Hydroboration of Phosphaalkynes by HB(C6F5)2

The hydroboration of phosphaalkynes with Piers’ borane (HB(C₆F₅)₂) generated unusual phosphaalkenylboranes [RCH=PB(C₆F₅)₂]₂ that persisted as dimers in both solution and the solid state. These P₂B₂ heterocycles underwent ring opening when subjected to nucleophiles, such as pyridine and tert‐butylisocyanide, to yield monomeric phosphaalkenylborane adducts RCH=PB(C₆F₅)₂(L). DFT calculations were performed to probe the nature of the interaction of phosphaalkynes with boranes.     

Reaction of (C6F5)2HGeGeH(C6F5)2 with triethylbismuth: molecular structure of [(C6F5)2Ge]4Bi2

The reaction of (C₆F₅)₂HGeGeH(C₆F₅)₂ with triethylbismuth affords a new polynuclear germylbismuth derivative, [(C₆F₅Ge]₄Bi₂ (1). The metal framework of molecule1 has the form of a gable roof built by two central Bi atoms and four peripheral Ge atoms with covalent Bi-Bi bonds [3.045(3) Å], Bi-Ge [2.724(5)-2.755(4) Å] and Ge-Ge [2.444(6), 2.465(6) Å].Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 921–924, May, 1994.     

Reactivity of the bis(pentafluorophenyl)boranes ClB(C6F5)2 and [HB(C6F5)2]n towards late transition metal reagents

The reactivities of the highly electrophilic boranes ClB(C(6)F(5))(2) (1) and [HB(C(6)F(5))(2)](n) (2) towards a range of organometallic reagents featuring metals from Groups 7-10 have been investigated. Salt elimination chemistry is observed 1 between and the nucleophilic anions eta(5)-C(5)R(5))Fe(CO)(2)](-)(R = H or Me) and [Mn(CO)(5)](-), leading to the generation of the novel boryl complexes (eta(5)-C(5)R(5))Fe(CO)(2)B(C(6)F(5))(2)[R = H (3) or Me (4)] and (OC)(5)MnB(C(6)F(5))(2) (5). Such systems are designed to probe the extent to which the strongly sigma-donor boryl ligand can also act as a pi-acceptor; a variety of spectroscopic, structural and computational probes imply that even with such strongly electron withdrawing boryl substituents, the pi component of the metal-boron linkage is a relatively minor one. Similar reactivity is observed towards the hydridomanganese anion [(eta(5)-C(5)H(4)Me)Mn(CO)(2)H](-), generating a thermally labile product identified spectroscopically as (eta(5)-C(5)H(4)Me)Mn(CO)(2)(H)B(C(6)F(5))(2) (6). Boranes 1 and 2 display different patterns of reactivity towards low-valent platinum and rhodium complexes than those demonstrated previously for less electrophilic reagents. Thus, reaction of 1 with (Ph(3)P)(2)Pt(H(2)C=CH(2)) ultimately generates EtB(C(6)F(5))(2) (10) as the major boron-containing product, together with cis-(Ph(3)P)(2)PtCl(2) and trans-(Ph(3)P)(2)Pt(C(6)F(5))Cl (9). The cationic platinum hydride [(Ph(3)P)(3)PtH](+) is identified as an intermediate in the reaction pathway. Reaction of with [(Ph(3)P)(2)Rh(mu-Cl)](2), in toluene on the other hand, appears to proceed via ligand abstraction with both Ph(3)P.HB(C(6)F(5))(2) (11) and the arene rhodium(I) cation [(Ph(3)P)(2)Rh(eta(6)-C(6)H(5)Me)](+) (14) ultimately being formed.     

Heterolytic dihydrogen activation by B(C6F5)3 and carbonyl compounds

Aromatic carbonyl compounds in combination with B(C(6)F(5))(3) are able to activate H(2) heterolytically. The reactivity of the carbonyl-B(C(6)F(5))(3) adduct is initiated by its thermal dissociation into components. After H(2) addition, aromatic carbonyl compounds convert into aryl-substituted methanes or alcohols.     

