Effect of the production temperature on the structure of Si<Subscript>3</Subscript>N<Subscript>4</Subscript> nanofibers

The effect of the production temperature on the morphology and structure of Si₃N₄ nanofibers was investigated. It was shown that nanofibers produced in the temperature range of 1340–1360°C are amorphous while those produced at 1380°C and above are monocrystalline. Apart from the principal phase (α-Si₃N₄) the imide Si₂N₂NH was also found in the reaction products.     

The Role of Y<Subscript>2</Subscript>O<Subscript>3</Subscript> and MgO Additives on the Photoluminescence Properties of Si<Subscript>3</Subscript>N<Subscript>4</Subscript> Nanoparticles

The current research addressed synthesizing and studying photoluminescence studies of β-Si₃N₄ nanoparticles. The effect of MgO and Y₂O₃ as the typical additives on photoluminescence behaviour was evaluated. The β-Si₃N₄ with MgO and Y₂O₃ additive specimens were fabricated by a solid state technique (ball-milled method). The as-prepared products were characterized by X-ray diffraction technique, transmission electron microscopy, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and Raman analysis. The results showed that after ball-milled process, hexagonal β-Si₃N₄ with MgO or Y₂O₃ as the additives with the size distribution of 45–50 nm was obtained. The optical properties of the as-synthesized product were also investigated by photoluminescence and diffuse reflection spectroscopy. The obtained results confirmed that employing MgO as an additive, in comparison to the Y₂O₃, could enhance emission properties in the synthesized silicon nitride nanoparticles. The obtained results also showed that MgO–Si₃N₄ pair acted as FRET system to enhance the emission intensity of β-Si₃N₄ nanoparticles.     

Phase formation in the FeVO<Subscript>4</Subscript>–Co<Subscript>3</Subscript>V<Subscript>2</Subscript>O<Subscript>8</Subscript> system

Phase relations in the solid state in the FeVO₄–Co₃V₂O₈ system, in the whole range of components concentration have been studied. It was found that the composition of the phase of the howardevansite type structure, formed in the investigated system, corresponds with the Co_2.616Fe_4.256V₆O₂₄ formula. The phase of the lyonsite type structure has a homogeneity range with the Co_3+1.5xFe_4–xV₆O₂₄ formula (0.476 formula (0.476<x<1.667). The melting temperature and the volume of the unit cell of the lyonsite type structure phase increases together with the rise of cobalt quantity contained in it. Basing on the results of the DTA and XRD measurements a phase diagram of the FeVO_4–Co₃V₂O₈ system up to the solidus line was constructed.     

XAFS investigation of [Pd(NH<Subscript>3</Subscript>)<Subscript>4</Subscript>][AuCl<Subscript>4</Subscript>]<Subscript>2</Subscript> and its thermolysis products

Thermolysis of double complex salt [Pd(NH₃)₄][AuCl₄]₂ has been studied in helium atmosphere from ambient to 350 °C. The XAFS of Pd K and Au L₃ edges and thermogravimetry measurements have been carried out to characterize the intermediates and the final product. In the temperature range 115–160 °C the complex is decomposed to form Pd(NH₃)₂Cl₂ and AuCl_4−x N _x species with x ranging from 2 to 3. Subsequent heating of the intermediate up to 300 °C leads to the total loss of NH₃. The Au–Cl and Au–Au bonds form the local environment of Au at the stage of decomposition while only four chlorine atoms are around Pd. At the temperature of 330 °C the Au and Pd nanoparticles as well as residues of palladium chloride are detected. The final product consists of separated Au and Pd nanoparticles.     

Effect of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> addition on structure and magnetic properties of Ni<Subscript>0.5</Subscript>Zn<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanofibers

