Copper(I)-catalyzed S-arylation of thiols with activated aryl chlorides on water

Copper chloride-catalyzed S-arylation of arenethiols is effected with activated aryl chlorides in neat water by using ethylenediamine as the pair ligand/base. This convenient, environmentally more friendly procedure for the coupling of aryl chlorides allows the arylation between sterically demanding coupling partners.     

A soluble base for the copper-catalyzed imidazole N-arylations with aryl halides

[reaction: see text] CuI-catalyzed N-arylation of imidazoles with aryl bromides has been achieved in a near-homogeneous system that utilizes tetraethylammonium carbonate as base, 8-hydroxyquinoline as ligand, and H2O as cosolvent. Preliminary results with aryl chlorides are also reported.     

Simple, Efficient Protocols for the Pd-Catalyzed Cross-Coupling Reaction of Aryl Chlorides and Dimethylamine

Simple and efficient procedures for the Pd-catalyzed cross-coupling reaction of aryl chlorides and dimethylamine are described. At room temperature with a strong base, t-BuXPhos is employed as the supporting ligand; at 110 °C with a weak base, XPhos is employed as the supporting ligand. In each of these cases, commercially available solutions constitute the source of the dimethylamine, and recently disclosed precatalysts constitute the source of the ligand and Pd. This work further expands the utility of these precatalysts in reactions that benefit from an easily activated source of L(1)Pd(0).     

Air stable,sterically hindered ferrocenyl dialkylphosphines for palladium-catalyzed C[bond]C,C[bond]N,and C[bond]O bond-forming cross-couplings

Pentaphenylferrocenyl di-tert-butylphosphine has been prepared in high yield from a two-step synthetic procedure, and the scope of various cross-coupling processes catalyzed by complexes bearing this ligand has been investigated. This ligand creates a remarkably general palladium catalyst for aryl halide amination and for Suzuki coupling. Turnovers of roughly 1000 were observed for aminations with unactivated aryl bromides or chlorides. In addition, complexes of this ligand catalyzed the formation of selected aryl ethers under mild conditions. The reactions encompassed electron-rich and electron-poor aryl bromides and chlorides. In the presence of catalysts containing this ligand, these aryl halides coupled with acyclic or cyclic secondary alkyl- and arylamines, with primary alkyl- and arylamines, and with aryl- and primary alkylboronic acids. These last couplings provide the first general procedure for reaction of terminal alkylboronic acids with aryl halides without toxic or expensive bases. The ligand not only generates highly active palladium catalysts, but it is air stable in solution and in the solid state. Palladium(0) complexes of this ligand are also air stable as a solid and react only slowly with oxygen in solution.     

A novel P,O-type phosphorinane ligand for the Suzuki–Miyaura cross-coupling of aryl chlorides

The Pd-mediated Suzuki–Miyaura cross-coupling of substituted and unsubstituted aryl chlorides with phosphorinane ligands was investigated uncovering an interesting ligand effect. The scope of the most effective 4-hydroxyl-substituted phosphorinane ligand in Suzuki cross-coupling with challenging aryl chlorides is described.     

Synthesis of Phenols: Organophotoredox/Nickel Dual Catalytic Hydroxylation of Aryl Halides with Water

A highly effective hydroxylation reaction of aryl halides with water under synergistic organophotoredox and nickel catalysis is reported. The OH group of the resulting phenols originates from water, following deprotonation facilitated by an intramolecular base group on the ligand. Significantly, aryl bromides as well as less reactive aryl chlorides served as effective substrates to afford phenols with a wide range of functional groups. Without the need for a strong inorganic base or an expensive noble‐metal catalyst, this process can be applied to the efficient preparation of diverse phenols and enables the hydroxylation of multifunctional pharmaceutically relevant aryl halides.     

