Aggregation and supramolecular membrane interactions that influence anion transport in tryptophan-containing synthetic peptides

Self-assembly is a desired property in supramolecular chemistry, but extensive aggregation may be counterproductive. Rigid systems typically have better organization, but are inherently less dynamic. This work shows that ion transport by amphiphilic heptapeptides (synthetic anion transporters or SATs) is affected by aggregation of the monomers in the bulk aqueous phase to which they are added and within the bilayer. Ion transport was assessed for all compounds by assay of Cl(-) release from liposomes. The mechanism of ion transport was confirmed by planar bilayer conductance studies for two compounds at opposite ends of the efficacy scale. Dynamic light scattering, the Langmuir trough, transmission electron microscopy, ion release from liposomes, and planar bilayer conductance studies were used to assess the importance of self-assembly versus aggregation in ion transport. Generally, greater aggregation was has an adverse effect on the transport, although at least dimerization is required for amphiphilic heptapeptides to readily transport Cl(-). Anion transport in these systems was found to be sensitive to changes in the C-terminal portion of the (Gly)(3)Pro(Gly)(3) sequence. Moreover, a significant difference in transport efficacy was apparent when L-Trp was replaced by D-Trp in the same position.     

Anion transport properties of amine and amide-sidechained peptides are affected by charge and phospholipid composition

Four synthetic anion transporters (SATs) having the general formula (n-C(18)H(37))(2)N-COCH(2)OCH(2)CO-(Gly)(3)Pro-Lys(epsilon-N-R)-(Gly)(2)-O-n-C(7)H(15) were prepared and studied. The group R was Cbz, H (TFA salt), t-Boc, and dansyl in peptides 1, 2, 3, and 4 respectively. The glutamine analog (GGGPQAG sequence) was also included. A dansyl-substituted fluorescent SAT was used to probe peptide insertion; the dansyl sidechain resides in an environment near the bilayer's midpolar regime. When the lysine sidechain was free or protected amine, little effect was noted on final Cl(-) transport rate in DOPC : DOPA (7 : 3) liposomes. This stands in contrast to the significant retardation of transport previously observed when a negative glutamate residue was present in the peptide sequence. It was also found that Cl(-) release from liposomes depended on the phospholipid composition of the vesicles. Chloride transport diminished significantly for the free lysine containing SAT, 2, when the lipid was altered from DOPC : DOPA to pure DOPC. Amide-sidechained SATs 1 and 5 showed a relatively small decrease in Cl(-) transport. The effect of lipid composition on Cl(-) transport was explained by differences in electrostatic interaction between amino acid sidechain and lipid headgroup, which was modeled by computation.     

Amidoximes provide facile platinum(II)-mediated oxime-nitrile coupling

The nucleophilic addition of amidoximes R'C(NH(2))═NOH [R' = Me (2.Me), Ph (2.Ph)] to coordinated nitriles in the platinum(II) complexes trans-[PtCl(2)(RCN)(2)] [R = Et (1t.Et), Ph (1t.Ph), NMe(2) (1t.NMe(2))] and cis-[PtCl(2)(RCN)(2)] [R = Et (1c.Et), Ph (1c.Ph), NMe(2) (1c.NMe(2))] proceeds in a 1:1 molar ratio and leads to the monoaddition products trans-[PtCl(RCN){HN═C(R)ONC(R')NH(2)}]Cl [R = NMe(2); R' = Me ([3a]Cl), Ph ([3b]Cl)], cis-[PtCl(2){HN═C(R)ONC(R')NH(2)}] [R = NMe(2); R' = Me (4a), Ph (4b)], and trans/cis-[PtCl(2)(RCN){HN═C(R)ONC(R')NH(2)}] [R = Et; R' = Me (5a, 6a), Ph (5b, 6b); R = Ph; R' = Me (5c, 6c), Ph (5d, 6d), correspondingly]. If the nucleophilic addition proceeds in a 2:1 molar ratio, the reaction gives the bisaddition species trans/cis-[Pt{HN═C(R)ONC(R')NH(2)}(2)]Cl(2) [R = NMe(2); R' = Me ([7a]Cl(2), [8a]Cl(2)), Ph ([7b]Cl(2), [8b]Cl(2))] and trans/cis-[PtCl(2){HN═C(R)ONC(R')NH(2)}(2)] [R = Et; R' = Me (10a), Ph (9b, 10b); R = Ph; R' = Me (9c, 10c), Ph (9d, 10d), respectively]. The reaction of 1 equiv of the corresponding amidoxime and each of [3a]Cl, [3b]Cl, 5b-5d, and 6a-6d leads to [7a]Cl(2), [7b]Cl(2), 9b-9d, and 10a-10d. Open-chain bisaddition species 9b-9d and 10a-10d were transformed to corresponding chelated bisaddition complexes [7d](2+)-[7f](2+) and [8c](2+)-[8f](2+) by the addition of 2 equiv AgNO(3). All of the complexes synthesized bear nitrogen-bound O-iminoacylated amidoxime groups. The obtained complexes were characterized by elemental analyses, high-resolution ESI-MS, IR, and (1)H NMR techniques, while 4a, 4b, 5b, 6d, [7b](Cl)(2), [7d](SO(3)CF(3))(2), [8b](Cl)(2), [8f](NO(3))(2), 9b, and 10b were also characterized by single-crystal X-ray diffraction.     

