Optimized photoelectric receiver to enhance modulation bandwidth of visible light communication system

In the visible light communication (VLC) system which combines lighting and communication functions, the 3-dB modulation bandwidth is mainly limited by the light-emitting diode (LED) suffered high-frequency response attenuation. An optimized photoelectric receiver was proposed to enhance the 3-dB modulation bandwidth. The frequency response of the photoelectric receiver was derived. Theoretical analysis predicted that a gain peak would appear in the high-frequency response of the photoelectric receiver. The value of the gain and the frequency point of the gain peak can be adjusted by selecting appropriate values of feedback resistor and capacitor. Then, the measurement platform of 3-dB modulation bandwidth for blue-LED VLC system was established. Experimental measurements demonstrated that the photoelectric receiver with proper sets of feedback resistor and capacitor can compensate the high-frequency response attenuation of a normal LED. The 3-dB modulation bandwidth obtains 56% enhancement if the photoelectric receiver was replaced from a commercial one to our optimized design. In order to further expand the 3-dB modulation bandwidth, an equalization circuit consists of two-stage transistor amplifier and an emitter-follower was introduced to suppress the low-frequency response. The 3-dB modulation bandwidth for the VLC system with our optimized photoelectric receiver can be expanded to 241 or 281 MHz, while the circuit was, respectively, arranged as pre-equalization or post-equalization.     

Micro-light-emitting-diode array with dual functions of visible light communication and illumination

We demonstrate high-speed blue 4 × 4 micro-light-emitting-diode(LED) arrays with 14 light-emitting units(two light-emitting units are used as the positive and negative electrodes for power supply, respectively) comprising multiple quantum wells formed of Ga N epitaxial layers grown on a sapphire substrate, and experimentally test their applicability for being used as VLC transmitters and illuminations. The micro-LED arrays provide a maximum-3-d B frequency response of 60.5 MHz with a smooth frequency curve from 1 MHz to 500 MHz for an optical output power of 165 mW at an injection current of 30 mA, which, to our knowledge, is the highest response frequency ever reported for blue Ga N-based LEDs operating at that level of optical output power. The relationship between the frequency and size of the device single pixel diameter reveals the relationship between the response frequency and diffusion capacitance of the device.     

Generation of flat power-envelope terahertz-wide modulation sidebands from a continuous-wave laser based on an external electro-optic phase modulator

Flat power-envelope terahertz-wide modulation sidebands are generated by only electro-optic phase modulation of continuous-wave laser light. Generation and power equalization of widespread sidebands are realized simultaneously by spatial distribution of the modulation index within a laser beam cross section by use of simple domain-engineering processes in LiTaO3 electro-optic crystal. Generation of 46 sidebands spaced by 16.25 GHz within a -3-dB bandwidth (over a 1-THz span for a +/- 3-dB bandwidth) is demonstrated.     

A millimeter-wave monolithic grid amplifier

A 36-element monolithic grid amplifier has been fabricated. The peak gain is 5 dB at 40.8 GHz with a 3-dB bandwidth of 1.4 GHz. The active elements are pairs of heterojunction-bipolar-transistor's (HBT's). The individual transistors in the grid have a maximum oscillation frequency,f _max , of 100 GHz. The grid includes base stabilizing capacitors which result in a highly stable grid. This is the first report of a successful monolithic grid amplifier.     

Circuit model for analysis of SOA-based photonic switch

This paper presents an equivalent lumped element electric circuit model for traveling wave semiconductor optical amplifier (SOA) in integrated circuit applications. The model facilitates incorporation of chip and package parasitic elements of SOA. The model is used to represent an all optical 2 × 2 switch based on cross gain modulation in SOA capable of operating at an ultra fast speed. SPICE simulation of the switch with the proposed circuit model provides bit error rate (BER) values at the switch output which agrees well with the experimentally measured values at 10 Gb/s. The degradation of switching performance has been examined in terms of bit error rate, modulation bandwidth and switching time in the presence of chip parasitic elements of SOA.     

