Surface modification of imide containing polymers I: Catalytic groups

This paper describes basic studies of the surface modification of polyimide covered wires for insulation of electrical machines. Drain-off of the impregnating resin during production should be reduced by introduction of surface catalytic groups. ¹H NMR kinetic analysis of aminolytic ring opening reaction of low molecular model compounds for polyimides showed very fast modification reactions. The catalytic effect of various functional groups on unsaturated polyester imide, acrylate and epoxy resins was investigated by DSC. Co(II)-catalysts and tertiary aliphatic amines proved highest activity for double bond containing systems and epoxy resins, respectively. Aminolytic treatment of Kapton^® slides was followed by ATR-IR spectroscopy. Plate-plate rheometer measurements of epoxy resins employing tertiary amine-treated Kapton^® slides proved significantly reduced gelling temperature.     

New glycidyl ester compounds containing a preformed imide ring—I

The synthesis of the new esterglycidyl compounds produced by condensation of bis-carboxyimides with a large excess of epichlorohydrin were reported. To define the optimal conditions of condensation the process with monofunctional compounds were studied at first. For all synthesis, yield and epoxide and chlorine contents were found. The structure of glycidyl esters was determined by elementary analysis, IR and ¹H and ¹³C NMR spectra. The physical properties were also defined.     

Thermally stable polymers based on bismaleimides containing amide,imide, and ester linkages

Seven new structurally different bismaleimides were synthesized and characterized by infrared and proton nuclear magnetic resonance spectroscopy. The chain of these polymer precursors was extended by incorporating amidized, imidized, and esterified 4-chloroformyl phthalic anhydride. The bismaleimides containing amide and imide linkages were prepared by a simple synthetic route based on the reaction of the monomaleamic acid derived from various aromatic diamines (1 mol) with 4-chloroformyl phthalic anhydride (0.5 mol) and subsequent cyclodehydration of the intermediate triamic acid. In addition, chain extended bismaleimides were prepared by reacting the monomaleamic acid derived from p-phenylenediamine with several dianhydrides such as p-phenylene bis(trimellitamide anhydride), p-phenylene bis(trimellitate anhydride), and bis-phenol A bis(trimellitate anhydride). The differential thermal analysis scans of bismaleimides showed exotherms at 221–304°C associated with their polymerization reactions. The thermogravimetric analysis traces of polymers did not show a weight loss up to 351–393 and 344–372°C in N₂ and air atmospheres, respectively. The anaerobic char yield of polymers at 800°C was 44–61%. These polymers can be used for fabrication of composites having improved properties.     

Novel sulfur containing polymers

Sulfur containing polymers were synthesized by the addition of thiols to alkenes and alkynes. Although the polymer formation is explained on the basis of a radical intermediate these processes show typical characteristics of step growth polymerizations. These reactions have been applied for the syntheses of telechelics.     

Surface modification of imide containing polymers II: Co-reactive groups

This paper describes basic studies of the surface modification of polyimide covered wires for insulation of electrical machines. By introduction of surface reactive groups mechanical interlocking during the curing step should improve the life cycle. Kinetic analysis of ring opening reactions by aminolysis of low molecular model compounds for polyimides proved fast modification reactions under mild conditions. The co-reactivity of various functional groups with unsaturated polyesterimide, acrylate and epoxy resins was investigated by DSC. Aminolytic treatment of Kapton^® sheets was followed by ATR-IR. Mandrel bend test of agglutinations of unmodified and amine-treated Kapton^® sheets with different resins proved successful bonding and significantly improved adhesion.     

Thermally resistant polymers containing the s-triazine ring

Aromatic dinitriles cyclize to form aromatic polymers containing the s-triazine ring. In this paper, these polymers are compared thermally with each other and with aromatic melamine polymers prepared via the aromatic diamine and cyanuric chloride. One perfluoroaromatic melamine polymer was prepared and compared with the other two types of polymers. The polymers (triazines and melamine) in which biphenyl was the backbone were increasingly stable up to 1000°C. in nitrogen. The triazine polymers as a group were the most stable. The perfluoroaromatic polymer was the most stable melamine up to 500°C. in air but was very unstable above 700°C.     