Silver complexes of cyclic hexachlorotriphosphazene

The first solid-state structures of complexed P3N3X6 (X = halogen) are reported for X = Cl. The compounds were obtained from P3N3Cl6 and Ag[Al(OR)4] salts in CH2Cl2/CS2 solution. The very weakly coordinating anion with R = C(CF3)3 led to the salt Ag(P3N3Cl6)2+[Al(OR)4]- (1), but the more strongly coordinating anion with R' = C(CH3)(CF3)2 gave the molecular adduct (P3N3Cl6)AgAl(OR')4 (3). Crystals of [Ag(CH2Cl2)(P3N3Cl6)2]+[Al(OR)4]- (2), in which Ag+ is coordinated by two phosphazene and one CH2Cl2 ligands, were isolated from CH2Cl2 solution. The three compounds were characterized by their X-ray structures, and 1 and 3 also by NMR and vibrational spectroscopy. Solution and solid-state 31P NMR investigations in combination with quantum chemically calculated chemical shifts show that the 31P NMR shifts of free and silver-coordinated P3N3Cl6 differ by less than 3 ppm and indicate a very weakly bound P3N3Cl6 ligand in 1. The experimental silver ion affinity (SIA) of the phosphazene ligand was derived from the solid-state structure of 3. The SIA shows that (PNCl2)3 is only a slightly stronger Lewis base than P4 and CH2Cl2, while other ligands such as S8, P4S3, toluene, and 1,2-Cl2C2H4 are far stronger ligands towards the silver cation. The energetics of the complexes were assessed with inclusion of entropic, thermal, and solvation contributions (MP2/TZVPP, COSMO). The formation of the cations in 1, 2, and 3 was calculated to be exergonic by delta(r)G(degrees)(CH2Cl2) = -97, -107, and -27 kJ mol(-1), respectively. All prepared complexes are thermally stable; formation of P3N3Cl5+ and AgCl was not observed, even at 60 degrees C in an ultrasonic bath. Therefore, the formation of P3N3Cl5+ was investigated by quantum chemical calculations. Other possible reaction pathways that could lead to the successful preparation of P3N3X5+ salts were defined.     

Synthesis,structure, and reactivity of some N-phosphorylphosphoranimines

A large series of new N-phosphorylphosphoranimines that bear potentially reactive functional groups on both phosphorus centers were prepared by silicon-nitrogen bond cleavage reactions of N-silylphosphoranimines. Thus, treatment of the N-silylphosphoranimines, Me(3)SiN=P(Me)(R)X (R = Me, Ph; X = OCH(2)CF(3) and R = Me, X = OPh), with phosphoryl chlorides, RP(=O)Cl(2) (R' = Cl, Me, Ph), readily afforded the corresponding N-phosphoryl derivatives, R'P(=O)(Cl)-N=P(Me)(R)X, in high yields. Subsequent reaction with 1 or 2 equiv of the silylamine, Me(3)SiNMe(2), resulted in ligand exchange at the phosphoryl (P=O) group to give the P-dimethylamino analogues, R'P(=O)(NMe(2))N=P(Me)(R)X (R' = Cl, NMe(2), Me, Ph; R = Me, Ph; X = OCH(2)CF(3), OPh). These new N-phosphorylphosphoranimines (and one thiophosphoryl analogue) were obtained as thermally stable, distillable liquids and were characterized by NMR ((1)H, (13)C, and (31)P) spectroscopy and elemental analysis. One member of the series, Cl(2)P(=O)N=P(Me)(Ph)OCH(2)CF(3) (4), was also studied by single-crystal X-ray diffraction which revealed that the formal P(O)-N single bond [1.55(1) A] is shorter than the formal N=PR(2)X double bond [1.60(1) A]. Such structural features are compared to those of similar compounds and discussed in relationship to the unexpected thermolysis pathways observed for these N-phosphorylphosphoranimines, none of which produced poly(phosphazenes).     

