Determination of hydroxylamine using a carbon paste electrode modified with graphene oxide nano sheets

A carbon paste electrode that was chemically modified with 3-(4'-amino-3'-hydroxy-biphenyl-4-yl)-acrylic acid (3,4-AA) was used as a selective electrochemical sensor for the detection of hydroxylamine. Cyclic voltammetry (CV), choronoamperometry (CHA) and square wave voltammetry (SWV) were used to investigate oxidation of hydroxylamine in aqueous solution. Under optimized concentration the electrocatalytic oxidation current peak for hydroxylamine increased linearly with concentration in the range of 0.025–10.0 μM. The detection limits for hydroxylamine was 0.012 μM. Finally, the modified electrode was applied to detection hydroxylamine in water samples.     

Oxidation of hydroxylamine by ferricyanide in presence of zinc sulfate: A rapid method for estimating hydroxylamine and hydrazine in a mixture

The direct titration of alkaline ferricyanide in presence of zinc sulfate with hydroxylamine sulfate has been studied. A clear white precipitate of zinc potassium ferrocyanide indicates the end-point. Hydroxylamine is oxidized to nitric acid and water, and millingram-quaantities of hydroxylamine; can be determinred. In the absence of zinc sulfate and in weakly alkaline medium, hydrazine and hydroxylamine are converted to nitrogen, while in presence of zine sulfate hydrazine is oxidized to nitrogen By ferricyanide oxidation of a mixed sample uinler different conditions, hydrarine and hydroxylamine when present together can be determined rapidly.     

Indirect voltammetric determination of trace hydroxylamine using magnetic microspheres

A new indirect voltammetric method for the determination of hydroxylamine is described. It is based on the reduction of an electroactive derivative of hydroxylamine on the surface of a magnetic electrode. The electroactive derivative produced by hydroxylamine reacted with magnetic polymer microspheres containing carbonyl groups on the surface. The experimental conditions are discussed. It was found that the peak potential (Ep) of the derivative was -0.46 V (vs. Ag/AgCl) under optimum conditions. Hydroxylamine could be determined in the range of 5-2,000 microg l(-1) with the detection limit of 2 microg l(-1) and relative standard deviation for the determination of 100 microg l(-1) hydroxylamine was 2.35%. Satisfactory results were obtained for the determination of hydroxylamine in aqueous medium.     

Spectrophotometric determination of hydroxylamine and its derivatives in pharmaceuticals

A sensitive spectrophotometric method for the determination of hydroxylamine is described. The method is based on the oxidation of hydroxylamine to nitrite using sodium arsenate under alkaline condition. The formed nitrite is determined based on the diazo coupling reaction between p-nitroaniline and N-(1-naphthyl)ethylenediamine dihydrochloride [NEDA]. The system obeys Beer's law over the concentration range 0-7 microg of hydroxylamine at 545 nm and the colour is stable for 3 h. The molar absorptivity of the colour system is found to be 6.7 x 10(4) l mol(-1) cm(-1). The relative standard deviation is 1.2% for ten determinations at 4 microg of hydroxylamine. Interferences due to various foreign ions have been studied and the method has been applied to the determination of hydroxylamine and its derivatives used in pharmaceutical formulations after hydrolysis.     

An approach for decontamination of beta-lactam antibiotic residues or contaminants in the pharmaceutical manufacturing environment

An effective procedure for decontamination of beta-lactam antibiotic residues or contaminants in the pharmaceutical manufacturing environment was investigated. Decontamination with solutions of hydrochloric acid, sodium hydroxide, hydrogen peroxide and hydroxylamine as agents for degradation was assessed. According to the results, the beta-lactam antibiotics were significantly degraded with sodium hydroxide and hydroxylamine. From the structural analysis of the degradation products of a cephem antibiotic, cefpodoxime proxetil, it was found that hydroxylamine degraded the beta-lactam structure under mild conditions, while sodium hydroxide did not. Therefore, hydroxylamine was considered an appropriate decontamination agent for beta-lactam antibiotics.     

Chemiluminescence Sensor for the Determination of Hydroxylamine by Electrostatically Immobilizing Luminol and Periodate

IntroductionAnalytical methods based on chemilumi-nescence( CL ) reactions have received considerableattention for theirapplication in various fields,ow-ing to their extremely high sensitivity along withother advantages such as wide linear dynamicrange,simple instrumentation,easy miniaturiza-tion and coupling to various separation tech-niques[1— 6] .CL sensors have been developed for be-ing used as the continuous and real- time monitorsof inorganic,organic,biological and pharmaceuti-cal comp…     

Synthesis of 3- and 5-amino-5-(3)-(pyrrol-2-yl)isoxazoles

5-Amino-3-(pyrrol-2-yl)isoxazoles were selectively prepared by the reaction of 2-(2,2-dicyano-1-ethylthioethenyl)pyrroles with hydroxylamine in methanol. Under analogous conditions, 2-(2-carbamoyl-2-cyano-1-ethylthioethenyl) pyrroles with hydroxylamine gave 5-aminoisoxazoles and their structural isomers, 3-aminoisoxazoles (3-5% yield). The latter were selectively prepared by reacting 2-(2-carbamoyl-2-cyano-1-ethylthioethenyl)pyrroles with hydroxylamine in the presence of aqueous NaOH and from the products of intramolecular cyclization of 2-(2-carbamoyl-2-cyano-1-ethylthioethenyl)pyrroles, 1-ethylthio-3-iminopyrrolizines and hydroxylamine.     