An Inverter-Based,CMOS, Low-Power Optical Receiver Front-End

In this paper, a low-power optical receiver front-end which consists of a transimpedance amplifier (TIA) and three stages of limiting amplifier (LA) for 2.5 Gb/s applications is proposed in 0.18 µm CMOS technology. The proposed TIA benefits from a modified inverter structure, in which the input resistance is properly reduced due to the use of diode-connected transistors in comparison with conventional inverter circuit. Also, an active inductor is used in parallel with a diode-connected transistor at the output node, which provides a low output resistance, while it resonates with the load capacitance to extend the ?3 dB frequency bandwidth. Moreover, three stages of LAs are used to obtain extra gain, in which each LA cell uses active inductor load. However, HSPICE simulations for the proposed TIA circuit show a 42.24 dBΩ transimpedance gain, 1.96 GHz frequency bandwidth, 11.7 pA/√Hz input referred noise, and only 972 µW of power consumption at 1.5 V supply. Also, simulation results for the whole receiver system show a 75.6 dB gain, 1.7 GHz frequency bandwidth, and 6.54 mW of power consumption at 1.5 V supply. Finally, simulation results indicate that the proposed receiver system has good performances to be used as a low-power optical receiver front-end.     

Narrow spectral response of a Brillouin amplifier

We investigate the spectral response of a Brillouin amplifier in the frequency regime within the stimulated-Brillouin-scattering (SBS) bandwidth. This is done by amplitude modulating the pump with a low frequency; therefore, unlike in previous studies, the spectrum of the modulated pump is, in all cases, smaller than the SBS bandwidth. We show both theoretically and experimentally that, unlike phase modulation, amplitude modulation increases the Brillouin amplifier gain and that this effect has a very narrow bandwidth. Only modulation frequencies that are lower than a certain cutoff frequency increase the gain. This cutoff frequency can be arbitrarily small.     

Simple digital FIR equalizer design for improving the phosphor LED modulation bandwidth in visible light communication

We propose and demonstrate a simple digital post-equalization technique to improve the bandwidth-limitation of light-emitting-diode (LED) visible-light-communication (VLC) channel. The design of finite-impulse-response equalizer according to the channel response is presented to improve the bandwidth limitation of LED VLC channel. Here, no optical blue filter is used. The simulation and experimental results show $\sim $ ～ 10 times enhancement of the direct modulation speed of white-light LED VLC system. When compares with the previous demonstration using high-pass equalization circuit constructed by lumped capacitor and resistor, the proposed scheme shows an improvement in signal quality and transmission distance, and a 10 Mbit/s error-free free-space transmission over 1 m can be achieved under the bit error rate of $< 10^{-9}$ < 10 ? 9 .     

RSD固态脉冲电源中的罗氏线圈电流检测技术

 介绍了基于高速大功率反向开关晶体管(RSD)的磁压缩固态脉冲电源试验平台,就RSD状态电流及磁压缩脉冲电流的波形特征对检测环节高需求的问题,研究了罗氏(Rogowski)线圈传感头的频率特性,在对比已有传感头信号处理方法的基础上,给出了一种新型结构的自积分与外积分复合式罗氏线圈的设计过程和参数选取方法,在保证传感器具有1 mV/A灵敏度的前提下,将传感器的工作频带从低频拓宽到线圈的自然角频率。给出了二级磁压缩网络放电的负载电流实验波形及RSD开关的触发、导通电流波形,验证了该罗氏线圈传感器能够满足本固态脉冲电源中的RSD开关状态电流高精度检测和负载电流的高频检测要求。     

Tunable microwave photonics filter with dual pass-band based on PM-FBG and PS-FBG

In this paper, a dual pass-band microwave photonics filter with simple, commercial structure is proposed and demonstrated. The key devices are the specially designed polarization maintaining fiber Bragg grating and the phase shift fiber Bragg grating. They are employed to extract out two orthogonally polarized sidebands and remove the undesired sideband, respectively. The simulation results show that without any extra operations or electrical processing, the dual pass-band can be achieved with the two central frequencies of 3.5 GHz and 8 GHz when the frequency spacing between the two orthogonally polarized sidebands is 12 GHz, their 3-dB bandwidth are about 500 MHz. The central frequencies of the two pass-bands can be simply tuned by adjusting the frequency spacing in a range of 4 GHz. In addition, the spurious free dynamic ranges for the two pass-bands are 75.71 dB Hz^2/3 and 70.17 dB Hz^2/3 respectively. Finally, a brief experiment is also carried out to demonstrate the feasibility.     

