On the Mechanism of Copper(I)‐Catalyzed Azide–Alkyne Cycloaddition

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction regiospecifically produces 1,4‐disubstituted‐1,2,3‐triazole molecules. This heterocycle formation chemistry has high tolerance to reaction conditions and substrate structures. Therefore, it has been practiced not only within, but also far beyond the area of heterocyclic chemistry. Herein, the mechanistic understanding of CuAAC is summarized, with a particular emphasis on the significance of copper/azide interactions. Our analysis concludes that the formation of the azide/copper(I) acetylide complex in the early stage of the reaction dictates the reaction rate. The subsequent triazole ring‐formation step is fast and consequently possibly kinetically invisible. Therefore, structures of substrates and copper catalysts, as well as other reaction variables that are conducive to the formation of the copper/alkyne/azide ternary complex predisposed for cycloaddition would result in highly efficient CuAAC reactions. Specifically, terminal alkynes with relatively low pK_a values and an inclination to engage in π‐backbonding with copper(I), azides with ancillary copper‐binding ligands (aka chelating azides), and copper catalysts that resist aggregation, balance redox activity with Lewis acidity, and allow for dinuclear cooperative catalysis are favored in CuAAC reactions. Brief discussions on the mechanistic aspects of internal alkyne‐involved CuAAC reactions are also included, based on the relatively limited data that are available at this point.     

NMR and mass spectral analysis of step-growth polymers from azide alkyne cycloaddition and regioselectivity afforded by copper(I) and ruthenium(II) catalysts

Azide alkyne cycloaddition was applied to step growth polymerization of the diazido monomer, di(3-azido-2-hydroxypropyl) ether of bisphenol-A (DAHP-BPA) with either tetraethyleneglycol dipropargyl ether (TEGDPE) or tetraethyleneglycol dipropiolate (TEGDP). Polymerizations were conducted without catalyst and in the presence of Cu(I) or Ru(II) complex. The resulting oligomers and polymers were characterized using ¹H- and ¹³C-NMR spectroscopy and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS), with an emphasis on the relative abundance of 1,4- vs. 1,5-disubstituted regioisomeric 1,2,3-triazoles. Uncatalyzed reaction of DAHP-BPA/TEGDPE at 70°C yielded a 55/45 mixture of 1,4/1,5-disubstituted triazoles; reaction was slow and residual alkyne end groups were observed, suggesting attritional loss of azide. Catalyzed with Cu(PPh₃)₃Br, the same system yielded 93/7, 1,4/1,5-disubstituted triazoles, and few residual end groups were detected, consistent with higher molecular weight and controlled 1:1 depletion of azide and alkyne. Cp*RuCl(COD) catalyst was not soluble in the bulk system, necessitating solution polymerization in THF. Ru(II) yielded 6/94, 1,4/1,5-disubstituted triazoles, and MALDI-TOF-MS showed an end group composition similar to that observed with Cu(I). Uncatalyzed reaction of the DAHP-BPA/TEGDP system, involving the more reactive propiolate, yielded a high proportion (85%) of 1,4-disubstituted triazole linkages, and MALDI-TOF-MS revealed a controlled 1:1 depletion of azide and alkyne groups.     

Copper(I)‐Catalyzed Cycloaddition of Azides to Multiple Alkynes: A Selectivity Study Using a Calixarene Framework

Copper(I)‐catalyzed addition of limited amounts of azides to multiple alkynes, which led to statistical mixtures of triazole/acetylene derivatives or, in other cases, resulted in preferred formation of multiple triazoles, was studied at pre‐organizable calixarene platforms bearing up to four propargyl groups. Depending on calixarene structures and reaction conditions, the unprecedented specific or selective formation of exhaustively triazolated calixarenes or a complete loss of the selectivity were observed. Both autocatalytic copper activation and a local copper(I) concentration increase due to copper–triazole complexation were thoroughly studied as the most expected reasons for the selectivity and both were disproved. Mixed triazolated/propargylated calixarenes and their copper(I) complexes proved not to be involved in the cascade‐like process that was modeled to be driven by an intramolecular transfer of two copper(I) ions from a just‐formed binuclear copper intermediate to the adjacent acetylene unit.     

