基于磁性微球的固定化金属亲和载体及其在蛋白质/多肽纯化中的应用

采用模板法制备的单分散磁性硅胶微球,经过表面修饰偶联上亚氨基二乙酸(IDA),与过渡金属离子Cu2 螯合,制成一种新型的磁性固定化金属亲和纯化载体。用牛血清白蛋白(BSA)作为模型进行磁性固定化金属亲和吸附蛋白的研究,结果表明,BSA在磁性亲和载体上的吸附可用Langmuir吸附方程描述,对BSA的饱和吸附量为90mg/g。将磁性亲和载体用于带有组氨酸标签的镇痛抗肿瘤多肽(analgesic-antitumorpeptide,AGAP)纯化,在未经过滤的细胞裂解液中可以将AGAP一步纯化,非特异性吸附低,操作简便,完全适用于含有组氨酸标记的重组多肽或蛋白的分离纯化。     

固定化金属螯合亲和膜色谱柱制备及纯化铜锌超氧化物歧化酶的研究

 以大孔纤维素滤纸为基质 ,通过碱处理、环氧活化、偶联亚氨基二乙酸二钠、固定化Cu2 +,装柱后制得固定化金属螯合亲和膜色谱柱。对Cu/Zn SOD粗品进行了纯化研究 ,将其比活从 645U/mL提高到 6882U/mL ,纯化倍数为 1 0 7,蛋白回收率为 92 3% ,活性回收率达 985%。设计了一种解决金属离子泄露问题的方案 ,将Cu2 +泄露量降至 86μg/L。     

乙二胺二琥珀酸功能化硅胶材料的制备及特性研究

以乙二胺二琥珀酸（EDDS）为配体、3-缩水甘油基氧基丙基三甲氧基硅烷（γ-GLDP）为间隔臂、硅胶（Silica）为基质,制得一种新型多功能改性材料—EDDS-Silica。采用X射线光电子能谱（XPS）和酸碱电位滴定对EDDS-Silica分别进行了定性和定量表征,证明EDDS-Silica已成功制备,且当Silica与EDDS用量比为1.5∶3.0(m/m)时单位硅胶基质上EDDS的键合量最高,为39.82μmol/g。通过蛋白质色谱实验以及金属离子吸附实验分别对EDDS-Silica的阳离子交换特性和金属螯合特性进行了考察。结果表明,EDDS-Silica既可作为色谱固定相用于带电荷物质的分离与纯化,又可作为金属螯合吸附剂用于金属离子的吸附研究。EDDS-Silica优良的离子交换和金属螯合特性,使得该配体改性材料具有更为广阔的应用前景。     

水杨酸型螯合树脂对Fe(III)离子的螯合吸附行为

以5-氨基水杨酸(ASA)为胺化试剂, 使氯甲基化的交联聚苯乙烯(CMCPS)微球表面的苄氯基团发生亲核取代反应, 制得了水杨酸型螯合树脂ASA-CPS. 研究了该螯合树脂对金属离子的螯合吸附行为, 探讨了其吸附热力学与吸附机理, 考察了介质pH值对树脂螯合吸附性能的影响以及树脂对不同金属离子的螯合吸附能力. 实验结果表明, 水杨酸型螯合树脂ASA-CPS 对重金属离子具有强螯合吸附性能, 尤其对Fe3+离子表现出很强的螯合吸附能力, 常温下吸附容量可达21 g/100 g. 吸附过程属熵驱动的化学吸附过程, 升高温度, 吸附容量增高; 在可抑制金属离子水解的pH范围内, 介质的pH值越高, 螯合吸附能力越强; 对于性质不同的金属离子, ASA-CPS的吸附性能是有差别的, 吸附容量的顺序为Fe3+>Ni2+>Cu2+>Zn2+.     