Ni_0.5Zn_0.5Fe₂O₄ nanofibers with addition of 0–5 wt% Bi₂O₃ were synthesized by calcination of the electrospun polyvinylpyrrolidone/inorganic composite nanofibers at the temperature below the melting point of Bi₂O₃. The effects of Bi₂O₃ addition on the phase structure, morphology and magnetic properties of the nanofibers were investigated by means of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, selected area electron diffraction and vibrating sample magnetometer. It is found that the nanofiber diameter, crystallite size and magnetic parameters can be effectively tuned by simply adjusting the amount of Bi₂O₃ addition. The average diameter of Ni_0.5Zn_0.5Fe₂O₄ nanofibers doped with different contents of Bi₂O₃ ranges from 40 to 63 nm and gradually decreases with increasing Bi₂O₃ content. The addition of Bi₂O₃ does not induce the phase change and all the samples are a single-phase spinel structure. The amorphous Bi₂O₃ tends to concentrate on the nanoparticle surface and/or grain boundary and can retard the particles motion as well as the grain growth, resulting in a considerable reduction in grain size compared to the pristine sample. The specific saturation magnetization and coercivity of the nanofibers gradually decrease with the increase of Bi₂O₃ amount. Such behaviors are explained on the basis of chemical composition, surface effect, domain structure and crystal anisotropy.     

Non-isothermal kinetics of the thermal decomposition of sodium oxalate Na<Subscript>2</Subscript>C<Subscript>2</Subscript>O<Subscript>4</Subscript>

The thermal transformation of Na₂C₂O₄ was studied in N₂ atmosphere using thermo gravimetric (TG) analysis and differential thermal analysis (DTA). Na₂C₂O₄ and its decomposed product were characterized using a scanning electron microscope (SEM) and the X-ray diffraction technique (XRD). The non-isothermal kinetic of the decomposition was studied by the mean of Ozawa and Kissinger–Akahira–Sunose (KAS) methods. The activation energies (E _α) of Na₂C₂O₄ decomposition were found to be consistent. Decreasing E _α at increased decomposition temperature indicated the multi-step nature of the process. The possible conversion function estimated through the Liqing–Donghua method was ‘cylindrical symmetry (R₂ or F_1/2)’ of the phase boundary mechanism. Thermodynamic functions (ΔH*, ΔG* and ΔS*), calculated by the Activated complex theory and kinetic parameters, indicated that the decomposition step is a high energy pathway and revealed a very hard mechanism.     

Influence of H<Subscript>2</Subscript>O and SO<Subscript>2</Subscript> on the activity of deposited cobalt oxide catalysts in the processes of reduction of nitrogen(I), (II) oxides with carbon monoxide and C<Subscript>3</Subscript>-C<Subscript>4</Subscript> alkanes

It is shown that palladium–cobalt oxide–cerium catalyst deposited on cordierite catalyzes the reduction of nitrogen(II) oxide with carbon monoxide, and cobalt–iron catalysts in simultaneous reduction of NO + N₂O with C₃-C₄ alkanes retained high activity in the presence of water vapor and sulfur dioxide. The Pd-Co₃O₄/cordierite catalyst exceeds the Pt-Co₃O₄/codierite catalyst in the conversion of NO and CO in the reaction mixture CO + NO + O₂ + H₂O + SO₂. Modification of the Pd-Co₃O₄/cordierite with cerium oxide considerably increases its sulfur resistance.     

Synthesis and crystallization kinetics of the novel ion exchanger Na<Subscript>4</Subscript>Ti<Subscript>4</Subscript>Si<Subscript>3</Subscript>O<Subscript>10</Subscript> for cesium removal

Thermodynamics and crystallization kinetics of the hydrothermal synthesis of Na₄Ti₄Si₃O₁₀ (NaTS) were systemically studied by both experiments and model simulation. Experimental results showed that the curve of crystallinity with time was a characteristic signmoid in the shape that indicated the crystallization of Na₄Ti₄Si₃O₁₀ was a typical spontaneous nucleation process on the laboratory scale. Crystallization of NaTS belongs to the liquid-liquid transformation mechanism and the reaction is endothermic (ΔH = 15.3 kJ/mol). A mathematic model of crystallization kinetics was developed to simulate the synthesis of NaTS. Runge-Kutta and simplex methods were adopted to solve the partial differential equations. Model results fitted well with the experimental data and showed that the synthesis process belongs to spontaneous nucleation and crystal growth. Moreover, the very small crystal growth constant (5.6·10⁻⁷) and gel dissolution constant (7.0·10⁻⁷) indicate they are the rate-limiting steps of the whole synthesis process.     