Synthesis and characterization of polymer linked copper(I) bis(N‐heterocyclic carbene) mechanocatalysts

In this paper, the synthesis and characterization of a series of latent polymeric bis(N‐heterocyclic carbene) (NHC) copper(I) complexes is reported, which can be activated for the copper(I)‐catalyzed azide/alkyne cycloaddition (CuAAC) via ultrasound. To prove the influence of chain length and nature of the polymer towards the activation, poly(isobutylene) (PIB), poly(styrene) (PS) and poly(tetrahydrofuran) (PTHF) are synthesized via living polymerization techniques (LCCP, ATRP, CROP) obtaining different chain lengths (from 2500 to 9000 g/mol), followed by quaternization with N‐methylimidazole, generating the corresponding N‐methylimidazolium‐telechelic polymers. The deprotonation of these macroligands via strong bases like sodium tert‐butoxide (NaO^tBu) or potassium hexamethyldisilazide (KHMDS) yields the free N‐heterocyclic carbenes (NHCs), which are used to coordinate to tetrakis(acetonitrile)copper(I) hexafluorophosphate, forming the final polymer‐based mono‐ and bis(N‐methylimidazole‐2‐ylidene) copper(I)X complexes. The structural proof of these complexes is accomplished via ¹H‐NMR spectroscopy, MALDI‐TOF‐MS and GPC‐techniques. The activation of the copper(I) biscarbene catalysts by ultrasound is studied by GPC, revealing the cleavage of one shielding NHC‐ligand. The initial catalytic latency and the via ultrasound introduced catalytic activation is successfully demonstrated monitoring a CuAAC “click” reaction of benzyl azide and phenylacetylene by in situ ¹H‐NMR spectroscopy introducing thus “click” conversions up to 97%. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3893–3907     

Brønsted Acid‐Catalyzed Three‐Component 1,3‐Dipolar Cycloadditions of 1,2‐Disubstituted Alkynes with Aldehyde‐Generated Azomethine Ylides

The first 1,3‐dipolar cycloadditions (1,3‐DCs) of 1,2‐disubstituted alkynes with aldehyde‐generated azomethine ylides have been established, leading to the efficient synthesis of poly‐substituted 2,5‐dihydropyrroles.The Brønsted acid‐catalyzed three‐component 1,3‐DCs of but‐2‐ynedioates, aldehydes, and diethyl 2‐aminomalonate tolerate a wide range of substrates, offering structurally diverse poly‐substituted 2,5‐dihydropyrroles in high yields. This protocol not only provides an easy and efficient approach to poly‐substituted 2,5‐dihydropyrroles but also greatly enriches the chemistry of 1,3‐DCs, especially alkyne‐involved 1,3‐DCs.     

Copper(I) Zeolites as Heterogeneous and Ligand‐Free Catalysts: [3+2] Cycloaddition of Azomethine Imines

Clicking in zeolites : Copper(I)‐exchanged zeolites proved to be practical and efficient catalysts for the cycloaddition of azomethine imines with alkynes, providing a convenient access to N,N‐bicyclic pyrazolidinone derivatives (see scheme). With high regioselectivity, 100 % atom economy, and convenient product isolation, this heterogeneously catalyzed version of the Dorn cycloaddition corresponds to click‐chemistry criteria.

     

Influence of residual impurities on ring‐opening metathesis polymerization after copper(I)‐catalyzed alkyne‐azide cycloaddition click reaction

Bottlebrush polymers (BBPs) are three‐dimensional polymers with great academic and industrial potential owing to their highly tunable and intricate architecture. The most popular method to synthesize BBPs is ring‐opening metathesis polymerization (ROMP) with Grubbs' catalyst, allowing living grafting‐through polymerization of macromonomers of up to ultrahigh molecular weights with narrow molecular weight distribution. In this case, it has been well recognized that the purity of macromonomers (MMs) is critical for a successful ROMP reaction. For MMs synthesized from reversible‐deactivation radical polymerization, Grubbs and Xia demonstrated that the better control of ROMP reaction can be achieved when they are prepared via “growth‐then‐coupling” method that is coupling a norbornenyl group to end‐functionalized prepolymers. However, these MMs can also contain various residual impurities from previous synthetic steps, which can potentially poison the catalyst and hamper the ROMP reaction. Herein, we intentionally doped possible impurities into purified MMs to identify the most poisoning species. As a result, it was found that alkyne‐functionalized norbornene most significantly retarded the ROMP reaction due to a formation of Ru‐vinyl‐carbene intermediates having low catalytic reactivity, whereas the other reagents such as solvent, Cu‐catalyst, ligands, and azido‐terminated prepolymers were relatively inert. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 726–737     

