Synthesis,stereostructure, and conformations of novel bi- and trifunctional (+)-isomenthone derivatives

[reaction: see text] Following protection, keto alcohols 4 [from (+)-isomenthone] undergo reduction to 1,3-diol 6 (S configuration at the new stereocenter). Organometallic C-nucleophiles add to the carbonyl with the same facial selectivity as hydride, providing multifunctional derivatives, e.g., 8 and 9, with five contiguous stereocenters. The side chain hydroxyl of 4 is elaborated into amino and amide derivatives (e.g., 12). Structural analysis shows that 6, 8, 9, and the precursor to 12 (10) all adopt triaxial solid-state conformations.     

Anion exchangers functionalized by chelating reagents (AnChel) for preconcentration of trace elements: Capabilities and limitations

Summary Conventional anion exchangers (e.g., Adsorbex SAX, Amberlite IRA 410, Dowex 1X8, Lewatit MP 5080, TEAE cellulose) functionalized by means of sulfonated metal reagents (e.g., Arsenazo III, Eriochrome Red B, 8-hydroxyquinoline-5-sulfonic acid, Tiron and others) were investigated as collectors (AnChel) for analytical preconcentration of trace elements. In particular, the stability of AnChel strongly depending on competing anions, on the anion exchanger and on the metal reagent chosen, was characterized. Accordingly, for appropriate combinations of AnChel (e.g., Dowex 1X8/Arsenazo III) reagent distribution coefficients K_d in the range 10⁴ to 10⁵ (ml/g) could be attained on polystyrene-based anion exchangers even in concentrated salt solutions (e.g., 4 mol/l NaCl), but not on hydrophilic exchangers (e.g., SAX, TEAE cellulose). In general, the stability of AnChel against competing anions followed the order Cl^–>SO ₄ ^2– >NO ₃ ^– >ClO ₄ ^– . Reagent loadings of about 1 mmol/g (e.g., 8-hydroxyquinoline S) on the anion exchangers were obtainable. Trace metals precomplexed with the reagents cited could be separated (>90%) within 5 min and remobilized by acid (e.g. 2 mol/l HNO₃) within some 10 s (batch procedure). Using small columns filled with anion exchanger (e.g., 0.25 g Dowex 1X8) fast trace-matrix separations were carried out with 8-hydroxyquinoline S (Cu, Fe, In, Mn, Pb, Zn) in MgCl₂ solutions and with Arsenazo III (U, Th) in AlCl₃ solution, respectively. For subsequent trace determinations the flame-AAS (injection technique) was applied, except for Th and U [quantified by total reflection X-ray fluorescence (TXRF)].     

Aldol addition of lithium and boron enolates of 1,3-dioxan-5-ones to aldehydes. A new entry into monosaccharide derivatives

Methods allowing control of stereoselectivity in aldol reactions of enolates derived from 1,3-dioxan-5-ones (4) are described. Boron enolates, generated in situ, react with benzaldehyde to give the corresponding anti aldol selectively (the anti:syn ratio of up to 96:4) and in high yield. Lithium enolates give high anti selectivity only with aldehydes branched at the alpha-position. Enantioselective deprotonation of C(S) symmetrical dioxanones (e.g., 4b) can be accomplished efficiently, with enantiomeric excess of up to 90%, with chiral lithium amide bases of general structure PhCH(Me)N(Li)R (9, 10) if the R group is sufficiently bulky (e.g, R = adamantyl) or is fluorinated (e.g., R = CH2CF3). Dioxanone boron and lithium enolates react readily with glyceraldehyde derivatives (19), yielding protected ketohexoses (20 and 21).     

