Hemiesters and hemiamides of maleic and succinic acid: synthesis and application of surfactants in emulsion polymerization with styrene and butyl acrylate

Hemiesters and hemiamides of maleic acid with different chain lengths of the hydrophobic alkyl group (R = C₈H₁₇, C₁₀H₂₁, C₁₂H₂₅, C₁₆H₃₃) have been synthesized and used as surfactants in the emulsion polymerization of styrene and butyl acrylate. The same polymerization experiments were also carried out using nonreactive surfactants with an analogous succinic structure. The chemical structure of the surfactants was confirmed by 1H nuclear magnetic resonance. The melting point and critical micelle concentration of the reactive surfactants described herein were measured. All of the surfactants studied provided good stability of styrene/butyl acrylate latexes, when compared with a reference latex of a styrene/butyl acrylate copolymer prepared with a surfactant sodium dodecyl sulfate. The amount of surfactant grafted onto the particles of the final latex was estimated by conductimetric titration. Between 33 and 68% of surfactant used in emulsion polymerization was found on the surface of latex particles. Electrolyte addition at high concentration and freeze/thaw cycle cause flocculation of latexes. Copyright © 1999 John Wiley & Sons, Ltd.     

EMULSION POLYMERIZATION AS A METHOD FOR THE DETERMINATION OF THE CRITICAL MICELLE CONCENTRATION OF SURFACTANTS OF LOW SOLUBILITY IN WATER +

Although a large number of methods are available for the determination of critical micelle concentrations many of these cannot be applied to the highest members of homologous series which are insufficiently soluble in water. The number of latex particles formed and consequently the rate of emulsion polymerization of such monomers as styrene which have only a very low solubility In water increase rapidly at the c.m.c. of the surfactant. When the surfactant is a salt which can be formed at the interface by dissolving the long-chain acid in the monomer and a slight excess of alkali in the water, observation of surfactant concentration at which this increase in particle number and polymerization rate takes place provides an experimental method for the determination of the c.m.c. which gives results in good agreement with expectation based on an extrapolation of results obtained by other methods on lower members of the series in the case of potassium docosanoate.     

A Study of the Solubilization of Polar Oily Materials by Alkyl Polyglucoside and Sodium Dodecyl Sulfate in Mixed Surfactant System

The effects of different alkyl chains of nonionic surfactants and solubilized polar oily material on the solubilizing capacity of binary anionic‐nonionic mixed surfactant systems were studied. This system includes surface tension measurements to determine the critical micelle concentration. Results were analyzed using regular solution theory to obtain the mixed micelle and the interaction parameter β, in order to evaluate the type of interactions of surfactants in the mixed micelle. Solubilizing capacity has been investigated by measuring the optical density of solubilized polar oily materials like octanol, decanol, and dodecanol. The solubilizing phenomenon exhibited by mixed surfactants systems showed better results than that of the individual surfactant system. The amount of solubilization in mixed surfactant increases with increase in carbon chain length of alkyl polyglucoside.     

Removal of solvent-based ink from printed surface of HDPE bottles by alkyltrimethylammonium bromides: effects of surfactant concentration and alkyl chain length

Three alkyltrimethylammonium bromides (i.e., dodecyl-, tetradecyl-, and hexadecyltrimethylammonium bromide or DTAB, TTAB, and CTAB, respectively) were used to remove a blue solvent-based ink from a printed surface of high-density polyethylene bottles. Either an increase in the alkyl chain length or the surfactant concentration was found to increase the deinking efficiency. Complete deinking was achieved at concentrations about 3, 8, and 24 times of the critical micelle concentration (CMC) of CTAB, TTAB, and DTAB, respectively. For CTAB, ink removal started at a concentration close to or less than its CMC and increased appreciably at concentrations greater than its CMC, while for TTAB and DTAB, significant deinking was only achieved at concentrations much greater than their CMCs. Corresponding to the deinking efficiency of CTAB in the CMC region, the zeta potential of ink particles was found to increase with increasing alkyl chain length and concentration of the surfactants, which later leveled off at some higher concentrations. Wettability of the surfactants on an ink surface increased with increasing alkyl chain length and concentration of the surfactants. Lastly, solubilization of ink binder in the surfactant micelles was found to increase with increasing alkyl chain length and surfactant concentration. We conclude that adsorption of surfactant on the ink pigment is crucial to deinking due to modification of wettability, zeta potential, pigment/water interfacial tension, and dispersion stability. Solubilization of binder (epoxy) into micelles is necessary for good deinking because the dissolution of the binder is required before the pigment particles can be released from the polymer surface.     