Reductive elimination of C6F5-C6F5 in the reaction of bis(pentafluorophenyl)palladium(II) complexes with protic acids

Reductive elimination of C6F5-C6F5 from cis-[Pd(C6F5)2L] (L = cod, bpy, and dppb) was promoted by Br?nsted acids. HNO3 is a convenient acid for the formation of C6F5-C6F5 from [Pd(C6F5)2(cod)]. The products are controlled by the auxiliary ligand.     

Reaction of a 6-dimethylaminopentafulvene with the Mes2PCH2CH2B(C6F5)2 frustrated Lewis pair

The frustrated Lewis pair Mes(2)PCH(2)CH(2)B(C(6)F(5))(2) reacts readily with 6-dimethylamino-6-methylfulvene at room temperature to yield the trans-1-[B(C(6)F(5))(2)]-2-[CH(2)CH(2)PMes(2)] disubstituted fulvene derivative 9 that features an internal N-B contact. Thermolysis (80 °C in toluene) results in a complete isomerization to the respective 1-[B(C(6)F(5))(2)]-3-[CH(2)CH(2)PMes(2)] isomer 10. Both compounds were characterized by using X-ray diffraction. A reaction scheme is formulated to rationalize the specific formation of these compounds, involving a retro-hydroboration/hydroboration sequence. The reaction of the 6-dimethylaminofulvene with HB(C(6)F(5))(2) yielded the corresponding parent compound 13 that was also characterized by X-ray diffraction.     

19F NMR Investigations of the Reaction of B(C6F5)3 with Different Tri(alkyl)aluminum Compounds

Tris(pentafluorophenyl)borane, B(C₆F₅)₃ reacts with triethylaluminum, AlEt₃ to a mixture of Al(C₆F₅)_3−nEt_n and Al₂(C₆F₅)_6−nEt_n compounds depending on the B/Al ratio. From excess borane to excess AlEt₃ the species Al(C₆F₅)₃ → Al(C₆F₅)₂Et Al₂(C₆F₅)₄Et₂ → Al₂(C₆F₅)₃Et₃ → Al₂(C₆F₅)₂Et₄ → Al₂(C₆F₅)Et₅ are formed and differentiated by their para-F signal in ¹⁹F NMR. The reaction between B(C₆F₅)₃ and the higher aluminum alkyls, tri(iso-butyl)aluminum and tri(n-hexyl)aluminum AlR₃ (R = i-Bu, n-C₆H₁₃) is slower and requires AlR₃ excess to shift the C₆F₅ R exchange equilibria to almost complete formation of Al(C₆F₅)R₂ and BR₃. At equimolar ratio the equilibrium lies on the side of the unchanged borane together with its boranate [B(C₆F₅)₃R]⁻ anion. For tri(n-octyl)aluminum even at large Al(n-C₈H₁₇)₃ excess no C₆F₅ alkyl exchange can be observed, but boranate anions form.     

Unusual Pathway Taken in the Reaction of Bis(alkynyl)diisopropylaminoboranes with B(C6F5)3

The bis(alkynyl)diisopropyl‐aminoboranes 7 were prepared by treatment of iPr₂NBCl₂ with two molar equivalents of 1‐pentynyl lithium or lithium phenylacetylenide, respectively. Their reaction with one molar equivalent of B(C₆F₅)₃ resulted in the formation of the 1,1‐carboboration products 8 that were subsequently stabilized by adduct formation ( 9 ) with tert‐butyl isocyanide. Thermolysis of 8a (R=nPr) proceeded with hydride transfer from a N‐isopropyl substituent to the distal carbon atom of the remaining pentynyl unit at boron to give the zwitterionic five‐membered heterocyclic product 10a in good yield. The analogous product 10b (R=Ph) was obtained upon photolysis of 8b . The compounds 7b , 9b , 10a , and 10b were characterized by X‐ray crystal structure analysis.     