Low surface energy polymers and surface active block polymers. I. t-butylphenyl containing polymers

Two new monomers in the 2-oxazoline series were synthesized and polymerized. These were 2-[4-(t-butyl)phenyl]-2-oxazoline ( I ) and 2-[(3-(3,5-di-t-butyl)phenoxy)propyl]-2-oxazoline ( II ). The polymer from I crystallized readily during bulk polymerization and showed T_m at 592 K (319°C). After annealing, the polymer showed a critical surface tension of 23.2 dyn/cm. Polymer from II was amorphous; hence, annealing showed little effect on contact angles. Block polymers were made with I (Xn = 10) and ethyl oxazoline (Xn = 6,20,60). Very sharp molecular weight distributions were obtained. All samples crystallized when annealed. The block polymer was an effective emulsifier for emulsion polymerization of butyl acrylate at 0.1%.     

Heat-resistant polymers containing thianthrene analogs units. I. Polyimides

Polyimides that contained thianthrene and dibenzo-p-dioxins units were synthesized. The tricyclic fused rings were successfully incorporated by polymerizing the diamines of the units with aromatic tetracarboxylic dianhydrides. The resulting polyamic acids were converted to polyimides by thermal cyclodehydration. The influence of the tricyclic units on the properties of the polyimides has been investigated. Polyimides that contained dibenzo-p-dioxins (ODP) exhibited sufficient thermal stability but were insoluble even in concentrated sulfuric acid. The introduction of a methyl group did not produce an appreciable increase in solubility. Thianthrene polyimides were considerably less stable than the equivalent polymers derived from open-chain diamine, 4,4′-diaminodiphenyl sulfide but were partly soluble in acid solvents. The results are discussed in terms of packing the polymer molecules.     

Novel network polymers based on calixresorcinarenes

The novel network polymers 2a-2d based on calix[4]resorcinarene derivatives were obtained with yields 2a: 80%, 2b: 90%, 2c: 70%, 2d: 70%. Polymers 2a and 2b containing fragments of tetramethylcalix[4]resorcinarene or tetraphenylcalix[4]resorcinarene as a repeating units were synthesized by condensation cis-tetramethylcalix[4]resorcinarene or cis-tetraphenylcalix[4]resorcinarene with formaldehyde. Polymers 2c and 2d containing fragments of furylcalix[4]resorcinarene were obtained by condensation of formaldehyde with products of calix[4]resorcinarene and furfural interaction. The IR spectra and sorption properties of the polymers were researched. It is found out that 2a-2d can participate in the cation-exchange reaction.     

Polymers containing polyhedral borane rings I. Condensation polymers

The preparation and properties of a unique new class of polymers containing polyhedral borane cages as part of the backbone polymer chain are described. The synthesis of polyamides, polyesters, polyureas, and polyurethanes proceeds from suitably chosen B₁₀ and B₁₂ polyhedral borane dicarbonyls, diols, and diisocyanates by typical condensation polymer techniques. Each complementary monomer may be a borane compound, but more often higher molecular weight products are provided when one monomer is a conventional organic reagent such as an aromatic diisocyanate. The polyamides prepared from 1, 12-B₁₂H₁₀(CO)₂ and organic diamines were crystalline and soluble, but molecular weight were limited because the amidation reaction was reversible and/or the amide linkage could be split by nucleophilic attack by some solvents. The polyurethanes prepared from Na₂B₁₂H₁₀(OH)₂ and aromatic diisocyanates were high molecular weight and relatively more stable. Clear, colorless, tough films were prepared. These polymers were soluble in many polar solvents and exhibited typical polyelectrolyte behavior.     

