Photocatalytic degradation of dichloroacetyl chloride adsorbed on TiO<Subscript>2</Subscript>

Dichloroacetyl chloride (DCAC) attracted our attention as an intermediate product of the photocatalytic degradation of trichloroethylene (TCE). The adsorption and photocatalytic reaction of DCAC on TiO₂ have been investigated by FTIR spectroscopy. The influence of the surface structure of several TiO₂s on the reaction mechanism was discussed in order to understand the complete degradation mechanism of TCE as well as DCAC. DCAC was transformed into dichloroacetic acid (DCAA) on the relatively hydrophobic TiO₂ surface by the small amount of the water molecules weakly adsorbed on the surface. This DCAA was degraded to phosgene, CO₂, and CO during UV irradiation. For the hydrophilic TiO₂, DCAC was mainly transformed into the dichloroacetate anion. UV irradiation allowed this species to produce chloroform in addition to phosgene, CO₂, and CO. It is suggested that DCAC easily reacts with the Ti–OH group on the hydrophilic TiO₂ and forms the bidentate titanium chelate of dichloroacetate, which efficiently degrades into chloroform.     

Photocatalytic degradation of Br-trihalomethanes by nanosized TiO<Subscript>2</Subscript>/diatomite hybrid photocatalyst

Nanosized TiO₂/diatomite catalyst was prepared by sol–gel method at ambient temperature. Diatomite was used as a carrier, tetrabutyl titanate served as a source of titanium. The photocatalytic degradation of Br-THMs was successfully achieved in the presence of TiO₂/diatomite under Xe-light irradiation. It was suggested that Br-THMs were debromized in a stepwise manner. The rate of degradation increases markedly with increasing extent of substitution of Br-THMs by bromine because the C–Br bond is less stable than the C–Cl bond. Furthermore, the degradation of Br-THMs was caused by the action of hydroxyl free radicals, the signals of which were registered by means of electron spin resonance (ESR) spectroscopy.     

Photocatalytic activity of Au/TiO<Subscript>2</Subscript> nanocomposite for azo-dyes degradation

The structural properties of Au/TiO₂ catalyst were studied by X-ray diffraction, UV-visible diffuse reflectance, photoluminescene, scanning transmission and electron microscope, and temperature programmed reduction. The photocatalytic activity of the catalysts was evaluated for the degradation of various azo-dyes such as methylene blue, methyl orange, reactive blue-4, and eosin-B under solar irradiation. It was found that TiO₂ catalyst modified with gold exhibits higher percentage of degradation compared to starting TiO₂. For example, TiO₂ showed 35% of methyl orange degradation whereas gold modified TiO₂ possessed 82%. Effect of different parameters such as pH and dye concentration has been evaluated and the photocatalytic activity was correlated with physico-chemical properties. The dye degradation rate followed first order kinetics.     

Photocatalytic properties of electric-explosion-produced TiO<Subscript>2</Subscript> nanopowder

Structural features and physicochemical and photocatalytic properties of an electric-explosion-produced titanium dioxide powder were studied by means of X-ray phase and X-ray diffraction analyses, transmission electron microscopy, thermal analysis, and optical spectroscopy.     

Photocatalytic reduction of CO<Subscript>2</Subscript> over TiO<Subscript>2</Subscript> based catalysts

At present, carbon dioxide is considered the largest contributor among greenhouse gases. This review covers the current state of problem of carbon dioxide emissions from industrial and combustion processes, the principle of photocatalysis, existing literature related to photocatalytic CO₂ reduction over TiO₂ based catalysts and the effects of important parameters on the process performance including light wavelength and intensity, type of reductant, metal-modified surface, temperature and pressure. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Photocatalytic degradation of adenosine triphosphate in an aqueous suspension of TiO<Subscript>2</Subscript>: a HPLC and <Superscript>1</Superscript>H-NMR study

Photocatalytic degradation process of ATP was followed by HPLC and ¹H-NMR measurements. Adenine was one of the major products when the aqueous ATP sample with TiO₂ dispersion was irradiated by UV light (λ = 365 nm) for 90 min. The ¹H-NMR spectra indicated the presence of another product (Z), which likely came from the ribose moiety in ATP. Photocatalytic generation of OH^˙ radicals on TiO₂ surface was concluded to be responsible for degrading ATP. A working hypothesis of the reaction process was proposed to account for the reaction products.     