紫尿酸–Fe(Ⅲ)分光光度法测定盐酸羟胺

在碱性介质及溴化十六烷基吡啶存在条件下,盐酸羟胺与Fe(Ⅲ)–紫尿酸体系发生显色反应形成离子缔合物,该离子缔合物在635 nm波长处有一个吸收峰,其表观摩尔吸光系数ε=2.05×104 L/(mol·cm),据此建立了测定盐酸羟胺的间接分光光度法。盐酸羟胺的质量浓度在0~2.4 mg/L范围内与吸光度与呈良好的线性,线性相关系数r=0.999 8,方法的检出限为0.01 mg/L。将该方法用于盐酸羟胺的测定,其测定结果与国标法测定结果相吻合,加标回收率为95.0%~104.0%,测定结果的相对标准偏差为0.51%~1.29%(n=5)。该方法灵敏度高,操作简便,可用于盐酸羟胺含量测定。     

Indirect kinetic spectrophotometric determination of hydroxylamine based on its reaction with iodate.

A simple, precise and accurate method is proposed for rapid determination of trace amounts of hydroxylamine based on the reaction of hydroxylamine with iodate in acidic media. The reaction of neutral red by the produced nitrite ion was used to monitor the reaction spectrophotometrically at 525 nm by a fixed time method. Hydroxylamine in the range of 0.0400-1.200 microg mL(-1) could be determined. The relative standard deviation for 10 determinations of 0.500 microg mL(-1) hydroxylamine was 1.81% and the limit of detection was 0.010 microg mL(-1). The proposed method was applied to the determination of hydroxylamine in water samples with satisfactory results.     

Comparison of the thermal decomposition behavior for members of the hydroxylamine family

In the present work the thermal stability of some members of the hydroxylamine family was studied using adiabatic calorimetry. The study included aqueous solutions of hydroxylamine free base, hydroxylamine hydrochloride, hydroxylamine sulfate, and hydroxylamine-o-sulfonic acid of concentrations typically used in industry. Also, the catalytic effect of metal surfaces of stainless steel, carbon steel, and titanium was studied. From the solutions studied HA is the most reactive with higher maximum temperature, pressure, non-condensable pressure, and lower time to maximum rate. HA maximum heat rate is at least ∼3 times higher than that of the other solutions studied, and the pressure generation rate is ∼13 times higher. All decompositions were catalyzed by stainless steel, but only HA was catalyzed significantly by titanium metal. Solid hydroxylamine hydrochloride, hydroxylamine sulfate, and hydroxylamine-o-sulfonic acid exhibited stability up to ∼60 °C. Hydroxylamine 100% was not studied because it is not readily available, is not used industrially, and is known to be unstable at room temperature. A violent reaction was measured for solid hydroxylamine sulfate that generated a heat rate >500 °C/min and pressure rate >5200 psia/min before the sample cell was completely destroyed by the generated pressure.     

Electrocatalytic Characteristics of Hydrazine and Hydroxylamine Oxidation at Coumestan Modified Carbon Paste Electrode

A coumestan derivative modified carbon paste electrode (CMCPE) was used as a sensitive electrochemical sensor for determination of electrocatalytic of hydrazine and hydroxylamine. The mechanism of electrocatalytic oxidation of both hydrazine and hydroxylamine using CMCPE was investigated by cyclic voltammetry and polarization studies. The kinetic parameters such as the electron transfer coefficient, α, heterogeneous rate constant, k′, and exchange current density, j₀, for oxidation of hydrazine and hydroxylamine at the CMCPE surface were determined using cyclic voltammetry. Further more, the linear dynamic range, sensitivity and limit of detection for hydrazine and hydroxylamine detections were evaluated using differential pulse voltammetry.     

General and Efficient Synthesis of O-Sulfonylhydroxylamine Derivatives

A general and efficient synthetic route to O-sulfonylhydroxylamine derivatives is described. The approach involves acylation of hydroxylamine with benzyl chloroformate to give N-carbobenzoxy hydroxylamine, followed by sulfonation and hydrogenolysis to give products.     

Mechanism of the mutagenic action of hydroxylamine

The reaction of hydroxylamine and O-methylhydroxylamine with cytidine 5-di- and triphosphates gave nucleoside di- and triphosphates containing hydroxylamine and O-methylhydroxylamine residues in the heterocyclic ring. At low temperatures, high pH values, and high hydroxylamine concentrations, the chief products are 4,6-dihydroxylamino-5,6-dihydro-2(1H)-pyrimidinone derivatives, while 4-hydroxylamino-2(1H)-pyrimidinone derivatives are primarily formed when the temperature is raised and the pH and hydroxylamine concentration are lowered.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 700–704, May, 1972.     