Antimicrobial polymers containing melamine derivatives. I. Preparation and characterization of chloromelamine‐based cellulose

A reactive melamine derivative, 2‐amino‐4‐chloro‐6‐hydroxy‐s‐triazine (ACHT), was synthesized through the controlled hydrolysis of 2‐amino‐4,6‐dichloro‐s‐triazine. The reaction was characterized with Fourier transform infrared study and elemental analysis. ACHT could react with cotton cellulose at room temperature with a cold‐pad‐batch treatment process. Upon chlorination reactions, the amino group of covalently bound ACHT could be transformed into an N‐halamine structure, providing potent, durable, and rechargeable antimicrobial activities against both gram‐negative and gram‐positive bacteria. The chlorination mechanism and the structure–property relationship of the treated samples were further examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3818–3827, 2004     

New high-temperature polymers. II. Ordered aromatic copolyamides containing fused and multiple ring systems

Symmetrical diamines, containing preformed carbonamide linkages, were prepared by reacting nitrobenzoyl chlorides with aromatic diamines and reducing the dinitro intermediates. The diamines were polymerized with aromatic diacid chlorides to give wholly aromatic ordered copolyamides of exceptionally high thermal stability. Ordered diamines were prepared containing only phenylene units as the aromatic portion, and others containing phenylene and naphthylene or biphenylene groups. Low-temperature solution polymerization of these diamines with isophthaloyl chloride, 4,4′-bibenzoyl chloride, or 2,6-naphthalenedicarbonyl chloride, gave thirteen ordered copolyamides, each containing a naphthylene and/or biphenylene group in its repeating unit. Differential thermal analyses and thermogravimetric analyses showed these polymers to have melting points or decomposition temperatures of from 420 to over 500°C. Films of one of the polymers had a breakdown voltage of 3000 v./mil at 180°C. Fibers of the same composition had tenacities of up to 8 g/den.; a 5.5 g/den. sample retained 85% of its tenacity after 17 hr. at 300°C. and 21% after 9 days.     

Biodegradable polymers based on renewable resources. VII. Novel random and alternating copolycarbonates from 1,4:3,6‐dianhydrohexitols and aliphatic diols

Novel copolycarbonates containing 1,4:3,6‐dianhydro‐D ‐glucitol or 1,4:3,6‐dianhydro‐D ‐mannitol units, with various methylene chain lengths, were synthesized by bulk and solution polycondensations, of several combinations of carbonate‐modified sugar derivatives and aliphatic diols. Bulk polycondensations of 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(phenoxycarbonyl)‐D ‐glucitol or 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(phenoxycarbonyl)‐D ‐mannitol with four α,ω‐alkanediols having methylene chain lengths of 4, 6, 8, and 10, respectively, at 180 °C afforded the corresponding copolycarbonates with number‐average molecular weight (M_n) values up to 19.₂ × 10³. ¹³C NMR analysis disclosed that these polymers had scrambled structures in which the sugar carbonate and aliphatic carbonate moieties were nearly randomly distributed along a polymer chain. However, solution polycondensations between 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(p‐nitrophenoxycarbonyl)‐D ‐glucitol or 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(p‐nitrophenoxycarbonyl)‐D ‐mannitol, and the α,ω‐alkanediols in sulfolane or dimethyl sulfoxide at 60 °C gave well‐defined copolycarbonates having regular structures consisting of alternating sugar carbonate and aliphatic carbonate moieties with M_n values up to 33.₈ × 10³. Differential scanning calorimetry demonstrated that all the copolycarbonates were amorphous with glass‐transition temperatures ranging from 1 to 65 °C, which decreased with increasing lengths of the methylene chain of the aliphatic diols. Additionally, all the copolycarbonates were stable up to 310–330 °C as estimated by thermogravimetric analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2312–2321, 2003     

Different aliphatic acid controlled assembly of coordination polymers constructed from cobalt

