无催化剂微波促进下C—O,C—N和C—S交叉偶联反应研究

在无金属催化剂的条件下,利用微波加热促进C—O,C—N和C—S交叉偶联反应.实验发现以DMSO为溶剂,t-BuOK为碱,利用微波加热,活化的氯代芳烃能与各类亲核试剂顺利反应,得到中等及优良的产率.     

Palladium-catalyzed amination of aryl nonaflates

The first detailed study of the palladium-catalyzed amination of aryl nonaflates is reported. Use of ligands 2-4 and 6 allows for the catalytic amination of electron-rich and -neutral aryl nonaflates with both primary and secondary amines. With use of Xantphos 5, the catalytic amination of a variety of functionalized aryl nonaflates resulted in excellent yields of anilines; even 2-carboxymethyl aryl nonaflate is effectively coupled with a primary alkylamine. Moderate yields were obtained when coupling halo-aryl nonaflates with a variety of amines, where in most cases the aryl nonaflate reacted in preference to the aryl halide. Overall, aryl nonaflates are an effective alternative to triflates in palladium-catalyzed C-N bond-forming processes due to their increased stability under the reaction conditions.     

Phosphine-Free Tetradentate Salicylaldimine Ligand Complexed with Palladium: First Application in Heck Reactions

Heck reactions were carried out using phosphine-free tetradentate salicylaldimine ligand complexed with PdCl₂ under mild reaction conditions, short reaction time, and low palladium loading. All aryl iodides underwent coupling reactions with olefins, giving corresponding trans-products, with good to excellent yields, whereas aryl bromides gave very poor yields and aryl chlorides failed to react.     

Palladium-catalyzed microwave-assisted amination of 1-bromonaphthalenes and 5- and 8-bromoquinolines

[reaction: see text] 1-Aminonaphthalenes and 5- and 8-aminoquinolines were rapidly prepared from the respective aryl bromides in good yields by Pd-catalyzed aryl amination under microwave conditions. Consistent improvements in yields over those obtained under standard conditions were seen with quinoline substrates. In the cases where 5-bromo-8-cyanoquinoline was used as a substrate, no desired products were obtained under standard conditions with a number of different primary and secondary amines. However, microwave conditions provided the desired products in good to excellent yields.     

Carbene adduct of cyclopalladated ferrocenylimine catalyzed α-arylation of ketones with aryl chlorides or bromides

Carbene adduct of cyclopalladated ferrocenylimine exhibited highly catalytic activity for the α-arylation of ketones with aryl halides. The corresponding products were obtained in moderate to excellent yields. Such protocol was applied to various ketones and a broad scope of aryl halides including aryl chlorides, bromides as well as unactivated and sterically hindered aryl halides.     

Phosphine-free palladium-catalysed direct 5-arylation of imidazole derivatives at low catalyst loading

The regioselective 5-arylation of imidazole derivatives with aryl bromides using a low loading of a phosphine-free palladium catalyst gives a simple and economic access to the corresponding 5-arylimidazoles. The choice of the base and of the solvent was found to be crucial to form these products in high yields. Using KOAc as the base, DMAc as the solvent and only 0.5-0.01 mol % Pd(OAc)₂ as the catalyst, the target products were obtained in moderate to good yields with a wide variety of aryl bromides. Substituents such as fluoro, trifluoromethyl, formyl, acetyl, propionyl, ester or nitrile on the aryl bromide are tolerated. Sterically congested aryl bromides or heteroaryl bromides can also be employed. The nature of the substituents on the imidazole derivative has an important influence on the yields.     

Overman Rearrangement of γ- Aryl Crotyl Alcohols: Effects of Aryl Substituents

Various α,α-methyl aryl allylic amines were synthesized from γ-aryl crotyl alcohols via thermal Overman rearrangement. Noteworthy is that the presence of the electron withdrawing groups at aryl group causes substantial increases in the reaction rates and product yields. The resulting trichloroacetamides were hydrolyzed to the corresponding amines in good yields.     

Palladacycle-Catalyzed Carbonylation of Aryl Iodides or Bromides with Aryl Formates

An efficient palladacycle-catalyzed aromatic carbonylation reaction of aryl formates with aryl iodides or bromides has been developed. Commercially available and easily prepared aryl formates were employed as carbonyl sources without the use of external carbon monoxide. The present catalytic system shows broad functional group tolerance and affords aryl benzoate derivatives in good to excellent yields.     

