Twisted, Z-shaped perylene bisimide

The first derivative of a new class of perylene bisimide chromophores, N,N'-bis(octyl)-3,9-bis(phenyl)perylene-1,2,7,8-tetracarboxyl bisimide, 1, has been synthesized and its fundamental photophysical and electrochemical properties assessed. The extended, Z-shaped structure was achieved by use of the classic photoenolization of an o-methylbenzophenone analogue, 1,5-dibenzoyl-9,10-dihydroanthracene, and in situ Diels-Alder trapping of the resulting o-xylylenol intermediates with N-octylmaleimide. Subsequent dehydration and aromatization of the resulting bisadduct afforded 1. In dichloromethane, bisimide 1 has an absorption lambdamax at 491 nm (epsilon = 29,600 M-1 cm-1), a fluorescence lambdamax at 517 nm with a high quantum yield (Phi = 0.70), and a single-exponential fluorescence decay (tau = 5.01 ns). Pure crystals of 1 have red emission, suggesting exciplex formation in the solid state. X-ray crystallographic analysis of 1 revealed significant twisting of its perylene core.     

Exciton trapping in pi-conjugated materials: a quantum-chemistry-based protocol applied to perylene bisimide dye aggregates

Access to excited-state structures and dynamics of pi-chromophor aggregates is needed to understand their fluorescence behavior and the properties of related materials. A quantum-chemistry-based protocol that provides quantitative and qualitative insight into fluorescence spectra has been applied to perylene bisimide dimers and provides excellent agreement with measured fluorescence spectra. Both dispersion and dipol-dipole interactions determine the preferred relative arrangements of the chromophores in ground and excited states of the dimer. An exciton trapping mechanism is identified, which may limit the energy transfer properties of perylene bisimide and other dye materials.     

Energy transfer in calixarene-based cofacial-positioned perylene bisimide arrays

The synthesis of multichromophoric perylene bisimide-calix[4]arene arrays with up to five perylene units (containing orange, violet, and green perylene bisimide chromophores) and of monochromophoric model compounds was achieved by subsequent imidization of mono-Boc functionalized calix[4]arene linkers with three different types of perylene bisimide dye units. The optical properties of all compounds were studied with UV/vis absorption and steady state and time-resolved fluorescence spectroscopy. Upon excitation of the inner orange dye at 490 nm of array 3, strong fluorescence emission of the outer green perylene bisimide (PBI) chromophore at 744 nm is observed. The fluorescence excitation spectra of compounds 3 and 4 (lambdadet = 850 nm) show all absorption bands of the parent chromophores (e.g., all perylene units contribute to the emission from S1 state of the green PBI). Thus, the fluorescence emission and excitation spectra as well as time-resolved data of fluorescence lifetimes in the absence (tauD = 5.1 ns) and in the presence of an acceptor (tauDA = 0.8 ns) suggest efficient energy transfer processes between the perylene bisimide dye units. For the bichromophoric array 4, the energy transfer rate is calculated to a value of 1.05 x 109 s-1. These results demonstrate highly efficient energy transfer in cofacially assembled dye arrays.     

Molecular assemblies of perylene bisimide dyes in water

Perylene bisimides are among the most valuable functional dyes and have numerous potential applications. As a result of their chemical robustness, photostability, and outstanding optical and electronic properties, these dyes have been applied as pigments, fluorescence sensors, and n‐semiconductors in organic electronics and photovoltaics. Moreover, the extended quadrupolar π system of this class of dyes has facilitated the construction of numerous supramolecular architectures with fascinating photophysical properties. However, the supramolecular approach to the formation of perylene bisimide aggregates has been restricted mostly to organic media. Pleasingly, considerable progress has been made in the last few years in developing water‐soluble perylene bisimides and their application in aqueous media. This Review provides an up‐to‐date overview on the self‐assembly of perylene bisimides through π–π interactions in aqueous media. Synthetic strategies for the preparation of water‐soluble perylene bisimides and the influence of water on the π–π stacking of perylene bisimides as well as the resulting applications are discussed.     

Gelation of a highly fluorescent urea-functionalized perylene bisimide dye

[structure: see text] A urea-containing tetraphenoxy-substituted perylene bisimide has been synthesized, and its gelation ability has been studied. This functional dye forms fluorescent organogels in toluene and tetrachloromethane through self-assembly by hydrogen-bonding and pi-pi-stacking interactions. AFM and confocal laser scanning microscopy reveal the formation of fiberlike aggregates.     

