Reduced s-d model with antiferromagnetically coupled impurity spins

An antiferromagnetic equivalent-neighbour Heisenberg interaction H_i between impurity spins is added to the reduced s-d Hamiltonian H_r previously introduced by simplifying the Kondo s-d exchange Hamiltonian H_K. Asymptotic mean-field theory is developed for H_r + H_i, in the presence and absence of external magnetic field, and applied to (La_1−xCe_x)Al₂ alloys. Specific heat c_i(T) and zero-field susceptibility χ_i(0,T) curves for (La_1−xCe_x)Al₂ are depicted. The coupling constants of H_r + H_i and conduction bandwidth are adjusted so that T_c temperatures for x = 0.2, 0.1 are equal to the experimental values. c_i(T) exhibits a jump at T_c and is decreasing for T < T_c. χ_i(0,T) has a first order pole at T_c which corresponds to the maximum of experimental susceptibility and χ_i(0,0) > 0. These results improve those obtained earlier on the grounds of H_r theory.     

Granularity, microstructure, and flux creep in TlBa2Ca2Cu3O9+δ superconducting powder and silver-sheated tapes

Silver-sheathed TlBa₂Ca₂Cu₃O_9+δ (Tl-1223) tapes, with a transport critical current density, J_ct, of 6200 A/cm² at 75 K under zero magnetic field, were fabricated by the oxide-powder-in-tube (OPIT) method and characterized using an X-ray diffractometer (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and superconducting quantum interference device (SQUID) magnetometer. The results of the magnetization and SEM study indicate that, in these tapes, individual grains are distributed randomly in orientation and weak links exist. However, strongly linked percolative current paths within the tape persisting in increasing fields, accompanied by strong intrinsic interplanar coupling, sustain a significant J_ct at high fields and lead to the plateau in the J_ct-H curve. Dislocation networks, which may act as effective pinning centers, are the common features observed in the tapes. To investigate the effects on flux pinning due to thermomechanical processing, magnetic relaxation at 1 and 2 T over 5–50 K was measured. The tape shows slightly lower normalized relaxation rates (S=-(1/M_o)dM/ dln t) than the cauliflower-like precursor powder. Analyses of the relaxation data obtained from the tape, after incorporating temperature dependence and field scaling, yield an expression for the effective pinning energy U_eff(J,T,H) = (U₁/H^0.54)[1-(T/ 72.5)²]⁴(J/J_i)^μ. This result was compared with the prediction of the collective flux-creep model, which suggests that Tl-1223 has a three-dimension-like (3D-like) vortex lattice. Presumably, a more plate-like powder morphology may result in improved texturing by the OPIT process. Tl_0.5Bi_0.5Sr₂CaCu₂O_7+δ ((Tl,Bi)-1212) powder with this morphology was therefore synthesized for comparison.     

Effective activation energy Ue(T,J,H) in textured Bi1.84Pb0.4Sr2Ca2Cu3Oy silver-clamped thick films

We have measured the resistivity of textured Bi_1.84Pb_0.4Sr₂Ca₂Cu₃O_y silver-clamped thick films as a function of temperature, current density ranging from 10 to 1×10³ A/cm² and magnetic field up to 0.3 T. We find that the effective activation energy U_e follows U_e(T,J,H)=U₀(1−T/T_p)^mln(J_c0/J)H⁻ with m=1.75 for Hab-plane and 2.5 for Hc-axis and =0.76 for Hab and 0.97 for Hc, for the current density regime above 100 A/cm², where T_p is a function of applied magnetic field and current density. This result suggests the effective activation energy U_e be correlated with the temperature, current density and magnetic field. The possible dissipative mechanisms responsible for the temperature, current density and magnetic field dependence of the effective activation energy are discussed.     

