Palladium–cadmium sulfide nanopowder at oil–water interface as an effective catalyst for Suzuki–Miyaura reactions

A simple and effective strategy is described for the synthesis of Pd–CdS nanopowder by the reduction of an organopalladium(II) complex, [PdCl₂(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene), in the presence of CdS quantum dots (QDs) at a toluene–water interface. We investigated the impact of addition of CdS QDs on catalytic activity of Pd nanoparticles (NPs). The Pd–CdS nanopowder functions as an efficient catalyst for Suzuki–Miyaura reactions for the formation of carbon–carbon bonds. There is a high electron density on Pd NPs and due to their high electron affinity they behave as an electron scavenger from CdS increasing the rate of oxidative addition, which is the rate‐determining step of the catalytic cycle, and, just as we expect, the C─C coupling reaction with the Pd–CdS nanopowder is faster and occurs in less time than that with Pd nanocatalysts. Compared to classical reactions, this method consistently has the advantages of short reaction times, high yields in a green solvent, reusability of the catalyst without considerable loss of catalytic activity and low cost, and is a facile method for the preparation of the catalyst.     

Adsorption of toluene-soluble polymers at the toluene–water interface

The adsorption of several toluene-soluble polymers at the toluene–water interface has been investigated by using the duNouy ring method of measuring interfacial tension γT /W . Polystyrene and poly(ethylene-co-vinyl acetate) (11.1 mole-% vinyl acetate) have little affinity for this interface at 29°C, but poly(methyl methacrylate) (PMMA) (M?_n = 420,000) and ethyl cellulose (EC) (M?_n = 50,100; 49.1% ethoxyl) adsorb significantly at concentrations as low as 1.0 × 10^?4 g/100ml. A plot of interfacial tension lowering versus initial logarithm of initial bulk phase polymer concentration is linear from 1.0 × 10^?4 to 1.0 × 10^?1 g/100 ml for EC and 1.0 × 10^?4 to 1.0 × 10^?2 g/100 ml for PMMA. When the PMMA concentration increases to 1.15 × 10^?1 g/100 ml, its adsorption behavior changes markedly. Prolonged time effects occur and adsorption becomes dependent upon dissolved water content of the toluene prior to formation of the toluene/water interface. Such effects are not observed with the other solutions studied. Increasing temperatures have variable effects on values of γT /W for the polymer solutions studied. Experiments with various polymer mixtures indicate that the polymer lowering T /W the most is preferentially adsorbed at the toluene–water interface and rapidly displaces less strongly adsorbed polymers.     

Improving description of hydrogen bonds at the semiempirical level: water–water interactions as test case

Hydrogen bonding is not well described by available semiempirical theories. This is an important restriction because hydrogen bonds represent a key feature in many chemical and biochemical processes, besides being responsible for the singular properties of water. In this study, we describe a possible solution to this problem. The basic idea is to replace the nonphysical gaussian correction functions (GCF) appearing in the core–core repulsion terms of most MNDO‐based semiempirical methods by a simple function exhibiting the correct physical behavior in the whole range of intermolecular separation distances. The parameterized interaction function (PIF) is the sum of atom‐pair contributions, each one having five adjustable parameters. In this work, the approach is used to study water–water interactions. The parameters are optimized to reproduce a reference ab initio intermolecular energy surface for the water–water dimer obtained at the MP2/aug‐cc‐pVQZ level. OO, OH, and HH parameters are reported for the PM3 method. The results of PM3‐PIF calculations remarkably improve qualitatively and quantitatively those obtained at the standard PM3 level, both for water–dimer properties and for water clusters up to the hexamer. For example, the root‐mean‐square deviation of the PM3‐PIF interaction energies, with respect to ab initio values obtained using 700 points of the water dimer surface, is only 0.47 kcal/mol. This value is much smaller than that obtained using the standard PM3 method (4.2 kcal/mol). The PM3‐PIF water dimer energy minimum (−5.0 kcal/mol) is also much closer to ab initio data (−5.0±0.01 kcal/mol) than PM3 (−3.50 kcal/mol). The method is therefore promising for the development of new semiempirical approaches as well as for application of combined quantum mechanics and molecular mechanics techniques to investigate chemical processes in water. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 572–581, 2000     