Three new Co containing coordination polymers {Co₂(suc)₂(1,10′-phen)₂} _n (1), {Co₂(glu)₂(1,10′-phen)₂} _n (2), {Co(adip)(1,10′-phen)(H₂O)} _n (3), have been synthesized under the hydrothermal condition and characterized by elemental analysis, IR, TG analysis and single crystal X-ray diffraction. Complex 1 exhibits a novel two-dimensional layer framework, in which the bi-nuclear Co clusters are linked by succinic anions. Complex 2 has a one-dimensional chain-like structure. Complex 3 is also a one-dimensional chain-like structure, which is further connected by hydrogen bonds to generate a two-dimensional, layer-like structure. Furthermore, the thermal properties of the above three complexes are studied.     

Novel pH‐sensitive polymers containing sulfonamide groups

Novel pH‐sensitive polymers were synthesized by copolymerizing a monomer derivatized from 4‐amino‐N‐[4,6‐dimethyl‐2‐pyrimidinyl]benzene sulfonamide with N,N‐dimethylacrylamide. The linear copolymers showed pH‐sensitive solubility, while chemically crosslinked hydrogels exhibit a relatively sharp transition in swelling around physiological pH. These changes were found to be reversible. By varying the type of sulfonamide and the copolymer composition, a new class of pH‐sensitive polymers with a broad range of transition pH can be synthesized.     

Novel dihydrazone based polymers for electrophotography

The novel family of hole-transporting polymers containing hydrazone moieties is reported. The polymers were prepared in polyaddition reaction of dihydrazone-containing diepoxides with bifunctional nucleophilic linking agents in the presence of catalyst triethylamine. Obtained polymers were found to constitute novel polymeric hole transporting materials characterized by differential scanning calorimetry and time of flight method. The highest hole drift mobility in the newly synthesized polymers exceed 10⁻⁵ cm² V⁻¹ s⁻¹ at an electric field of 10⁶ V cm⁻¹.     

Functional monomers and polymers. XXXXVII. Complex formation of stereoregular methacryloyl-type polymers containing nucleic acid bases

The complex formation between a poly(N-β-methacryloyloxyethyl) derivative of adenine with one of thymine or uracil was studied in dimethyl sulfoxide and ethylene glycol mixture by ultraviolet (UV) spectroscopy. For the polymer pairs containing complementary nucleic acid bases both hypochromicity and hyperchromicity were found. Stereoregularity of the polymers, as well as the conditions for measurement of, for example, solvent, temperature, and time, affected the complex formation. Both inter- and intramolecular interaction of polymers in solution were discussed in some detail.     

Side-chain liquid crystalline polymers with silphenylene-siloxane main chains. I. Synthesis of silphenylene-siloxane polymers containing hydrosilane units

Siophenylene-siloxane polymers with repeating units containing hydrosilane, SiH, groups were synthesized for use as backbone polymers in side-chain liquid crystalline polymers. The polymerization of 1,4-bis (hydroxydimethylsilyl) benzene with a bis (Pyrrolidinyl) silane monomer formed a crosslinked polymer during the course of the reaction, while the use of a bis (ureido) silane monomer gave a polymer which crosslinked on storage after preparation. However, a soluble polymer could be prepared successfully by using a dichlorosilane as the comonomer. Polymers containing two and three Si? H groups in each unit were prepared by the last method. All Soluble polymers were characterized by gel permeation chromatography (GPC), infrared spectroscopy (IR) multinuclear NMR spectroscopy, and differential scanning calorimetry (DSC).     

Novel structural analogs of glyphosate based on azoles. 1. Synthesis of 1H-imidazoles containing carboxyl and phosphoryl groups in the ring

A general method has been developed for the synthesis of 1H-imidazoles containing a phosphoryl group in positions 2 or 4(5) based on lithium intermediates. The possibility of further functionalization of the ring using electrophiles has also been demonstrated.