Multimetal Fischer carbene complexes of Group VI transition metals: synthesis, structure and substituent effect investigation

Fischer carbene complexes of tungsten with substituents containing up to two additional different transition metals, with all the metals in electronic contact with the carbene carbon atom, were synthesised and studied both in solution and in the solid state. For the complexes of the type [W(CO)(5){C(OR')R}], the substituents chosen were heteroaromatic 2-benzo[b]thienyl (2-BT), or 2-BT π-bonded to a chromium tricarbonyl fragment ([Cr(CO)(3)(2-η(6)-BT)]) or ferrocenyl (Fc) as the R-substituent, while the OR'-substituent was systematically varied between an ethoxy or a titanoxy group, to yield the complexes 1b (R' = Et, R = 2-BT), 2b (R' = Et, R = [Cr(CO)(3)(2-η(6)-BT)]), 3b (R' = TiCp(2)Cl, R = 21-BT), 4b (R' = TiCp(2)Cl, R = [Cr(CO)(3)(2-η(6)-BT)]), 5b (R' = Et, R = Fc) and 6b (R' = TiCp(2)Cl, R = Fc). The structural features and their relevance to bonding in the multimetal carbene compounds of both these tungsten and the analogous chromium complexes were investigated as they represent indicators of possible reactivity sites in multimetal carbene assemblies. The possibility of using DFT calculations to quantify the effect of metal-containing substituents on the carbene ligands was tested and correlated with experimental parameters by employing methods such as vibrational spectroscopy, molecular orbital analysis, and cyclic voltammetry.     

Mechanistic study on the coupling reaction of aryl bromides with arylboronic acids catalyzed by (iminophosphine)palladium(0) complexes. Detection of a palladium(II) intermediate with a coordinated boron anion

The complexes [Pd(eta2-dmfu)(P-N)] [P-N = 2-(PPh2)C6H4-1-CH=NR, R = C(6)H(4)OMe-4; CHMe2; C6H3Me2-2,6; C6H3(CHMe2)-2,6] react with an excess of BrC6H4R1-4 (R1= CF3; Me) yielding the oxidative addition products [PdBr(C6H4R1-4)(P-N)] at different rates depending on R [C6H4OMe-4 > C6H3(CHMe2)-2,6 > CHMe2 approximately C6H3Me2-2,6] and R1 (CF3> Me). In the presence of K2CO3 and activated olefins (ol = dmfu, fn), the latter compounds react with an excess of 4-R2C6H4B(OH)2 (R2= H, Me, OMe, Cl) to give [Pd(eta2-ol)(P-N)] and the corresponding biaryl through transmetallation and fast reductive elimination. The transmetallation proceeds via a palladium(II) intermediate with an O-bonded boron anion, the formation of which is markedly retarded by increasing the bulkiness of R. The intermediate was isolated for R = CHMe2, R1 = CF3 and R2= H. The boron anion is formulated as a diphenylborinate anion associated with phenylboronic acid and/or as a phenylboronate anion associated with diphenylborinic acid. In general, the oxidative addition proceeds at a lower rate than transmetallation and represents the rate-determining-step in the coupling reaction of aryl bromides with arylboronic acids catalyzed by [Pd(eta2-dmfu)(P-N)].     

The bridging function of an apparently nonbridging ligand: dinuclear rhodium complexes with Rh(mu-SbR3)Rh as a molecular unit

Novel dinuclear rhodium complexes of the general composition [Rh2Cl2(mu-CRR')2(mu-SbiPr3)] (4-6) were prepared by thermolysis of the mononuclear precursors trans-[RhCl(=CRR')(SbiPr3)2] in excellent yield. The X-ray crystal structure analysis of 4 (R = R' = Ph) confirms the symmetrical bridging position of the stibane ligand. Related compounds [Rh2Cl2(mu-CPh2)(mu-CRR')(mu-SbiPr3)] (7, 8) with two different carbene units were obtained either from trans-[RhCl(=CPh2)(SbiPr3)2] (1) and RR'CN2 or by a conproportionation of 4 and 5 (R = R' = p-Tol) or 4 and 6 (R= Ph, R' = p-Tol), respectively. While CO reacts with 4 to give the polymeric product [[RhCl(CPh2)(CO)]n] (9), tert-butyl isocyanide replaces the bridging stibane and yields [Rh2Cl2(mu-CPh2)2(mu-CNtBu)] (10). The reaction of 4 with tertiary phosphanes PR3 leads to complete bridge cleavage and affords the mononuclear compounds trans-[RhCl(=CPh2)(PR3)2] (11-15). In contrast, treatment of 4 with SbMe3 and SbEt3 yields the related triply bridged complexes [Rh2Cl2(mu-CPh2)2(mu-SbR3)] (16, 17) by substitution of SbiPr3 for the smaller stibanes. The displacement of the chloro ligands in 4-6 and 10 by n5-cyclopentadienyl gives the dinuclear complexes [(n5-C5H5)2Rh2(mu-CRR')2] (18-20) and [(n5-C5H5)2Rh2(mu-CPh2)2(mu-CNtBu)] (21), of which 18 (R = R' = Ph) was characterized crystallographically.     