Phase transitions in segmented polyesterurethane–DMSO–water systems

The phase separation processes occurring in polyurethane/DMSO/water mixtures were studied using DSC and cloud point measurements. It is demonstrated that liquid–liquid demixing occurs in ternary solutions of segmented polyesterurethanes at sufficiently high water concentrations. It is also shown that the hard segment can crystallize from solution when cooled to room temperature; while if the mixture is cooled to sufficiently low temperatures, DMSO partially freezes, which also induces crystallization of the soft segment. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 716–723, 2005     

Measurement and prediction of solubilities and diffusion coefficients of carbon dioxide in starch–water mixtures at elevated pressures

The solubility and diffusion coefficient of carbon dioxide in intermediate‐moisture starch–water mixtures were determined both experimentally and theoretically at elevated pressures up to 16 MPa at 50 °C. A high‐pressure decay sorption system was assembled to measure the equilibrium CO₂ mass uptake by the starch–water system. The experimentally measured solubilities accounted for the estimated swollen volume by Sanchez–Lacombe equation of state (S‐L EOS) were found to increase almost linearly with pressure, yielding 4.0 g CO₂/g starch–water system at 16 MPa. Moreover, CO₂ solubilities above 5 MPa displayed a solubility increase, which was not contributed by the water fraction in the starch–water mixture. The solubilities, however, showed no dependence on the degree of gelatinization (DG) of starch. The diffusion coefficient of CO₂ was found to increase with concentration of dissolved CO₂, which is pressure‐dependent, and decrease with increasing DG in the range of 50–100%. A free‐volume‐based diffusion model proposed by Areerat was employed to predict the CO₂ diffusivity in terms of pressure, temperature, and the concentration of dissolved CO₂. S‐L EOS was once more used to determine the specific free volume of the mixture system. The predicted diffusion coefficients showed to correlate well with the measured values for all starch–water mixtures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 607–621, 2006     

Determination of phthalate esters in bottled water using dispersive liquid–liquid microextraction coupled with GC–MS

Dispersive liquid–liquid microextraction method was developed for the determination of the amount of phthalate esters in bottled drinking water samples and dispersive liquid–liquid microextraction samples were analyzed by GC–MS. Various experimental conditions influencing the extraction were optimized. Under the optimized conditions, very good linearity was observed for all analytes in a range between 0.05 and 150 μg/L with coefficient of determination (R²) between 0.995 and 0.999. The LODs based on S/N = 3 were 0.005–0.22 μg/L. The reproducibility of dispersive liquid–liquid microextraction was evaluated. The RSDs were 1.3–5.2% (n = 3). The concentrations of phthalates were determined in bottled samples available in half shell. To understand the leaching profile of these phthalates from bottled water, bottles were exposed to direct sunlight during summer (temperature from 34–57°C) and sampled at different intervals. Result showed that the proposed dispersive liquid–liquid microextraction is suitable for rapid determination of phthalates in bottled water and di‐n‐butyl, butyl benzyl, and bis‐2‐ethylhexyl phthalate compounds leaching from bottles up to 36 h. Thereafter, degradation of phthalates was observed.     

Comparative study on formamide–water complex

The hydrogen bonding of 1:1 complexes formed between formamide and water molecule have been investigated systematically using Hartree–Fock (HF), hybrid density functional theory (B3LYP), and post‐Hartree–Fock (MP2 and CCSD(T)) methods with range of basis sets 6‐31G(d), cc‐pVXZ (X = D, T, Q) and aug‐cc‐pVYZ (Y = D, T). Three stable structures are considered on the potential energy surface of formamide and water system. The optimized geometric parameters and interaction energies for various isomers at different levels are estimated. The IR frequencies, intensities, and frequency shifts are reported. This study shows that B3LYP/aug‐cc‐pVDZ method gives better performance for formamide‐water complexes. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010.     

Polymerization of acrolein and methyl vinyl ketone induced by amine–water and pyridine–phenol systems

It was reported that acrolein (AL) in tetrahydrofuran (THF) polymerizes at temperatures below 0°C in the presence of pyridine (Py) and water. To clarify this polymerization mechanism the polymerization of AL and methyl vinyl ketone (MVK) by an initiation system such as Py–water, triethylamine (Et₃N)–water, or Py–phenol(Ph) was carried out. The polymerization rate (R_p) of MVK in the Et₃N–water system was expressed by the same equation, R_p = k [Et₃N] [H₂O] [MVK]², used for AL in the Py–water system. Meanwhile, β-hydroxypropionaldehyde, β-phenoxypropionaldehyde, γ-ketobutanol, and β-phenoxy-1-methylpropionketone were obtained as the initial addition products. The polymer of AL obtained was composed of polymer units of vinyl and aldehyde polymerization, but the structure of MVK polymer obtained by the Py–water system was composed of only vinyl polymerization units. The polymerization of MVK by the Py–Ph system did not occur, however. These results were discussed in terms of the initiation and propagation mechanisms.     