Characterization of the aggregates of N-alkyl-N-methylpyrrolidinium bromide surfactants in aqueous solution

We have characterized a new class of surfactant molecules using fluorescence spectroscopic and light-scattering techniques. Our results suggest that this homologous series of N-alkyl-N-methlypyrrolidinium bromide (CnMPB) surfactants with n = 10, 12, 14, 16, and 18 represents a bridge between the well-characterized alkyltrimethylammonium bromide (CnTAB) and dialkyldimethylammonium bromide (di-CnDAB) surfactant series. For the smaller members of the CnMPB series with n = 10, 12, and 14, our results are consistent with the formation of spherical micelles as the surfactant concentration is increased. With increasing alkyl chain length, we observe that the critical micelle concentration decreases and the aggregation number increases, typical of single-tail surfactants. For C16MPB, the formation of micelles at dilute concentrations (0.10 mM) is likely, followed by the coexistence of micelles and small unilamellar vesicles at higher concentrations up to 0.82 mM where only vesicles are present. For C18MPB, our data are consistent with the formation of vesicles only. We demonstrate in this study that the combination of spectroscopic and light-scattering methods is a powerful approach to reveal aspects of aggregate structure and morphology in aqueous CnMPB surfactant systems. In particular, the sensitivity of the fluorescence probe prodan to the polarity of its microenvironment enables the rich complexity of surfactant aggregates exhibited by this series of amphiphilic molecules to be detected.     

Synthesis and Applications of Alkylbenzene Sulfonate Gemini Surfactants

A series of anionic Gemini surfactants with the same structure except for the spacer and side chain length of the alkylbenzene sulfonate were synthesized based on dodecyl benzene and toluene. The structures of the compounds were confirmed by infrared and nuclear magnetic resonance spectroscopy, and elemental analyses. The effect of spacer and side chain length on the interfacial tension of Gemini surfactant solution was investigated by comparison of the critical micelle concentration (cmc) of the surfactants in aqueous solution using the drop volume method, and the surface tension at the cmc (γcmc). The Gemini surfactant with the best properties was used as emulsifier in emulsion polymerization of methyl methacrylate, and its foam stability was also determined.     

Microcalorimetric study on micellization of nonionic surfactants with a benzene ring or adamantane in their hydrophobic chains

The micellization of a novel family of nonionic surfactants poly(oxyethylene) glycol alkyl ethers has been studied by microcalorimetry. One of the surfactants has adamantane, and the other nonionic surfactants have a benzene ring in their hydrophobic chains, which moves from the terminal of the hydrophobic chain toward the headgroup. Moreover, the alkyl chain of the nonionic surfactants is straight or branched. Both the critical micelle concentration (cmc) and the thermodynamic parameters associated with the micelle formation have been obtained. The cmc decreases and the enthalpy of micelle formation (deltaH(mic)) becomes less positive gradually as the length of hydrophobic chain increases, whereas the values of cmc and deltaH(mic) tend to increase for the surfactants with a longer ethylene oxide chain. However, the deltaH(mic) value of the surfactant with seven carbon atoms in a hydrophobic chain is more positive than that of the surfactant with six carbon atoms in a hydrophobic chain. Comparing with the nonionic surfactant with a methylene hydrophobic chain, the surfactants with benzene rings and adamantane groups have larger cmc values and the cmc values increase with the size of the groups. Furthermore, moving the phenyl group from the terminal of the hydrophobic chain to the neighbor of the hydrophilic headgroup leads to the decreased cmc. Both the variation of hydrophobic interaction from the movement of phenyl group and pi-pi interaction among adjacent phenyl groups affect deltaH(mic) values.     