Ruthenium complexes of substituted hydrazine: new solution- and solid-state binding modes

The methylhydrazine complex [Ru(NH(2)NHMe)(PyP)(2)]Cl(BPh(4)) (PyP=1-[2-(diphenylphosphino)ethyl]pyrazole) was synthesised by addition of methylhydrazine to the bimetallic complex [Ru(mu-Cl)(PyP)(2)](2)(BPh(4))(2). The methylhydrazine ligand of the ruthenium complex has two different binding modes: side-on (eta(2)-) when the complex is in the solid state and end-on (eta(1)-) when the complex is in solution. The solid-state structure of [Ru(PyP)(2)(NH(2)NHMe)]Cl(BPh(4)) was determined by X-ray crystallography. 2D NMR spectroscopic experiments with (15)N at natural abundance confirmed that in solution the methylhydrazine is bound to the metal centre by only the -NH(2) group and the ruthenium complex retains an octahedral conformation. Hydrazine complexes [RuCl(PyP)(2)(eta(1)-NH(2)NRR')]OSO(2)CF(3) (in which R=H, R'=Ph, R=R'=Me and NRR'=NC(5)H(10)) were formed in situ by the addition of phenylhydrazine, 1,1-dimethylhydrazine and N-aminopiperidine, respectively, to a solution of the bimetallic complex [Ru(mu-Cl)(PyP)(2)](2)(OSO(2)CF(3))(2) in dichloromethane. These substituted hydrazine complexes of ruthenium were shown to exist in an equilibrium mixture with the bimetallic starting material.     

Carboxylate anion diminishes chloride transport through a synthetic, self-assembled transmembrane pore

Six amphiphilic heptapeptides with the structure (C18H37)2NCOCH2OCH2CO-(Gly)3-Pro-(Gly)n-(Glx)-(Gly)m-O(CH2)6CH3, in which Glx represents glutamic acid or its benzyl ester and n+m=2, have been studied. In addition, the glutamate residue in the GGGPGGE sequence was esterified by fluorescent 1-pyrenemethanol. These compounds insert into phospholipid bilayers and form anion-conducting pores. Hill plots based on carboxyfluorescein release indicate that the pores are at least dimeric. Studies that involved ion-selective electrode techniques showed that transport of chloride varied with the position of glutamate within the peptide chain and whether glutamic acid was present as the free acid or its benzyl ester. Chloride transport activity was significantly higher for the glutamate esters than for free carboxylates irrespective of the glutamate position. Activity was highest when the glutamate residue in approximately (Gly)3-Pro-(Xxx)3 approximately was closest to the C terminus of the peptide. A fluorescent pyrene residue was introduced to probe the aggregation state of the amphiphile. The selectivity of the pore for Cl(-) over K+ was maintained even when the carboxylate anion was present within it. Complexation of Cl(-) by the ionophoric peptides was confirmed by negative ion mass spectrometry. Planar bilayer voltage clamp experiments confirmed that pores with more than one conductance state may form in these dynamic, self-assembled pores.     

Planar bilayer studies reveal multiple conductance states for synthetic anion transporters

Compounds of the general type R(1)(2)NCOCH(2)OCH(2)CO-(Gly)(3)-Pro-(Gly)(3)-OCH(2)Ph insert in phospholipid bilayers and conduct ions. Different levels of activity were observed when R(1) was either decyl or octadecyl, as judged either by Cl(-) release, detected by ion selective electrodes, or carboxyfluorescein dequenching, detected by fluorescence. Either method reports average behavior for all ionophores over all liposomes. These methods also show that at least two ionophores are involved in the formation of each pore. Planar bilayer experiments reported here confirm pore formation by these compounds but identify more than one conductance state for each. The pseudo-dimer, in which two molecules of the type shown above are covalently linked, shows only two conductance states, of which one is dominant. This state has been characterized by use of a current-voltage plot.     

Evidence for dimer formation by an amphiphilic heptapeptide that mediates chloride and carboxyfluorescein release from liposomes

Heptapeptides having dioctadecyl, N-terminal hydrocarbon chains insert in phospholipid bilayer membranes and form pores through which at least chloride ions pass. Although amphiphilic, these compounds do not typically form vesicles themselves. They insert in the bilayers of phospholipid vesicles and mediate the release of carboxyfluorescein. Hill analysis indicates that at least two molecules of the amphiphile are involved in pore formation. In CD2Cl2, dimer formation is detected by NMR chemical shift changes. The anion release activity of individual anion transporters is increased by linking them covalently at the C-terminus or, even more, by linking them at the N-terminus. Evidence is presented that either linked molecule releases chloride from liposomes more effectively and rapidly than the individual transporter molecule at a comparable concentration.     