All-optical microwave bandpass filter and phase shifter using a broadband optical source and an optical phase modulator

We propose a system that can perform microwave bandpass filtering and phase shifting simultaneously without redundant optical-electrical and electrical-optical conversions. The principle is based on polarization-dependant phase modulation of a broadband optical source and the variable optical carrier time shift method. A single-bandpass microwave photonic filter with a central frequency of 10.8 GHz, a 3-dB bandwidth of 670 MHz, and a 360° phase tuning range is experimentally demonstrated. The capability of our configuration to implement wideband phase shifters is also verified.     

宽频带无源积分器的设计和实验

 为获得宽频带的无源积分器,建立了考虑杂散参数的等效电路并进行了电路仿真。结果表明无源积分器的频响上限由杂散参数决定。对于相同结构的积分器,增大RC积分常数,会使杂散参数的影响加剧,导致积分器的高频响应变差。使用同轴结构可以减小电容的杂散电感,提高积分器的带宽。对制作的RC常数为10 μs的同轴式积分器进行了频响实验。实验结果表明：在偏差小于5％的范围内,同轴式积分器带宽为50 kHz～80 MHz。在D-dot电压探头线下标定实验和初级试验平台(PTS)单路样机激光触发开关输出电压测量中,使用该同轴积分器获取的测量波形没有波形畸变和高频干扰。     

Design of full-duplex and multifunction bidirectional CMOS transceiver for optical interconnect applications

This work presents a full-duplex and multifunction bidirectional transceiver for optical interconnect application. The transceiver utilizes a common limiting amplifier/gain stage, thus reducing total chip area and total power consumption. While providing a full-duplex bidirectional transmission with the aid of a hybrid circuit between the electrical input/output (I/O) and the optoelectronic signals from the transmitter and receiver circuits, it also allows for a half-duplex operation with the aid of a switch between the transimpedance amplifier signals and the transmitter electrical input from the I/O port. The multifunction bidirectional CMOS transceiver is designed in a 0.13 µm Si-CMOS technology, with power dissipation of 79 and 54.4 mW for the transmitter and receiver, respectively. It shows a 3-dB bandwidth of 5.58 and 5.69 GHz for the transmitter and the receiver respectively and with a 3-dB gain of 66.14 and 69.6 dB, in full-duplex mode. The transceiver operates up to 7 Gb/s in full-duplex mode.     

Low-frequency and broadband metamaterial absorber based on lumped elements: design,characterization and experiment

In this paper, we propose and experimentally validate a low-frequency metamaterial absorber (MMA) based on lumped elements with broadband stronger absorptivity in the microwave regime. Compared with the electric resonator structure MMA, the composite MMA (CMMA) loaded with lumped elements has stronger absorptivity and nearly impedance-matched to the free space in a broadband frequency range. The simulated voltage in lumped elements and the absorbance under different substrate loss conditions indicate that incident electromagnetic wave energy is mainly transformed to electric energy in the absorption band with high efficiency and subsequently consumed by lumped resistors. Simulated surface current and power loss density distributions further clarify the mechanism underlying observed absorption. The CMMA also shows a polarization-insensitive and wide-angle strong absorption. Finally, we fabricate and measure the MMA and CMMA samples. The CMMA yields below ?10 dB reflectance from 2.85 to 5.31 GHz in the experiment, and the relative bandwidth is about 60.3 %. This low-frequency microwave absorber has potential applications in many martial fields.     

