四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

Trichalcogenasumanene ortho‐Quinones: Synthesis,Properties, and Transformation into Various Heteropolycycles

The regioselective transformation of heterobuckybowl trichalcogenasumanenes 1 a , b at peripheral butoxy groups afforded trichalcogenasumanene ortho ‐quinones 2 a , b . Compounds 2 a , b are distinct from 1 a , b in terms of their molecular geometry and electronic state; that is, they have a shallower bowl depth and show absorbance in the NIR region. The reaction of 2 a , b with diamines resulted in a variety of heteropolycycles, including molecular spoon 3 a – 6 a , planar π‐systems 3 b – 6 b , and highly twisted [7‐6‐6]‐fused systems 7 a , b . These new heteropolycycles had different optical/electrical properties: 4 a,b showed hole mobility of approximately 0.002 cm² V⁻¹ s⁻¹, 6 a displayed red emission in both solution and the solid state, and 7 a , b formed tight stacks of the curved π‐surface.     

Trichalcogenasumanene ortho‐Quinones: Synthesis,Properties, and Transformation into Various Heteropolycycles

The regioselective transformation of heterobuckybowl trichalcogenasumanenes 1 a , b at peripheral butoxy groups afforded trichalcogenasumanene ortho ‐quinones 2 a , b . Compounds 2 a , b are distinct from 1 a , b in terms of their molecular geometry and electronic state; that is, they have a shallower bowl depth and show absorbance in the NIR region. The reaction of 2 a , b with diamines resulted in a variety of heteropolycycles, including molecular spoon 3 a – 6 a , planar π‐systems 3 b – 6 b , and highly twisted [7‐6‐6]‐fused systems 7 a , b . These new heteropolycycles had different optical/electrical properties: 4 a,b showed hole mobility of approximately 0.002 cm² V⁻¹ s⁻¹, 6 a displayed red emission in both solution and the solid state, and 7 a , b formed tight stacks of the curved π‐surface.     

Solid-phase synthesis of 5-arylhistidines via a microwave-assisted Suzuki-Miyaura cross-coupling

Microwave irradiation efficiently promoted the solid-phase Suzuki-Miyaura reaction of a 5-bromohistidine with various arylboronic acids in the presence of a palladium catalyst. This methodology allowed the synthesis of peptides bearing a histidine residue substituted at position 5 of the imidazole ring with a phenyl, a substituted phenyl, a pyridyl, or a thienyl ring, as well as with the benzene ring of a tyrosine residue.     

Crystal engineering of photochromic diarylethene single crystals

Photochromic performance of diarylethene single crystals was controlled by crystal engineering using non-covalent aromatic-aromatic interactions as the directional intermolecular force. A diarylethene derivative with two pentafluorophenyl groups, 1,2-bis(2-methyl-5-pentafluorophenyl-3-thienyl)perfluorocyclopentene (1a), formed stoichiometric co-crystals with benzene (Bz) and naphthalene (Np) by aryl-perfluoroaryl interactions. Face-to-face pi-stacking interactions between the pentafluorophenyl groups of 1a and the aromatic molecules are responsible for 2:1 and 1:1 stoichiometric compositions in 1a/Bz and 1a/Np co-crystals, respectively. The diarylethene underwent thermally stable and photoreversible photochromic reactions in a homo-crystal of 1a and co-crystals 1a/Bz and 1a/Np. The absorption spectra of the photogenerated closed-ring isomers varied depending on the conformation of the diarylethene molecules packed in the crystals. The diarylethene 1a also formed 1:1 stoichiometric co-crystals with different kinds of diarylethenes, 1,2-bis(2-ethyl-5-phenyl-3-thienyl)perfluorocyclopentene (2a) and 1,2-bis[2-methyl-5-(1-naphthyl)-3-thienyl]perfluorocyclopentene (3a). Both co-crystals 1a/2a and 1a/3a showed photochromism. Although 1a, 2a, and 3a underwent efficient photocyclization reactions in their homo-crystals, highly selective photocyclization reactions of 2a or 3a were observed in the co-crystals. The selective reactions were confirmed by HPLC and X-ray crystallography. Excited energy transfers from 1a to 2a and from 1a to 3a are considered to occur and cause the selective reactions.     