Dissociation of carbanions from acyl iridium compounds: an experimental and computational investigation

Instead of reductive elimination of aldehyde, or decarbonylation to give a trifluoroalkyl hydride, heating Cp(PMe(3))Ir(H)[C(O)CF(3)] (1) leads to the quantitative formation of Cp(PMe(3))Ir(CO) (2) and CF(3)H. Kinetic experiments, isotope labeling studies, solvent effect studies, and solvent-inclusive DFT calculations support a mechanism that involves initial dissociation of trifluoromethyl anion to give the transient ion-pair intermediate [Cp(PMe(3))Ir(H)(CO)](+)[CF(3)](-). Further evidence for the ability of CF(3)(-) to act as a leaving group came from the investigation of the analogous methyl and chloride derivatives Cp(PMe(3))Ir(Me)[C(O)CF(3)] and Cp(PMe(3))Ir(Cl)[C(O)CF(3)]. Both of these compounds undergo a similar loss of trifluoromethyl anion, generating an iridium carbonyl cation and CF(3)D in CD(3)OD. Three additional acyl hydrides, Cp(PMe(3))Ir(H)[C(O)R(F)] (where R(F) = CF(2)CF(3), CF(2)CF(2)CF(3), or CF(2)(CF(2))(6)CF(3)) undergo R(F)-H elimination to give 2 at a faster rate than CF(3)H elimination from 1. Stereochemical studies using a chiral acyl hydride with a stereocenter at the beta-position reveal that ionization of the carbanion occurs to form a tight ion-pair with high retention of configuration and enantiomeric purity upon proton transfer from iridium.     

Rhenium chemistry of diazabutadienes and derived iminoacetamides spanning the valence domain II-VI. Synthesis, characterization, and metal-promoted regiospecific imine oxidation

The reaction of diazabutadienes of type R'N=C(R)-C(R)=NR', L (R = H, Me; R' = cycloalkyl, aryl) with Re(V)OCl(3)(AsPh(3))(2) has furnished Re(V)OCl(3)(L), 1, from which Re(III)(OPPh(3))Cl(3)(L), 2, and Re(V)(NAr)Cl(3)(L), 3, have been synthesized. Chemical oxidation of 2(R = H) by aqueous H(2)O(2) and of 3(R = H) by dilute HNO(3) has yielded Re(IV)(OPPh(3))Cl(3)(L'), 5, and Re(VI)(NAr)Cl(3)(L'), 4, respectively, where L' is the monoionized iminoacetamide ligand R'N=C(H)-C(=O)-NR'(-). Finally, the reaction of Re(V)O(OEt)X(2)(PPh(3))(2) with L has furnished bivalent species of type Re(II)X(2)(L)(2), 6(X = Cl, Br). The X-ray structures of 1 (R = Me, R' = Ph), 3 (R = H, R' = Ph, Ar = Ph), and 4 (R = H, R' = cycloheptyl, Ar = C(6)H(4)Cl) are reported revealing meridional geometry for the ReCl(3) fragment and triple bonding in the ReO (in 1) and ReNAr (in 3 and 4 ) fragments. The cis geometry (two Re-X stretches) of ReX(2)(L)(2) is consistent with maximized Re(II)-L back-bonding. Both ReX(2)(L)(2) and Re(NAr)Cl(3)(L') are paramagnetic (S = (1)/(2)) and display sextet EPR spectra in solution. The g and A values of Re(NAr)Cl(3)(L') are, respectively, lower and higher than those of ReX(2)(L)(2). All the complexes are electroactive in acetonitrile solution. The Re(NAr)Cl(3)(L) species display the Re(VI)/Re(V) couple near 1.0 V versus SCE, and coulometric studies have revealed that, in the oxidative transformation of 3 to 4, the reactive intermediate is Re(VI)(NAr)Cl(3)(L)(+) which undergoes nucleophilic addition of water at an imine site followed by induced electron transfer finally affording 4. In the structure of 3 (R = H, R' = Ph, Ar = Ph), the Re-N bond lying trans to the chloride ligand is approximately 0.1 A shorter than that lying trans to NPh. It is thus logical that the imine function incorporating the former bond is more polarized and therefore subject to more facile nucleophilic attack by water. This is consistent with the regiospecificity of the imine oxidation as revealed by structure determination of 4 (R = H, R' = cycloheptyl, Ar = C(6)H(4)Cl).     