Coupled solid phase extraction–supercritical fluid extraction–on-line gas chromatography of explosives from water

A method has been developed for the quantitative extraction of nitrotoluenes (2,3-dinitrotoluene, 2,4-dinitrotoluene and trinitrotolugene) from water using a Bakerbond^TM phenyl sorbent. The average solid phase extraction recoveries for spiked standards ranged from 80 to 95 percent for reagent water and 52 to 95 percent from well and surface water in the low ppb and ppt levels. After the nitrotoluenes had been trapped on the solid sorbent they were quantitatively eluted using SFE. Adding toluene to the extraction cell increased the rate of extraction, but did not improve analyte recovery versus unmodified CO₂. The extracts were analyzed off-line with GC–ECD using an internal standard. Extraction losses were due to analyte breakthrough, and not from poor SFE recoveries. This demonstrates that supercritical fluid extraction is a suitable elution technique for analytes trapped on solid phase extraction sorbents. Also, a method for the direct on-line coupling of SPE to GC, using SFE, has been developed and evaluated. Supercritical CO₂ is ideal for directly coupling SPE to GC, since carbon dioxide is a gas under ambient conditions. One potential problem of on-line SPE–SFE–GC is the presence of residual water trapped on the active sites of the Bakerbond¹³ phenyl sorbent. This problem was dealt with by using a split interface previously described by Hawthorne. From the results of this study, the relative standard deviation of the on-line SPE–SFE–GC interface was determined to be between 4 and 10 percent. In addition, there was no significant difference in the precision of the method with or without the use of an internal standard. A calibration curve was also constructed (r² = 0.995) from spiked controls, demonstrating that the method is quantitative.     

In situ PM‐IRRAS studies of organothiols and organosilane monolayers–ZnO interfaces at high water activities

In situ photoelastic‐modulated Fourier transform infrared reflection absorption spectroscopy has been applied for the investigation of interfacial stability of organothiol and organosilane monolayer films on nanocrystalline zinc oxide thin films. It has been shown that for octadecyltriethoxysilane films, exposure to high water activities results in physisorption of water in the cross‐linked film. This high water activity at the interface leads to a reversible wet de‐adhesion of the interfacial silanol groups from the ZnO surface. However, the organothiol seems to form a denser monolayer and a stable by S–Zn bond that is resistant to the competition with adsorbed water. The reversible attachment for cross‐linked organosilanol films has been demonstrated for the first time by means of an in situ spectroscopic method on model ZnO surfaces. Copyright © 2016 John Wiley & Sons, Ltd.     

Particle monolayer formation at the air–water interface by silica particle with well‐defined grafted polymer

Particle monolayer formation at the air–water interface by polymer‐grafted colloidal silica was investigated. Methyl methacrylate (MMA) was polymerized from initiative bromide groups at colloidal silica surface by atom transfer radical polymerization. We obtained polymer‐grafted silica particle (SiO₂‐PMMA) with relative narrow polydispersity of PMMA. For the polymer‐grafted particle with high graft density, particle monolayer formation was confirmed by π‐A isotherm measurement and SEM observation. Interparticle distance was controllable by surface pressure. Furthermore, grafted polymer chains were suggested to be fairly extended at the air–water interface. However, for the polymer‐grafted particle with low graft density, monolayer structure on substrate showed aggregation and voids. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2789–2797, 2006     

Extraction of organophosphorus pesticides in water and juice using ultrasound‐assisted emulsification–mixroextraction

In this study, a microextraction method termed as ultrasound‐assisted emulsification–microextraction (USAEME) has been developed for the extraction of organophosphorus pesticides (OPPs) in water and orange juice samples. In the USAEME method, aliquots of 50 μL chlorobenzene used as extraction solvent was added to 10 mL water sample in a conical glass centrifugal tube. Factors influencing the USAEME extraction efficiency such as sonication time, extraction solvent, extraction volume and salt addition were evaluated. Under the optimum conditions, enrichment factors ranged from 241 to 311, LOD varied from 5.3 to 10.0 ng/L and linearity with a coefficient of estimation (r²) varied from 0.9991 to 0.9998 in the concentration level range of 0.05–2.5 μg/L for the extraction of OPPs in water samples. Finally, the proposed USAEME method was used for the extraction of OPPs from water and orange juice. The recoveries were in the range of 80.0–110.0%, and the repeatability of the method expressed as RSD (n=3) varied between 1.6 and 13%. The USAEME method has the advantage of being easy to operate, low consumption of organic solvent and high extraction efficiency.     