2-吡啶甲醛改性壳聚糖的合成及螯合性能的研究

以壳聚糖为主体,2-吡啶甲醛为配体,经Schiff碱反应对壳聚糖进行修饰,合成了具有高螯合性能的2-吡啶甲醛缩壳聚糖(PYCTS)。采用正交实验法研究,并得到了缩合反应的最佳条件:溶胀温度为65℃,反应物的配比(壳聚糖与2-吡啶甲醛的摩尔比)为1:4,溶液pH值为6.0,反应时间为12h。经红外光谱表征了其结构。最高缩合率为97.5%。并研究了2-吡啶甲醛改性壳聚糖(PYCTS)对Cu(Ⅱ)、Ni(Ⅱ)、Co(Ⅱ)、Fe(Ⅲ)离子的静态螯合性能,以及介质种类、介质酸度、金属离子浓度和螯合时间对PYCTS螯合金属离子能力的影响。结果表明,在pH为3~8时,其对Cu(Ⅱ)、Ni(Ⅱ)、Co(Ⅱ)具有较好的螯合性能,且介质种类和介质酸度对PYCTS螯合金属离子能力的影响较大。     

螯合吸附材料PAO/SiO_2对重金属离子的螯合吸附行为

将丙烯腈接枝聚合在微米级硅胶微粒表面,经偕胺肟化转变,制得了接枝有聚偕胺肟(PAO)的复合型螯合吸附材料PAO/SiO2。本文重点考察了螯合吸附材料PAO/SiO2对几种重金属离子的螯合吸附行为,深入地研究了吸附机理。研究结果表明,偕胺肟基团与重金属离子之间的静电作用与配位螯合作用的协同,导致PAO/SiO2对重金属离子产生强的螯合吸附作用。在可抑制金属离子水解的pH范围内,介质的pH值越高,PAO/SiO2的螯合吸附能力越强;PAO/SiO2对性质不同的金属离子的吸附性能是有差别的,吸附容量的顺序为Cu2+Ni2+Pb2+Cd2+。     

交联壳聚糖的结构及其对不同金属离子的吸附性能

交联壳聚糖的结构及其对不同金属离子的吸附性能;交联壳聚糖;Cu2+;Co2+;Ni2+;结构;吸附性能     

牛血清白蛋白修饰的有机-硅胶杂化整体柱的制备及电色谱研究

以四甲氧基硅烷(Tetramethoxysilane,TMOS)和γ-缩水甘油醚氧基丙基三甲氧基硅烷(γ-Glycidyloxypropyltrimethoxysilane,GPTMS)为反应单体,采用"一步法"制备了有机-硅胶杂化整体柱,通过优化TMOS/GPTMS的含量制备了渗透性和机械强度良好的杂化整体柱,扫描电镜结果显示,毛细管柱内形成了连续的整体结构。采用席夫式碱法将牛血清白蛋白(Bovine serum albumin,BSA)共价键合于柱内,并对制备条件进行了优化,确定8 g/L BSA为最佳反应条件。在毛细管电色谱分离模式下,考察了缓冲液pH值、运行电压、柱温和进样条件对分离的影响,最终选择25 mmol/L Tris缓冲液(pH 7.4)、运行电压10 kV、柱温15℃和进样条件2 kV×3 s为最佳分离条件。此手性柱对色氨酸对映体实现了基线分离,日内、日间及柱间精密度良好。与BSA修饰的硅胶整体柱相比,本研究制备的固载BSA的杂化整体柱具有更优的手性识别能力,并且简化了制备流程,缩短了制备周期。     

复合型螯合吸附材料PEI/SiO2对铜离子吸附性能的研究

通过γ-氯丙基三甲氧基硅烷的媒介, 将聚乙烯亚胺(PEI)偶联接枝到硅胶微粒表面, 制备了复合型螯合吸附材料PEI/SiO2;研究了PEI/SiO2对Cu2 的吸附性能. 复合型螯合吸附材料PEI/SiO2对Cu2 具有强的螯合吸附能力;等温吸附数据符合Langmuir方程, 且吸附量随温度升高而增大;pH对吸附量有很大的影响, pH 7时, 吸附量最高.     

壳聚糖亲和磁性毫微粒的制备及其对蛋白质的吸附性能研究

以壳聚糖为包裹材料包埋自制的磁流体 ,制备了具有核 壳结构的磁性毫微粒 ,并偶联色素配基CibacronBlue 3GA(偶联量 1 4 .5μmol/mL)得到了一种新型亲和磁性毫微粒 .结果表明 ,所得亲和磁性微球具有较窄的粒径分布、形状规整 .以牛血清白蛋白 (BSA)和溶菌酶 (Lys)为目标蛋白 ,考察了该亲和磁性毫微粒的吸附性能 ,发现其对BSA和Lys的吸附量分别为 4和 2 8mg/g,吸附行为满足Langmuir吸附等温式 ,且对时间依赖性小而对溶液离子强度敏感 .     

