Stereoregularity of poly(methyl acrylate)

The stereoregularity of poly(methyl acrylate) and poly(methyl acrylate-αd) was determined from the NMR spectra. A method of quantitative determination of stereoregularity of poly(methyl acrylate) proposed in this paper is based on the fact that in the 100 Mc./sec. NMR spectrum the absorption peaks due to methylene protons in syndiotactic configurations overlap absorptions due to only one of two methylene protons in isotactic configurations. The stereostructure of poly(methy1 acrylates) polymerized with anionic catalysts such as Grignard reagents, n-butyllithium, and LiAlH₄ is generally richer in isotactic diads than in syndiotactic diads. For example, poly(methyl acrylate) polymerized with phenylmagnesium bromide as catalyst at ?20°C. consists of 99% isotactic and 1% syndiotactic diads. In radical polymerization, the isotacticity of poly(methyl acrylate) is independent of polymerization temperature. Poly(methyl acrylates) polymerized with a Ziegler-Natta catalyst consisting of Al(C₂H₅)₂Cl and VCl₄ have configurations similar to those polymerized by radical initiators. The stereoregularity of poly(methyl acrylate-α-d) resembled that of poly(methyl acrylate) polymerized under the same conditions.     

Stereoregularity of poly(isopropyl acrylate) and its racemization during hydrolysis

The diad tacticity of poly(isopropyl acrylate) was measured from the β-proton absorptions of poly(isopropyl acrylate-α,β-d₂) obtained with a 100 MHz NMR spectrometer, and temperature dependence of the tacticity of the polymers obtained by radical polymerization was determined. Enthalpy and entropy differences between isotactic and syndiotactic addition for poly(isopropyl acrylate) were calculated to give the following values: Δ(ΔS) = 0.7 eu; Δ(ΔH) = 0.51 kcal/mole. In the hydrolysis of poly(isopropyl acrylate-α,β-d₂), it was found that the rate of hydrolysis of poly(isopropyl acrylate) was dependent on the molecular weight rather than on the tacticity. As for the rate of racemization during hydrolysis, the rate for syndiotactic polymer was much faster than that for the isotactic polymer. The exchange reaction of deuterium at α-position with hydrogen occurred in all the polymers during hydrolysis reaction.     

New initiator system for the anionic polymerization of (meth)acrylates in toluene. IV. Random copolymerization of (meth)acrylates in toluene initiated by s-BuLi ligated by lithium silanolates

Copolymerization of binary mixtures of alkyl (meth)acrylates has been initiated in toluene by a mixed complex of lithium silanolate  (s-BuMe₂SiOLi) and s-BuLi (molar ratio > 21) formed in situ by reaction of s-BuLi with hexamethylcyclotrisiloxane (D₃). Fully acrylate and methacrylate copolymers, i.e., poly(methyl acrylate-co-n-butyl acrylate), poly(methyl methacrylate-co-ethyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate) of a rather narrow molecular weight distribution have been synthesized. However, copolymerization of alkyl acrylate and methyl methacrylate pairs has completely failed, leading to the selective formation of homopoly(acrylate). As result of the isotactic stereoregulation of the alkyl methacrylate polymerization by the s-BuLi/s-BuMe₂SiOLi initiator, highly isotactic random and block copolymers of (alkyl) methacrylates have been prepared and their thermal behavior analyzed. The structure of isotactic poly(ethyl methacrylate-co-methyl methacrylate) copolymers has been analyzed in more detail by Nuclear Magnetic Resonance (NMR). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2525–2535, 1999     

Stereoregularity of poly(2-vinylpyridine) determined by 1H-NMR and 13C-NMR spectroscopy

In order to determine the stereoregularity of poly(2-vinylpyridine), 2-vinylpyridine-β,β-d₂ was synthesized. The ¹H-NMR spectra of the deuterated polymer in D₂SO₄ and o-dichlorobenzene solutions showed three peaks, which were assigned to triad tacticities. Since the absorptions of heterotactic and syndiotactic triads of methine protons overlap those of methylene protons in nondeuterated polymers, only isotactic triad intensities can be obtained from the ¹H-NMR spectra of nondeuterated poly(2-vinylpyridine). The ¹³C-NMR spectra of poly(2-vinylpyridine) were obtained in methanol and sulfuric acid solutions. In methanol solution the absorption was split into three groups, which cannot be explained by triads, and in sulfuric acid solution several peaks were observed. These splittings may be due to pentad tacticity. The results show that poly(2-vinylpyridine) obtained by radical polymerization is an atactic polymer.     