In‐line coupled single drop liquid–liquid–liquid microextraction with capillary electrophoresis for determining fluoroquinolones in water samples

A simple in‐line single drop liquid–liquid–liquid microextraction (SD‐LLLME) coupled with CE for the determination of two fluoroquinolones was developed. The method is capable to quantify trace amount of analytes in water samples and to improve the sensitivity of CE detection. For the SD‐LLLME, a thin layer of organic phase was used to separate a drop of 0.1 M NaOH hanging at the inlet of the capillary from the aqueous donor phase. By this way, the analytes were extracted to the acceptor phase through the organic layer based on their acidic/basic dissociation equilibrium. The drop was immersed into the organic phase during 10 min for extraction and then it is directly injected into the capillary for the analysis. Parameters such as type and volume of organic solvent phase, aqueous donor, and acceptor phases and extraction time and temperature were optimized. The enrichment factor was calculated, resulting 40‐fold for enrofloxacin (ENR) and sixfold for ciprofloxacin (CIP). The linear range were 20–400 μg/L for ENR and 60–400 μg/L for CIP. The detection limits were 10.1 μg/L and 55.3 μg/L for ENR and CIP, respectively, and a good reproducibility was obtained (4.4% for ENR and 5.6% for CIP). Two real water samples were analysed applying the new method and the obtained results presented satisfactory recovery percentages (90–100.3%).     

Hydrogen bonding structure and many‐body interactions in 1,3,5‐triazine–(water)3 and 1,2,4‐triazine–(water)3 complexes

The hydrogen bonding structure and many‐body interactions between 1,3,5‐triazine (1,2,4‐triazine) and three water molecules are studied using the density functional theory (DFT) B3LYP method and 6‐31++G** basis set. Various structures of 1,3,5‐triazine–(water)₃ and 1,2,4‐triazine–(water)₃ complexes are investigated, and the seven and eight stable structures are reported for 1,3,5‐triazine–(water)₃ and 1,2,4‐triazine–(water)₃, respectively. Many‐body analysis is also carried out to obtain relaxation energy and many‐body interaction energy (two‐, three‐, and four‐body), and the most stable conformer has the basis set superposition error corrected interaction energy of ?92.09 and ?99.53 kJ/mol. The two‐ and three‐body interactions have significant contribution to the total interaction energy, whereas the relaxation energy, four‐body interactions are very small for 1,3,5‐triazine–(water)₃ and 1,2,4‐triazine–(water)₃ complexes. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Dispersive liquid–liquid microextraction using extraction solvent lighter than water

For the first time a dispersive liquid–liquid microextraction method on the basis of an extraction solvent lighter than water was presented in this study. Three organophosphorus pesticides (OPPs) were selected as model compounds and the proposed method was carried out for their preconcentration from water samples. In this extraction method, a mixture of cyclohexane (extraction solvent) and acetone (disperser) is rapidly injected into the aqueous sample in a special vessel (see experimental section) by syringe. Thereby, a cloudy solution is formed. In this step, the OPPs are extracted into the fine droplets of cyclohexane dispersed into aqueous phase. After centrifuging the fine droplets of cyclohexane are collected on the upper of the extraction vessel. The upper phase (0.40 μL) is injected into the gas chromatograph (GC) for separation. Analytes were detected by a flame ionization detector (FID) (for high concentrations) or MS (for low concentrations). Some important parameters, such as the kind of extraction and dispersive solvents and volume of them, extraction time, temperature, and salt amount were investigated. Under the optimum conditions, the enrichment factors (EFs) ranged from 100 to 150 and extraction recoveries varied between 68 and 105%, both of which are relatively high over those of published methods. The linear ranges were wide (10–100 000 μg/L for GC‐FID and 0.01–1 μg/L for GC‐MS) and LODs were low (3–4 μg/L for GC‐FID and 0.003 μg/L for GC‐MS). The RSDs for 100.0 μg/L of each OPP in water were in the range of 5.3–7.8% (n = 5).     