CuI-catalyzed suzuki-miyaura and sonogashira cross-coupling reactions using DABCO as ligand

In the presence of TBAB, CuI-catalyzed Suzuki-Miyaura cross-coupling of vinyl halides and aryl halides with arylboronic acids was conducted smoothly to afford the corresponding diarylethenes and polyaryls in moderate to good yields using DABCO (1,4-diazabicyclo[2.2.2]octane) as the ligand. We also found that the inexpensive CuI/DABCO catalytic system was effective for Sonogashira cross-couplings of aryl halides and vinyl halides. A variety of aryl halides and vinyl halides including activated aryl chlorides underwent the coupling with terminal alkynes in moderate to excellent yields.     

Dilithium aryl cyanocuprates from butyl aryl tellurides

Butyl aryl tellurides reacted with dilithium dimethyl cyanocuprate and with dilithium methyl(2-thienyl)cyanocuprate to give the corresponding dilithium aryl cyanocuprates, which were captured with enones leading to 4-aryl ketones in good yields.     

环钯化二茂铁亚胺-三苯基膦配合物的合成、表征及催化Suzuki反应研究

为筛选高效催化Suzuki反应的催化剂, 合成了3种新的环钯化二茂铁亚胺-三苯基膦配合物2~4, 经元素分析(或HRMS)、 红外光谱和核磁共振谱对其结构进行了表征, 并通过X射线单晶衍射测定了化合物3的晶体结构. 这些化合物容易合成, 在空气和溶液中稳定, 可用作芳基溴及杂芳基溴与苯基硼酸偶联的Suzuki反应催化剂. 使用摩尔分数为0.01%的催化剂3, 以2倍量的K3PO4为碱, 于110 ℃下, 在甲苯中反应5~15 h, 使具有不同电子和位阻效应的取代芳基溴及杂芳基溴能以较高的产率与苯基硼酸反应生成偶联产物; 与溴苯相比, 带吸电子基的溴苯反应活性较高, 催化剂的摩尔分数降低至0.001%时, 仍能得到较高产率, 而带强给电子基的溴苯如4-溴苯甲醚及带邻位取代基的溴苯在其它条件相同时, 需要延长反应时间才能得到较高的产率.     

Suzuki Coupling of Cyclopropylboronic Acid With Aryl Halides Catalyzed by a Palladium–Tetraphosphine Complex

The tetraphosphine all‐cis‐1,2,3,4‐tetrakis(diphenylphosphinomethyl)cyclopentane (Tedicyp) in combination with [Pd(C₃H₅)Cl]₂ affords a very efficient catalyst for the coupling of cyclopropylboronic acid with aryl bromides and aryl chlorides. Higher reactions rates were observed with aryl bromides than with aryl chlorides; however, even in the presence of 1–0.4% of catalyst, a few aryl chlorides gave the coupling products in good yields. A wide variety of substituents such as alkyl, methoxy, trifluoromethyl, acetyl, benzoyl, formyl, carboxylate, nitro, and nitrile on the aryl halides are tolerated. The coupling reaction of sterically very congested aryl bromides such as bromomesitylene or 2,4,6‐triisopropylbromobenzene also proceeds in good yields.     

Microwave-promoted cross-coupling of acid chlorides with arylboronic acids: a convenient method for preparing aromatic ketones

Simple catalytic systems for cross-coupling reactions of acyl chlorides with arylboronic acids under microwave conditions were tested. Microwave irradiation facilitated the reaction course. Mild reaction conditions afford the symmetrical and unsymmetrical aryl ketones in reasonable to high yields within a short time. A wide range of substrates bearing an electron-donating or an electron-withdrawing substituent on aryl ring of acid chloride as well as on boronic acid were examined and high yields of ketones were produced.     

Palladium-catalyzed carbonylation of aryl triplates. Synthesis of arenecarboxylic acid derivatives from phenols

Various aryl triflates derived from phenols were converted into aryl esters or amides in good yields by a palladium-catalyzed reaction with carbon monoxide and alcohols or amines.     