Dissociative electron capture of halocarbon caused by the internal electron transfer from water trimer anion

Dissociative electron capture dynamics of halocarbon absorbed on water cluster anion, caused by internal electron transfer from the water trimer anion to the halocarbon, have been investigated by means of the direct density functional theory (DFT)-molecular dynamics (MD) method. The CF(2)Cl(2) molecule and a water trimer anion e(-)(H(2)O)(3) were used as a halocarbon and a trapped electron, respectively. First, the structure of trapped electron state, expressed by e(-)(H(2)O)(3)-CF(2)Cl(2), was fully optimized. The excess electron was trapped by a dipole moment of water trimer. Next, initial geometries were randomly generated around the equilibrium point of the trapped electron state, and then trajectories were run. The direct DFT-MD calculations showed that the spin density distribution of excess electron is gradually changed from the water cluster (trapped electron state) to CF(2)Cl(2) as a function of time. Immediately, the Cl(-) ion was dissociated from CF(2)Cl(2)(-) adsorbed on the water cluster. The reaction was schematically expressed by e(-)(H(2)O)(3)-CF(2)Cl(2)-->[(H(2)O)(3)-->-CF(2)CL(2)](-) --> (H(2O)(3) + CF(2)CL + CI(-) (I) where [(H(2)O)(3)-CF(2)Cl(2)](-) indicates a transient intermediate state in which the excess electron is widely distributed on both the water cluster and CF(2)Cl(2). The mechanism of the electron capture of halocarbon from the trapped electron in water ice was discussed on the basis of the theoretical results. Also, the dynamics feature was compared with those of the direct electron capture reactions of CF(2)Cl(2) and CF(2)Cl(2)-(H(2)O)(3), i.e. e(-) + CF(2)Cl(2), and e(-) + CF(2)Cl(2)-(H(2)O)(3), investigated in our previous paper [Tachikawa and Abe, J. Chem. Phys., 2007, 126, 194310].     

Stereospecific synthesis of polysubstituted E-olefins by reaction of acyclic nitrones with free and platinum(II) coordinated organonitriles

Free nitriles NCCH2R (1a R = CO2Me, 1b R = SO2Ph, and 1c R = COPh) with an acidic alpha-methylene react with acyclic nitrones -O+N(Me)=C(H)R' (2a R' = 4-MeC6H4 and 2b R' = 2,4,6-Me3C6H2), in refluxing CH2Cl2, to afford stereoselectively the E-olefins (NC)(R)C=C(H)R' (3a-3c and 3a'-3c'), whereas, when coordinated at the platinum(II) trans-[PtCl2(NCCH2R)2] complexes (4a R = CO2Me and 4b R = Cl), they undergo cycloaddition to give the (oxadiazoline)-PtII complexes trans-[PtCl2{N=C(CH2R)ON(Me)C(H)R'}2] (R = CO2Me, Cl and R' = 4-MeC6H4, 2,4,6-Me3C6H2) (5a-5d). Upon heating in CH2Cl2, 5a affords the corresponding alkene 3a. The reactions are greatly accelerated when carried out under focused microwave irradiation, particularly in the solid phase (SiO2), without solvent, a substantial increase of the yields being also observed. The compounds were characterized by IR and 1H, 13C, and 195Pt NMR spectroscopies, FAB+-MS, elemental analyses and, in the cases of the alkene (NC)(CO2Me)C=C(H)(4-MeC6H4) 3a and of the oxadiazoline complex trans-[PtCl2{N=C(CH2Cl)ON(Me)C(H)(4-C6H4Me)}2] 5c, also by X-ray diffraction analyses.     

Enols of amides. The effect of fluorine substituents in the ester groups of dicarboalkoxyanilidomethanes on the enol/amide and E-enol/Z-enol ratios. A multinuclei NMR study.