Cyclopentadienyl ruthenium, rhodium, and iridium vertices in metallaboranes: geometry and chemical bonding

Most cyclopentadienylmetallaboranes containing the vertex units CpM (M = Co, Rh, Ir; Cp = eta(5)-cyclopentadienyl ring, mainly eta(5)-Me(5)C(5)) and CpRu donating two and one skeletal electrons, respectively, have structures closely related to binary boranes or borane anions. Smaller clusters of this type, such as metallaborane analogues of arachno-B(4)H(10) (e.g., (CpIr)(2)B(2)H(8)), nido-B(5)H(9) (e.g., (CpRh)(2)B(3)H(7) and (CpRu)(2)B(3)H(9)), arachno-B(5)H(11) (e.g., CpIrB(4)H(10)), B(6)H(6)(2)(-) (e.g., (CpCo)(4)B(2)H(4)), nido-B(6)H(10) (e.g., CpIrB(5)H(9) and (CpRu)(2)B(4)H(10)), and arachno-B(6)H(12) (e.g., (CpIr)(2)B(4)H(10)), have the same skeletal electron counts as those of the corresponding boranes. However, such clusters with eight or more vertices, such as metallaborane analogues of B(8)H(8)(2)(-) (e.g., (CpCo)(4)B(4)H(4)), arachno-B(8)H(14) (e.g., (CpRu)(2)B(6)H(12)), and nido-B(10)H(14) (e.g., (CpRu)(2)B(8)H(12)), have two skeletal electrons less than those of the corresponding metal-free boranes, analogous to the skeletal electron counts of isocloso boranes relative to those of metal-free deltahedral boranes. Some metallaboranes have structures not analogous to metal-free boranes but instead analogous to metal carbonyl clusters such as 3-capped square pyramidal (CpRu)(2)B(4)H(8) and (CpRu)(3)B(3)H(8) analogous to H(2)Os(6)(CO)(16) and capped octahedral (CpRh)(3)B(4)H(4) analogous to Os(7)(CO)(21). In the metallaborane structures closely related to metal-free boranes, the favored degrees of BH and CpM vertices appear to be 5 and 6, respectively.     

Effect of standard phase differences between gas and liquid and the resulting experimental bias in the analysis of gaseous volatile organic compounds

Liquid- or gas-phase standards can be used for the analysis of VOCs in air. Once the accuracy is secured in the standard preparation stage, the use of gas-phase standard should be more reliable with the least matrix effect. However, it is not difficult to find that the liquid-phase standard is used more preferably in many laboratories for several reasons (e.g., low expense, easy handling, etc.). As such, one needs to accurately evaluate any possible bias stemming from the use of different standard phases. To this end, standards for 8 VOCs consisting of 4 aromatic compounds (benzene (B), toluene (T), styrene (S) and p-xylene (p-X)) and 4 others (methyl ethyl ketone (MEK), methyl isobutyl ketone (MIBK), butyl acetate (BuAc), and isobutyl alcohol (i-BuAl)) were prepared in both liquid and gas phases. Each standard was analyzed by the initial collection on the adsorption tube and by the combined application of thermal-desorption–gas chromatography–mass spectrometry (TD/GC/MS). The results indicated that experimental bias between the two phases, if expressed in terms of percent difference (PD), was very low in many target VOCs (B (1.09%), T (2.41%), p-X (3.64%), MEK (6.76%), and MIBK (0.17%)), while it was not in some targets (e.g., >10%: e.g., S, i-BuAl, and BuAc). In an ancillary experiment, biases were evaluated further by (1) calibrating gaseous samples against liquid phase standard and via (2) comparison between two different types of gas phase standards. In conclusion, treatment of different standards (e.g., between the same or different phases) will inevitably induce biases in most VOCs, although certain volatiles (e.g., benzene, MIBK, etc.) are virtually unaffected by such variables in a practical sense.     

Synthesis and polymerization of 2-alkylanilines

2-Alkylanilines with alkyl groups in the range of 4–15 carbon atoms were synthesized via a known method as well as via a more general path which should allow the introduction of a larger variety of substituted alkyl groups into the ortho position of aniline, e.g., alkenyl or OH, NH₂, COOH, and phenyl functionality. Polymerization was found to be achievable according to a method previously described for unsubstituted aniline, i.e., chemically with Cu(ClO₄)₂ · 6H₂O in acetonitrile. Intrinsic viscosities of the obtained poly(2-alkylaniline)s lay between 0.10 and 0.26 dL/g (97% H₂SO₄ at 30°C). The dc conductivity of the HCl salts decreased with increasing length of the alkyl side chains from 1 S/cm (polyaniline) over 3 X 10^?4 S/cm [poly(2-butylaniline)] to 1 X 10^?6 S/cm poly(tridecylaniline). Further characterization of the polymers were performed by means of UV/VIS/NIR-and-IR spectroscopy, in dilute solutions or as KBr pellets, respectively, and by solubility tests. © 1993 John Wiley & Sons, Inc.     