Facile synthesis of 2-bromo-3-fluorobenzonitrile: an application and study of the halodeboronation of aryl boronic acids

A scaleable synthesis of 2-bromo-3-fluorobenzonitrile via the NaOMe-catalyzed bromodeboronation of 2-cyano-6-fluorophenylboronic acid was developed. The generality of this transformation was demonstrated through the halodeboronation of a series of aryl boronic acids. Both aryl bromides and aryl chlorides were formed in good to excellent yields when the corresponding aryl boronic acid was treated with 1,3-dihalo-5,5-dimethylhydantoin and 5 mol % NaOMe.     

Methenamine as an Efficient Ligand for Copper‐catalyzed Coupling of Phenols with Aryl Halides

Employing methenamine as a new supporting ligand, the copper‐catalyzed coupling reactions of aryl bromides or aryl iodides with various phenols successfully proceeded in good yields under mild conditions. A series of diaryl ethers were obtained with excellent yields in the presence of K₃PO₄ and copper(I) salt.     

P(i-BuNCH2CH2)3N: an efficient promoter for the microwave synthesis of diaryl ethers

With the title proazaphosphatrane as a promoter, the coupling of aryl fluorides with aryl TBDMS ethers under microwave conditions gave moderate to high yields of the desired products at low catalyst loadings and in short times. In this methodology, electron deficient aryl fluorides possessing substituents, such as nitro, cyano, and ester, were coupled with sterically demanding aryl TBDMS ethers as well as with aryl TBDMS ethers bearing a variety of functionalities such as methoxy, halo, and cyano groups.     

One pot Pd(OAc)2-catalysed 2,5-diarylation of imidazoles derivatives

The regioselective 2- or 5-arylation of imidazole derivatives with aryl halides using palladium catalysts has been described in recent years; whereas the arylation at both C2 and C5 carbons of imidazoles in high yields has not been performed. We found conditions allowing the access to these 2,5-diarylimidazoles via a one pot reaction. The choice of the base was found to be crucial to obtain these products in high yields. Using CsOAc as the base, DMA as the solvent and only 2 mol % of the phosphine-free Pd(OAc)₂ the catalyst, the target 2,5-diarylated imidazoles were obtained in moderate to good yields with a wide variety of aryl bromides. Substituents such as fluoro, trifluoromethyl, formyl, acetyl, propionyl, ester, nitro or nitrile on the aryl bromide were tolerated. Sterically congested aryl bromides or heteroaryl bromides can also be employed. Surprisingly the nature of the substituent at position 1 on the imidazole derivative exhibits a huge influence on the reaction.     

Well-defined NHC–Pd(II)–Im (NHC=N-heterocyclic carbene; Im=1-methylimidazole) complex catalyzed C–N coupling of primary amines with aryl chlorides

We report herein a well-defined NHC–Pd(II)–Im (NHC=N-heterocyclic carbene; Im=1-methylimidazole) complex catalyzed C–N coupling of primary amines with aryl chlorides. Under the optimal reaction conditions, a variety of primary amines can be coupled with aryl chlorides to give the amination products in good to high yields within 4 h. It is worthy of noting here that the NHC–Pd(II)–Im complex showed especially high catalytic activity toward challenging sterically hindered substrates including both of aryl amines and aryl chlorides. In addition, alkyl amines were also proved to be suitable reaction partners to give the corresponding amination products in good to high yields.     

Palladaphosphacyclobutenes as catalysts in Heck and Suzuki reactions

Heck reactions of aryl halides with various olefins and Suzuki reactions of aryl halides with phenylboronic acid catalyzed by palladaphosphacyclobutene have been investigated. The scope of the Heck reaction has been investigated in N,N‐dimethylacetamide at 140 °C using NaOAc as base. Using 0.1% molar ratio of palladaphosphacyclobuyenes, aryl bromides were converted into 1,2‐substitutedethene products in good to high yields through coupling with both vinylarenes and acrylates. Actived aryl chloride reacted with styrene to afford 1,2‐substitutedethene products in moderate yields. The scope of the Suzuki reaction has been conducted in toluene at 110 °C using Cs₂CO₃ as base. Using 0.1% molar ratio of palladaphosphacyclobutene, aryl bromides reacted with phenylboronic acid to afford diaryl derivatives in excellent yield. Copyright © 2008 John Wiley & Sons, Ltd.