Terminal and Internal Alkyne Complexes and Azide-Alkyne Cycloaddition Chemistry of Copper(I) Supported by a Fluorinated Bis(pyrazolyl)borate

Copper plays an important role in alkyne coordination chemistry and transformations. This report describes the isolation and full characterization of a thermally stable, copper(I) acetylene complex using a highly fluorinated bis(pyrazolyl)borate ligand support. Details of the related copper(I) complex of HC≡CSiMe₃ are also reported. They are three-coordinate copper complexes featuring η²-bound alkynes. Raman data show significant red-shifts in C≡C stretch of [H₂B(3,5-(CF₃)₂Pz)₂]Cu(HC≡CH) and [H₂B(3,5-(CF₃)₂Pz)₂]Cu(HC≡CSiMe₃) relative to those of the corresponding alkynes. Computational analysis using DFT indicates that the Cu(I) alkyne interaction in these molecules is primarily of the electrostatic character. The π-backbonding is the larger component of the orbital contribution to the interaction. The dinuclear complexes such as Cu₂(μ-[3,5-(CF₃)₂Pz])₂(HC≡CH)₂ display similar Cu-alkyne bonding features. The mononuclear [H₂B(3,5-(CF₃)₂Pz)₂]Cu(NCMe) complex catalyzes [3 + 2] cycloadditions between tolyl azide and a variety of alkynes including acetylene. It is comparatively less effective than the related trinuclear copper catalyst {μ-[3,5-(CF₃)₂Pz]Cu}₃ involving bridging pyrazolates.     

Meeting the Challenge of Intermolecular Gold(I)‐Catalyzed Cycloadditions of Alkynes and Allenes

The development of gold(I)‐catalyzed intermolecular carbo‐ and hetero‐cycloadditions of alkynes and allenes has been more challenging than their intramolecular counterparts. Here we review, with a mechanistic perspective, the most fundamental intermolecular cycloadditions of alkynes and allenes with alkenes.     

Bioorthogonal Cycloadditions with Sub‐Millisecond Intermediates

Tetrazine‐ and sydnone‐based click reactions have emerged as important bioconjugation strategies with fast kinetics and N₂ or CO₂ as the only byproduct. Mechanistic studies of these reactions have focused on the initial rate‐determining cycloaddition steps. The subsequent N₂ or CO₂ release from the bicyclic intermediates has been approached mainly through computational studies, which have predicted lifetimes of femtoseconds. In the present study, bioorthogonal cycloadditions involving N₂ or CO₂ extrusion have been examined experimentally at the single‐molecule level by using a protein nanoreactor. At the resolution of this approach, the reactions appeared to occur in a single step, which places an upper limit on the lifetimes of the intermediates of about 80 μs, which is consistent with the computational work.     

Bridge‐Clamp Bis(tetrazine)s with [N]8 π‐Stacking Interactions and Azido‐s‐Aryl Tetrazines: Two Classes of Doubly Clickable Tetrazines

Click chemistry at a tetrazine core is useful for bioorthogonal labeling and crosslinking. Introduced here are two new classes of doubly clickable s‐aryl tetrazines synthesized by Cu‐catalyzed cross‐coupling. Homocoupling of o‐brominated s‐aryl tetrazines leads to bis(tetrazine)s structurally characterized by tetrazine cores arranged face‐to‐face. [N]₈ π‐stacking interactions are essential to the conformation. Upon inverse electron demand Diels–Alder (iEDDA) cycloaddition, the bis(tetrazine)s produce a unique staple structure. The o‐azidation of s‐aryl tetrazines introduces a second proximal intermolecular clickable function that leads to double click chemistry opportunities. The stepwise introduction of fluorophores and then iEDDA cycloaddition, including bioconjugation to antibodies, was achieved on this class of tetrazines. This method extends to (thio)etherification, phosphination, trifluoromethylation and the introduction of various bioactive nitrogen‐based heterocycles.     