Generalized principle of designing neutral superstrong Brønsted acids

A generalized principle of designing superstrong Br?nsted acids is suggested according to the following scheme: M=O --> M=Z(X)(n). It consists of the formal replacement of =O fragment in carbonyl, sulfonyl, etc. groups in various acidic systems (e.g., CH(3)CHO, FSO(3)H, where M is the CH(3)CH= or FSO(2)H=fragment, respectively) by =NSO(2)F, =NCN, =C(CN)(2), =P(SO(2)F)(3), =S(CN)(4), or any other formally bivalent group =Z(X)(n) (where the formal valency of the central atom Z is n + 2), leading to highly acidic systems (e.g., HC(=P(CN)(3))NH(2), FS(=C(CN)(2))(2)OH, etc.). It is demonstrated that in several cases the introduction of the double-bonded substituent at the central atom (e.g., N, C, P, S, Cl) that carries the potentially acidic proton or the acidity site (e.g., OH, NH(2), CH(3), etc. groups) will lead to the enormous (up to ca. 120 kcal/mol or 88 pK(a) units!) increase of the intrinsic acidity of the respective parent acid. The acidity of the resulting acids and the scope and limitations of the principle are explored using density functional theory calculations at B3LYP 6-311+G level. Some of the resulting acids (or their anions) were found to undergo fragmentation in the course of the geometry optimization. The general trend that follows from the results of the calculations is that the stability of the resulting compounds is influenced by both the M and the Z. If M is a first row element (carbon or nitrogen), then stable species are produced with almost any Z. If M is a second row element (sulfur or phosphorus), then the species with first row Z are mostly predicted to be stable, but most of the species with second row Z are expected to undergo fragmentation during the geometry optimization. The Z = N and Z = C derivatives (e.g., =NSO(2)CF(3), =C(CN)(2), =C(SO(2)CF(3))(2), etc.) are predicted to be the most stable. However, they have relatively modest electron-accepting power as compared to their penta-, hexa-, and heptavalent counterparts. The acidifying effects of the =Z(X)(n)() groups with the same X increase with increasing n: =NCN < =C(CN)(2) < =P(CN)(3) < =S(CN)(4) and =NSO(2)F < =C(SO(2)F)(2) < =P(SO(2)F)(3). Also, the acidifying effect of a fluorosulfonyl-substituted substituent is higher than that of the corresponding cyano-substituted substituent.     

Electrical conductivity of π-conjugated polymers with nitro substituents

π-Conjugated polymers bearing nitro substituent(s), e.g., poly(aryleneethynylene) (PAE) type polymers and poly(4,8-dinitroanthraquinone-1,5-diyl) P(4,8-NO₂-1,5-AQ), show semiconducting properties with electrical conductivities of an order of 10⁻⁷ to 10⁻⁶ S · cm⁻¹ at room temperature without special oxidation and reduction of the polymer. P(4,8-NO₂-1,5-AQ) shows a large shift of phase in alternating current (ac) measurements and a unique magnetism at low temperature.     

2,5-Bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4-(2H,5H)-dione-based donor-acceptor alternating copolymer bearing 5,5'-di(thiophen-2-yl)-2,2'-biselenophene exhibiting 1.5 cm2·V(-1)·s(-1) hole mobility in thin-film transistors

A novel diketopyrrolopyrrole-based π-conjugated copolymer P(DPP-alt-DTBSe), 5, and a known copolymer P(DPP-alt-QT), 4, have been synthesized in 80-90% yield using the Stille coupling reaction. The molecular weights of 4 and 5 are 58,781 and 19,271 g/mol, respectively, with polydispersity values of 3.25-3.35. A relatively small band gap of 1.32-1.39 eV and excellent solubility in organic solvents were achieved in the two polymers. Thin-film transistors made of 5 exhibit outstanding performance (e.g., μ > 1.0-1.5 cm(2)·V(-1)·s(-1), I(on)/I(off) > 10(5)-10(6)) with a conventional n-octyltrichlorosilane-SiO(2) gate dielectric.     