Aggregation of sodium 1-(n-alkyl)naphthalene-4-sulfonates in aqueous solution: micellization and microenvironment characteristics

In aqueous solution, the micellization and microenvironment characteristics of the micelle assemblies of three anionic surfactants, sodium 1-(n-alkyl)naphthalene-4-sulfonates (SANS), have been investigated by steady-state fluorescence and time-resolved fluorescence decay techniques using pyrene, Ru(bpy)3(2+), and 1,6-diphenyl-1,3,5-hexatriene as fluorescence probes. The critical micelle concentrations (cmc's), effective carbon atom numbers (neff's), hydrophilic-lipophilic balances (HLBs), mean micelle aggregation numbers, micropolarities, and microviscosities of these surfactant micelles have been determined. The logarithmic cmc of the alkylnaphthalene sulfonates decreases linearly with an increase in the neff. The logarithmic aggregation number of the alkylnaphthalene sulfonates increases linearly with an increase in the neff. However, in contrast to the alkylsufonates and the alkylbenzene sulfonates, the aggregation for these alkylnaphthalene sulfonate molecules is less sensitive to the increase in the neff. The micropolarity of these alkylnaphthalene sulfonate micelles is less sensitive to the increase in the alkyl chain length and is lower than that of sodium dodecyl sulfate (SDS). The microviscosity of these alkylnaphthalene sulfonate micelles increases with an increase in the alkyl chain length and is lower than those of nonionic surfactants and zwitterionic surfactants. These results suggest that naphthyl rings have a notable effect on the micellization of SANS.     

Enhanced interfacial properties of novel amino acid-derived surfactants: Effects of headgroup chemistry and of alkyl chain length and unsaturation

Amino acid-derived surfactants have increasingly become a viable biofriendly alternative to petrochemically based amphiphiles as speciality surfactants. Herein, the Krafft temperatures and critical micelle concentrations (cmc) of three series of novel amino acid-derived surfactants have been determined by differential scanning microcalorimetry and surface tension measurements, respectively. The compounds comprise cationic molecules based on serine and tyrosine headgroups and anionic ones based on 4-hydroxyproline headgroups, with varying chain lengths. A linear dependence of the logarithm of cmc on chain length is found for all series, and in comparison to conventional ionic surfactants of equal chain length, the new amphiphiles present lower cmc and lower surface tension at the cmc. These observations highlight their enhanced interfacial performance. For the 18-carbon serine-derived surfactant the effects of counterion change and of the presence of a cis-double bond in the alkyl chain have also been investigated. The overall results are discussed in terms of headgroup and alkyl chain effects on micellization, in the light of available data for conventional surfactants and other types of amino acid-based amphiphiles reported in the literature.     

Solubilization of two organic dyes by cationic ester-containing gemini surfactants

Solubilization of two different types of organic dyes, Quinizarin with an anthraquinone structure and Sudan I with an azo structure, has been studied in aqueous solutions of a series of cationic gemini surfactants and of a conventional monomeric cationic surfactant, dodecyltrimethylammonium bromide (DTAB). Surfactant concentrations both above and below the critical micelle concentration were used. The concentration of solubilized dye at equilibrium was determined from the absorbance of the solution at λ(max) with the aid of a calibration curve. The solubilization power of the gemini surfactants was higher than that of DTAB and increased with increasing alkyl chain length. An increase in length of the spacer unit resulted in increased solubilization power while a hydroxyl group in the spacer did not have much effect. Ester bonds in the alkyl chains reduced the solubilization power with respect to both dyes. A comparison between the absorbance spectra of the dyes in micellar solution with spectra in a range of solvents of different polarity indicated that the dye is situated in a relatively polar environment. One may therefore assume that the dye is located just below the head group region of the micelle. Attractive π-cation interactions may play a role for orienting the dye to the outer region of the micelle.     