Condensation of phenyl isocyanate substituted by 4-MeO, 4-Me, 4-H, 4-Br, and 2,4-(MeO)(2) with esters CH(2)(CO(2)R)CO(2)R', R = CH(2)CF(3), R' = CH(3), CH(2)CF(3), CH(CF(3))(2), or R = CH(3), R' = CH(CF(3))(2) gave 17 "amides" ArNHCOCH(CO(2)R)CO(2)R' containing three, six, or nine fluorines in the ester groups. X-ray crystallography of six of them revealed that compounds with > or =6 fluorine atoms exist in the solid state as the enols of amides ArNHC(OH)=C(CO(2)R)CO(2)R' whereas the ester with R = R' = CH(3) was shown previously to have the amide structure. In the solid enols, the OH is cis and hydrogen bonded to the better electron-donating (i.e., with fewer fluorine atoms) ester group. X-ray diffraction could not be obtained for compounds with only three fluorine atoms, i.e., R = CH(2)CF(3), R' = CH(3) but the (13)C CP-MAS spectra indicate that they have the amide structure in the solid state, whereas esters with six and nine fluorine atoms display spectra assigned to the enols. The solid enols show unsymmetrical hydrogen bonds and the expected features of push-pull alkenes, e.g., long C(alpha)=C(beta) bonds. The structure in solution depends on the number of fluorine atoms and the solvent, but only slightly on the substituents. The symmetrical systems (R = R' = CH(2)CF(3)) show signals for the amide and the enol, but all systems with R not equal R' displayed signals for the amide and for two enols, presumably the E- and Z-isomers. The [Enol I]/[Enol II] ratio is 1.6-2.9 when R = CH(2)CF(3), R' = CH(3), CH(CF(3))(2) and 4.5-5.3 when R = CH(3), R' = CH(CF(3))(2). The most abundant enol display a lower field delta(OH) and a higher field delta(NH) and assigned the E-structure with a stronger O-H.O=C(OR) hydrogen bond than in the Z-isomer. delta(OH) and delta(NH) values are nearly the same for all systems with the same cis CO(2)R group. The [Enols]/[Amide] ratio in various solvents follows the order CCl(4) > CDCl(3) > CD(3)CN > DMSO-d(6). The enols always predominate in CCl(4) and the amide is the exclusive isomer in DMSO-d(6) and the major one in CD(3)CN. In CDCl(3) the major tautomer depends on the number of fluorines. For example, in CDCl(3,) for Ar = Ph, the % enol (K(Enol)) is 35% (0.54) for R = CH(2)CF(3,) R' = CH(3), 87% (6.7) for R = R' = CH(2)CF(3), 79% (3.8) for R = CH(3), R' = CH(CF(3))(2) and 100% (> or =50) for R = CH(2)CF(3), R' = CH(CF(3))(2). (17)O and (15)N NMR spectra measured for nine of the enols are consistent with the suggested assignments. The data indicate the importance of electron withdrawal at C(beta), of intramolecular hydrogen bonding, and of low polarity solvents in stabilizing the enols. The enols of amides should no longer be regarded as esoteric species.     

Synthesis,structure, and reactivity of some sterically hindered (Silylamino)phosphines

A series of new (silylamino)phosphines that contain sterically bulky silyl groups on nitrogen were prepared by deprotonation/substitution reactions of the hindered disilylamines t-BuR(2)Si(Me(3)Si)NH (1, R = Me; 2, R = Ph) and (Et(3)Si)(2)NH (3). Sequential treatment of the N-lithio derivatives of 1-3 with PCl(3) or PhPCl(2) and MeLi gave the corresponding (silylamino)phosphines t-BuR(2)Si(Me(3)Si)NP(R')Me (5, R = Me, R' = Ph; 6, R = Ph, R' = Me) and (Et(3)Si)(2)NP(R)Me (11, R = Me; 12, R = Ph) in high yields. Two of the P-chloro intermediates t-BuR(2)Si(Me(3)Si)NP(Ph)Cl (7, R = Ph; 9, R = Me) were also isolated and fully characterized. Hydrolysis of 7 afforded the crystalline PH-substituted aminophosphine oxide t-BuPh(2)SiN(H)P(Ph)(=O)H (10). Thermal decomposition of 7 occurred with elimination of Me(3)SiCl and formation of a novel P(2)N(2) four-membered ring system (36) that contains both P(III) and P(V) centers. Reactions of the N-lithio derivatives of amines 1 and 2 with phosphorus trihalides afforded the thermally stable -PF(2) derivatives t-BuR(2)Si(Me(3)Si)NPF(2) (13, R = Me; 14, R = Ph) and the unstable -PCl(2) analogue 17 (R = Ph). Reduction (using LiAlH(4)) of the SiPh-substituted dihalophosphines 14 and 17 gave the unstable parent phosphine t-BuPh(2)Si(Me(3)Si)NPH(2) (15). The P-organo-substituted (silylamino)phosphines underwent oxidative bromination to afford high yields of the corresponding N-silyl-P-bromophosphoranimines t-BuR(2)SiN=P(R')(Me)Br (18, R = R' = Me; 19, R = Me, R' = Ph; 20, R = Ph, R' = Me) and Et(3)SiN=P(R)(Me)Br (23, R = Me; 24, R = Ph). Subsequent treatment of these reactive PBr compounds with lithium trifluoroethoxide or phenoxide produced the corresponding PO derivatives t-BuR(2)SiN=P(R')(Me)OR' ' (25 and 26, R' ' = CH(2)CF(3); 28-30, R' ' = Ph) and Et(3)SiN=P(R)(Me)OR' (31 and 33, R' = CH(2)CF(3); 32 and 34, R = Ph), respectively. Many of the new compounds containing the bulky tert-butyldiphenylsilyl group, t-BuPh(2)Si, were solids that gave crystals suitable for X-ray diffraction studies. Consequently, the crystal structures of three (silylamino)phosphines (6, 7, and 14), one (silylamino)phosphine oxide (10), one N-silylphosphoranimine (30), and the cyclic compound 36 were determined. Among the (silylamino)phosphines, the P-N bond distances [6, N-PMe(2), 1.725(3) A; 7, N-P(Ph)Cl, 1.68(1) A, 14, N-PF(2), 1.652(4) A] decreased significantly as the electron-withdrawing nature of the phosphorus substituents increased. The N-silylphosphoranimine t-BuPh(2)SiN=PMe(2)OPh (30), which is a model system for poly(phosphazene) precursors, had a much shorter P=N distance of 1.512(6) A and a wide Si-N-P bond angle of 166.4(3) degrees. A similar P=N bond distance [1.514(7) A] and Si-N-P angle [169.9(6) degrees ] were observed for the exocyclic P=N-Si linkage in the ring compound 36, while the phosphine oxide 10 had P-N and P=O distances of 1.637(4) and 1.496(3) A, respectively, and a Si-N-P angle of 134.3(2) degrees.     