Superconducting tunable filter with constant bandwidth using coplanar waveguide resonators

In this paper we propose a two-pole varactor-tuned superconducting filter using coplanar waveguide(CPW) spiralin-spiral-out(SISO) resonators. Novel internal and external coupling structures are introduced to meet the requirements for a tunable filter with a constant absolute bandwidth. The fabricated device has a frequency tuning range of 14.4%at frequencies ranging from 274.1 MHz to 317.7 MHz, a 3-d B bandwidth of 5.14 ± 0.06 MHz, and an insertion loss of0.08 d B–0.70 d B. The simulated and measured results are in excellent agreement with each other.     

Dynamic characteristics of AlGaInAs/InP octagonal resonator microlaser

The static and dynamic characteristics are investigated for an AlGaInAs/InP octagonal resonator microlaser with a side length of 10.8 μm and a 2-μm-wide vertex output waveguide. The scattered light is observed by top-view infrared microscopic image and compared with simulated mode field pattern. Single-mode operation with the side-mode suppression ratio of 42 dB is achieved. Small-signal modulation responses with a 3-dB bandwidth of 15.7 GHz are reached at 287 K, and a clear eye diagram is demonstrated at 15 Gbit/s.     

Broadband Brillouin slow light with multiple-longitudinal-mode,tunable pump

We propose and demonstrate broadband Brillouin slow light using a multiple-longitudinal-mode tunable fiber laser as Brillouin pump. A tunable broadband Brillouin pump with a tuning range from 1 520 to 1 555 nm is generated using a fiber ring laser with a semiconductor optical amplifier (SOA) as its gain medium. The pump spectrum consists of a large number of longitudinal modes separated by 6 MHz. The 3-dB bandwidth is about 11.5 GHz, and its fluctuation is less than 100 MHz within the tuning range. An 8-Gb/s data signal can be delayed by up to 83.0 ps (bit error rate < 10 9) at 17-dBm pump power.     

非制冷红外探测器读出电路的非均匀性研究

对于长线列的非制冷红外探测器组件, 不同探测元之间的非均匀性是衡量电路设计的关键指标. 为了实现长线列非制冷红外探测器的高性能读出, 本文设计了一种基于电流镜方式的非制冷红外探测器160线列读出电路, 电路由电流镜输入模块、电容负反馈互导放大器模块及相关双采样输出模块组成. 电路采用0.5 μm工艺制作完成. 通过合理设置电路中MOS管的参数和布局电流镜版图, 电路的非均匀性有了明显地改善. 通过测试, 电路的非均匀性小于1%, 器件总功耗约为100 mW, 并具有良好的低噪声特性, 输出噪声小于1 mV, 输出摆幅大于2 V. 该电路与160线列非制冷红外探测器互连后, 能较好地完成红外信号的读出, 在积分时间为20 μups的情况下, 器件的响应为0.294 mV/Ω, 整体性能良好. 该电路的研制对超长线列的非制冷红外冷探测器读出电路研制奠定了重要的技术基础.     

Generation of 40-GHz control signals from flag pulses for switching all-optical gates for use with optical packets

We demonstrate an all-optical circuit capable of generating 40-GHz control signals from flag pulses that can be used to define the switching state of all-optical gates for use with optical packets. The circuit comprises a Fabry-Perot filter and a semiconductor optical amplifier, and with a single pulse it can generate 12 control pulses with 0.64-dB amplitude modulation. With two and three flag pulses the number of control pulses becomes 36 and 54, respectively.     

Photo-reception properties of common LEDs

The article proves that common LEDs may act as photodetectors with limited sensitivity, if they are polarized with an appropriate reverse voltage. The measured responsivities are ranged between 0.002 and 0.156 A/W and they depend on the LED type. The only one exception are white (phosphorescent) LEDs which do not exhibit any photosensitivity. There have also shown that a bandwidth of LEDs, which were examined in a role of photodetectors, is of a few tens of MHz, which is an order of magnitude greater than their modulation bandwidth as transmitters. The reasons of the observed LEDs behaviour are explained theoretically. The obtained results are indicated that some of them may be used as both transmitters and receivers in the VLC links working in a bi-directional half-duplex mode.