Cu Nano particles immobilized on silk‐fibroin as a green and biodegradable catalyst for copper catalyzed azide‐terminal,internal alkynes cycloaddition

Copper immobilized on silk fibroin was successfully prepared and fully characterized using powder X‐ray diffraction, scanning electron microscopy–energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, CHN elemental analysis, and inductively coupled plasma‐atomic emission spectroscopy. Catalytic activity of this catalyst was examined in the azide‐alkyne cycloaddition reaction with internal and terminal alkynes at room temperature under mild conditions. The reusability of the heterogeneous supported Cu catalyst was examined four times without significant loss of catalytic activity.     

Cyclic Multiblock Copolymers via Combination of Iterative Cu(0)‐Mediated Radical Polymerization and Cu(I)‐Catalyzed Azide‐Alkyne Cycloaddition Reaction

Cyclic multiblock polymers with high‐order blocks are synthesized via the combination of single‐electron transfer living radical polymerization (SET‐LRP) and copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). The linear α,ω‐telechelic multiblock copolymer is prepared via SET‐LRP by sequential addition of different monomers. The SET‐LRP approach allows well control of the block length and sequence as A‐B‐C‐D‐E, etc. The CuAAC is then performed to intramolecularly couple the azide and alkyne end groups of the linear copolymer and produce the corresponding cyclic copolymer. The block sequence and the cyclic topology of the resultant cyclic copolymer are confirmed by the characterization of ¹H nuclear magnetic resonance spectroscopy, gel permeation chromatography, Fourier transform infrared spectroscopy, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry.

     

Development of Protein‐Cage‐Based Delivery Nanoplatforms by Polyvalently Displaying β‐Cyclodextrins on the Surface of Ferritins Through Copper(I)‐Catalyzed Azide/Alkyne Cycloaddition

Protein cages are spherical hollow macromolecules that are attractive platforms for the construction of nanoscale cargo delivery vehicles. Human heavy‐chain ferritin (HHFn) is modified genetically to control the number and position of functional groups per cage. 24 β‐CDs are conjugated precisely to the modified HHFn in specific locations through thiol‐maleimide Michael‐type addition followed by copper(I)‐catalyzed azide/alkyne cycloaddition (CuAAC). The resulting human ferritins displaying β‐CDs (β‐CD‐C90 HHFn) can form inclusion complexes with FITC‐AD, which can slowly release the guest molecule reversibly in a buffer solution via non‐covalent β‐CD/AD interactions. β‐CD‐C90 HHFn can potentially be used as delivery vehicles for insoluble drugs.

     

A Study of Graphene‐Based Copper Catalysts: Copper(I) Nanoplatelets for Batch and Continuous‐Flow Applications

The use of graphene derivatives as supports improves the properties of heterogeneous catalysts, with graphene oxide (GO) being the most frequently employed. To explore greener possibilities as well as to get some insights into the role of the different graphenic supports (GO, rGO, carbon black, and graphite nanoplatelets), we prepared, under the same standard conditions, a variety of heterogeneous Cu catalysts and systematically evaluated their composition and catalytic activity in azide–alkyne cycloadditions as a model reaction. The use of sustainable graphite nanoplatelets (GNPs) afforded a stable Cu^I catalyst with good recyclability properties, which are compatible with flow conditions, and able to catalyze other reactions such as the regio‐ and stereoselective sulfonylation of alkynes (addition reaction) and the Meerwein arylation (single electron transfer process).     

CuAAC Click Reactions in the Gas Phase: Unveiling the Reactivity of Bis‐Copper Intermediates

Copper‐catalysed azide alkyne cycloaddition (CuAAC) has been considered a breakthrough transformation over the last 15 years. Its debated mechanism arouses continuously growing interest. By means of a mass spectrometer modified ad hoc, the entire catalytic cycle of CuAAC reaction has been investigated in the gas phase. Ion‐molecule reactions were performed inside the mass spectrometer to reproduce step‐by‐step, at a molecular level, the complete catalytic cycle of the click reaction. We successfully challenged the reactivity of elusive mono‐ and bis‐copper intermediates by ion‐molecule reactions leading to the production of mass‐characterized triazole products, paving the way for detailed energetic studies to be performed in the gas phase. The structures of the relevant species, calculated at a DFT level, helped rationalise our experimental results.