Adsorption of complexes formed by cationic starch and anionic surfactants on quartz studied by QCM-D

The adsorption of complexes of cationic starch, (CS) and a series of homologous sodium alkanoates on silica was studied with the quartz crystal microbalance with dissipation (QCM-D) instrument. The systems were chosen so as to represent CS/surfactant ratios below and above the critical association concentrations of the surfactants but below their critical micelle concentrations. It was found that

– surfactants did not adsorb on cationic polymers that were very tightly bound to the surface;

– surfactants did adsorb on polyelectrolytes forming layers with loops and tails extending into the solution, provided the concentration of surfactant was at least around the critical association concentration (cac) of the surfactant/polymer system;

– adsorption of surfactant was promoted by increasing the surfactant chain length and by adding simple electrolyte that weakened the electrostatic polymer/surface interaction and

– multilayers were formed when the surfactant concentration in solution was well above the cac; their formation was promoted by increasing hydrophobic interactions, e.g. by increasing the surfactant chain length.

Hydrolysis of 2,4-Dinitrochlorobenzene Catalyzed by Cationic Micelles

Micellar catalysis by nine cationic surfactants of the basic hydrolysis of 2,4-dinitrochlorobenzene(DNCB) was studied. The results obtained are as follows: (I) The second-order constants k₂ for the hydrolysis reaction of DNCB catalized by the cationic micelles increase by a factor of 11–100 than that in water. Plots of k₂ against the surfactant concentration show an S-type curve, and the catalytic effect is observed below the critical micelle concentration(CMC) of the surfactants. (2) For a series of surfactants, there is an optimal chain length for the alkyl of the surfactants to show the greatest catalytic effect. (3) The hydrolysis rate of DNCB decreases as the base concentration increases. (4) For the surfactants with the same hydrophilic and hydrophobic groups, chlorides have advantage over bromides in enhancing the reaction rate. These results can be interpreted in term of the changes in CMC, micelle size, solubilization capacity of the micelles, binding degree of counterion et al.     

Effect of the alkyl chain length on micelle formation for bis(N-alkyl-N,N-dimethylethylammonium)ether dibromides

Dimeric alkylammonium salts – gemini surfactants – due to their unusual very low critical micelle concentration and minimal inhibitory concentration are subject to intensive research as surface active and antimicrobial compounds. Thanks to the presence of two positively charged nitrogen atoms and a large molecular surface, gemini surfactants are also very efficient corrosion inhibitors. To strengthen the electrostatic adsorption of ammonium cations on a metal surface, which is a key parameter in the inhibition of corrosion, heteroatoms (O, S, N, or P) and π-electron systems can be introduced into the gemini surfactant structure to increase chemical adsorption. In this study, we investigated the relationship between the alkyl chain length and critical micelle concentration for gemini surfactants containing an oxygen atom in the spacer, that is, bis(N-alkyl-N,N-dimethylethylammonium)ether dibromides, for potential use as corrosion inhibitors.     

Adsorption of alkyl polyglucosides on the solid/water interface: equilibrium effects of alkyl chain length and head group polymerization

