Influencing factors of venlafaxine degradation at boron-doped diamond anode

Degradation of the antidepressant venlafaxine by an effective electrocatalytic process, boron-doped diamond (BDD) electrode, was study. The BDD electrode was selected as the anode, and the degradation efficiency of venlafaxine under different influencing factors was systematically investigated. The preliminary grasp of the degradation law of venlafaxine by anodic electro-degradation using BDD electrode was obtained. The experimental results showed that the electrochemical oxidation technology using BDD anode can effectively degrade venlafaxine and remove total organic carbon (TOC) from the solution, complete venlafaxine degradation and TOC elimination could be achieved within 30 and 120 min of BDD oxidation process, respectively, and it has good stability and reusability. Increasing the electrolyte concentration (≤0.1 mol/L) and current density (≤100 mA/cm²) within a certain range could accelerate the degradation of venlafaxine. HCO₃^– and PO₄^3? could inhibit the degradation efficiency of venlafaxine through of competing for free radicals. It is interesting that the presence of Cl^? significantly promoted the degradation efficiency of venlafaxine. The results of this study suggest that the Electro-degradation treatment may provide a promising way to treat venlafaxine contaminated water.     

Electrooxidation of ethylenediaminetetraacetic acid at a polycrystalline boron-doped diamond anode

Electrooxidation of ethylenediaminetetraacetic acid at a thin-film boron-doped polycrystalline diamond anode is studied by cyclic voltammetry and amperometry. It is shown that diamond electrodes can be used in the analytical determination of ethylenediaminetetraacetic acid: they have low background current; the detection limit is also rather low.     

Low-frequency electrochemical impedance of benzene oxidation on anode of boron-doped diamond

Kinetics of low-frequency adsorption of benzene oxidation products are studied in 0.5 M K₂SO₄ on an anode of boron-doped diamond. A combination of current polarograms and impedance with analysis of the impedance spectroscopy in the frequency range of 0.05–10 Hz allowed studying in detail the mechanism of adsorption oxidation of benzene under the conditions of competition between this process and the more anodic process of oxygen evolution that is also based on adsorption. A frequency-polarization diagram of dependences of characteristic frequencies (CFs) of adsorption and desorption stages on potential was obtained for the product of benzene oxidation and oxygen-containing intermediate of the oxygen evolution reaction. Controlled stages of coupled processes, potentials, and characteristic frequencies of the points of changes in the reaction mechanism are determined: 0.22 Hz at 2.0 V for benzene oxidation; 0.63 Hz at 2.22 V for oxygen evolution. The potential of maximum adsorption of the organic substance is 2.15 V. The obtained results can be useful in the studies of the mechanism of coupled reactions including organic and inorganic intermediate adsorbates.     

Electroanalytical determination of estriol hormone using a boron-doped diamond electrode

A boron-doped diamond (BDD) electrode was used for the electroanalytical determination of estriol hormone in a pharmaceutical product and a urine sample taken during pregnancy by square-wave voltammetry. The optimized experimental conditions were: (1) a supporting electrolyte solution of NaOH at a pH of 12.0, and (2) a frequency of 20 Hz, a pulse height of 30 mV and a scan increment of 2 mV (for the square-wave parameters). The analytical curve was linear in the concentration range of 2.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹ (r = 0.9994), with a detection limit of 1.7 × 10⁻⁷ mol L⁻¹ and quantification limit of 8.5 × 10⁻⁷ mol L⁻¹. Recoveries of estriol were in the range of 98.6-101.0%, for the pharmaceutical sample, and 100.2-103.4% for the urine sample, indicating no significant matrix interference effects on the analytical results. The accuracy of the electroanalytical methodology proposed was compared to that of the radioimmunoassay method. The values for the relative error between the proposed and standard methods were −7.29% for the determination of estriol in the commercial product and −4.98% in a urine sample taken during pregnancy. The results obtained suggest a reliable and interesting alternative method for electroanalytical determination of estriol in pharmaceutical products and urine samples taken during pregnancy using a boron-doped diamond electrode.     

Electrochemical oxidation of thiocyanates on a boron-doped diamond electrode in acid media

The kinetics and selectivity of the oxidation of thiocyanate on a boron-doped diamond (BDD) electrode in a 0.5 M solution of H₂SO₄ were studied. An analysis of the cyclic voltammetry curves showed that the oxidation of SCN^? was irreversible and occurred with diffusion control in the range of water decomposition potentials. The obtained kinetic dependences can be described by the pseudo-first order equation. The apparent rate constant depends on the current density and initial concentration of the reagent. The main product of oxidation at low current density and high concentration of SCN^? was CN^?.     