Highly active palladium catalysts supported by bulky proazaphosphatrane ligands for Stille cross-coupling: coupling of aryl and vinyl chlorides, room temperature coupling of aryl bromides, coupling of aryl triflates, and synthesis of sterically hindered biaryls

A family of proazaphosphatrane ligands [P(RNCH2CH2)2N(R'NCH2CH2): R = R' = i-Bu, 1; R = Bz, R' = i-Bu, 3; R = R' = Bz, 4] for palladium-catalyzed Stille reactions of aryl chlorides is described. Catalysts derived from ligands 1 and 4 efficiently catalyze the coupling of electronically diverse aryl chlorides with an array of organotin reagents. The catalyst system based on the ligand 3 is active for the synthesis of sterically hindered biaryls (di-, tri-, and tetra-ortho substituted). The use of ligand 4 allows room-temperature coupling of aryl bromides and it also permits aryl triflates and vinyl chlorides to participate in Stille coupling.     

Direct N‐Arylation of Azaheterocycles with Aryl Halides under Ligand‐free Condition

A simple and efficient C? N cross‐coupling method of aryl halides with various heterocycles was reported, by using 10 mol% of CuI as catalyst and 1.2 equiv. NaH as base. Aryl iodides, aryl bromides and many substituted aryl chlorides could efficiently react with heterocycles, providing variety of N‐arylated products in good to excellent yields. The ligand‐free catalyst system was stable in air and could be readily reused.     

Synthesis of primary aromatic amides by aminocarbonylation of aryl halides using formamide as an ammonia synthon

Primary aromatic amides were prepared by a palladium-catalyzed aminocarbonylation reaction of aryl halides in high yields (70-90%) using formamide as the amine source. The reactions require a palladium catalyst in combination with a nucleophilic Lewis base such as imidazole or 4-(dimethylamino)pyridine (DMAP). Aryl, heteroaryl, and vinyl bromides and chlorides were converted to the primary amides under mild conditions (5 bar, 120 degrees C) using 1 mol % of a palladium-phosphine complex. Best results were obtained in dioxane using triphenylphosphine as the ligand and DMAP as the base. For activated aryl bromides, a phosphine-to-palladium ratio of 2:1 was sufficient, but less reactive aryl bromides or aryl chlorides required ligand-to-palladium ratios up to 8:1 in order to stabilize the catalyst and achieve full conversion. The influence of catalyst, base, solvent, pressure, and temperature was studied in detail. The mechanism of the reaction could be clarified by isolating and identifying the reaction intermediates. In addition, methylamides and dimethylamides were prepared by the same method using N-methylformamide and N,N-dimethylformamide as the amine source.     

N-hydroxyimides as efficient ligands for the copper-catalyzed N-arylation of pyrrole, imidazole, and indole

An experimentally simple, efficient, and inexpensive catalyst system was developed for the N-arylation of pyrroles, indoles, and imidazole with aryl and heteroaryl iodides, bromides, and chlorides by applying CuI as catalyst, N-hydroxysuccinimide (L1), N-hydroxymaleimide (L2), or N-hydroxyphthalimide (L3) as ligand, CH3ONa as base, and DMSO as solvent. A variety of functional groups are tolerated in the reaction, including those that are not compatible with Pd-catalyzed amidation methodology.     

Palladium/phosphite catalyst systems for efficient cross coupling of aryl bromides and chlorides with phenylboronic acid

The Suzuki reaction of aryl bromides is efficiently catalyzed by palladium/ phosphite complexes generated in situ. The influence of ligand, base, and different additives is examined. The process tolerates various functional groups and catalyst turnover numbers up to 820,000 are obtained even with deactivated aryl bromides. For the first time it is shown that palladium/phosphite complexes also catalyze efficiently the Suzuki reaction of aryl chlorides.     

Highly efficient synthesis of phenols by copper-catalyzed hydroxylation of aryl iodides, bromides, and chlorides

8-Hydroxyquinolin-N-oxide was found to be a very efficient ligand for the copper-catalyzed hydroxylation of aryl iodides, aryl bromides, or aryl chlorides under mild reaction conditions. This methodology provides a direct transformation of aryl halides to phenols and to alkyl aryl ethers. The inexpensive catalytic system showed great functional group tolerance and excellent selectivity.     