Highly efficient triplet chain isomerization of Dewar benzenes: adiabatic rate constants from cage kinetics

Quantum yields as high as 120 were achieved for triplet-sensitized photoisomerizations of several Dewar benzene reactants, R, to the corresponding benzene products, P. Considerable chain amplification is maintained even at high conversion. All relevant rate constants of this triplet chain reaction were extracted from laser flash photolysis plus steady-state photolysis experiments. The crucial rate constant ka for adiabatic isomerization of the triplet reactant to triplet product (R* --> P*) cannot be directly measured because it is so large relative to the bimolecular rate of R* formation via sensitization. However, ka was obtained indirectly using a cage/encounter complex model to analyze the competition between the dissociation of encounter pairs with the sensitizer, e.g., S/R* --> S + R*, and the in-cage processes, S/R* --> S/P* --> S*/P, in nonviscous and viscous solvents. These measurements yielded ka values of (approximately 4-9) x 10(9) s(-1), which suggests that only a small (approximately 3 kcal/mol) energy barrier exists along the potential energy surface from R* to P*. Steady-state data indicated that the chain-terminating rate constant R* --> R is negligibly small, an ideal condition for chain amplification. Triplet energy transfer from a series of sensitizers to the Dewar benzene derivatives shows a nonclassical falloff in rate constants with decreasing sensitizer triplet energy, suggesting energy transfer to thermally distorted configurations having lower singlet-triplet energy gaps. As a result of distorted geometries of R* and P*, the chain-propagating energy transfer from P* to R proceeds with a rate constant of only approximately 2 x 10(7) M(-1) s(-1), despite strong exothermicity. The isomerization reaction can release over 100 kcal/kcal of absorbed photons due to the high-energy content of the reactant together with the large chain length.     

Synthesis of 3-substituted bicyclic imidazo[1,2-d][1,2,4]thiadiazoles and tricyclic benzo[4,5]imidazo[1,2-d][1,2,4]thiadiazoles

A versatile synthetic route to potentially useful fused-ring [1,2,4]thiadiazole scaffolds (e.g., 7a and 10b) via exchange reactions of the precursor [1,2,4]thiadiazol-3-(2H)one derivatives (e.g., 6 and 9) with appropriately substituted nitriles (e.g., cyanogen bromide or p-toluenesulfonyl cyanide) under mild conditions is described. For example, the tricyclic 3-bromo [1,2,4]THD derivative (7a) underwent S(N)Ar substitution with a variety of nucleophiles, which included amines, malonate esters and alcohols. Likewise, the bicyclic 3-p-tosyl [1,2,4]THD (10b) was employed as a template in reaction with diamines, and the resulting substituted diamines (e.g., 12a or 12e) were further selectively derivatized at the N1 and/or N2 positions in a linear fashion. The X-ray crystal structure of the 3-methyl bicyclic [1,2,4]THD (21) was obtained, and selective methylation at the N1 position via a protection-alkylation-deprotection protocol, as illustrated in Scheme 6, was confirmed. Alternatively, a short convergent synthesis of N1-functionalized derivatives from the reaction of 10b with appropriately substituted secondary amines was also developed. Hence, these synthetic strategies were advantageously exploited to provide access to a variety of diversely derivatized 3-substituted fused-ring [1,2,4]thiadiazole derivatives.     

熔融法制样-X射线荧光光谱法测定锌精矿中主、次组分含量

应用X射线荧光光谱法测定了锌精矿中主次量组分(包括锌、硫、铁、硅、铅、铜、砷、银、镉、锡及锑)。锌精矿样品(0.6g)与6.3g四硼酸锂和3.2g硝酸锂置于铂-金坩埚中拌匀,先在500℃随即升至700℃灼烧10min,使样品中的硫离子预氧化为硫酸盐。硝酸锂与四硼酸锂生成四硼酸锂和偏硼酸锂混合物熔剂,在1 030℃熔融样品10min,将熔化的样品倒入样模中,冷却后脱模所得熔块用于X射线荧光光谱分析。对在预氧化及熔融过程中由于样品组成变化及质量的增加所造成的基体干扰,采用基于Sherman方程的可变理论α影响系数法进行校正。在所测定的元素中,锌和硫的校准曲线范围依次为27%～62%和10%～35%,两者的标准偏差均小于0.2%。应用所提出的方法分析了2个CRM(GBW 07168和SRM 113b),所得测定值与认定值一致。     