Controlled Dynamic Helicity of a Folded Macrocycle Based on a Bisterephthalamide with a Twofold Z‐Shaped Structure

Dynamic helicity in a folded macrocycle and control of the helical preference are described. We designed macrocycle 1 with a dual mode of folding through the integration of two flexible units that are arranged twice to form a cyclic structure. As a folding unit, we used a terephthalamide skeleton and a Z‐shaped hydrocarbon: the former acted as a control unit to induce a preference of a particular sense of dynamic helicity and the latter was just a spacer. A terephthalamide unit provided a binding site for capturing a ditopic hydrogen‐bonding guest when it adopted helically folded syn forms (M/P). Thus, only the terephthalamide unit controlled the helical sense of dynamic helicity in a folded macrocycle through the supramolecular transmission of chirality upon complexation with a chiral ditopic guest. In addition, chirality on a host could also contribute to the control of the helical preference in a folded macrocycle, which led to exceptionally enhanced chiroptical signals.     

Synthesis of Some New Fused/Spiroheterocyclic Compounds Incorporating Quinone Compounds

A series of fused and spiro pyrazolones, isoxazolines, pyrimidines, β‐lactams, and thiazolidinones incorporating 4‐amino‐2‐methyl‐5,10‐dioxo‐1,5,10,11‐tetrahydrobenz[g]quinoline 3‐carbonitrile 1 and 4‐amino‐2‐methyl‐5,6,11‐trioxo‐1,4,4a,5,6,11,12,12a‐octahydro‐1,12‐diazanaphthacene 3‐carbonitrile 2. 7,8a‐c, 15,16a‐c, 19,20a‐d, 21,22a‐d , have been synthesised by cyclocondensation addition reaction and cycloaddition reaction of hydrazines, hydroxylamine, urea, thiourea, monochloroacetyl chloride and mercaptoacetic acid with the synthesised 15,16a‐c and 17,18a‐c .     

Design of Phase‐Vanishing Reactions

Phase‐vanishing reactions utilize a perfluorinated solvent as a liquid membrane to separate a substrate and a reagent. Since their introduction less than ten years ago, phase‐vanishing reactions have become a valuable alternative to reactions that require a slow addition of a reagent. A variety of experimental designs allow reactions to be carried out under anhydrous conditions, under photolytic conditions, under solvent‐free conditions, with a gas as a reagent, and under reflux.     

Toward amino acid typing for proteins in FFLUX

Continuing the development of the FFLUX, a multipolar polarizable force field driven by machine learning, we present a modern approach to atom‐typing and building transferable models for predicting atomic properties in proteins. Amino acid atomic charges in a peptide chain respond to the substitution of a neighboring residue and this response can be categorized in a manner similar to atom‐typing. Using a machine learning method called kriging, we are able to build predictive models for an atom that is defined, not only by its local environment, but also by its neighboring residues, for a minimal additional computational cost. We found that prediction errors were up to 11 times lower when using a model specific to the correct group of neighboring residues, with a mean prediction of ∼0.0015 au. This finding suggests that atoms in a force field should be defined by more than just their immediate atomic neighbors. When comparing an atom in a single alanine to an analogous atom in a deca‐alanine helix, the mean difference in charge is 0.026 au. Meanwhile, the same difference between a trialanine and a deca‐alanine helix is only 0.012 au. When compared to deca‐alanine models, the transferable models are up to 20 times faster to train, and require significantly less ab initio calculation, providing a practical route to modeling large biological systems. © 2016 The Authors. Journal of Computational Chemistry Published by Wiley Periodicals, Inc.     