Amination reactions of aryl halides with nitrogen-containing reagents mediated by palladium/imidazolium salt systems.

Nucleophilic N-heterocyclic carbenes have been conveniently used as catalyst modifiers in amination reactions involving aryl chlorides, aryl bromides, and aryl iodides with various nitrogen-containing substrates. The scope of a coupling process using a Pd(0) or Pd(II) source and an imidazolium salt in the presence of a base, KO(t)Bu or NaOH, was tested using various substrates. The Pd(2)(dba)(3)/IPr.HCl (1, IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) system presents the highest activity with respect to electron-neutral and electron-rich aryl chlorides. The ligand is also effective for the synthesis of benzophenone imines, which can be easily converted to the corresponding primary amines by acid hydrolysis. Less reactive indoles were converted to N-aryl-substituted indoles using as supporting ligand the more donating SIPr.HCl (5, SIPr = 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene). The Pd(OAc)(2)/SIPr.HCl/NaOH system is efficient for the N-arylation of diverse indoles with aryl bromides. The general protocol developed has been applied successfully to the synthesis of a key intermediate in the synthesis of an important new antibiotic. Mechanistically, palladium-to-ligand ratio studies strongly support an active species bearing one nucleophilic carbene ligand.     

High turnover number and rapid, room-temperature amination of chloroarenes using saturated carbene ligands

[equation--see text] A catalytic system for the mild amination of aryl chlorides is described. This system consists of a Pd(0) precursor and a dihydroimidazoline carbene ligand, which is generated in situ from its protonated tetrafluoroborate salt (2). Using this catalyst, aryl and heteroaryl chlorides react with secondary amines and anilines within hours at room temperature. Turnover numbers as high as 5000 are obtained at elevated temperatures for reaction of morpholine with an unactivated aryl chloride.     

Scope and limitations of Pd2(dba)3/P(i-BuNCH2CH2)3N-catalyzed Buchwald-Hartwig amination reactions of aryl chlorides

Proazaphosphatrane ligands in combination with Pd(2)(dba)(3) generate highly active catalysts for Buchwald-Hartwig amination of aryl chlorides. In particular, commercially available P(i-BuNCH(2)CH(2))(3)N is a highly general and efficient ligand, allowing the coupling of an electronically diverse set of aryl chlorides, including chloropyridines, with a wide variety of amines using 1 mol % of Pd at 100 degrees C. Either a 1:1 or 2:1 ratio of ligand to Pd was found to be effective. This catalyst system performs exceptionally well for sterically hindered substrates, even with only 0.25 mol % of Pd. It is shown that NaOH can also be used as the base (instead of NaO-t-Bu) allowing functionalized substrates to participate in these reactions.     

Palladium-catalyzed arylation of malonates and cyanoesters using sterically hindered trialkyl- and ferrocenyldialkylphosphine ligands.

Palladium-catalyzed reactions of aryl bromides and chlorides with two common stabilized carbanions-enolates of dialkyl malonates and alkyl cyanoesters-are reported. An exploration of the scope of these reactions was conducted, and the processes were shown to occur in a general fashion. Using P(t-Bu)(3) (1), the pentaphenylferrocenyl ligand (Ph(5)C(5))Fe(C(5)H(4))P(t-Bu)(2) (2), or the adamantyl ligand (1-Ad)P(t-Bu)(2) (3), reactions of electron-poor and electron-rich, sterically hindered and unhindered aryl bromides and chlorides were shown to react with diethyl malonate, di-tert-butyl malonate, diethyl fluoromalonate, ethyl cyanoacetate, and ethyl phenylcyanoacetate. Although alkyl malonates and ethyl alkylcyanoacetates did not react with aryl halides using these catalysts, the same products were formed conveniently in one pot from diethylmalonate by cross-coupling of an aryl halide in the presence of excess base and subsequent alkylation.     