Stereoregularity of poly(2-vinylpyridine) and poly-(4-vinylpyridine)

In order to determine the stereoregularity of poly(4-vinylpyridine), 4-vinylpyridine-β,β-d₂ was synthesized from 4-acetylpyridine. The ¹H-NMR spectra of the deuterated and nondeuterated polymers were measured and analyzed. From the ¹H-NMR spectra of poly(4-vinylpyridine-β,β-d₂), triad tacticity can be obtained, while the ¹H-NMR spectra of nondeuterated poly(4-vinylpyridine) give the fraction of isotactic triad. The ¹³C-NMR spectra of poly(4-vinylpyridine) were also observed, and the spectra of C₄ carbon of polymers were assigned by the pentad tacticities. The fraction of isotactic triad of poly(2-vinylpyridine) and poly(4-vinylpyridine) obtained under various polymerization conditions were determined. The radical polymerization and anionic polymerizations with phenylmagnesium bromide and n-butyllithium as catalysts of 4-vinylpyridine gave atactic polymers.     

Stereospecific polymerization of benzyl α-(alkoxymethyl) acrylates

α-(Alkoxymethyl) acrylates, such as methyl α-(phenoxymethyl) acrylate, benzyl α-(methoxymethyl)acrylate (BMMA), benzyl α-(benzyloxymethyl)acrylate, and benzyl α-(tert-butoxymethyl)acrylate, were synthesized, and their polymerizability and the stereoregularity of the polymers obtained by radical and anionic methods were investigated. The radically obtained polymers were found to be atactic by ¹³C- and ¹H-NMR analyses, but the polymers obtained with lithium reagents in toluene at −78°C were highly isotactic. Further, it is noteworthy that isotactic polymers were also produced with lithium reagents even in tetrahydrofuran. Effects of polymerization temperature and counter cation on stereoregularity were clearly observed in the polymerization of BMMA, and a potassium reagent afforded an almost atactic polymer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 721–726, 1997     

The stereoregularity of polyacrylonitrile and its dependence on polymerization temperature

The stereoregularity of polyacrylonitrile was studied by NMR spectroscopy. The methylene protons in isotactic configuration are equivalent in dimethylformamide-d₇ solution and are nonequivalent in dimethylsulfoxide-d₆ solution. In the case of the latter solution the difference in chemical shift between the isotactic methylene protons is 6.6 cps. The stereoregularity of polyacrylonitrile-α-d instead of polyacrylonitrile was determined on the dimethylformamide-d₇ solution. In the radical polymerization all the polyacrylonitrile-α-d's that polymerized at temperatures between 80 and ?78°C. have a configuration consisting of about 50% of isotactic diads and, accordingly, the stereoregularity of polyacrylonitrile does not depend upon the polymerization temperature. Analysis of the NMR spectra of isotactic polyacrylonitrile prepared from acrylonitrile–urea canal complex was also carried out. The NMR spectra of meso- and dl-2,4-dicyanopentanes, dimer models of isotactic and syndiotactic polyacrylonitriles, respectively, were analyzed by a computer program proposed by Bothner-By.     

Thermal degradation of poly(alkyl acrylates). I. Preliminary investigations

A qualitative survey of the thermal degradation reactions which occur in poly(ethyl acrylate), poly(n-propyl acrylate), poly(isopropyl acrylate), poly(n-butyl acrylate) and poly(2-ethylhexyl acrylate) has been made by using three thermal analytical methods: thermogravimetric analysis (TGA), thermal volatilization analysis (TVA), and the dynamic molecular still (DMS), all combined with infrared and mass spectrometry. Degradation in poly(isopropyl acrylate), which is a secondary ester, becomes discernible at 260°C and proceeds in two stages. The other four polymers, which are all primary esters, are more stable. They degrade in a single-stage process starting at 300°C. The principal volatile products from the primary esters are carbon dioxide and the olefin and alcohol corresponding to the alkyl group. A roughly equivalent quantity of short-chain fragments is also formed. From poly(isopropyl acrylate), carbon dioxide and propylene are the only volatile products in the first phase of the reaction.     