Towards DNA Nanomachines for Cancer Treatment: Achieving Selective and Efficient Cleavage of Folded RNA

Despite decades of effort, gene therapy (GT) has failed to deliver clinically significant anticancer treatment, owing in part to low selectivity, low efficiency, and poor accessibility of folded RNA targets. Herein, we propose to solve these common problems of GT agents by using a DNA nanotechnology approach. We designed a deoxyribozyme‐based DNA machine that can i) recognize the sequence of a cancer biomarker with high selectivity, ii) tightly bind a structured fragment of a housekeeping gene mRNA, and iii) cleave it with efficiency greater than that of a traditional DZ‐based cleaving agent. An important advantage of the DNA nanomachine over other gene therapy approaches (antisense, siRNA, and CRISPR/cas) is its ability to cleave a housekeeping gene mRNA after being activated by a cancer marker RNA, which can potentially increase the efficiency of anticancer gene therapy. The DNA machine could become a prototype platform for a new type of anticancer GT agent.     

The Synthesis of New Spiro β-Lactam and Thiazolidinone Compounds Incorporating Quinones and Their Biological Activity

A series of some fused and spiro heterocyclic compounds such as pyrazolines, isoxazolines, pyrimidines, β-lactams, and thiazolidinone derivatives incorporating compounds 3, 6a–d, 7a–d, 9a–c, 10a–c, 11a–c, 12a–c, and 13a–c have been synthesized by a cycloaddition and cyclocondensation reaction of monochloroacetyl chloride, mercaptoacetic acid, hydrazines, hydroxylamine, urea, and thiourea with the prepared 5a–d and 8a–c.     

Electrokinetic flow in an elliptic microchannel covered by ion-penetrable membrane

The electrokinetic flow of an electrolyte solution in an elliptical microchannel covered by an ion-penetrable, charged membrane layer is examined theoretically. The present analysis extends previous results in that a two-dimensional problem is considered, and the system under consideration simulates the flow of a fluid, for example, in a microchannel of biological nature such as vein. The electroosmostic volumetric flow rate, the total electric current, the streaming potential, and the electroviscous effect of the system under consideration are evaluated. We show that, for a constant hydraulic diameter, the variations of these quantities as a function of the aspect ratio of a microchannel may have a local minimum or a local maximum at a medium level of ionic strength, which depends on the thickness of the membrane layer. For a constant cross-sectional area, the electroosmostic volumetric flow rate, the total electric current, and the streaming potential increase monotonically with the increase in the aspect ratio, but the reverse is true for the electroviscous effect.     

Utility of (p‐Sulfonamidophenyl)azomalononitrile,and Ethyl Acetoacetate in Synthesis of Fused Azole and Azines Derivatives II

[(p‐Sulfonamidophenyl)azo]malononitrile ( 1a,b ) reacted with N‐cyclohexanemethylidene‐2‐cyanoacetohydrazide, N'‐arylmethylidene‐2‐cyanoacetohydrazide ( 3a‐c ), S‐methylthiourea and hydrazine hydrate to afford [1,2,4]triazolo‐[1,5‐a]pyridinone derivatives ( 2a,b ) & ( 4a‐c ), substituted pyrimidines 5a,b and 6a,b. The corresponding pyridazinones 7a,b were synthesized from the reaction of 1c,d with ethyl cyanoacetate. Compound 7a,b reacted with elemental sulfur to yield 8a,b . Compound 6a underwent cycloaddition with α‐cinnamonitrile 9a‐e to yield 11a‐c, 14 and 15 . Also, compound 6a reacted with β‐ketoester and 1,3‐diketones to give 16, 17 and 18 .     

Photochromic reactions of diarylethenes in single crystals with intermolecular O--H...N hydrogen-bonding networks

The crystal structures and photochromic performance of a single crystal of a diarylethene derivative possessing carboxyl groups, 1,2-bis(5-carboxyl-2-methyl-3-thienyl)perfluorocyclopentene (1 a), and cocrystals of 1 a with 4,4'-, 2,4'-, and 2,2'-bipyridines were examined. In crystal 1 a, a discrete cyclic structure was observed, in which four 1 a molecules are linked through hydrogen bonds between the carboxyl groups. In the homocrystal, photoreactive and photoinactive conformers of 1 a exist in the ratio of 1:1. In the cocrystals of 1 a with bipyridines, O--HN-type hydrogen bonds between 1 a and pyridyl groups were formed, and all 1 a molecules are fixed in a photoreactive conformation. Both the homocrystal 1 a and the cocrystals showed photochromic performances, and color variation from bluish-violet to cyan was observed, depending on the conformation of the packed diarylethene molecules.     