Excellent Suzuki–Miyaura catalytic activity of a new Pd(II) complex with sulfonamide–Schiff base ligand

A new air‐stable Pd(II) complex containing a sulfonamide–Schiff base ligand has been synthesized, characterized and investigated as a catalyst for the Suzuki–Miyaura reactions of aryl halides with arylboronic acids. Theoretical calculations (B3LYP) and spectroscopic evidence suggest that the sulfonamide–Schiff base coordinates to the Pd centre through sulfonamide nitrogen (? SO₂NH₂) rather than imine (? CH?N). The complex shows excellent cross‐coupling activity with aryl bromides in water at room temperature and aryl chlorides in isopropanol at 60°C. Copyright © 2016 John Wiley & Sons, Ltd.     

Efficient nickel-mediated intramolecular amination of aryl chlorides

The use of an in situ generated Ni(0) catalyst associated with 2,2'-bipyridine or N,N'-bis(2,6-diisopropylphenyl)dihydroimidazol-2-ylidene (SIPr) as a ligand and NaO-t-Bu as the base for the intramolecular coupling of aryl chlorides with amines is described. The procedure has been applied to the formation of five-, six-, and seven-membered rings. [reaction: see text]     

9-fluorenylphosphines for the Pd-catalyzed sonogashira, suzuki, and Buchwald-Hartwig coupling reactions in organic solvents and water

The lithiation/alkylation of fluorene leads to various 9-alkyl-fluorenes (alkyl=Me, Et, iPr, -Pr, -C18H25) in>95% yields, for which lithiation and reaction with R2PCl (R=Cy, iPr, tBu) generates 9-alkyl, 9-PR2-fluorenes which constitute electron-rich and bulky phosphine ligands. The in-situ-formed palladium-phosphine complexes ([Na2PdCl4], phosphonium salt, base, substrates) were tested in the Sonogashira, Suzuki, and Buchwald-Hartwig reactions of aryl chlorides and aryl bromides in organic solvents. The Sonogashira coupling of aryl chlorides at 100-120 degrees C leads to>90% yields with 1 mol% of Pd catalyst. The Suzuki coupling of aryl chlorides typically requires 0.05 mol% of Pd catalyst at 100 degrees C in dioxane for quantitative product formation. To carry out "green" cross-coupling reactions in water, 9-ethylfluorenyldicyclohexylphosphine was reacted in sulphuric acid to generate the respective 2-sulfonated phosphonium salt. The Suzuki coupling of activated aryl chlorides by using this water-soluble catalyst requires only 0.01 mol% of Pd catalyst, while a wide range of aryl chlorides can be quantitatively converted into the respective coupling products by using 0.1-0.5 mol% of catalyst in pure water at 100 degrees C. Difficult substrate combinations, such as naphthylboronic acid or 3-pyridylboronic acid and aryl chlorides are coupled at 100 degrees C by using 0.1-0.5 mol% of catalyst in pure water to obtain the respective N-heterocycles in quantitative yields. The copper-free aqueous Sonogashira coupling of aryl bromides generates the respective tolane derivatives in>95% yield.     

One-pot Pd/C catalysed 'domino' HALEX and Sonogashira reactions: a ligand- and Cu-free alternative

The advantages of combining heterogeneous catalysis and aryl chloride substrates for cross-coupling are introduced. A heterogeneous Pd/C catalyst is used for activating aryl bromides and electron withdrawing aryl chlorides via a one-pot 'domino' HALEX-Sonogashira reaction. No ligand or co-catalyst is required, and the cross-coupling products are obtained in moderate to good yields. The influence of the solvent, base, iodide source and catalyst is evaluated. The catalyst is reusable for at least six consecutive reaction cycles. A variation on this reaction using catalytic amounts of KI is also proposed.