Poly(Alkyl Glycidate Carbonate)s as Degradable Pressure‐Sensitive Adhesives

Insertion of CO₂ into the polyacrylate backbone, forming poly(carbonate) analogues, provides an environmentally friendly and biocompatible alternative. The synthesis of five poly(carbonate) analogues of poly(methyl acrylate), poly(ethyl acrylate), and poly(butyl acrylate) is described. The polymers are prepared using the salen cobalt(III) complex catalyzed copolymerization of CO₂ and a derivatized oxirane. All the carbonate analogues possess higher glass‐transition temperatures (T_g=32 to ?5 °C) than alkyl acrylates (T_g=10 to ?50 °C), however, the carbonate analogues (T_d≈230 °C) undergo thermal decomposition at lower temperatures than their acrylate counterparts (T_d≈380 °C). The poly(alkyl carbonates) exhibit compositional‐dependent adhesivity. The poly(carbonate) analogues degrade into glycerol, alcohol, and CO₂ in a time‐ and pH‐dependent manner with the rate of degradation accelerated at higher pH conditions, in contrast to poly(acrylate)s.     

Synthesis and characterization of graft copolymers of poly(vinyl chloride) with styrene and (meth)acrylates by atom transfer radical polymerization

Graft copolymers of poly(vinyl chloride) with styrene and (meth)acrylates were prepared by atom transfer radical polymerization. Poly(vinyl chloride) containing small amount of pendent chloroacetate units was used as a macroinitiator. The formation of the graft copolymer was confirmed with size exclusion chromatography (SEC), ¹H NMR and IR spectroscopy. The graft copolymers with increasing incorporation of butyl acrylate result in an increase of molecular weight. One glass transition temperature (T_g) was observed for all copolymers. T_g of the copolymer with butyl acrylate decreases with increasing content of butyl acrylate.     

Stereoregularity of poly(methyl α-chloroacrylate)

Triad and tetrad tacticities of poly(methyl α-chloroacrylate) and poly(methyl α-chloroacrylate-β-d₁) were determined by nuclear magnetic resonance (NMR) spectroscopy. Methyl α-chloroacrylate-β-d₁ and its polymer were first synthesized. Isotactic poly(methyl α-chloroacrylate) was prepared with ethylmagnesium chloride-benzal-acetophenone in combination as catalyst. The syndiotacticity of radically polymerized polymers increased with decreasing polymerization temperature. For radical polymerization, enthalpy and entropy differences between isotactic and syndiotactic additions were calculated to give ΔH ? ΔH = 850 cal/mole and ΔS ? ΔS = 0.93 eu. The stereoregularity of the polymer prepared with phenylmagnesium bromide catalyst was analyzed in fairly good agreement with first-order Markov statistics, while polymerization with fluorenyllithium seems predominantly to proceed by a mechanism similar to free-radical mechanism. Stereoregularity-controlling power for individual substituents is briefly discussed.     

Preparation and (13C)NMR spectroscopy of stereoregular poly(methacrylic acid)

Several procedures for synthesis of stereoregular poly(methacrylic acid) have been examined and the polymer characterized by (¹³C)NMR. Using d⁶ DMSO as solvent for spectroscopy gives better spectra than those previously obtained using aqueous solutions and stereochemical splittings can be resolved in the methyl signals. Free-radical polymerization in toluene solution is a Bernouilli process giving mainly heterotactic/syndiotactic polymer. Polymers produced with free-radical initiation in aqueous solution have a higher, and pH dependent, content of syndiotactic triads. A previously described procedure for producing regular polymers by hydrolysis of poly(trimethylsilyl methacrylate) requires modification to produce isotactic contents of above 90% and does not give truly syndiotactic polymer. In contrast, polymerization with γ-radiation can produce polymers with close to 90% of syndiotactic triads.     