Novel nylon-supported organic-inorganic hybrid membrane with hierarchical pores as a potential immobilized metal affinity adsorbent

Chitosan-based porous organic-inorganic hybrid membranes supported by microfiltration nylon membranes were prepared, in which gamma-glycidoxypropyltrimethoxysilane (GPTMS) was used as an inorganic source as well as crosslinking reagent. Polyethylene glycol (PEG) with different molecular weight and content was used as imprinting molecule for morphology control. In situ crosslinking of chitosan and simultaneous polymerization of GPTMS in PEG template environment endowed the hybrid membrane with specific characteristics. Distinct hybrid effect between chitosan (CS) and GPTMS was revealed by shifting in X-ray diffraction (XRD) pattern, decomposition in simultaneous thermogravimetry and differential scanning calorimetry (TG/DSC) testing. As manifested by scanning electron microscopy (SEM), the molecular weight and content of PEG had remarkable effect on the resulting surface morphology of the hybrid membrane and a given surface morphology could be obtained by extracting of the imprinted PEG molecular. Among three types of porogen used: PEG 400, PEG 4000 and PEG 20000, only PEG 20000 could result in a porous surface. Moreover, a special porous surface with three-dimensional (3D) hierarchical structure-in-structure pore fashion was obtained when content of PEG 20000 was controlled at 15%. Experimental results also showed that the hybrid membrane had low swelling ratio and high stability in acidic solution. After conveniently coordinated with copper ions, the porous metal chelating hybrid membrane could effectively adsorb the model protein, bovine serum albumin (BSA). As expected, the hybrid membrane imprinted with 15% PEG 20000 had remarkably high copper ion binding and BSA adsorption capacity, which might result from the large surface area, high ligand density and suitable interconnected 3D hierarchical porous surface.     

金属离子与氨羧类螯合配体的键合特性研究

利用前沿色谱法,通过Cu2+、Ni2+和Co2+与螯合配体IDA 键合的准确度(R2>0.98)与精密度(RSD <5%)实验,研究了前沿色谱法同时测定络合稳定常数KML与总键合位点数Λ0值的可行性.为了进一步证明前沿色谱法的普适性,以Cu2+、Ni2+和Co2+为代表,在3种键合缓冲体系(NaAc-HAc、Na-PB、Tris-HCl)中,考察了金属离子在3种氨羧类螯合配体(IDA、Asp、Glu)上络合稳定常数KML的变化规律.结果表明,螯合配体对金属离子键合强度遵循IDA>Asp>Glu;金属离子对螯合配体键合强度遵循Cu2+>Ni2+>Co2+;3种键合缓冲体系中,NaAc-HAc键合效果最好.按照M06/6-311++G (d, p) 方法对螯合配体与金属离子的结合能(ΔE)与吉布斯自由能(ΔG)进行相关的量子计算.根据ΔE 与ΔG 的大小,从理论上推测出螯合配体与金属离子的键合规律,此规律与上述实验结果基本相符.本研究为金属离子与螯合配体间键合参数的求取提供了有效的方法和手段,从而为今后提高IMAC柱的稳定性,解决固定金属亲和柱在应用过程中尤其是竞争洗脱过程中金属离子的流失问题奠定了良好的基础.     

Adsorption behavior of metal ions onto a bovine serum albumin (BSA) membrane monitored by means of an electrode-separated piezoelectric quartz crystal.

The interaction between metal ions and bovine serum albumin (BSA) was studied by using a piezoelectric quartz crystal (PQC) arranged in the electrode-separated configuration. A silanized surface of the PQC was coated with a BSA membrane via a coupling reaction with glutaraldehyde. The frequency shifts obtained from PQC coated with a BSA membrane suggested that various kinds of metal ions could be adsorbed onto the BSA membrane from aqueous solutions containing a low concentration of metal ions (2 or 10 micromol dm(-3)), only when the BSA was denatured with an alkaline solution. Anionic species of Pt(IV) and Au(III) were adsorbed onto the denatured BSA membrane from an acetic acid solution at pH 2.2, and cationic species of Cd(II), Zn(II), Co(II), Ni(II), Cu(II), and Ag(I), and cations, such as Ca2+, Ba2+, and Mg2+, were adsorbed from ammonia buffer at pH 9.5, whereas Al(III), Cr(III), Fe(III), Hg(II), and Pb(II) were hardly adsorbed. The adsorption mechanisms of these metal ions are discussed, based on the electrostatic interaction between the metal ions and the denatured BSA membrane, and complex formation between the metal ions and amino acid residues of the denatured BSA. Further, the PQC coated with a denatured BSA membrane was applied to the determination of Pt and Cd, using large frequency shifts for Pt(IV) and Cd(II).     