Agostic bonds in cyclometalation

Cyclometalation reactions proceed very easily with one step reaction between metal compounds and substrates having a heteroatom such as O, S, N, P and As. However, under mild reaction conditions, many agostic compounds which are intermediates in these cyclometalation reactions, can be isolated. The metal compounds used for the formation of these agostic intermediates are both transition metal and main group metal compounds. The substrates are nitrogen-containing compounds, phosphorus-containing compounds, oxygen-containing compounds and sulfur-containing compounds. These agostic intermediates are mainly δ-C-H agostic compounds, some are γ-C-H agostic compounds and very few are ?-C-H-agostic compounds. The agostic intermediates are prepared, usually, under mild reaction conditions in the cyclometalation reaction. These agostic compounds are also prepared from cyclometalation reaction products, e.g., by the protonation, irradiation, and elimination of ligand molecules by vacuum, inert gas current, dehydration with a molecular sieves 4A, etc. Some agostic compounds are utilized for preparation of stable catalysts, e.g., hydrogenation catalysts.     

Intramolecular hydrogen-bond-assisted planarization of asymmetrically functionalized alternating phenylene-pyridinylene copolymers

We report on the synthesis and characterization of a series of asymmetrically functionalized amphiphilic polymers with alternating pi-donor units (e.g., substituted benzene) and pi-acceptor units (e.g., pyridine) along the polymer backbone. The purpose of our present work involves incorporation of functional groups along the main chain to form intrachain hydrogen bonds, which promote planarization of the polymer backbone, and to fine-tune the optical properties. The structure-property relationship of polymers P1-P6 was investigated by means of analytical methods, such as FTIR spectroscopy, 1H and 13C NMR spectroscopy, UV/Vis spectroscopy, fluorescence spectroscopy, gel permeation chromatography, thermogravimetric analysis, cyclic voltammetry, and X-ray powder diffraction. All polymers were soluble in common organic solvents, and the optical and fluorescence spectra of the polymers showed significant changes according to the formation (P4, P5) or absence (P6) of intramolecular hydrogen bonding along the polymer backbone. Moreover, the 2,6- or 3,5-linkage of the pyridine rings in P5 and P6, respectively, reduced the conjugation along the polymer backbone and this is reflected in their optical properties. The optical properties of the polymers were influenced by the addition of acid (P1-P6), base (P4-P6), and metal ions (e.g., Cu2+, Fe3+, Ag+, Ni2+, Pd2+, Mn2+, Zn2+, Mg2+, and Pr3+). Such polymers could be used in various applications, including sensors and stimuli-responsive displays.     

Supramolecular assembly of H‐bonded side‐chain polymers containing conjugated pyridyl H‐acceptor pendants and various low‐band‐gap H‐donor dyes bearing cyanoacrylic acid groups for organic solar cell applications

Novel supramolecular side‐chain polymers were constructed by complexation of proton acceptor (H‐acceptor) polymers, i.e., side‐chain conjugated polymers P1–P2 containing pyridyl pendants, with low‐band‐gap proton donor (H‐donor) dyes S1–S4 (bearing terminal cyanoacrylic acids) in a proper molar ratio. Besides unique mesomorphic properties confirmed by DSC and XRD results, the H‐bonds of supramolecular side‐chain structures formed by pyridyl H‐acceptors and cyanoacrylic acid H‐donors were also confirmed by FTIR measurements. H‐donor dyes S1–S4 in solid films exhibited broad absorption peaks located in the range of 471–490 nm with optical band‐gaps of 1.99–2.14 eV. Furthermore, H‐bonded polymer complexes P1/S1–P1/S4 and P2/S1–P2/S4 exhibited broad absorption peaks in the range of 440–462 nm with optical band‐gaps of 2.11–2.25 eV. Under 100 mW/cm² of AM 1.5 white‐light illumination, the bulk heterojunction polymer solar cell (PSC) devices containing an active layer of H‐bonded polymer complexes P1/S1–P1/S4 and P2/S1–P2/S4 (as electron donors) mixed with [6,6]‐phenyl C₆₁ butyric acid methyl ester (i.e., PCBM, as an electron acceptor) in the weight ratio of 1:1 were investigated. The PSC device containing H‐bonded polymer complex P1/S3 mixed with PCBM (1:1 w/w) gave the best preliminary result with an overall power conversion efficiency (PCE) of 0.50%, a short‐circuit current of 3.17 mA/cm², an open‐circuit voltage of 0.47 V, and a fill factor of 34%. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5998–6013, 2009     