Assembly of DNA triangles mediated by perylene bisimide caps

Perylene bisimides (PBI) have been synthetically incorporated as caps onto a Y-shaped DNA triple strand. These PBI caps serve as "sticky" ends in the spontaneous assembly of larger DNA ensembles, linking the triangular DNA through stacking interactions. This, in turn, yields a hypsochromic shift in the absorption and a red shift in the fluorescence as characteristic optical readouts. This assembly occurs spontaneously without any enzymatic ligation process and without the use of overhanging DNA as sticky ends. Instead, dimerizations of the PBI chromophores in the assembly are controlled by the DNA as a structural scaffold. Thereby, the PBI-driven assembly is fully reversible. Due to the fact that PBI dimerization does not occur in the single strand, the aggregates can be destroyed by thermal dehybridization of the DNA scaffold and reassembled by reannealing of the DNA construct. In view of the fact that PBI forms stable radical anions, the presented DNA architectures are not only interesting optical biomaterials, but are also promising materials for molecular electronics with DNA.     

Preparation and electronic characteristics of anionic perylene bisimide films

Neutral perylene bisimides(PBI) are well-known n-type organic semiconductors, with number of challenging electronic properties in their neutral and reduced states. We report the characteristic electronic properties of PBI anionic films. We unexpectedly discovered that pristine PBI dianion film showed p-type character, while oxidized dianion film(dominant neutral state with few radical anions) showed normal n-type semiconductor character based on Seebeck effect measurements. Both kinds of films exhibit high electrical conductivity with a potential for thermoelectric applications. The mechanism of polarity reversal is proposed.     

Synthesis of highly fluorescent and water soluble perylene bisimide

Designed and synthesized a new highly water soluble N,N¹-bis（2-（（5-（（dimethylamino）methyl）furan-2-yl）methylthio）ethyl）-perylene -3,4,9,10-tetracarboxylic diimide from 2-（（5-（（dimethylamino）methyl）furan-2-yl）methylthio）ethanamine and perylene-3,4,9,10- tetracarboxylic dianhydride.The compound was characterized by ¹H,¹³C,2D NMR,mass and IR techniques.The compound is highly fluorescent with good solubility in water and other polar solvents.     

Solution processable hydrogen-bonded perylene bisimide assemblies organizing into lamellar architectures

A ditopic melamine bearing perylene bisimides with swallow-tail alkyl chains can be dissolved in organic solvents by mixing with complementary hydrogen-bonding barbiturate or cyanurate, forming solution processable supramolecular assemblies. Upon spin-coating the assemblies, highly organized lamellar architectures are formed with thermal annealing, which act as electron transporting layers in organic field effect transistors.     

S-heterocyclic annelated perylene bisimide: synthesis and co-crystal with pyrene

An S-heterocyclic annelated perylene bisimide (PBI) has been prepared from readily available tetrachloro-PBI by a one-step palladium-catalyzed reaction; when co-crystallized with pyrene it gives a unique columnar arrangement of 1 : 2 complexes.     

Self-trapping limited exciton diffusion in a monomeric perylene crystal as revealed by femtosecond transient absorption microscopy

Self-trapping and singlet-singlet annihilation of the free excitons in a monomeric (beta) perylene crystal were studied by using femtosecond transient absorption microscopy. The free exciton generated by the photo-excitation of the beta-perylene crystal relaxed to the self-trapped exciton with a rate constant of 7 x 10(10) s(-1). The singlet-singlet annihilation of the free exciton observed under the high excitation density conditions was competed with the self-trapping of the free exciton; we estimated the annihilation rate constant for the free exciton to be 1 x 10(-8) cm(3) s(-1) from the excitation density dependence of the free exciton decay. After self-trapping of the free exciton, no annihilation was observed in the 100 ps time range, suggesting that the diffusion coefficient was reduced drastically by self-trapping. The results show that the major factor limiting the exciton diffusion in the beta-perylene crystal is a relaxation of the free exciton to the self-trapped exciton, and not the lifetime of the exciton. Though the singlet-singlet annihilation rate constants and fluorescence lifetime of the beta-perylene crystal are similar to those of the anthracene crystal, the estimated exciton diffusion length (2 nm) in the beta-perylene crystal is much smaller than that (100 nm) in the anthracene crystal as a result of the exciton self-trapping.     

One-dimensional luminescent nanoaggregates of perylene bisimides

A new perylene bisimide dye has been synthesized which self-assembles into columnar nanoaggregates and liquid crystalline mesophases with striking photoluminescent properties.     

Synthesis and thermal polymerization of perylene bisimide containing benzocyclobutene groups

Fourfold benzocyclobutene-functionalized perylene bisimide（PBI 4） has been synthesized and its structure was characterized by FTIR,MS and NMR.PBI 4 can react either with itself,or the appropriate dienophiles to form the corresponding products under appropriate temperature.The polymer film obtained from the reaction of PBI 4 with methyl vinyl silicone rubber possessed excellent film forming properties including flatness.The optical properties of PBI 4 and polymer film obtained from the reaction of PBI 4 and methyl vinyl silicone rubber have been determined by UV/vis and fluorescence spectroscopy.     