Specific heat and anisotropic superconducting and normal-state magnetization of HoNi2B2C

The magnetization of single-crystal HoNi₂B₂C has been measured as a function of applied field (H) and temperature in order to probe the interplay between superconductivity and magnetism in this complex layered system. The normal-state magnetic susceptibility of HoNi₂B₂C is highly anisotropic with a Curie-Weiss-like temperature dependence for H applied perpendicular to the c-axis and with a much weaker temperature dependence for H applied parallel to the c-axis, indicating that the Ho⁺³ magnetic moments lie predominately in the tetragonal a−b plane below 20 K. High-field magnetization (2000 Oe), low-field magnetization (20 Oe) and zero-field specific heat all give an antiferromagnetic ordering temperature of T_N=5.0 K. Remarkably, in 20 Oe applied field both superconductivity (T_c=8.0 K) and antiferromagnetism (T_N=5.0 K) clearly make themselves manifest in the magnetization data. From these magnetization data a phase diagram in the H−T plane was constructed for both directions of applied field. This phase diagram shows a non-monotonic temperature dependence of H_c2 with a deep minimum at T_N=5 K. The high-field magnetization data for H applied perpendicular to the c-axis also reveal a cascade of three phase transitions for T < 5 K and H < 15 000 Oe, contributing to the rich H versus T phase diagram for HoNi₂B₂C at low temperatures.     

Anomalous magnetotransport phenomena in θ-(BEDT-TTF)2I3

Anomalous magnetotransport phenomena have been observed in θ-(BEDT-TTF)₂I₃ crystals at temperatures below 15 K. The magnetoresistance M : (1) is a linear function of the magnetic field H, (2) is not affected by the angle between the electric current and the magnetic field, (3) but depends on the magnetic field orientation with respect to the crystal axis. Magnetoresistance is expressed as M = (aH²_a + bH²_b + cH²_c)₀^-3/2/H in terms of H = (H_a, H_b, H_c), the zero field resistivity ₀, and parameters a, b, and c which are independent of temperature and magnetic field. We have found that b a > c. Magnetoresistance up to 40 is observed for H = 7T along the b-axis at T = 1.5K.     

Critical currents and the critical state in superconductors with magnetic ions

The critical state model is used to derive equations that relate the additional magnetic moment (ΔM) produced by the flux pinning to the critical current density (J_c) measured in transport measurements. The equations derived for conventional superconductors can be used for superconductors that contain magnetic ions, if ΔM is replaced by ΔM/(1 + χ′(H)) where χ′(H) is the differential susceptibility. In the critical state, the field gradient has contributions from both the macroscopic supercurrents and the Amperian currents from the magnetic ions. Magnetic measurements are sensitive to both contributions. Transport measurements only characterise the macroscopic supercurrents. For superconductors which contain rare-earth elements, the J_c values calculated using hysteretic magnetisation measurements without including the term χ′(H), can be in error by factors of 7.     

Critical behavior of transverse and longitudinal ac susceptibilities in a random anisotropy magnet a-Dy16Fe84

We have investigated critical lines in the H-T plane in a random anisotropy magnet (RAM) a-Dy₁₆Fe₈₄ with a small effective ratio of the anisotropy (D) to the exchange constant (J) by means of ac susceptibility (χ) in static fields H parallel and perpendicular to the ac field. We found that the transverse χ exhibits an anomaly along the irreversible line H(T_f) determined by previous magnetization measurements, while the longitudinal χ does so along a characteristic line H(T_i) in a lower temperature region. Above H(T_f) we also found an extra characteristic line H(T_c). The lines were almost independent of the measured frequency. Both the present results and previous magnetization results suggest that an equilibrium phase transition occurs, and the critical lines analogous to those in Heisenberg spin glasses are present in a weak RAM.     

Magnetic properties and domain structure of polycrystalline DyFe3

Magnetization σ vs. temperature T was measured from 80 to 700 K in polycrystalline DyFe₃ in a magnetic field H = 10 kOe. From σ = f(T), the Curie temperature was determined. Also, σ was measured vs. H from 0 to 70 kOe at 4.2 K. Magnetization at saturation σ₀ at 4.2 K and the magnetic moment of DyFe₃ were also determined. First observations of domain structure in DyFe₃ are reported. The mean domain with is determined in its dependence on the grain size . The magnetocrystalline anisotropy constant of polycrystalline DyFe₃ is determined as K₁ = -1.2×10⁷ erg/cm³.     

