共查询到16条相似文献,搜索用时 62 毫秒
1.
由聚对苯二甲酸乙二酯(PET)和对-乙酰氧基苯甲酸制得的PET/PHB共聚酯代表了一类序列结构较一般二元共聚物复杂的共聚体系.在揭示了这类共聚物与序列分布有关的诸概率参数中只有一个是独立的之后,定义了参数B_q来描述此类共聚物的无规度.并指出,共聚物B_q=b时的序列分布,可以从一般二元共聚物无规度B=b时的序列结构加以推断. 相似文献
2.
3.
对羟基苯甲酸与对苯二甲酸乙二酯的共聚物研究张广利,阎丰琪,李勇,王震,潘景岐,张鸿志(北京大学化学系北京100871)关键词液晶共聚酯,PET/PHB共聚脂,序列分布Jacbon和KuhfuJ’l于70年代报道了对羟基苯甲酸(PHB)一对苯二甲酸乙二... 相似文献
4.
监测了对-乙酰氧基苯甲酸与聚对苯二甲酸乙二醇酯(PET)共缩聚反应过程中HNMR图谱及特性粘度的变化,对乙酰氧基酯交换反应及乙酰脂肪酯的反应活性进行了研究,并研究了以低分子量PET或对苯二甲酸二乙二醇酯为原料时反应中醚键的形成及其进入共聚酯链的规律性。 相似文献
5.
6.
对羟基苯甲酸(PHB)聚对苯二甲酸乙二酯(PET)液晶共聚酯和聚对苯二甲酸乙二酯共混物的酯交换表征 总被引:1,自引:0,他引:1
在温度280℃附近对含有液晶共聚酯P-Hydroxy Benzoic Acid/Poly(-Ethylene Terephthalate-)PHB/PET和Poly(-Ethylene Terephthalate-)PET的共混样品进行热处理时,发现共混物的熔点随热处理的时间增加而不断降低,热处理温度越高,相同时间内共混物熔点下降程度越大;而具有相同热历史的纯PET样品熔点几乎保持不变.通过NMR方法证实了PHB/PET-TET共混物熔点随热处理时间下降是由于PHB/PET和PET之间发生了酯交换反应.所以可根据共混物的宏观热性质和PHB/PET序列结构变化表征PHB/PET和PET共混物之间的酯交换程度. 相似文献
7.
非晶聚对苯二甲酸乙二酯的制备与表征 总被引:1,自引:0,他引:1
通过单体酯交换法和聚 2 ,6 萘二甲酸乙二酯 (PEN)与低分子量PET酯交换的方法分别合成了一系列NPA/TPA/EG和IPA/TPA/EG共聚酯 .随着NPA或IPA单元含量的增加 ,等温结晶速度迅速降低 ,共聚物的结晶性降低甚至非晶化 .由NMR分析得知单体酯交换法与聚合物酯交换法得到的共聚酯NPA/TPA/EG序列分布相近 ,链结构都接近完全无规 .由DSC结果分析 ,随共聚单体含量的增加 ,熔点和熔融热降低 ,结晶度也随之降低 .当NPA或IPA含量达到 2 0 %时 ,可以得到非晶的共聚酯 (APET) .本文还对共聚物组成与结晶温度的关系进行了表征 相似文献
8.
采用差示扫描量热仪和热台偏光显微镜研究了对羟基苯甲酸(PHB)/聚对苯二甲酸丁二酯(PBT)共聚酯的热转变行为和液晶性。结果表明,PHB/PBT共聚酯呈现多重相转变特征,这与共聚酯中存在不同程度的PBT富微区和PHB富微区有关;当PHB链节含量在20%~80%范围时,共聚酯均呈现向列型液晶特征. 相似文献
9.
用Instron3211型毛细管流变仪研究了以对羟枯苯甲酸、对苯二甲酯和双酚为单体合成的共聚芳酯液晶熔体的流变性能。结果表明,切变速率、熔体温度及PHB链节含量对切粘度和结构粘度有很大的影响。 相似文献
10.
11.
12.
In this paper, the sequence structure of TPA/EG/PHB liquid crystalline copolyesters made from different synthetic methods has been studied by ~1H-NMR with the help of computer program of processing peaks. The results showed that the ether bonds were not observed in TPA./EG/PHB copolyesters and the synthetic process had a great effect on their sequence structure. Under certain conditions, the high,random TPA/EG/PHB copolyesters which were considered to have higher performances than PET/xPHB could be obtained. 相似文献
13.
Several novel aromatic liquid crystalline copolyesters with regular sequence structure were prepared by melt Sehotten-Baumann polycondensation via complex monomer. Polarizing microscope with hot stage, thermal analysis and X-ray diffraction were used to investigate the structure and properties of the copolyesters. The effects of structural units, such as flexible spacer, noncolinear meta-linked phenylene unit, crankshaft unit, kink with flexible bridging unit and various substituted benzene rings on melting temperature of aromatic copolyesters were studied and discussed on the basis of crystalline structure of the polymers. 相似文献
14.
THERMAL ANALYSIS AND STRUCTURE STUDIES ON THE BLENDS OF LIQUID CRYSTALLINE COPOLYESTERS AND PET, PBT
The apparent uniform blends of liquid crystalline aromatic copolyesters and semiflexible polyesters PET or PBT were obtained by mechanical mixing in the molten state within certain range of composition.The effects of blending with liquid crystalline components on the structure of homopolyester matrix were examined by thermal analysis and X-ray diffraction. These results suggest that the LC component in the blend may possibly be acting as a nucleating agent, or it may induce axial orientation of molecules promoting the local ordering of matrix. For the blends of PET, these influences mainly display in narrowing the width of cold crystalline peak and enhancing the main peak of x-ray diffraction; and for the blends of PBT, the pre-melting crystalline peak was enhanced. 相似文献
15.
16.
Flexible oxyethylene-ether was introduced into the aromatic copolyesters and copoly(es-ter-amide)s to reduce the melting point of resulting polymers. The melting point was greatlyreduced to 200℃ or even lower in some cases, and the molecular weight was satisfactorilyhigh as reflected by inherent viscosity. The polymers exhibited high thermal stability and goodmechanical properties as determined by TGA and mechanical tests. The copolyester showedbetter crystallinity and liquid crystallinity than corresponding copoly(ester-amide)s with simi-lar monomer composition as reflected by POM observation and WAXD study. The meltingpoints for both copolyesters and copoly (ester-amide)s showed great dependence on the p-acetoxybenzoic acid (PAB) content in monomer composition and reached the lowest valuewhen PAB was 29 mol%. 相似文献