Novel ruthenium(II)2 carboxylates as catalysts for alkene metathesis

The reactions of [Ru-(=CHR)Cl2(PCy3)2] (1: R = Ph; 1a: R = -CH=CPh2) with silver salts of carboxylic acids afforded new dimeric complexes of the general formula [Ru2(=CHR)2-(R'CO2)2(mu-R'CO2)2(PCy3)2(mu-H2O)] (2: R = Ph, R' = CF3; 3: R = Ph, R' = C2F5; 4: R = -CH=CPh2, R' = CF3; 5: R = Ph, R' = C6F5; 6: R = -CH=CPh2, R' = C6F5; 7: R = -CH=CPh2, R'=CCl3) in good yields. With R' = CF3, C2F5 or CCl3 these complexes are active catalysts for metathesis of acyclic alkenes, including unsaturated fatty acid esters, as well as for ring closing metathesis. The reactivity of these complexes with bases and weak donor solvents has been studied and their half-life times in several media were determined.     

Reactions of amides with organoaluminum compounds: factors affecting the coordination mode of aluminum amidates

Factors affecting the coordination mode of an amidato group on aluminum will be presented. The reaction of N-tert-butylalkylacetamide ((t)BuNHCR([double bond]O)) with 1.1 molar equiv of Me(3)Al in refluxing hexane affords a pentacoordinated, dimeric compound [Me(2)Al[eta(2)-(t)BuNC(R)(mu(2)-O)]](2) (3, R = p-(t)Bu-C(6)H(4); 4, R = 2,6-F,F-C(6)H(3); 5, R = Me; 6, R = CF(3); 7, R = p-F(3)C-C(6)H(4)). However, in the presence of 2.2 molar equiv of Me(3)Al, N-tert-butyl-4-tert-butylbenzamide ((t)BuNHC(p-(t)Bu-C(6)H(4))([double bond]O in refluxing hexane gives [Me(2)Al[eta(2)-(t)BuNC(p-(t)Bu-C(6)H(4))(mu(2)-O)]AlMe(3)], 8. In contrast, the reaction of R'NHCR' '([double bond]O) with 1 molar equiv of R(3)Al at room temperature produces tetracoordinated, dimeric, eight-membered ring aluminum compounds [R(2)Al[mu,eta(2)-R'NC(R' ')O]](2) (9, R = Me, R' = 2,6-(i)Pr, (i)()Pr-C(6)H(3), R' ' = Ph; 10, R = Me, R' = (i)Bu, R' ' = Ph; 11, R = Et, R' = Bn, R' ' = Ph; 12, R = Me, R' = Ph, R' ' = CF(3); 13, R = Me, R' = Bn, R' ' = CF(3)). On the other hand, 4'-chlorobenzanilide ((p-Cl-C(6)H(4))NHCPh([double bond]O)) reacts with R(3)Al to produce trimeric, twelve-membered ring aluminum compounds [R(2)Al[mu, eta(2)-(p-Cl-C(6)H(4))NC(Ph)O]](3) (14, R = Me; 15, R = Et). Furthermore, the reaction of 2'-methoxybenzanilide with 1 molar equiv of Me(3)Al in hexane yields a dinuclear aluminum complex [Me(2)Al(o-OMe-Ph)NC(Ph)(O)AlMe(3)], 16.