Synthesis and optical property of NaTaO<Subscript>3</Subscript> nanofibers prepared by electrospinning

This paper describes a procedure of preparing sodium tantalite nanofibers for the first time. Sodium tantalite nanofibers were synthesised by electrospinning a sol–gel precursor solution of poly(vinyl pyrrolidone)/sodium tantalite, followed by careful sintering of the as-electrospun composite fibers at 550 °C for 3 h. The morphology, microstructure and crystal phase were investigated by transmission electron microcopy and X-ray diffraction. The optical property was characterized by ultraviolet–visible (UV–vis) spectrometer. Typical nanofibers were with diameter between 70 and 90 nm and length exceeding 0.1 mm. An unusual phenomenon, the red-shift of optical absorption band edge happened, indicated the fabricated NaTaO₃ nanofibers were potential good candidates for photocatalytic application. The experiment photodegradation of methylene blue by NaTaO₃ nanofibers under UV light irradiation was performed.     

Preparation of novel visible-light-driven In<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaIn<Subscript>2</Subscript>O<Subscript>4</Subscript> composite photocatalyst by sol–gel method

Novel visible-light-activated In₂O₃–CaIn₂O₄ photocatalysts were developed in this paper through a sol–gel method. The photocatalytic activities of In₂O₃–CaIn₂O₄ composite photocatalysts were investigated based on the decomposition of methyl orange under visible light irradiation (λ > 400 nm). The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrum (EDS), X-ray photoelectron spectroscopy (XPS) and UV–vis diffused reflectance spectroscopy (DRS). The results revealed that the In₂O₃–CaIn₂O₄ composite samples with different In₂O₃ and CaIn₂O₄ content can be obtained by controlling the synthesis temperature, and the composite photocatalysts extended the light absorption spectrum toward the visible region. The photocatalytic tests indicated that the composite samples demonstrated high visible-light activity for decomposition of methyl orange. The significant enhancement in the In₂O₃–CaIn₂O₄ photo-activity under visible light irradiation can be ascribed to the efficient separation of photo-generated carriers in the In₂O₃ and CaIn₂O₄ coupling semiconductors.     

Theoretical study of the gas-phase Fe<Superscript>+</Superscript>-mediated oxidation of ethane by N<Subscript>2</Subscript>O

We report herein a comprehensive study of the gas-phase Fe⁺-mediated oxidation of ethane by N₂O on both the sextet and quartet potential energy surfaces (PESs) using density functional theory. The geometries and energies of all the relevant stationary points are located. Initial oxygen-atom transfer from N₂O to iron yields FeO⁺. Then, ethane oxidation by the nascent oxide involves C–H activation forming the key intermediate of (C₂H₅)Fe⁺(OH), which can either undergo C–O coupling to Fe⁺ + ethanol or experience β-H shift giving the energetically favorable product of FeC₂H₄ ⁺ + H₂O. Reaction of FeC₂H₄ ⁺ with another N₂O constitutes the third step of the oxidation. N₂O coordinates to FeC₂H₄ ⁺ and gets activated by the metal ion to yield (C₂H₄)Fe⁺O(N₂). After releasing N₂ through the direct H abstraction and/or cyclization pathways, the system would be oxidized to ethenol, acetaldehyde, and oxirane, regenerating Fe⁺. Oxidation to acetaldehyde along the cyclization –C–to–C hydrogen shift pathway is the most energetically favored channel.     

Electrical conductivity studies in the system Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript>-Li<Subscript>1.33</Subscript>Ti<Subscript>1.67</Subscript>O<Subscript>4</Subscript>

Electrical conductivity in the monoclinic Li₂TiO₃, cubic Li_1.33Ti_1.67O₄, and in their mixture has been studied by impedance spectroscopy in the temperature range 20–730 °C. Li₂TiO₃ shows low lithium ion conductivity, σ₃₀₀≈10^–6 S/cm at 300 °C, whereas Li_1.33Ti_1.67O₄ has 3×10^–8 at 20 °C and 3×10^–4 S/cm at 300 °C. Structural properties are used to discuss the observed conductivity features. The conductivity dependences on temperature in the coordinates of 1000/T versus log_e(σT) are not linear, as the conductivity mechanism changes. Extrinsic and intrinsic conductivity regions are observed. The change in the conductivity mechanism in Li₂TiO₃ at around 500–600 °C is observed and considered as an effect of the first-order phase transition, not reported before. Formation of solid solutions of Li_{2– x} Ti_{1+ x} O₃ above 900 °C significantly increases the conductivity. Irradiation by high-energy (5 MeV) electrons causes defects and the conductivity in Li₂TiO₃ increases exponentially. A dose of 144 MGy yields an increase in conductivity of about 100 times at room temperature. Electronic Publication     