Structure and frustrated magnetism of the two-dimensional triangular lattice antiferromagnet Na2BaNi(PO4)2

A new frustrated triangular lattice antiferromagnet Na₂BaNi(PO₄)₂ was synthesized by high temperature flux method. The two-dimensional triangular lattice is formed by the Ni²⁺ ions with S =1. Its magnetism is highly anisotropic with the Weiss constants θ_CW =-6.615 K (H⊥c) and -43.979 K (H||c). However, no magnetic ordering is present down to 0.3 K, reflecting strong geometric spin frustration. Our heat capacity measurements show substantial residual magnetic entropy existing below 0.3 K at zero field, implying the presence of low energy spin excitations. These results indicate that Na₂BaNi(PO₄)₂ is a potential spin liquid candidate with spin-1.     

Effect of a magnetic field on MnAs0.88P0.12 below 80 K

MnAs_0.88P_0.12 has been studied by powder neutron diffraction in external magnetic fields up to 15.2 kOe and temperatures down to 4.2 K. MnAs_0.88P_0.12 takes the MnP type atomic arrangement and exists in para-, ferro- and different (essentially) helimagnetic states. The observation of a double 000^± satellite at 4.2 K < T 70 K adds further evidence to the chain of arguments for distinction between the helimagnetic states H'_a (4.2 K < T < T_S,1 ≈ 70 K) and H_a (T_S,2 ≈ 180 K < T < T_N = (243 ± 5) K). External magnetic fields at 4.2 K < T < 70 K evoke a new magnetic state, which is also characterized by a satellite doublet, and is tentatively designated H'_a,fan.     

Magnetic anisotropy in the paramagnetic phase of TbAl2

The magnetic anisotropy of a single crystal of TbAl₂ has been measured by torque magnetometry from below the Curie point up to 170 K, well into the paramagnetic phase. Within a (110) plane the torque can be described by the expression L(θ) = {P sin 2θ} H² + {Q sin 2θ + S sin 4θ} H⁴ + {T sin 4θ} H⁶, where θ is the an gle formed by the magnetization vector with a [001] axis. The first term (in H²) is interpreted as produced by arrays of defects with axial symmetry. The second (in H⁴) and third (in H⁶) terms arise from anisotropic fourth and sixth rank tensor paramagnetic susceptibilities. On the other hand if the anisotropy is described in terms of effective conventional anisotropy constants K₁ and K₂ within the temperature range 90–170 K it is found that both constants change continuously across the Curie temperature and furthermore the [111] direction remains the easy direction in the paramagnetic range. Anisotropy measurements reveal themselves as a sensitive indicator of the level of macroscopic defects in magnetic crystals.     

Induced absorption of light in the magnetoelectric-photo effect in InSb: Saturation at low temperatures

An induced absorption of photons observed in an electron-hole plasma of InSb in the transverse configuration (JH) of the current density J and the magnetic field H has been demonstrated to saturate at high values of J×H at low temperatures. Nevertheless, strong emission of photons having a central wavelength corresponding to the energy gap is still observed at 80 K, suggesting generation of excess electron-hole pairs by the action of the J×H force. The mechanism of the induced absorption is also discussed.     