Hydroxylamine Reactions with Peroxide Products of Alkenes Ozonolysis

Reactions were studied of peroxide ozonolysis products obtained from linear and cyclic alkenes with hydroxylamine prepared in situ from NH₂OH·HCl by hydrogen chloride neutralization with sodium acetate. A one-pot reactions sequence was performed: alkene oxidation with ozone → reduction to a carbonyl compound with hydroxylamine → condensation of the carbonyl compound with hydroxylamine providing a possibility of direct transformation of alkenes in keto- and aldoximes excluding the stage of preparation and isolation of the carbonyl compound.     

Electrodeposited nano-scale islands of ruthenium oxide as a bifunctional electrocatalyst for simultaneous catalytic oxidation of hydrazine and hydroxylamine

For the first time, an electrodeposited nano-scale islands of ruthenium oxide (ruthenium oxide nanoparticles), as an excellent bifunctional electrocatalyst, was successfully used for hydrazine and hydroxylamine electrocatalytic oxidation. The results show that, at the present bifunctional modified electrode, two different redox couples of ruthenium oxides serve as electrocatalysts for simultaneous electrocatalytic oxidation of hydrazine and hydroxylamine. At the modified electrode surface, the peaks of differential pulse voltammetry (DPV) for hydrazine and hydroxylamine oxidation were clearly separated from each other when they co-exited in solution. Thus, it was possible to simultaneously determine hydrazine and hydroxylamine in the samples at a ruthenium oxide nanoparticles modified glassy carbon electrode (RuON-GCE). Linear calibration curves were obtained for 2.0-268.3 μM and 268.3-417.3 μM of hydrazine and for 4.0-33.8 μM and 33.8-78.3 μM of hydroxylamine at the modified electrode surface using an amperometric method. The amperometric method also exhibited the detection limits of 0.15 μM and 0.45 μM for hydrazine and hydroxylamine respectively. RuON-GCE was satisfactorily used for determination of spiked hydrazine in two water samples. Moreover, the studied bifunctional modified electrode exhibited high sensitivity, good repeatability, wide linear range and long-term stability.     

Microwave-Assisted Methods for Conversion of Aldehydes into Nitriles

A rapid conversion of aldehydes to corresponding nitriles has been achieved under microwave irradiation using hydroxylamine and phthalic anhydride or hydroxylamine and Envirocatalyst EPZG^R in solvent free conditions.     

On-line concentration of trace proteins by pH junctions in capillary electrophoresis with UV absorption detection

Hydroxylamine is a key raw material used in a synthetic drug process at Pharmacia. Since hydroxylamine is harmful to microorganisms, concentrations above 5 ppm could interfere with the biological sewage plant performance. This necessitated the development of a sensitive analytical method for detecting low levels of hydroxylamine in the waste streams generated from the pharmaceutical process. The present report describes a cation-exchange chromatographic method coupled with pulsed amperometric detection at a gold electrode for trace analysis of hydroxylamine. This method was evaluated by generating data on the parameters of specificity, precision, linearity, recovery and sensitivity.     

Complexes of Formaldehyde and α-Dicarbonyls with Hydroxylamine: FTIR Matrix Isolation and Theoretical Study

The interactions of formaldehyde (FA), glyoxal (Gly) and methylglyoxal (MGly) with hydroxylamine (HA) isolated in solid argon and nitrogen were studied using FTIR spectroscopy and ab initio methods. The spectra analysis indicates the formation of two types of hydrogen-bonded complexes between carbonyl and hydroxylamine in the studied matrices. The cyclic planar complexes are stabilized by O–H⋯O(C), and C–H⋯N interactions and the nonplanar complexes are stabilized by O–H⋯O(C) bond. Formaldehyde was found to form with hydroxylamine, the cyclic planar complex and methylglyoxal, the nonplanar one in both argon and nitrogen matrices. In turn, glyoxal forms with hydroxylamine the most stable nonplanar complex in solid argon, whereas in solid nitrogen, both types of the complex are formed.     

氮氧自由基的研究(Ⅺ)——哌啶氮氧自由基与羟胺的单电子转移反应

4位取代哌啶氮氧自由基与羟胺在甲醇中于不同pH条件下发生氧化还原反应,酸性条件下该反应进行较快。通过氮氧自由基与维生素C的反应也可制备还原产物哌啶羟胺。循环伏安法结果表明氮氧自由基可能经历可逆单电子还原反度。     

Electrocatalytic oxidation of hydroxylamine on glassy carbon electrodes modified by hybrid copper-cobalt hexacyanoferrate films.

An electrochemical sensor for amperometric detection of hydroxylamine was developed by electrodeposition of hybrid copper-cobalt hexacyanoferrate films on a glassy carbon electrode. The modified electrode could reduce the overpotential of the hydroxylamine oxidation by about 400 mV. This sensor exhibited a linear relationship between the response current and the hydroxylamine concentration in the range of 1.8 x 10(3) M to 4.6 x 10(-6) M with a detection limit of 2.1 x 10(-7) M. Good agreement was obtained between results from the present method and conventional UV-visible spectrophotometry results. The sensor had good recovery, stability and anti-interference ability.