Use of 2-(tert-butoxy)-N-(3-carbamothioylphenyl)acetamide and graphene oxide for separation and preconcentration of Fe(Ⅲ),Ni(Ⅱ),Cu(Ⅱ) and Zn(Ⅱ) ions in different samples

A simple and selective method using a column packed with graphene oxide(GO) as a solid phase extractant has been developed for the multi-element preconcentration of Fe(Ⅲ),Ni(Ⅱ),Cu(Ⅱ) and Zn(Ⅱ)ions prior to flame atomic absorption spectrometric determinations.The method is based on the sorption of mentioned ions on synthesized GO using 2-(tert-butoxy)-N-(3-carbamothioylphenyl)acetamide as a chelating agent.Several parameters on the extraction and complex formation were optimized.Under the optimized conditions(pH 6,flow rate 9 mL/min),metal ions were retained on the column,then quantitatively eluted by HNO3solution(5 mL,3.0 mol/L).The preconcentration factor was calculated as250.The detection limits for the analyte ions of interest were found in the range of 0.11 ng/mL(Ni2+) to0.63 ng/mL(Cu2+).The column packed with GO was adequate for metal ions separation in matrixes containing alkali,alkaline earth,transition and heavy metal ions.     

Removal of metal ions from aqueous solution by chelating polymeric microspheres bearing phytic acid derivatives

The aim of this study was to investigate the possibility to synthesize new chelating polymeric microspheres owing immobilized biocompatible agent as chelating functional groups and to evaluate their performance in metal ions removal from aqueous solution.The microparticles were synthesized via precipitation polymerization of 4-O-(4-vinylbenzyl)-myo-inositol 1,3,5-orthoformate with ethylene glycol dimethacrylate (EGDMA) and subsequent exhaustive phosphorylation of myo-inositol groups using phosphoric acid.Spherical geometry with monodisperse nature of the polymeric microparticles was confirmed by scanning electron micrographs (SEM) and dimensional analysis. A large surface area of the microspheres provided a maximum interaction of metal ions and the chelating functional groups on the surface. Absorption capacity of the beads for the selected metal ions, i.e., Cu(II), Ni(II), Fe(III), was investigated in detail in aqueous solution at pH 5.0 utilizing UV/Vis spectroscopy. This study showed that the macromolecular systems are very effective in chelating these metal ions and the affinity order of the microbeads toward metal ions is: Fe(III) > Ni(II) > Cu(II).The chelating beads can be easily regenerated by 1.0 M HNO₃ with high effectiveness. These features make the synthesized beads a potential candidate for metal ions removal at high capacity.     

A NOVEL METAL CHELATE AFFINITY ADSORBENT FOR PROTEIN UPTAKE

1. INTRODUCTION Chitosan is a hydrolyzed derivative of chitin and belongs to a family of linear unbranched polysaccharides which contain large amounts of 1,4-linked-2-amino-2-deoxy-β-D-glucan residues. The presence of free amine groups in chitosan enhances the solubility and reactivity of this polymer. Interest in modifying chitosan by using glutaraldehyde has recently increased. The derivatized polymers have been employed for many applications [1~2], including protein immobilization…     

One-pot preparation of silica-supported hybrid immobilized metal affinity adsorbent with macroporous surface based on surface imprinting coating technique combined with polysaccharide incorporated sol--gel process