Domino 6pi-electrocyclization/Diels-Alder reactions on 1,6-disubstituted (E,Z,E)-1,3,5-hexatrienes: versatile access to highly substituted tri- and tetracyclic systems

The (E,Z,E)-1,3,5-hexatrienes 1a, 2a,b and 3b undergo 6pi-electrocyclization within 15-30 min upon heating to 200-215 degrees C. While the cyclohexene-annelated products 8a,b were stable, the analogous cyclopentene- and cycloheptene-annelated derivatives 7a and 9b easily underwent dehydrogenation to the corresponding aromatic compounds 10a and 12b during the work-up. The cyclohexadiene derivatives 8a,b were employed in thermal Diels-Alder reactions with 4-phenyl-3H-1,2,4-triazoline-3,5-dione (PTAD) and tetracyanoethylene (TCNE) to give the expected [4+2] cycloadducts 13a and 14a in good yields (60 and 78%). The initially formed cycloadduct of 8a and dimethyl acetylenedicarboxylate (DMAD) underwent a subsequent retro-Diels-Alder reaction to give the tetrahydronaphthalene 11b (47%). Under high pressure (10 kbar), the cycloadduct 15a was formed at room temperature and could be isolated in 44% yield. TCNE and N-phenylmaleimide with 8a under high pressure also led to the [4+2] cycloadducts 14a and 16a in good yields (60 and 77%). The 6pi-electrocyclization and subsequent Diels-Alder reaction, when performed as a one-pot domino process, provided direct access to Diels-Alder products of intermediately formed 6pi-electrocyclization products, for example from the 1,3,5-hexatrienes 1a,b, 2a,b, 3b and TCNE to the corresponding tricyclic products 17a,b, 14a,b, 18b in moderate to good yields (27-80%) depending on the nature of the alkoxycarbonyl group. Such sequential reactions with N-phenylmaleimide, maleic anhydride, dimethyl maleate and fumarodinitrile, the latter two under high pressure (10 kbar), worked as well to yield 16b (70%), 19a,b (19, 32%) and 20b (39%) and 21b (76%), respectively. With PTAD, however, the hexatrienes 2a,b reacted at ambient temperature without 6pi-electrocyclization to give the formal [4+2] cycloadducts 27a,b (48 and 46%), most probably via zwitterionic intermediates 23a,b and 25a,b.     

When,in the context of drug design,can a fluorine atom successfully substitute a hydroxyl group?

In this article, we deal with the question of whether a fluorine atom can substitute a hydroxyl group in such a way that will lead to a compound showing a desired biologic activity, that is, a potential new drug. It is obvious that a fluorine atom differs from a hydroxyl group, as it cannot donate hydrogen bonds. However, it can accept them. Moreover, both fluorine and oxygen are of similar size and are the most electronegative elements. Therefore, a fluorine atom is thought to be a good substitute for a hydroxyl group. However, it was shown that for conformationally labile aliphatic compounds a replacement of a hydroxyl by a fluorine increases conformational diversity, so the fluorine‐containing aliphatic molecules are present in equilibrium at room temperature as a mixture of several different conformers. In contrast, for cyclic compounds the substitution of an OH group by an F atom does not much change shape and electrostatic potential around corresponding conformers. Moreover, these compounds are present in equilibrium at room temperature in aqueous solution as a mixture of the same most favored structures. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Antiaromatic Sapphyrin Isomer: Transformation into Contracted Porphyrinoids with Variable Aromaticity