Electrochemically modulated liquid chromatography using a boron-doped diamond particle stationary phase

This paper reports on preliminary tests of the performance of boron-doped diamond powder (BDDP) as a stationary phase in electrochemically modulated liquid chromatography (EMLC). EMLC manipulates retention through changes in the potential applied (E(appl)) to a conductive packing. Porous graphitic carbon (PGC) has routinely been utilized as a material in EMLC separations. Herein the utility of BDDP as a stationary phase in EMLC was investigated and its stability, both compositionally and microstructurally, relative to PGC was compared. The results show that BDDP is stable over a wide range of E(appl) values (i.e., -1.2 to +1.2V vs. Ag/AgCl, sat'd NaCl). The data also reveal that electrostatics play a key role in the adsorption of the aromatic sulfonates on the BDDP stationary phase, and that these analytes are more weakly retained in comparison to the PGC support. The potential for this methodology to provide a means to advance the understanding of molecular adsorption and retention mechanisms on carbonaceous materials is briefly discussed.     

Electrochemical detection of sugar-related compounds using boron-doped diamond electrodes

Electrochemical detection of sugar-related compounds was conducted using a boron-doped diamond (BDD) electrode as a detector for flow-injection analysis (FIA). Sugar-related compounds oxidize at high applied potentials, for which the BDD electrode is suitable for electrochemical measurements. Conditions for an FIA system with a BDD detector were optimized, and the following detection limits were achieved for sugar-related compounds: monosaccharides, 25-100 pmol; sugar alcohols, 10 pmol; and oligosaccharides, 10 pmol. The detection limit for monosaccharide D-glucose (Glu) was 105 pmol (S/N = 3). A linear range was acquired from the detection limit to 50 nmol, and the relative standard deviation was 0.65% (20 nmol, n = 6). A high-performance liquid chromatography (HPLC) column was added to the system between the sample injector and the detector and detection limits to the picomole level were achieved, which is the same for the HPLC system and the FIA system. The electrochemical oxidation reaction of Glu was examined using cyclic voltammetry with the BDD detector. The reaction proved to be irreversible, and proceeded according to the following two-step mechanism: (1) application of a high potential (2.00 V vs. Ag/AgCl) to the electrode causes water to electrolyze on the electrode surface with the simultaneous generation of a hydroxyl radical on the surface, and (2) the hydroxyl radical indirectly oxidizes Glu. Thus, Glu can be detected by an increase in the oxidation current caused by reactions with hydroxy radicals.     

Direct electrochemical assay of glucose using boron-doped diamond electrodes

We report linear sweep and square wave voltammetric studies on glucose oxidation at boron-doped diamond (BDD) electrodes in an alkaline medium in efforts to evaluate the techniques for electrochemically assaying glucose. The bare BDD electrode showed good linear responses to glucose oxidation for a concentration range from 0.5 to 10 mM glucose, which well encompasses the physiological range of 3-8 mM. The BDD electrodes did not experience interferences from ascorbic acid or uric acid during glucose detection. This method, when applied to real blood samples, gave results similar to those obtained by a commercial glucose monitor.     

Simultaneous square-wave voltammetric determination of aspartame and cyclamate using a boron-doped diamond electrode

A simple and highly selective electrochemical method was developed for the simultaneous determination of aspartame and cyclamate in dietary products at a boron-doped diamond (BDD) electrode. In square-wave voltammetric (SWV) measurements, the BDD electrode was able to separate the oxidation peak potentials of aspartame and cyclamate present in binary mixtures by about 400 mV. The detection limit for aspartame in the presence of 3.0x10(-4) mol L(-1) cyclamate was 4.7x10(-7) mol L(-1), and the detection limit for cyclamate in the presence of 1.0x10(-4) mol L(-1) aspartame was 4.2x10(-6) mol L(-1). When simultaneously changing the concentration of both aspartame and cyclamate in a 0.5 mol L(-1) sulfuric acid solution, the corresponding detection limits were 3.5x10(-7) and 4.5x10(-6) mol L(-1), respectively. The relative standard deviation (R.S.D.) obtained was 1.3% for the 1.0x10(-4) mol L(-1) aspartame solution (n=5) and 1.1% for the 3.0x10(-3) mol L(-1) cyclamate solution. The proposed method was successfully applied in the determination of aspartame in several dietary products with results similar to those obtained using an HPLC method at 95% confidence level.     

Study of the electrochemical degradation of diclofenac on a boron-doped diamond electrode by UV spectroscopy

Electrochemical degradation of diclofenac in aqueous solutions was studied using a thin-film boron-doped diamond electrode deposited onto a niobium plate. The process was monitored by means of UV spectroscopy and elemental analysis.     

Rechargeable battery using a novel iron oxide nanorods anode and a nickel hydroxide cathode in an aqueous electrolyte

A rechargeable battery using novel α-Fe(2)O(3)/CNFs composite as the anode, β-Ni(OH)(2) as the cathode and LiOH/KOH solution as the electrolyte in an aqueous rechargeable battery has been proposed. The Fe(2)O(3)/Ni(OH)(2) prototype cell exhibits a high average operational voltage of 1.5 V, high rate capability and good cycling performance.     