Vibrational spectra and normal coordinate analysis of isotactic poly(alkyl ethylene)s. I. Modification I of poly(ethyl ethylene) and its deuterated derivatives

A new calculation of the vibrational frequencies of poly(ethy1 ethylene) based on the actual molecular geometry was performed. The calculation takes into account new experimental data such far-infrared spectra and Raman spectra of the stretched polymer, infrared spectra of poly(ethyl ethylene)-(2,2;d₂) (P-4-1-d₂) and poly(ethyl ethylene)-(3,3,4,4;d₄) (P-4-1-d₄), and Raman spectra of poly(ethyl ethylene)-(1,3,3;d₃) and poly(ethyl ethylene)-(3,3,4,4;d₄). Refinement produced a set of force constants; it is also applicable to poly(propyl ethylene).     

The structure of chlorinated poly(vinyl chloride). VI. Comparison of the chlorination of poly(vinyl chloride) and β,β-d2-poly(vinyl chloride) with 1H-NMR and 13C-NMR spectroscopy

Samples of chlorinated poly(vinyl chloride) (CPVC) and chlorinated β,β-dideuterated poly(vinyl chloride) (β,β-d₂-CPVC) were prepared under identical reaction conditions. The microstructure of CPVC and β,β-d₂-(CPVC) was characterized by a combination of ¹H-NMR, ¹³C-NMR spectroscopy, and analytically determined chlorine content. A difference was observed in the reaction rates of chlorination of PVC and β,β-d₂-PVC, and, in their thermal chlorination in solution, also in the structure of the chlorinated products. It was proved that in the chlorination of β,β-d₂-PVC a new chlorine atom can also enter the original? CHCl? group. The results are discussed from the standpoint of the chlorination mechanism.     

Triad tacticity of polyacrylonitrile

The high-resolution NMR spectra of polyacrylonitrile-β,β-d₂ prepared by radical polymerization were determined, and the stereoregularity of the polymer was studied. The NMR spectra of methine protons of polyacrylonitrile-β,β-d₂ in dimethyl sulfoxide-d₆ and a mixture of nitromethane-d₃ and ethylene carbonate showed three partially resolved multiplets. The deuterium-decoupled spectra of the polymer were measured, and three well resolved peaks were observed in the two solvents and dimethylformamide-d₇. These three peaks were analyzed by comparison with the NMR spectra of model compounds and polyacrylonitrile-α-d, and they were assigned to isotactic, heterotactic, and syndiotactic triads with decreasing magnetic field. This order seems to be unchanged in other solvents. Triad stereoregularity of the polymer was determined according to the assignment. Polymerizations of acrylonitrile-β,β-d₂ by radical initiators between ?78°C and 60°C were explained by the Bernoulli trial propagation step. The polymers had an atactic structure, independent of polymerization temperature. This shows that in free-radical polymerization of acrylonitrile, the chain end is not represented as having any particular stereochemistry. Other stereochemical control is necessary to produce tactic polymers. The triad tacticity of isotactic polyacrylonitrile was also determined.     

Stereoregularity of poly(vinyl ether)

α-Methylvinyl isobutyl and methyl ethers were polymerized cationically and the structure of the polymers was studied by NMR. Poly(α-methylvinyl methyl ether) polymerized with iodine or ferric chloride as catalyst was found to be almost atactic, whereas poly(α-methylvinyl isobutyl ether) polymerized in toluene with BF₃OEt₂ or AlEt₂Cl as catalyst was found to be isotactic. In both cases, the addition of polar solvent resulted in the increase of syndiotactic structure as is the case with polymerization of alkyl vinyl ether. tert-Butyl vinyl ether was polymerized, and the polymer was converted into poly(vinyl acetate), the structure of which was studied by NMR. A nearly linear relationship between the optical density ratio D₇₂₂/D₇₃₆ in poly(tert-butyl vinyl ether) and the isotacticity of the converted poly(vinyl acetate) was observed.     