Visible-light-driven photocatalytic degradation of microcystin-LR by Bi-doped TiO<Subscript>2</Subscript>

Bi-doped nano-crystalline TiO₂ (Bi–TiO₂) has been synthesized by sonocrystallization at low temperature. The Bi–TiO₂ materials have narrower bandgaps than pristine TiO₂, which endow them with significant visible light absorption. Accordingly, these materials had enhanced photocatalytic activity in the degradation of organic dye pollutants and the cyanotoxin microcystin-LR (MC-LR) under visible irradiation. It was found that degradation of MC-LR is rather efficient. After irradiation with visible light for 12 h the original MC-LR was removed completely, and 78% of the organic carbon was mineralized into CO₂ after irradiation for 20 h. The hydroxyl radical (·OH) is the major active species responsible for the degradation reaction. Identified intermediates primarily originate from attack of ·OH radicals on the double bonds between C4 and C5 (C6 and C7) of Adda and the ethylenic bond of Mdha in MC-LR. Some peptide bonds are also broken with longer irradiation time.     

Photocatalytic degradation of trichloroethylene on platinum ion-doped TiO<Subscript>2</Subscript> under visible light irradiation

Porous platinum ion-doped TiO₂ (Pt–TiO₂) was prepared by a sol–gel method and demonstrated to have superior photocatalytic activity for the photodegradation of gaseous trichloroethylene (TCE) under visible light (VL) irradiation from a xenon lamp equipped with 422-nm cut-off filter. Kinetic studies were performed to clarify the effect of the doping amounts, space times, VL intensity, and mole fractions of TCE, O₂, and H₂O on the degradation of TCE. Under ultraviolet (UV) irradiation, the photocatalytic activity of Pt–TiO₂ was the same as that of TiO₂, indicating that the doped Pt ion did not act as a recombination center for the photogenerated holes and electrons. Based on the kinetic data and reaction products, we conclude that the photocatalytic degradation of TCE on Pt–TiO₂ under VL irradiation proceeds similarly to TiO₂ under UV irradiation. We also performed the photocatalytic degradation of TCE at the space time of 7.5 × 10⁷ g s mol^?1 in a tubular reactor packed with the Pt–TiO₂ pellets which are more suitable than the Pt–TiO₂ powder for the practical remediation of the contaminated gas. TCE was completely degraded, i.e. 100% conversion was achieved under VL irradiation but only a small quantity of CO₂ was formed with the stoichiometric ratio of [CO₂]_formed/[TCE]_degraded of ca. 0.33. By switching the gas stream containing TCE to humid air, more CO₂ was formed, indicating that the dichloroacetates accumulated on the Pt–TiO₂ surface are photodegradable to CO₂ under VL irradiation.     

Photocatalytic properties of mesoporous TiO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> films in gas-phase oxidation of alcohols

We have used the sol-gel template synthesis method to obtain mesoporous zirconium-containing titanium dioxide films and have studied their structural and sorption characteristics, surface acid function, and photocatalytic activity during gas-phase oxidation of aliphatic alcohols. We have shown that the zirconium content changes the acidity and specific surface area of the films, determining the rate at which the studied processes occur and the relative yield of reaction products. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 41, No. 6, pp. 354–359, November–December, 2005.     

Photocatalytic activity of a mesoporous TiO<Subscript>2</Subscript>/Ni composite in the generation of hydrogen from aqueous ethanol systems

TiO₂/Ni metal-semiconductor composites were prepared from mesoporous titanium dioxide obtained by sol-gel precipitation in the presence of a structure-forming template. The photocatalytic activity of mesoporous TiO₂/Ni composites in the generation of hydrogen from aqueous ethanol mixtures was discovered and studied in detail.__________Translated from Teoreticheskaya i Éksperimentalnaya Khimiya, Vol. 41, No. 1, pp. 24–29, January–February, 2005.     

TiO<Subscript>2</Subscript> nanofibers embedding single crystalline TiO<Subscript>2</Subscript> nanowires

Epitaxially grown titanium dioxide (TiO₂) nanofibers embedding single crystalline TiO₂ nanowires (NWs) were successfully fabricated by electropinning poly(vinyl pyrrolidone)/ethanol solutions mixed with hydrothermally synthesized TiO₂ NWs and titanium isopropoxide precursors and subsequently calcinating the electrospun nanofibers. Utilizing scanning electron microscopy (SEM) and transmission electron microscopy (TEM), the morphologies of TiO₂ NWs and nanofibers were investigated. High resolution TEM (HR-TEM) and selected area electron diffraction (SAED) allowed us to indentify the fact that, during the calcination process under the optimized condition, titanium isopropoxide precursors were epitaxially crystallized on the surface of single crystalline TiO₂ NWs. Based on the X-ray diffraction (XRD) experiments, it was also realized that the crystalline structure of hydrothermally synthesized TiO₂ NWs and epitaxially crystallized TiO₂ nanofibers is anatase and that TiO₂ composite nanofibers embedding TiO₂ NWs exhibited a higher crystallinity than the pristine TiO₂ nanofibers. Additionally, ultraviolet visible (UV–Vis) spectra of nanofibers indicated that optical properties of TiO₂ nanofibers can be tuned by introducing the single crystalline TiO₂ NWs.     