Synthesis and structure of the polymeric complex [Ag<Subscript>2</Subscript>(Ph<Subscript>3</Subscript>P)<Subscript>2</Subscript>B<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

A method for the synthesis of the silver(I) complex with the closo-decaborate anion and triphenylphosphine [Ag₂(Ph₃P)₂B₁₀H₁₀] _n was developed and the structure of this complex was studied. The polymeric chain of the complex is formed with participation of Ag(I) atoms, which coordinate the B₁₀H₁₀²⁻ anions through the apical (B(1)–B(2), B(9)–B(10)) and equatorial (B(3)–B(6), B(5)–B(8)) edges, the metalligand bonding occurring through three-center two-electron bonds (MHB). The P atoms of two triphenylphosphine molecules are also incorporated in the inner coordination sphere of the metal: the CN of the silver atom is 4 + 1.     

Chemical composition optimization and characterization of the NiO/B<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> system as a catalyst for ethylene oligomerization

The samples of the NiO/B₂O₃-Al₂O₃ system with NiO contents from 0.48 to 38.30 wt % were synthesized by the impregnation of borate-containing alumina (20 wt % B₂O₃). It was found that nickel oxide occurred in an X-ray amorphous state in the samples containing to 23.20 wt % NiO. At a NiO content of 4.86 wt % or higher, the support was blocked by the modifier to cause a decrease in the specific surface area from 234 to 176 m²/g and in the amount of acid sites from 409–424 to 333 μmol/g. An extremal character of the dependence of catalyst activity in ethylene oligomerization on NiO content was found with a maximum in the range of 4.86–9.31 wt %. Based on spectroscopic data, it was found that ethylene activation on the NiO/B₂O₃-Al₂O₃ catalyst can be associated with the presence of Ni²⁺ cations, which chemically interact with the support. The catalyst containing 4.86 wt % NiO at 200°C, a pressure of 4 MPa, and an ethylene supply rate of 1.1 h⁻¹ provided almost complete ethylene conversion at the yield of liquid oligomerization products to 90.0 wt %; the total concentration of C⁸⁺ alkenes in these products was 89.0 wt %.     

Structure and lithium mobility of Li<Subscript>4</Subscript>Pt<Subscript>3</Subscript>Si

The lithium-rich silicide Li₄Pt₃Si was synthesised from the elements by high-temperature synthesis in a sealed niobium ampoule. Its structure was refined on the basis of single-crystal X-ray diffraction data: R32, a = 693.7(2), c = 1627.1(4) pm, wR2 = 0.0762, 525 F² values and 21 variables. The striking structural motifs of the Li₄Pt₃Si structure are silicon atoms with a slightly distorted trigonal prismatic platinum coordination with short Si–Pt distances (238–246 pm). Always two trigonal prisms are condensed via a common Pt₃ triangle, and these double units built up a three-dimensional network by condensation via common corners. The channels left by this prismatic network are filled by two crystallographically independent lithium sites in a 3:1 ratio. The single crystal X-ray data were fully confirmed by neutron powder diffraction and ⁷Li magic-angle spinning (MAS)–nuclear magnetic resonance (NMR) results. The two distinct lithium sites are well differentiated by their ⁷Li isotropic chemical shift and nuclear electric quadrupolar interaction parameters. MAS-NMR spectra reveal signal coalescence effects above 300 K, indicating chemical exchange between the lithium sites on the millisecond timescale. The spectra can be simulated with a simple two-site exchange model. From the resulting temperature-dependent correlation times, an activation energy of 50 kJ/mol is extracted.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Crystal structures of [Hg(<Emphasis Type="Italic">N</Emphasis>-ethylthiourea)<Subscript>2</Subscript>(CN)<Subscript>2</Subscript>] and [Hg(<Emphasis Type="Italic">N</Emphasis>-propylthiourea)<Subscript>2</Subscript>(CN)<Subscript>2</Subscript>]

Two mercury(II) cyanide complexes of N-ethylthiourea (Ettu) and N-propylthiourea (Prtu) ligands, [Hg(Ettu)₂(CN)₂] (1) and [Hg(Prtu)₂(CN)₂] (2), were prepared and their crystal structures were determined by X-ray crystallography. In both structures, the mercury atom is coordinated to two sulfur atoms of thioureas and two cyanide carbon atoms in a pseudo-tetrahedral mode with the bond angles in the range of 90.52(11)–162.2(3)°. The structures are stabilized by N-H—S, N-H—N, and C-H—N intramolecular and intermolecular hydrogen bonds.     