Conformational studies on peptides containing α,α-disubstituted α-amino acids: chiral cyclic α,α-disubstituted α-amino acid as an α-helical inducer

Four types of α,α-disubstituted amino acids {i.e., α-aminoisobutyric acid (Aib), 1-aminocyclopentanecarboxylic acid (Ac(5)c), (3S,4S)-1-amino-(3,4-dimethoxy)cyclopentanecarboxylic acid [(S,S)-Ac(5)c(dOM)] and its enantiomer (R,R)-Ac(5)c(dOM)} were introduced into l-leucine-based hexapeptides and nonapeptides. The dominant conformations of eight peptides: Cbz-(L-Leu-L-Leu-dAA)(2)-OMe [dAA = 1: Aib; 2: Ac(5)c; 3: (S,S)-Ac(5)c(dOM); 4: (R,R)-Ac(5)c(dOM)] and Boc-(L-Leu-L-Leu-dAA)(3)-OMe [dAA = 5: Aib; 6: Ac(5)c; 7: (S,S)-Ac(5)c(dOM); 8: (R,R)-Ac(5)c(dOM)], were investigated by IR, CD spectra and X-ray crystallographic analysis. The CD spectra revealed that Aib hexapeptide 1 and Ac(5)c hexapeptide 2 formed right-handed (P) 3(10)-helices, while Ac(5)c(dOM) hexapeptides 3 and 4 formed a mixture of (P) 3(10)- and α-helices. The Aib nonapeptide 5 formed a (P) 3(10)-helix, the Ac(5)c nonapeptide 6 formed a mixture of (P) 3(10)- and α-helices, and the Ac(5)c(dOM) nonapeptides 7 and 8 formed (P) α-helices. X-Ray crystallographic analysis revealed that the Aib hexapeptide 1 formed a (P) 3(10)-helix, while (S,S)-Ac(5)c(dOM) hexapeptide 3 formed a (P) α-helix. In addition, the Ac(5)c nonapeptide 6 and (R,R)-Ac(5)c(dOM) nonapeptide 8 formed (P) α-helices. The Aib and achiral Ac(5)c residues have the propensity to form 3(10)-helices in short peptides, whereas the chiral Ac(5)c(dOM) residues have a penchant for forming α-helices.     

Ion-specific swelling behaviors of partially quaternized poly(4-vinyl pyridine) gel

Swelling degrees of partially quaternized poly(4-vinyl pyridine) (p.q.P4VP) were measured as functions of the degree of quaternization (D.Q.: 5, 10, 15, 30, and 50 mol%), salt concentration (0–4 M), and salt species (KF, LiCl, NaCl, KCl, CsCl, MgCl₂, KBr, LiSCN, KSCN, Na₂SO₄, and MgSO₄) to study ion effects on the three kinds of interactions involved with p.q.P4VP in aqueous systems, i.e., electrostatic interaction, hydrogen bonding to the nitrogen of the pyridine ring, and hydrophobic interaction, as well as to estimate the relative contributions of the respective ion effects to gel swelling. Upon addition of salts at the lowest salt concentration studied (0.01 M), p.q.P4VP gels, except for one with D.Q.=10%, significantly deswelled depending on the counterion species; the lowest swelling degree was observed for the thiocyanates and the highest one for KF. In the higher salt concentration region (≧1 M) where electrostatic interactions might well be screened, however, some salt systems (e.g., LiCl, KSCN) showed swelling with increased salt concentration, contrary to the common behavior of usual ionic gels. These ion-specific swelling behaviors were interpreted as being caused by additive ionic effects on the three kinds of interactions.     