The equilibrium adsorption behavior of two n-alkyl-beta-D-glucosides (octyl (C8G1) and decyl (C10G1)) and four n-alkyl-beta-D-maltosides (octyl (C8G2), decyl (C10G2), dodecyl (C12G2), and tetradecyl (C14G2)) from aqueous solution on a titania surface, as measured by ellipsometry, has been investigated. The main focus has been on the effect of changes in the alkyl chain length and headgroup polymerization, but a comparison with their adsorption on the silica/water and air/water interfaces is also presented. Some comparison with the corresponding adsorption of ethylene oxide surfactants, in particular C10E6 and C12E6, is given as well. For all alkyl polyglucosides, the maximum adsorbed amount on titania is reached slightly below the critical micelle concentration (cmc), where it levels off to a plateau and the amount adsorbed corresponds roughly to a bilayer. However, there is no evidence that this is the actual conformation of the surfactant assemblies on the surface, but the surfactants could also be arranged in a micellar network. On hydrophilic silica, the adsorbed amount is a magnitude lower than on titania, corresponding roughly to a layer of surfactants lying flat on the surface. A change in the alkyl chain length does not result in any change in the plateau molar adsorbed amount at equilibrium; however, the isotherm slope for the alkyl maltosides increases with increasing chain length. Headgroup polymerization on the other hand affects the adsorbed amount. The alkyl glucosides start adsorbing at lower bulk concentrations than the maltosides and equilibrate at higher adsorbed amounts above the cmc. When compared with the ethylene oxide (EO) surfactants, it is confirmed that the EO surfactants hardly adsorb on titania, since the measured changes in the ellipsometric angles are within the noise level. They do, however, adsorb strongly on silica.     

Volumetric properties of sodium perfluoroalkylcarboxylates in aqueous solutions at different temperatures

Densities and sound velocities of sodium perfluorohexanoate and sodium perfluorononanoate for different concentrations above and below the critical micelle concentration (cmc) have been obtained at different temperatures. Apparent molar volumes and compressibilities of the surfactants in the monomeric and micellar form have been estimated. The relevant results were plotted as a function of the temperature and the alkyl chain length by using previous data reported for sodium heptanoate and sodium octanoate. The expected linear behaviour in function of temperature and also alkyl chain length have been found. In order to analyze the influence of the substitution of the hydrogen by fluorine in the alkyl chain of the surfactant, the data were compared with the hydrogenated counterpart.     

Polymeric alkenoxy amino acid surfactants: I. Highly selective class of molecular micelles for chiral separation of beta-blockers

Two amino acid-based alkenoxy micelle polymers were synthesized for this study. These include polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) and polysodium N-undecenoxy carbonyl-L-isoleucinate (poly-L-SUCIL). The polymerization time and concentration of the synthesized micelle polymers were optimized by (1)H-nuclear magnetic resonance (NMR) and capillary electrophoresis (CE) experiments. Detailed physicochemical properties ((1)H NMR, critical micelle concentration (CMC), optical rotation, partial specific volume, aggregation number, and polarity) were determined, and these molecular micelles were introduced as a pseudostationary phase in micellar electrokinetic chromatography to study the molecular recognition and to develop a method for simultaneous separation of eight chiral beta-blockers. It is found that poly-L-SUCL gives overall better chiral resolution and wider chiral window than poly-L-SUCIL. After optimizing the type of micelle polymer, injection size and temperature, simultaneous separation and enantioseparation of eight beta-blockers were achieved in less than 35 min. A comparison with the amide-type surfactants of the same polar head group and alkyl chain length showed that carbamate-type surfactants always work better than the corresponding amide-type surfactant.     

Diffusion of Alkyltriphenylphosphonium Bromides in Aqueous Micellar Solutions

Dynamic light scattering, conductometry, and capillary viscometry have been used to study aqueous micellar solutions of dodecyl-, tetradecyl-, and hexadecyltriphenylphosphonium bromides in a wide range of concentrations covering the first and second critical micelle concentrations (CMC₁ and CMC₂). It has been shown that the concentration curves for the diffusion coefficients of the ionic surfactants increase above CMC₁ and, then, pass through a maximum. As the alkyl chain length increases, the slopes of the concentration curves within the range of the linear growth in the diffusion coefficient rise, the height of the maximum increases, and its position shifts toward lower concentrations. The obtained results have been explained in terms of a theory previously developed for ideal micellar systems. It has been shown that the mobility factor plays the predominant role in the range of the linear increase in the diffusion coefficient and the effect of the viscosity of a micellar surfactant solution is enhanced with a rise in its concentration.     