Photoluminescence and conductivity of self-assembled pi-pi stacks of perylene bisimide dyes

The self-assembly of a new, highly fluorescent perylene bisimide dye 2 into pi stacks, both in solution and condensed phase, has been studied in detail by NMR spectroscopy, vapor pressure osmometry (VPO), UV/Vis and fluorescence spectroscopy, differential scanning calorimetry (DSC), optical polarizing microscopy (OPM) and X-ray diffraction. The NMR and VPO measurements revealed the formation of extended pi-pi stacks of the dye molecules in solution. The aggregate size determined from VPO and DOSY NMR measurements agree well with that obtained from the concentration and temperature-dependent UV/Vis spectral data by employing the isodesmic model (equal K model). In the condensed state, dye 2 possesses a hexagonal columnar liquid crystalline (LC) phase as confirmed by X-ray diffraction analysis. The columnar stacking of this dye has been further explored by atomic force microscopy (AFM). Well-resolved columnar nanostructures of the compound are observed on graphite surface. A color-tunable luminescence from green to red has been observed upon aggregation which is accompanied by an increase of the fluorescence lifetime and depolarization. The observed absorption properties can be explained in terms of molecular exciton theory. The charge transport properties of dye 2 have been investigated by pulse radiolysis-time resolved microwave conductivity measurements and a 1D charge carrier mobility up to 0.42 cm(2) V(-1) s(-1) is obtained. Considering the promising self-assembly, semiconducting, and luminescence properties of this dye, it might serve as a useful functional material for nano(opto)electronics.     

Synthesis and properties of novel functional polymers from tetrachlorinated perylene bisimide

Asymmetric tetrachlorinated perylene‐3,4,9,10‐tetracarboxylic acid bisimides (4Cl‐PBI) were prepared in one‐pot by a reaction of tetrachlorinated perylene‐3,4,9,10‐tetracarboxylic acid dianhydride with a mixture of 2‐aminoethanol and dodecanamine or 2‐decyltetradecan‐1‐amine. Then, two 4Cl‐PBI methacrylates bearing one (M1) and two (M2) long alkyl tails were prepared, and a series of functional homopolymers were obtained by subjecting conventional radical polymerization and atom transfer radical polymerization. Furthermore, amphiphilic block copolymers pendent with 4Cl‐PBI units, PEO‐PM1 and PEO‐PM2, were prepared using monomethoxyl PEO bromoisobutyrate as a macroinitiator. Size exclusion chromatography, UV–vis spectroscopy, fluorescence spectroscopy, and cyclic voltammetry have been applied to characterize the polymers obtained. Moreover, the Ullmann reactions between the grafted 4Cl‐PBI units were conducted to form large π units, and the PEO‐PM2 block copolymers gave di‐ or tri‐PBI units in about 30%. Also, self‐assembly of the amphiphilic block copolymers PEO‐PM1 and PEO‐PM2 in water was applied to generate spherical nanoparticles of 4Cl‐PBI. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Functional organogels from highly efficient organogelator based on perylene bisimide semiconductor

A new n-type semiconducting perylene bisimide dye has been synthesized that gelates a broad variety of organic solvents to afford well-defined nano- and mesoscopic helical fibers and bundles.     

Preparation and characterization of regioisomerically pure 1,7-disubstituted perylene bisimide dyes

A detailed study on bromination and subsequent imidization of perylene bisanhydride with cyclohexylamine is reported. The present results reveal that previously reported 1,7-difunctionalized perylene bisimides are presumably contaminated with the respective 1,6 regioisomers. N,N'-Dicyclohexyl-1,7-dibromoperylene bisimide 1,7-3 is obtained for the first time in isomerically pure form, and its structure is unequivocally confirmed by X-ray analysis. By using regioisomerically pure 1,7-dibromoperylene bisimide 1,7-3, 1,7-dipyrrolidinylperylene bisimides 4a-c and 1,7-dipyrrolidinylperylene bisanhydride 5 as well as the unsymmetrically difunctionalized 1-bromo-7-pyrrolidinyl- and 1-cyano-7-pyrrolidinylperylene bisimides 7 and 8 are synthesized in good yield.     

Ethynyl-linked perylene bisimide based electron acceptors for non-fullerene organic solar cells

Star-shaped electron acceptors based on perylene bisimide as end groups and spiro-aromatic core linked with ethynyl units were developed for nonfullerene solar cells. Ethynyl linkers are able to improve the planarity of conjugated backbone, resulting in enhanced electron mobility and power conversion efficiency in solar cells.     

Photoluminescent supramolecular polymers: metal-ion directed polymerization of terpyridine-functionalized perylene bisimide dyes

Perylene bisimide dyes bearing one and two 2,2':6',2"-terpyridine receptor groups were prepared and the structural and optical properties of their Zn2+ complexes were investigated by 1H NMR and fluorescence experiments.