TiO<Subscript>2</Subscript> Photocatalytic Oxidation: III. Gas-Phase Reactors

A number of reactor designs for photocatalytic oxidation in the gas phase are considered: cylindrical reactors with photocatalysts supported by various techniques, a reactor with a vibrationally fluidized bed of a photocatalyst, and a coil reactor with the reactivation of a photocatalyst at regular intervals. It was found that the vibrational fluidization of catalyst grains enhanced catalyst activity because of the effect of periodic illumination of different grain sides. The results of testing of two types of domestic photocatalytic air purifiers commercially manufactured in Russia are reported.__________Translated from Kinetika i Kataliz, Vol. 46, No. 3, 2005, pp. 466–473.Original Russian Text Copyright © 2005 by Vorontsov, Kozlov, Smirniotis, Parmon.     

TiO<Subscript>2</Subscript> Photocatalytic Oxidation: II. Gas-Phase Processes

The results of studies on the TiO₂ photocatalytic oxidation of model air pollutants are summarized. The kinetics of photocatalytic oxidation of CO and the vapors of a number of simple organic substances was studied in detail. It was found that, in the course of reaction, all of the test substances underwent complete mineralization. Gaseous substrates were converted with the participation of several types of reaction centers. The photocatalytic oxidation of sulfur- and phosphorus-containing substances resulted in gradual deactivation of the photocatalyst; however, its activity can be restored by washing the photocatalyst with water. It was found that, along with oxidation, the steps of hydrolysis play an important role in the photocatalytic degradation of air pollutants, such as dimethyl methylphosphonate and 2-chloroethyl sulfide.__________Translated from Kinetika i Kataliz, Vol. 46, No. 3, 2005, pp. 450–465.Original Russian Text Copyright © 2005 by Vorontsov, Kozlov, Smirniotis, Parmon.     

Microstructure of SiO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> hybrid electrospun nanofibers and their application in dye degradation

SiO₂/TiO₂ hybrid nanofibers were prepared by electrospinning and applied for photocatalytic degradation of methylene blue (MB). The phase structure, specific surface area, and surface morphologies of the SiO₂/TiO₂ hybrid nanofibers were characterized through thermogravimetry (TG), X-ray diffraction (XRD) analysis, Brunauer–Emmett–Teller (BET) analysis, scanning electron microscopy (SEM), etc. XRD measurements indicated that doping of silica into TiO₂ nanofibers can delay the phase transition from anatase to rutile and decrease the grain size. SEM and BET characterization proved that silica doping can remarkably enhance the porosity of the SiO₂/TiO₂ hybrid nanofibers. The MB adsorption capacity and photocatalytic activity of the SiO₂/TiO₂ hybrid nanofibers were distinguished experimentally. It was found that, although increased silica doping content could enhance the MB adsorption capacity, the intrinsic photocatalytic activity gradually dropped. The SiO₂ (10 %)/TiO₂ composite nanofibers exhibited the highest MB degradation rate, being superior to SiO₂ (20 %)/TiO₂ or pure TiO₂.     

Using microwave along with TiO<Subscript>2</Subscript> for degradation of 4-chloro-2-nitrophenol in aqueous environment

In this project, microwave (MW) irradiation, photolysis, and photo catalyst were used for degradation of 4-chloro-2-nitro phenol (4-C2NP) in aqueous environment. The influence of main operating parameters such as initial pH, initial concentration of 4C2NP, power dissipation and the dosage of TiO2 on the degradation efficiency has been investigated. The optimum conditions was obtained such as initial concentration of 4C2NP at 30 mg L^?1, initial pH at 6, power dissipation at 16 W for UV irradiation, and the amount of TiO₂ at 0.2 g L^?1. The removal of 4C2NP and chemical oxygen demand (COD) after 100 min of reaction in the combined method (MW/UV/TiO₂) was obtained as 80.5% and 47.3%, respectively. Almost all processes are followed from the pseudo first order kinetics and the degradation rate of 4C2NP obeyed the following order: UV/TiO₂/MW > UV/TiO₂ > MW/UV > UV>MW.     