Low-temperature phase and magnetic interactions in FCC Fe-Cr-Ni alloys

The low-temperature (5 K < T < 300 K) magnetic properties of a set of nine isostructural fcc Fe-Cr-Ni (Fe ≈ 68 at %, Cr ≈ 20 at%, Ni ≈ 9 at%) alloys were studied by SQUID magnetometry, neutron diffraction and ultrasonic techniques. Type-1 antiferromagnetic (AF) ordering was observed below the Néel temperature, T_N. The dc susceptibility, χ(T), did not exhibit a simple Curie-Weiss dependence. Above T_N, atemperature independent component χ₀ was observed, i.e., χ(T) = χ₀ + C / (itT + θ. T_N was systematically influenced by the lattice parameter, a, decreasing from (47.9 ± 0.5) K to (35.0 ± 0.5) K as a increased by only 0.25%. The average magnetic moment of ≈ 0.6μ_B obtained from neutron scattering was lower than the ≈ 1 μ_B obtained from the SQUID data. Mean field estimates of antiferromagnetic nearest-neighbors exchange interaction (J₁) and ferromagnetic second-nearest-neighbors interaction (J₂) indicate that |J₂/J₁|≈ 1.5. We believe that this is evidence of the RKKY interaction, and self-consistently argue that only the external d electrons are responsible for the localized average moment. This may mean that s-d hybridization of the external electrons is weak in these alloys.     

Surface barrier and magnetic hysteresis of ac permeability in YBaCuO single crystal

The nature of hysteretic behavior of the flux line lattice (FLL) contribution to ac magnetic permeability (μ_v) is analyzed for the case of YBa₂Cu₃O_x single crystal (at applied magnetic field Hc axis). It is shown that hysteresis loops μ_v(H) corresponding to different temperatures (T=70–84 K) are scaled to a universal curve in normalized coordinates. Such a behavior is interpreted in terms of the FLL interaction with the crystal surface. The explicit relationship between μ_v and magnetic induction B is found for the near-surface region of the superconductor. It is shown that the μ_v(H) loops are closely related to the hysteresis of B at cycling of applied magnetic field. The latter hysteresis stems from the Bean–Livingston surface barrier. The estimates demonstrate strong suppression of the surface barrier in YBa₂Cu₃O_x crystal in comparison to that expected for the ideal surface. As a result, the lower branch of the hysteresis loop corresponding to the increasing field is very close to the equilibrium μ_v(H) curve and the surface barrier appreciably affects only the upper branch when magnetic flux leaves the sample. The comparison of theoretical predictions and experimental data provides an opportunity to refine the actual range of stability H_max(B)–H_min(B) for the FLL at fixed B for YBa₂Cu₃O_x crystal in the case of Hc.     

High critical current density YBa2Cu3O7−δ tapes prepared by the surface-oxidation epitaxy method

YBa₂Cu₃O_7−δ (YBCO) films with high critical current density (J_c) were successfully fabricated on nickel tapes buffered with epitaxial NiO. NiO was prepared on the textured nickel tape by the surface-oxidation epitaxy (SOE) method. We have reported so far a critical temperature (T_c) of 87 K and J_c=4–6×10⁴ A/cm² (77 K, 0 T) for the YBCO films on NiO/Ni tapes. To enhance the superconducting properties of the YBCO films on the SOE-grown NiO, depositions of thin oxide cap layers such as YSZ, CeO₂, and MgO on NiO were investigated. These oxide cap layers were epitaxially grown on NiO and provided the template for the epitaxial growth of YBCO films. Substantially improved data of T_c=88 K and J_c=3×10⁵ A/cm² (77 K, 0 T) and 1×10⁴ A/cm² (77 K, Hc, 4 T) were obtained for YBCO film on NiO, by using a MgO cap layer with a thickness of 50 nm. The method described in this paper is a simple way to produce long YBCO tape conductors with high-J_c values.     

基于咔唑-三嗪并吲哚的N-酰腙衍生物的NMR数据归属

N-酰腙类化合物在极性溶剂中存在着E/cis和E/trans两种异构体,本文利用元素分析、红外光谱、1D和2D核磁共振（NMR）波谱（包括¹H NMR、¹³C NMR、¹H-¹H COSY、¹H-¹³C HSQC、¹H-¹³C HMBC和NOESY）等技术,对基于咔唑-三嗪并吲哚的新型N-酰腙衍生物3,即2-（5H-[1,2,4]三嗪[5,6-b]吲哚-3-硫基）-N'-（9-乙基咔唑-3-亚甲基）乙酰肼的两种异构体（E/cis和E/trans）的¹H和¹³C NMR信号进行了全归属,测量了其偶合常数（J值）及两种异构体的含量,确定了其空间结构.     