TiO<Subscript>2</Subscript> nanofibers embedding single crystalline TiO<Subscript>2</Subscript> nanowires

Epitaxially grown titanium dioxide (TiO₂) nanofibers embedding single crystalline TiO₂ nanowires (NWs) were successfully fabricated by electropinning poly(vinyl pyrrolidone)/ethanol solutions mixed with hydrothermally synthesized TiO₂ NWs and titanium isopropoxide precursors and subsequently calcinating the electrospun nanofibers. Utilizing scanning electron microscopy (SEM) and transmission electron microscopy (TEM), the morphologies of TiO₂ NWs and nanofibers were investigated. High resolution TEM (HR-TEM) and selected area electron diffraction (SAED) allowed us to indentify the fact that, during the calcination process under the optimized condition, titanium isopropoxide precursors were epitaxially crystallized on the surface of single crystalline TiO₂ NWs. Based on the X-ray diffraction (XRD) experiments, it was also realized that the crystalline structure of hydrothermally synthesized TiO₂ NWs and epitaxially crystallized TiO₂ nanofibers is anatase and that TiO₂ composite nanofibers embedding TiO₂ NWs exhibited a higher crystallinity than the pristine TiO₂ nanofibers. Additionally, ultraviolet visible (UV–Vis) spectra of nanofibers indicated that optical properties of TiO₂ nanofibers can be tuned by introducing the single crystalline TiO₂ NWs.     

Synthesis and alkylation of n<Subscript>(3)</Subscript>-aryl-n<Subscript>(5)</Subscript>-phenyl-6-amino-4-aryl(2-furyl)-2-thioxo-1,2,3,4-tetrahydropyridine-3,5-dicarboxamide

N₍₃₎-Aryl-N₍₅₎-phenyl-6-amino-4-aryl(2-furyl)-2-thioxo-1,2,3,4-tetrahydropyridine-3,5-dicarboxamides have been obtained by the interaction of N-phenyl-3-aryl(2-furyl)-2-cyanoacrylamides with 3-amino-3-thioxopropananilides under the conditions of the Michael reaction. N₍₃₎-Aryl-N₍₅₎-phenyl-2-alkylthio-6-amino-4-aryl(2-furyl)-3,4-dihydropyridine-3,5-dicarboxamides and N₍₃₎, N₍₅₎-diphenyl-6-benzylthio-4-(2-furyl)-2-oxo-1,2,3,4-tetrahydropyridine-3,5-dicarboxamides were synthesized by alkylation of the products. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 1018–1023, July, 2008.     

LaNi<Subscript>0.5</Subscript>Ti<Subscript>0.5</Subscript>O<Subscript>3</Subscript>/CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>-based sensor for sensitive determination of paracetamol

A novel electrochemical sensor based on LaNi_0.5Ti_0.5O₃/CoFe₂O₄ nanoparticle-modified electrode (LNT–CFO/GCE) for sensitive determination of paracetamol (PAR) was presented. Experimental conditions such as the concentration of LNT–CFO, pH value, and applied potential were investigated. Under the optimum conditions, the electrochemical performances of LNT–CFO/GCE have been researched on the oxidation of PAR. The electrochemical behaviors of PAR on LNT–CFO/GCE were investigated by cyclic voltammetry. The results showed that LNT–CFO/GCE exhibited excellent promotion to the oxidation of PAR. The over-potential of PAR decreased significantly on the modified electrode compared with that on bare GCE. Furthermore, the sensor exhibits good reproducibility, stability, and selectivity in PAR determination. Linear response was obtained in the range of 0.5 to 901 μM with a detection limit of 0.19 μM for PAR.