Dihydrogen activation with (t)Bu3P/B(C6F5)3: a chemically competent indirect mechanism via in situ-generated p-(t)Bu2P-C6F4-B(C6F5)2

A chemically competent indirect pathway for the activation of dihydrogen by the nonmetal Lewis acid/Lewis base pair (t)Bu(3)P/B(C(6)F(5))(3) is described. The reaction between (t)Bu(3)P and B(C(6)F(5))(3) produces [(t)Bu(3)PH](+)[FB(C(6)F(5))(3)](-) and the known phosphinoborane p-(t)Bu(2)P-C(6)F(4)-B(C(6)F(5))(2) (1-(t)Bu) with elimination of isobutylene. At 1:1 stoichiometry, 1-(t)Bu is produced rapidly in detectable quantities and can act as a catalyst for the formation of [(t)Bu(3)PH](+)[HB(C(6)F(5))(3)](-) from (t)Bu(3)P and B(C(6)F(5))(3) in the presence of H(2). The extent to which this indirect path competes with the direct path is explored.     

Perfluororganotellur-Verbindungen: Neue Untersuchungen zur Darstellung von Te(Rf)2 und CH3TeRf (Rf = C2F5, C3F7, C6F5)

Perfluoroorgano Tellurium Compounds: New Investigations on the Preparation of Te(R_f)₂ and CH₃TeR_f (R_f = C₂F₅, C₃F₇, C₆F₅) Methyl(perfluoroorgano) tellurium and bis(perfluoroorgano) tellurium compounds are synthesized in high yields from the photochemical or the thermal reactions of (CH₃)₂ Te with perfluoroorgano iodides in the presence of (C₂H₅)₃N. They are isolated in pure states. Another general method for the preparation of bis(perfluoroorgano) tellurium is the thermal reaction of TeCl₄ with bis(perfluoroorgano) mercury. The preparations and properties of the partially new compounds are described.     

Synthesis and reactivity of the phosphinoboranes R2PB(C6F5)2

The phosphinoboranes [R(2)PB(C(6)F(5))(2)](2) (R = Et 1, Ph 2) and R(2)PB(C(6)F(5))(2) (R = tBu 3, Cy 4, Mes 5) were synthesized from the reaction of (C(6)F(5))(2)BCl and the corresponding lithium phosphide. The relationships between B-P distance, P pyramidality, and the extent of BP multiple bonding were further explored computationally. Natural Bond Order (NBO) analyses of 3 and 4 showed that the π-bonding highest occupied molecular orbitals (HOMOs) were highly polarized. In addition the Lewis acid-base adducts, R(2)(H)P·B(H)(C(6)F(5))(2) (R = Et 6; Ph 7; tBu 8; Cy 9; Mes 10) were prepared via the reaction of the phosphines R(2)PH with the borane HB(C(6)F(5))(2). Compounds 1 and 2 showed no signs of reaction with H(2); however, reaction of compounds 3 and 4 with H(2) was observed to give 8 and 9. In a related set of reactions compounds 3 and 4 were reacted with H(3)NBH(3) or Me(2)(H)NBH(3) also led to the generation of 8 and 9, respectively. The reaction profile of the reaction of (CF(3))(2)BPR(2) with H(2) was examined computationally and shown to be exothermic. Efforts to effect the reverse reaction, that is, dehydrogenation of adducts 6-10 were unsuccessful. Compound 4 was also shown to react with 4-tert-butylpyridine to give Cy(2)PB(C(6)F(5))(2)(4-tBuC(5)H(4)N) 11 while reactions of 3 and 4 with the Lewis acid BCl(3) gave the dimers (R(2)PBCl(2))(2) (R = tBu 12, Cy 13) and the byproduct ClB(C(6)F(5))(2).     