计算自旋-s算子幺正演化矩阵ds(t)的新方法及其应用

提出了一种严格求解任意自旋-s算子幺正演化矩阵的方法,该方法不同于群论的方法和直接计算的方法,是一种间接的算法.方法的核心是利用两个系统表示的等价性：即自旋-s算子Hamiltonian量H_s=S_x与Heisenberg XX开链带相互作用J_n=n(N-n)的Hamiltonian量的等价性,由于存在这种等价性,自旋-s算子幺正演化矩阵的计算可通过Heisenberg XX开链中态的演化来实现.采用该方法计算了s=3/2,s=2和s=5/2时对应的幺正演化矩阵.由于初始态|sm〉在算子e^-itS_x下的演化实质上相当于对态|sm〉进行一个绕x轴转角为β＝t的转动,演化矩阵元d^s_m'm(t)=〈sm′|e^-itS_x|sm〉就是转动后的态e^-itS_x|sm〉在|sm′〉态上的投影值,所以在t＝π时刻的演化矩阵刚好对应Heisenberg XX开链上量子态的理想传输. 关键词： s算子')" href="#">自旋-s算子 幺正演化矩阵 量子态传输     

Critical behavior of diluted Heisenberg ferromagnets with competing interactions

The pure and the site-diluted classical Heisenberg model on the face centered cubic (fcc) lattice with ferromagnetic exchange J_nn between nearest neighbors and antiferromagnetic exchange J_nn = −J_nn/2 between next nearest neighbors is studied by Monte Carlo simulation. Data are generated by the heat bath algorithm for lattice sizes L = 4, 8, 12, 16, 20 and 24, using histogram reweighting techniques and sampling up to several hundred configurations of the random site disorder. From a finite size scaling analysis both the critical temperature and the critical exponents are estimated. For the pure system, the data are in very good agreement with the critical exponent estimates 1/v ≈ 1.42, β/v ≈ 0.51 obtained from other methods (as a check of the accuracy of our approach, we also study the nearest neighbor model — where J_nn ≡ 0− and again obtain very good agreement with the known behavior). However, for the diluted systems evidence for a new universality class is found. While for concentration c = 0.875 of occupied sites strong crossover phenomena preclude us from giving exponent estimates, for c = 0.75 we find 1/v ≈ 1.2 and β/v ≈ 0.45. Possible reasons why the Harris criterion may not apply for this system are discussed. The application of this study to experiments on Eu_xSr_1−xS is briefly mentioned.     

Fabrication, microstructure and critical current density of screen-printed Ag-(Bi, Pb)2Sr2Ca2Cu3Ox superconducting tapes

The influence of the sintering conditions on the microstructure and critical current density J_c has been studied on screen-printed Ag-(Bi, Pb)₂Sr₂Ca₂Cu₃O_x tapes with a ceramics mono-layer core. Three kinds of fabrication processes, which consist of a combination of cold working (rolling and/or pressing) and sintering, are applied. Four times repetition of pressing and sintering after the pre-sintering produces the highest c-axis alignment and achieves J_c= 1.5 × 10⁴ A/cm² (77 K, 0 T). The J_c versus θ data with an angle θ between B and the c-axis elucidate the relation between the anisotropy ratio γ=J_c(Bc)/J_c(B|c and the half-height angular width Δθ of a peak for Bc. This is related to both grain alignment and the J_c value. An increase in J_c, which comes from an improvement for grain alignment, enhances γ and narrows Δθ. The J_c versus θ data are fitted to the expression J_c(B, θ)=J _c(B, 90°)/[(γ−1)|cos θ|ⁿ+1] by regarding both γ and n as adjustable parameters. Fabrication of screen-printed tapes with multilayers (1≤N≤5) is presented, where the critical current increases from 8.0 A to 30.2 A at 77 K and 0 T as N increases.