Stereoregularity of poly(alkyl α-chloroacrylates) and mechanism of isotactic polymerization

The catalytic activity of the complexes prepared by the reaction of Grignard reagents with ketones, esters, and an epoxide as polymerization catalysts of methyl and ethyl α-chloroacrylates was investigated. The modifiers which gave isotactic polymers were α,β-unsaturated ketones such as benzalacetophenone, benzalacetone, dibenzalacetone, mesityl oxide, and methyl vinyl ketone, and α,β-unsaturated esters such as ethyl cinnamate, ethyl crotonate, and methyl acrylate. Catalysts with butyl ethyl ketone, propiophenone, and propylene oxide as modifiers produced atactic polymers but no isotactic polymers. It was revealed that the complex catalysts having a structure ? C?C? O? MgX (X is halogen) gave isotactic polymers. The mechanism of isotactic polymerization was discussed. In addition, for radical polymerization of ethyl α-chloroacrylate, enthalpy and entropy differences between isotactic and syndiotactic additions were calculated to give ΔH_i^* ? ΔH_s^* = 910 cal/mole and ΔS_i^* ? ΔS_s^* = 0.82 eu.     

Water and polymer dynamics in poly(hydroxyl ethyl acrylate-co-ethyl acrylate) copolymer hydrogels

Water and polymer dynamics in hydrogels based on random copolymers of hydrophilic poly(hydroxyl ethyl acrylate) (PHEA) and hydrophobic poly(ethyl acrylate) (PEA), in wide ranges of composition, were investigated by means of two dielectric techniques, thermally stimulated depolarization currents (TSDC) and, mainly, broadband dielectric relaxation spectroscopy (DRS) at several levels of relative humidity/water content. Water sorption of the hydrogels was studied by equilibrium sorption isotherms (ESI). Two secondary relaxations (γ and β_sw) and the primary (segmental) α relaxation associated with the glass transition of the copolymer matrix were followed and analyzed against copolymer composition and water content. The results show that the copolymers are homogeneous at nm scale, except at very high PEA content. Correlations were observed between results on the organization of water in the hydrogels and on water effects on polymer dynamics. Distinct changes in the dielectric response, in particular in the time scale and the dielectric strength of the β_sw relaxation, at the water content of the completion of the first hydration layer indicate that water molecules themselves contribute to the dielectric response at higher water contents. Proton conductivity of the hydrogels at various levels of water content was also studied and correlation to segmental dynamics (decoupling) was analyzed.     

Structure of chlorinated poly(vinyl chloride). V. Molecular parameters of chlorinated poly(vinyl chloride)

The molecular parameters of samples of chlorinated poly(vinyl chloride) (CPVC) and chlorinated β,β-dideuterated poly(vinyl chloride) (β,β-d₂-CPVC) were determined by gel permeation chromatography (GPC), light scattering, osmometry, and viscometry. Comparison of GPC, light scattering, osmometric, and viscometric data resulted in a discussion of the possibility of degradation and the causes of changes in the solution properties in chlorination of PVC and ββ-dideuterated poly(vinyl chloride) (ββ-d₂-PVC). The results obtained are discussed in relation to the mechanism of chlorination of PVC.     

Studies of polylactone/poly(vinyl chloride), polylactone/poly(vinyl fluoride), and polylactone/poly(vinylidene fluoride) blends

It is shown that polyvalerolactone/poly(vinyl chloride) (PVL/PVC) blends are miscible over all compositions since a single glass transition temperature T_g is observed, intermediate between those of pure PVL and pure PVC. Melting points, enthalpies of fusion and morphologies of PVL/PVC blends are also reported. It is also shown that polyvalerolactone, poly(α-methyl-α-n-propyl-β-propiolactone), poly(α-methyl-α-ethyl-β-propiolactone), and poly(caprolactone) are immiscible with poly(vinyl fluoride) and poly(vinylidene fluoride), despite the fact that all these polylactones are miscible with PVC. Differences in electronegativity, in atomic radius, and in molar attraction between the fluoride and the chlorine atoms are probably responsible for this difference in behavior.