A simple and reliable one-pot approach using surface imprinting coating technique combined with polysaccharide incorporated sol-gel process was established to synthesize a new organic-inorganic hybrid matrix possessing macroporous surface and functional ligand. Using mesoporous silica gel being a support, immobilized metal affinity adsorbent with a macroporous shell/mesoporous core structure was obtained after metal ion loading. In the prepared matrix, covalently bonded coating and morphology manipulation on silica gel was achieved by using one-pot sol-gel process starting from an inorganic precursor, -glycidoxypropyltrimethoxysiloxane (GPTMS), and a functional biopolymer, chitosan (CS) at the atmosphere of imprinting polyethylene glycol (PEG). Self-hydrolysis of GPTMS, self-condensation, and co-condensation of silanol groups (Si-OH) from siloxane and silica gel surface, and in situ covalent cross-linking of CS created an orderly coating on silica gel surface. PEG extraction using hot ammonium hydroxide solution gave a chemically and mechanically stabilized pore structure and deactivated residual epoxy groups. The prepared matrix was characterized by using X-ray energy dispersion spectroscopy (EDX), scanning electron microscopy (SEM) and mercury intrusion porosimetry. The matrix possessed a high capacity for copper ion loading. Protein adsorption performance of the new immobilized metal affinity adsorbent was evaluated by batch adsorption and column chromatographic experiment using bovine serum albumin (BSA) as a simple model protein. Under the optimized coating conditions, the obtained macroporous surface resulted in a fast kinetics and high capability for protein adsorption, while the matrix non-charged with metal ions offered a low non-specific adsorption.     

Macroporous chitosan layer coated on non-porous silica gel as a support for metal chelate affinity chromatographic adsorbent

A new immobilized metal affinity chromatography (IMAC) matrix was prepared by coordinating Cu2+ with cross-linked chitosan coated on non-porous silica gel (Cu-CTS-SiO2). Macroporous structure could be formed on the coated layer by imprinting polyethylene glycol (PEG) in chitosan film. The surface morphology changes on Cu-CTS-SiO2 bead prepared in different condition were confirmed by scanning electron microscopy (SEM). Effects of chitosan and PEG content in coating solution, the molecular mass of PEG on the surface macropore formation and adsorption capacity of bovine serum albumin (BSA) were investigated. Results indicated that coating solution with 2% chitosan and 10% PEG 20000 was optimal. Batch experiments were also conducted for elucidating the optimal pH, the adsorption isotherm and adsorption kinetics of BSA. Adsorption isotherm of trypsin on the same adsorbent was also performed. Results showed that the support itself had low non-specific interaction with both BSA and trypsin. The maximum adsorption capacity for BSA and trypsin on the prepared IMAC adsorbent could reach 192 mg and 5000 IU, respectively calculated by every gram of chitosan. The binding and eluting condition for BSA were tested on column filled with the adsorbent. Crude BSA sample could be purified on the IMAC column.     

A novel adsorbent for protein chromatography: supermacroporous monolithic cryogel embedded with Cu2+-attached sporopollenin particles

The aim of this study is to prepare supermacroporous cryogels embedded with Cu(2+)-attached sporopollenin particles (Cu(2+)-ASP) having large surface area for high protein adsorption capacity. Supermacroporous poly(2-hydroxyethyl methacrylate) (PHEMA)-based monolithic cryogel column embedded with Cu(2+)-ASP was prepared by radical cryo-copolymerization of 2-hydroxyethyl methacrylate (HEMA) with N,N'-methylene-bis-acrylamide (MBAAm) as cross-linker directly in a plastic syringe for affinity purification of human serum albumin (HSA). Firstly, Cu(2+) ions were attached to sporopollenin particles (SP), then the supermacroporous PHEMA cryogel with embedded Cu(2+)-ASP was produced by free radical polymerization using N,N,N',N'-tetramethylene diamine (TEMED) and ammonium persulfate (APS) as initiator/activator pair in an ice bath. Embedded particles (10 mg) in PHEMA-based cryogel column were used in the adsorption/desorption of HSA from aqueous solutions. Optimum conditions of adsorption experiments were performed at pH 8.0 phosphate buffer, with flow rate of 0.5 mL/min, and at 5°C. The maximum amount of HSA adsorption from aqueous solution was very high (677.4 mg/g SP) with initial concentration 6 mg/mL. It was observed that HSA could be repeatedly adsorbed and desorbed to the embedded Cu(2+)-ASP in PHEMA cryogel without significant loss of adsorption capacity.     

Preparation of a Heavy Metal-Removed Seawater

A purification procedure is described for preparing a heavy metal-removed blank seawater without altering its major compositions and pH. Coastal seawater is treated sequentially by passing through a charcoal column, shaking with a dense slurry of ferric hydroxide at pH 8, and passing the surpernatant through a Chelex-100 chelating ion-exchange column. Experimental data show that this process efficiently removes Cd, Co, Cu, Cr(III), Fe, Mn, Ni, Pb, V and Zn from natural seawater at the spiking concentrations of 10 and 100 ppb levels.