Sapphyrin is a pentapyrrolic expanded porphyrin with a 22π aromatic character. Herein, we report the synthesis of a 20π antiaromatic sapphyrin isomer 1 by oxidative cyclization of a pentapyrrane precursor P₅ with a terminal β-linked pyrrole. The resulting isomer 1 , containing a mis-linked bipyrrole unit in the skeleton, exhibits a reactivity for further oxidation due to the distinct antiaromatic electronic structure, affording a fused macrocycle 2 , possessing a spiro-carbon-containing [5.6.5.6]-tetracyclic structure. Subsequent treatment with an acid afforded a weakly aromatic pyrrolone-appended N-confused corrole 3 , and thermal fusion gave a [5.6.5.7]-tetracyclic-ring-embedded 14π aromatic triphyrin(2.1.1) analog 4 . The cyclization at the mis-linked pyrrole moiety of P₅ played a crucial role in synthesizing the antiaromatic porphyrinoid susceptible to facile transformation to novel porphyrinoids with variable aromaticity.     

Palladium‐Catalyzed Reductive Coupling Reaction of Terminal Alkynes with Aryl Iodides Utilizing Hafnocene Difluoride as a Hafnium Hydride Precursor Leading to trans‐Alkenes

Herein, we describe a reductive cross‐coupling of alkynes and aryl iodides by using a novel catalytic system composed of a catalytic amount of palladium dichloride and a promoter precursor, hafnocene difluoride (Cp₂HfF₂, Cp=cyclopentadienyl anion), in the presence of a mild reducing reagent, a hydrosilane, leading to a one‐pot preparation of trans‐alkenes. In this process, a series of coupling reactions efficiently proceeds through the following three steps: (i) an initial formation of hafnocene hydride from hafnocene difluoride and the hydrosilane, (ii) a subsequent hydrohafnation toward alkynes, and (iii) a final transmetalation of the alkenyl hafnium species to a palladium complex. This reductive coupling could be chemoselectively applied to the preparation of trans‐alkenes with various functional groups, such as an alkyl group, a halogen, an ester, a nitro group, a heterocycle, a boronic ester, and an internal alkyne.     

Chains,Necklaces and Weaving Chain‐link Grids from Self‐Assembly Reactions

Assembly of two ditopic units, a phenanthroline substituted by 4‐ethynyl pyridines at the 2‐and 9‐positions and a dimetallic paddlewheel, gives a linear chain polymer rather than a closed cyclic species, which would appear equally possible. The chain may be decorated by binding a copper‐containing macrocycle around the phenanthroline units to form a polypseudorotaxane. When two phenanthroline ligands are assembled in a first step around copper(I), the paddlewheel acceptor can link them in a second step to form a two‐dimensional interwoven grid that resembles the form of a chain‐link fence. Each copper(I) centre in this structure is chiral, and the crystal shows complete homochirality, implying selection during the assembly process.     

A Rapid and Efficient Way to Dynamic Creation of Cross‐Reactive Sensor Arrays Based on Ionic Liquids

Based on the simple counterion exchange of ionic liquids, a rapid, facile, and efficient strategy to create a cross‐reactive sensor array with a dynamic tunable feature was developed, and exemplified by the construction of a sensor array for the identification and classification of nitroaromatics and explosives mimics. To achieve a good sensing system with fast response, good sensitivity, and low detection limit, the synthesized ionic liquid receptors were tethered onto a silica matrix with a macro‐mesoporous hierarchical structure. Through the facile anion exchange approach, abundant ionic‐liquid‐based individual receptors with diversiform properties, such as different micro‐environments, diverse molecular interactions, and distinctive physico‐chemical properties, were easily and quickly synthesized to generate a distinct fingerprint of explosives for pattern recognition. The reversible anion exchange ability further endowed the sensor array with a dynamic tunable feature as well as good controllability and practicality for real‐world application. With the assistance of statistical analysis, such as principal component analysis (PCA) and linear discrimination analysis (LDA), an optimized‐size array with a good resolution was rationally established from a large number of IL‐based receptors. The performed experiments suggested that the ionic‐liquid‐based sensing protocol is a general and powerful strategy for creating a cross‐reactive sensor array that could find a wide range of applications for sensing various analytes or complex mixtures.