBq⁻¹ for preparation and injection, respectively (activities injected: 72 ± 3 MBq).ConclusionExtrapolated annual doses from 300 ¹⁶⁶Ho radionuclide therapies were lower than the annual limit doses for skin and the whole body, 500 mSv and 20 mSv, respectively, reported in the European Directive EURATOM 96/29 when applying appropriate radiation protection standards. However, these doses have to be added to other diagnostic or therapeutic protocols, performed in preclinical facilities.     

Synthesis and Characterization of a Novel Self-colored Fluorescent Polycarbonate Urethane based on the 1,8-Naphthalimide Group

Abstract

The synthesis of a novel self-colored polyurethane (PU) is described using 4-amino-N-propanoic acid-1,8-naphthalimide dye. To synthesize the self- colored PU, the dye was added to the PU prepolymer at the chain extension step. PU and self-colored PU were characterized by using Fourier transform infrared spectroscopy (FTIR), UV-visible spectroscopy and Fluorometry. The thermal behavior of the PU and self-colored PU were investigated by differential scanning calorimetry (DSC). The spectra indicated that the addition of dye to the polymer chain did not affect the glass transition temperature (T_g?=?-39?°C). Tensile strengths and Young’s modulus of the samples were assessed using a tensile strength test; they revealed that addition of the dye to the polymer structure enhanced the Young’s modulus and increased the mechanical strength of the PU. X-ray diffraction (XRD) was used for evaluation of the crystal phase of the polymer; it revealed that both components were amorphous.     

Impact of γ-rays on constructional,optical and thermal behavior of alkaline and non alkaline low density polyethylene

ABSTRACT

In this study, we investigated the graft copolymerization of methyl methacrylate (MMA) onto low-density polyethylene (LDPE) in the presence of aniline as an inhibitor by gamma radiation. An alkaline treatment was carried out for the prepared graft copolymer. The structural properties of the prepared samples were examined via X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD peaks were slightly shifted, indicating an interaction between MMA and the polyethylene matrix. The morphology of the samples confirmed the homogenous grafted phase scattered onto the LDPE surface. Analysis of the absorption spectra indicated an allowed indirect transition mechanism. The Urbach energy (E_U) results showed that the value of the E_U for grafted LDPE was found to be higher than that of pure LDPE—up to 15?kGy irradiation dose, although this value decreases upon grafting. However, the value of the E_U for alkaline-treated grafted films decreases systematically by increasing the degree of grafting. The thermogravimetric analysis (TGA) of the sample indicated that the thermal stability of LDPE samples is significantly changed by grafting MMA onto it. Horowitz and Metzger's models were utilized to measure the activation energy of the thermal decomposition of all samples.