含苯胺低聚物侧链的导电共聚物的合成与性能研究

通过高分子反应合成了含有不同长度苯胺链段的聚甲基丙烯酸类接枝聚合物 ,研究结果发现 ,当苯胺链段达到一定长度时 ,经质子酸掺杂后的聚合物具有一定的电导性 ,其中 ,接枝苯胺八聚体的共聚物经质子酸掺杂后其电导率可以达到 10 - 5S cm .     

Preparation of Sorbents Containing Straetlingite Phase from Zeolitic By-Product and Their Performance for Ammonium Ion Removal

In this study, straetlingite-based sorbents were used for NH₄⁺ ion removal from a synthetic aqueous solution and from the wastewater of an open recirculation African catfish farming system. This study was performed using column experiments with four different filtration rates (2, 5, 10, and 15 mL/min). It was determined that breakthrough points and sorption capacity could be affected by several parameters such as flow rate and mineral composition of sorption materials. In the synthetic aqueous solution, NH₄⁺ removal reached the highest sorption capacity, i.e., 0.341 mg/g with the S30 sorbent at a filtration rate of 10 mL/min and an initial concentration of 10 mg/L of NH₄⁺ ions. It is important to emphasize that, in this case, the Ce/C0 ratio of 0.9 was not reached after 420 min of sorption. It was also determined that the NH₄⁺ sorption capacity was influenced by phosphorus. In the wastewater, the NH₄⁺ sorption capacity was almost seven times lower than that in the synthetic aqueous solution. However, it should be highlighted that the P sorption capacity reached 0.512 mg/g. According to these results, it can be concluded that straetlingite-based sorbents can be used for NH₄⁺ ion removal from a synthetic aqueous solution, as well as for both NH₄⁺ and P removal from industrial wastewater. In the wastewater, a significantly higher sorption capacity of the investigated sorbents was detected for P than for NH₄⁺.     

Studies on Novel Polymer Materials Prepared through Intermacromolecular Complexation

The basic feature of polymers is their multi-order structure. Structure change at each level offers a possibility tomodify polymer properties and to develop new polymer materials. Therefore,novel polymer materials can be developed by tailoring their chain structure through chemical bonding among atoms, i.e., via the traditional molecular chemistry methods, e.g., polymerization of new monomer, controlling chain length (molecular weight and molecular weight distribution) and stereoregularity, copolymerization of different kinds of monomers, controlling sequence distribution,block of graft length of copolymer, etc., which have been the focus of polymer chemistry for several decades, as well as by tailoring specific supramolecular architecture using molecules as building block through intermolecular interactions, i.e., via supramolecular science methods, e.g., molecular self-assembly, intermacromolecular complexation, etc., which is a modern and fast-developing academic research field.This paper reports novel polymer materials prepared through intermacromolecular complexation,e.g., a new polymer solid electrolyte poly(metyl methacrylate-methacrylic acid)[P(MMA-MAA)]/poly(ethylene oxide) (PEO)/A2-LiClO4 developed by intermacromolecular complexation through hydrogen bonding, which has enhanced ambient ionic conductivity and fairly good mechanical and film-forming properties, a new polymer microcomposite poly(acrylonitrile-acrylamide-acrylic acid) [P(AN-AM-AA)]/poly(vinyl alcohol) (PVA) reinforced by the twin molecular chain microfibrils formed through intermacromolecular complexation of P(AN-AM-AA) with PVA through hydrogen bonding, which exhibits much better mechanical properties than its constituents and could be used to manufacture PVA based complexed fibers with higher modulus and better dyeability, a new polymer flooding agent poly(acrylamide-acrylic acid)[P(AM-AA)]/poly(acrylamide- dimethyldiallylammonium chloride) [P(AM-DMDAAC)] developed by intermacromolecular complexation of the oppositely charged polyions through Coulomb forces,which shows much higher viscosity and better resistance to temperature, shear rate and salt than its constituents, and has potential application in enhanced oil recovery.