Coordination compounds with the general formula trans-[M(18-crown-6)(C5HO2F6)2] as structural-thermochemical analogs. The complexes trans-[Pb(18-crown-6)(C5HO2F6)2] and trans-[Ba(18-crown-6)(C5HO2F6)2]

The molecular geometries of the complexes trans-[M(18-crown-6)(C₅HO₂F₆)₂] (where M = Ca, Sr, Ba (I), Zn, Cd, Sn, Pb (II), Fe, Co, Eu, and Yb) were modeled by the molecular mechanics method with fixed R(M-O) distances. The shielding degrees of the central metal atom in these complexes were calculated and the number and types of possible intermolecular contacts between their molecules in the structure were determined. The intermolecular interactions involve identical fragments (atoms) of the ligands: the CF₃ groups of the hexafluoroacetylacetonate ligands and the methylene fragments of the crown ether. Previously unknown complex II and complex I were synthesized according to an original procedure. The structure and thermochemical properties (including sublimation by the Knudsen method) of complex II were studied. As in complex I, the metal cation in complex II is in the cavity of the macrocycle of the crown ether; the hexafluoroacetylacetonate ligands are trans relative to that cation. The presumed similarity of complexes I and II in thermochemical characteristics was confirmed experimentally. Both the complexes melt in close temperature intervals and sublime at the same temperature (～10^?2 mm Hg) without decomposition. The enthalpies of sublimation of complexes I and II, as well as the entropy contributions to their volatilities, are equal to within the experimental error.     

Vaporization of Molecular Strontium and Barium β-Diketonates [Sr(15C5)(C5O2F6H)2] and [Ba(18C6)(C5O2F6H)2]. Structure-Thermochemical Approach

Vaporization of the barium molecular complex [Ba(18C6)(C₅O₂F₆H)₂] and the newly prepared strontium complex [Sr(15C5)(C₅O₂F₆H)₂] was studied using a semiempirical structure-thermochemical approach. The studies of intermolecular steric shielding of individual atoms and analysis of the possible intermolecular contacts in these complexes made it possible to identify the atoms and atom groups with significant contributions to the vaporization enthalpy. The hypothetical vaporization enthalpies were calculated by summing the contributions of groups. The melting and sublimation enthalpies were determined experimentally.     

The perfluorinated alcohols (F5C6)(F3C)2COH and (F5C6)(F10C5)COH: synthesis, theoretical and acidity studies, spectroscopy and structures in the solid state and the gas phase

The syntheses of the perfluorinated alcohols (F(5)C(6))(F(3)C)(2)COH (1) and (F(5)C(6))(C(5)F(10))COH (2) are described. Both compounds were prepared in reasonable yields (1: 65%, 2: 85%) by reacting the corresponding ketone with C(6)F(5)MgBr, followed by acidic work-up. The alcohols were characterized by NMR, vibrational spectroscopy, single-crystal X-ray diffraction, acidity measurements and gas-phase electron diffraction. A combination of appropriate 2D NMR experiments allowed the unambiguous assignment of all signals in the (19)F spin systems, of which that of 2 was especially complex. High acidity of the alcohols is indicated by acidity measurements as well as the calculated gas phase acidities. It is also supported by the crystal structure of 2, which exhibits only a single weak intermolecular hydrogen bridge with an O...O distance of 301 pm. This shows the low donor strength of the oxygen atom in the compound, which is partly compensated through formation of two intramolecular CF...H contacts of 220 and 232 pm length to the proton not involved in the hydrogen bridge. The pK(a) values in acetonitrile are 22.2 for 1 and 22.0 for 2; their calculated gas phase acidities are 1367 and 1343 kJ mol(-1) (MP2/TZVPP level).     

Activation of H2 by phosphinoboranes R2PB(C6F5)2

Phosphinoboranes that combine bulky electron-rich phosphides and electron deficient B(C6F5)2 fragments produce monomeric phosphinoboranes that undergo facile addition of H2 to give the phosphine-borane adducts (R2PH)(HBR'2). This finding in combination with DFT calculations shed light on the uptake of H2 across a group 13-group 15 bond, a critical requirement for the development of recyclable H2 storage materials.