Optimized photocatalytic degradation of pefloxacin by TiO<Subscript>2</Subscript>/UV process

The photocatalytic degradation of pefloxacin was studied using modified TiO₂ as a photocatalyst. The effect of various parameters such as the amount of the photocatalyst, the initial concentration of pefloxacin, initial pH value on the process were investigated, and the optimal conditions were determined. The optimal amount of the photocatalyst is 0.3 g/L. The photodegradation rate of pefloxacin decreases with the increase of initial concentration. Alkaline medium is favorable for the photocatalytic degradation process. The primary photo-degradation products were analyzed by HPLC-ESI-MS/MS and thus the process mechanism was discussed.     

A P/N type compounded Cu<Subscript>2</Subscript>O/TiO<Subscript>2</Subscript> photo-catalytic membrane for organic pollutant degradation

A heterojunction thin film consisting of n-type titanium dioxide (TiO₂) and p-type cuprous oxide (Cu₂O) was fabricated on an FTO conducting glass. The TiO₂ films were grown on the FTO glass by sol–gel and spray pyrolysis methods, and Cu₂O was deposited on it via the hydrothermal method. The morphology, crystalline structure, and optical absorption characteristics were studied by scanning electron microscopy, X-ray diffraction, and ultraviolet–visible diffuse reflectance spectrum, respectively. The results show that the surface of the Cu₂O/TiO₂ film was composed of net and large grains, which contributed to a large specific surface area. The crystal phase of the TiO₂ in the Cu₂O/TiO₂ film remained anatase. The crystal phase of the Cu₂O could not be detected as it is found in traces. The Cu₂O/TiO₂ film had a stronger optical absorption ability than the pure TiO₂ film. To investigate catalytic activity, a photocatalytic degradation experiment of the Cu₂O/TiO₂ film was performed in a homemade thin-layer micro-reactor. The photocatalytic degradation of methylene blue increased with increasing amounts of deposited Cu₂O until a maximum limit was reached. The photocatalytic activity might have declined with an increase in Cu₂O content. The metallic oxide has the potential to screen other photocatalysts from the UV source.     

Degradation of organic compounds on TiO<Subscript>2</Subscript> photocatalysts prepared by a hydrothermal method in the presence of NH<Subscript>4</Subscript>F

TiO₂ photocatalysts were synthesized by a hydrothermal method from tetraisopropyl orthotitanate (TPOT) in the presence of NH₄F with different NH₄F/Ti molar ratios (0, 0.25, and 1). The formation of a well-crystallized anatase phase of TiO₂ and the suppression of phase transition to rutile were observed, even at high calcination temperature, owing to the effects of NH₄F. The TiO₂ synthesized hydrothermally with NH₄F exhibited absorption with a shift to the longer wavelengths of the visible-light region. The hydrothermally synthesized TiO₂ with a moderate amount of NH₄F exhibited high photocatalytic activity for the degradation of alcohol diluted in water under both UV-light and visible-light irradiations.     

Photocatalytic reaction of arylamines/alcohols on TiO<Subscript>2</Subscript> nano-particles

In this article, the photocatalytic reaction of aniline and 4-amino N,N-dimethyl aniline with methanol, ethanol and isopropanol on anatase TiO₂ nano-particles under UV (365-nm wavelength) irradiation was examined. The concentration of unreacted arylamines and products was measured by gas chromatography picks integration, and then the products were identified by mass spectroscopy analysis. By making a comparison within the rates of photocatalysis of each arylamine in different alcohols under various irradiation times, it was revealed that, in all cases, the sequence of photocatalysis rate was methanol > ethanol > isopropanol. In reactions where the concentrations of arylamine were lower than 10 mmol/l, imines were the main products and the alkylation of amines was not observed. In the higher concentration of arylamines, oxidation and dimerization was occurred.     

Chemical synthesis of Ni/TiO<Subscript>2</Subscript> nanophotocatalyst for UV/visible light assisted degradation of organic dye in aqueous solution

The Ni/TiO₂ nanoparticles with different Ni dopant content were prepared by a modified sol–gel method. The structure and photoinduced charge properties of the as-prepared catalysts were determined using X-ray diffraction, transmission electron microscopy, UV–vis diffuse reflectance spectroscopy and surface photovoltage spectroscopy techniques, and the photocatalytic efficiency of these catalysts was tested using an organic dye. It was shown that Ni modification could greatly enhance the photocatalytic efficiency of these nanocomposite catalysts by taking the photodegradation of methyl orange as a model reaction. With appropriate ratio of Ni and TiO₂, Ni/TiO₂ nanocomposites showed the superior photocatalytic activity than the single TiO₂ nanoparticles. Surface photovoltage spectra demonstrated that Ni modification could effectively inhibit the recombination of the photoinduced electron and holes of TiO₂. This electron–hole pair separation conditions are responsible for the higher photocatalytic performance of Ni/TiO₂ nanocomposites in the visible region of electromagnetic spectrum.