Ab initio study of the structure of isocytosine–cytosine standard Watson–Crick base pairs in the gas phase and in water

Ab initio quantum chemical studies at the HF and MP2 levels with the 6-31G* basis set were performed for H-bonded isocytosine–cytosine standard Watson–Crick base pairs (denoted as iCC1) in the gas phase and in a water solution. Full geometry optimizations at the HF level without any constraints on the planarity of these complexes were carried out. The water solution was modeled by the explicit inclusion of one, two, four, and six water molecules. Six waters create the first full coordination sphere around the iCC1 base pair. All potentially possible hydration positions of the iCC1 base pair with one and two water molecules were considered. The interaction and solvation energies were corrected for the basis-set superposition error by using the full Boys–Bernardi counterpoise correction scheme. It was shown that inclusion of six instead of one, two, or four water molecules has a crucial effect on the geometry of the iCC1 base pair. In the case of six water molecules, the iCC1 moiety becomes strongly nonplanar, while in the case of a smaller number of water molecules, it deviates only slightly from the planar conformation as is adopted in the gas phase. Based on the results of these calculations, the nature of the specific H-bonding interactions, solvation effects, and the interaction energies are discussed. © 1998 John Wiley & Sons, Inc. Int J Quant Chem 69: 37–47, 1998     

Determination of carbapenems in water samples by UHPLC–MS/MS

A rapid and reliable method for the detection of five carbapenems (biapenem, imipenem, doripenem, meropenem, and faropenem) in water was developed and validated. After acidification of water samples with acetic acid, carbapenems were isolated using a Bond Elut PPL cartridge. The target compounds were separated using ultra high performance liquid chromatography with a chromatographic run time of 5 min and detected on a triple quadrupole mass spectrometer operated in positive electrospray ionization and multiple reaction monitoring mode. Mean recoveries were in the range of 76.6–106.5%, with satisfactory intraday and interday relative standard deviations lower than 10.0 and 10.8%, respectively. The limits of detection and quantification were in the ranges of 0.05–0.2 µg/L and 0.1–0.5 µg/L, respectively, depending on the analyte. The proposed method was applied to the analysis of river samples and wastewater samples from swine farms, and no carbapenems were detected in the collected samples.     

Two pseudopolymorphic hydrates of brucine: brucine–water (1/4) and brucine–water (1/5.25) at 130 K

The structures of two pseudopolymorphic hydrates of brucine, C₂₃H₂₆N₂O₄·4H₂O, (I), and C₂₃H₂₆N₂O₄·5.25H₂O, (II), have been determined at 130 K. In both (I) and (II) (which has two independent brucine mol­ecules together with 10.5 water mol­ecules of solvation in the asymmetric unit), the brucine mol­ecules form head‐to‐tail sheet substructures, which associate with the water mol­ecules in the inter­stitial cavities through hydrogen‐bonding associations and, together with water–water associations, give three‐dimensional framework structures.     

Ionic‐liquid‐based dispersive liquid–liquid microextraction combined with high‐performance liquid chromatography for the determination of multiclass pesticide residues in water samples

Ionic‐liquid‐based dispersive liquid–liquid microextraction in combination with high‐performance liquid chromatography and diode array detection has been proposed for the simultaneous analysis of four multiclass pesticide residues including carbaryl, methidathion, chlorothalonil, and ametryn from water samples. The major experimental parameters including the type and volume of ionic liquid, sample pH, type, and volume of disperser solvent and cooling time were investigated and optimum conditions were established. Under the optimum experimental conditions, limits of detection and quantification of the method were in the range of 0.1–1.8 and 0.4–5.9 μg/L, respectively, with satisfactory enrichment factors ranging from 10–20. The matrix‐matched calibration curves, which were constructed for lake water, as a representative matrix were linear over wide range with coefficients of determination of 0.996 or better. Intra‐ and interday precisions, expressed as relative standard deviations, were in the range of 1.1–9.7 and 3.1–7.8%, respectively. The relative recoveries of the spiked environmental water samples at one concentration level were in the range of 77–102%. The results of the present study revealed that the proposed method is simple, fast, and uses environmentally friendly extraction solvent for the analysis of the target pesticide residues in environmental water samples.     

Isobaric vapor–liquid equilibria for the system 1-pentanol–1-propanol–water at 101.3 kPa

Consistent vapor–liquid equilibrium data for the ternary system 1-pentanol–1-propanol–water is reported at 101.3 kPa at temperatures in the range of 362–393 K. The VLE data were satisfactorily correlated with UNIQUAC model.