Effect of stiffness on the micellization behavior of model H4T4 surfactant chains

The micellization behavior of a series of model surfactants, all with four head and tail groups (H4T4) but with different degrees of chain stiffness, was studied using grand canonical Monte Carlo simulations on a cubic lattice. The critical micelle concentration, micellar size, and thermodynamics of micellization were examined. In all cases investigated, the critical micelle concentration was found to increase with increasing temperature as observed for nonionic surfactants in apolar or slightly polar solvents. At a fixed reduced temperature and increasing chain stiffness, in agreement with previous observations, it was found that the critical micelle concentration decreased and the average micelle size increased. This behavior is qualitatively consistent with that experimentally observed when comparing hydrogenated and homologous fluorinated surfactants. Thermodynamic considerations based on the analysis of the temperature dependence of the critical micelle concentration indicated that both effects could be interpreted as arising from an increased number of heterocontacts between hydrophobic portions of stiff surfactants and a lower entropic cost on packing rigid chains. Structural analysis that was also based on considering the inner micellar radial dependence of the surfactant head and tail site fraction distributions suggested that, on stiffening the molecular backbone, the resulting micellar aggregates grew, without appreciable deviations from spherical symmetry. Stiffer surfactants led to a slightly denser micellar core because of better packing.     

Role of the nonionic surfactant Triton X-405 in emulsion polymerization. I. Homopolymerization of styrene

The emulsion polymerization of styrene was studied using the nonionic surfactant Triton X-405 (octylphenoxy polyethoxy ethanol). Two separate nucleation periods were noted in these polymerizations resulting in bimodal final latex particle size distributions. The partitioning of the surfactant between the phases was found to play the major role in determining the nucleation mechanism(s) in these polymerizations. Although the total concentration of the emulsifier was always added at a level above its critical micelle concentration (CMC) based on the water phase in the recipe, it was found that the portion of the surfactant initially present in the aqueous phase was below its CMC due to the partitioning. This CMC was also found to increase with increasing total surfactant because the distribution of the surfactant (varying ethylene oxide chain length) depended on the partitioning between the phases. Under these conditions, the first of the two nucleation periods was attributed to homogeneous nucleation, while the second was attributed to micellar nucleation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3813–3825, 1997     

Microstructure of un-neutralized hydrophobically modified alkali-soluble emulsion latex in different surfactant solutions

At low pH conditions and in the presence of anionic, cationic, and nonionic surfactants, hydrophobically modified alkali-soluble emulsions (HASE) exhibit pronounced interaction that results in the solubilization of the latex. The interaction between HASE latex and surfactant was studied using various techniques, such as light transmittance, isothermal titration calorimetry, laser light scattering, and electrophoresis. For anionic surfactant, noncooperative hydrophobic binding dominates the interaction at concentrations lower than the critical aggregation concentration (CAC) (C < CAC). However, cooperative hydrophobic binding controls the formation of mixed micelles at high surfactant concentrations (C > or = CAC), where the cloudy solution becomes clear. For cross-linked HASE latex, anionic surfactant binds only noncooperatively to the latex and causes it to swell. For cationic surfactant, electrostatic interaction occurs at very low surfactant concentrations, resulting in phase separation. With further increase in surfactant concentration, noncooperative hydrophobic and cooperative hydrophobic interactions dominate the binding at low and high surfactant concentrations, respectively. For anionic and cationic surfactant systems, the CAC is lower than the critical micelle concentration (CMC) of surfactants in water. In addition, counterion condensation plays an important role during the binding interaction between HASE latex and ionic surfactants. In the case of nonionic surfactants, free surfactant micelles are formed in solution due to their relatively low CMC values, and HASE latexes are directly solubilized into the micellar core of nonionic surfactants.