Simultaneous voltammetric determination of paracetamol and caffeine in pharmaceutical formulations using a boron-doped diamond electrode

A simple and highly selective electrochemical method was developed for the single or simultaneous determination of paracetamol (N-acetyl-p-aminophenol, acetaminophen) and caffeine (3,7-dihydro-1,3,7-trimethyl-1H-purine-2,6-dione) in aqueous media (acetate buffer, pH 4.5) on a boron-doped diamond (BDD) electrode using square wave voltammetry (SWV) or differential pulse voltammetry (DPV). Using DPV with the cathodically pre-treated BDD electrode, a separation of about 550 mV between the peak oxidation potentials of paracetamol and caffeine present in binary mixtures was obtained. The calibration curves for the simultaneous determination of paracetamol and caffeine showed an excellent linear response, ranging from 5.0 × 10⁻⁷ mol L⁻¹ to 8.3 × 10⁻⁵ mol L⁻¹ for both compounds. The detection limits for the simultaneous determination of paracetamol and caffeine were 4.9 × 10⁻⁷ mol L⁻¹ and 3.5 × 10⁻⁸ mol L⁻¹, respectively. The proposed method was successfully applied in the simultaneous determination of paracetamol and caffeine in several pharmaceutical formulations (tablets), with results similar to those obtained using a high-performance liquid chromatography method (at 95% confidence level).     

Electrochemical reduction of CO2 and degradation of KHP on boron-doped diamond electrodes in a simultaneous and enhanced process

A BDD-BDD system was developed in the simultaneous conversion of CO₂ and wastewater purification in one electrochemical cell.     

Electroanalysis of myoglobin and hemoglobin with a boron-doped diamond electrode

The electrochemical behavior of myoglobin (Mb) and hemoglobin (Hb) was investigated with a boron-doped diamond (BDD) electrode by cyclic voltammetry. In acetate buffer solutions, the oxygen reduction at the BDD electrode showed a very high overpotential while the reduction of Mb or Hb was observed in the more positive potential region. Owing to the electrocatalytic reaction of O₂ and the participation of H⁺ following the electrochemical reduction of ferric proteins, the voltammetric responses for Mb and Hb on the BDD electrode in the negative going scans became remarkable in acidic buffer solutions in air. The peak current was linearly proportional to the concentration of Mb in the range 1×10⁻⁶–2×10⁻⁵ M or the concentration of Hb from 1×10⁻⁶ to 1×10⁻⁵ M.     

Electrochemical analysis of chloramphenicol using boron-doped diamond electrode applied to a flow-injection system.

The electrochemical properties of chloramphenicol at a boron-doped diamond thin-film (BDD) electrode were studied using cyclic voltammetry. The highest current response of chloramphenicol was obtained with phosphate buffer, pH 6 (0.1 M) in 1% ethanol. The relationship between the concentration of chloramphenicol and the current response was linear over the range of 0.1-10 mM (R2=0.9990). The amount of chloramphenicol was analyzed by flow-injection analysis. A thin-layer flow cell equipped with a BDD electrode was used as an amperometric detector, and experiments were carried out at -0.7 V (vs. Ag/AgCl). The linear relationship between the current response and the concentration of chloramphenicol in the range of 0.1-50 microM (R2=0.9948) and the limit of detection of 0.03 microM (S/N=3) were obtained. This method has been successfully applied to the determination of chloramphenicol in sterile eye drops and milk sample by the standard addition method. The average recoveries of chloramphenicol in eye drops were 98.0%, and the average recoveries of chloramphenicol from spiked milk were 93.9-103%.     

Interest of micro-reactors for the implementation of advanced electrocatalytic oxidation with boron-doped diamond anode for wastewater treatment

Boron-doped diamond (BDD) anode has attracted great attention in the last two decades for its surpassing performance in the advanced electro-oxidation treatment of wastewater and disinfection. Due to the heterogeneous-like oxidation of organic pollutants, more suitable electrochemical reactor designs have been more recently proposed for optimal degradation and mineralization with BDD anode. Microfluidic reactors have emerged as a promising alternative by implementing submillimetric interelectrode gaps in flow-by or flow-through parallel-plate systems. Micro-reactors allow intensifying the mass transport of species toward the electrode while reducing the energy consumption and avoiding the addition of supporting electrolytes. The principle and main influencing operating parameters have been discussed in this review. Perspectives of the reactive electro-mixing reactor could permit the combination of micro-reactors with macro-reactors by increasing the treatment capacity while limiting the clogging effect. Further researches are required to overcome the drawbacks of micro-reactors and to benefit from electro-precipitation phenomena for the recovery of value-added compounds.     

Distinction between surface hydroxyl and ether groups on boron-doped diamond electrodes using a chemical approach

While it is clearly established that oxidation of as-grown boron-doped diamond (BDD) interfaces results in the introduction of different surface oxygen functions such as ether, carbonyl and hydroxyl groups, there is no reported approach which can clearly distinguish between the different surface functions. For further surface functionalization, it is important to quantify the presence of each group on the diamond surface. In this paper, the presence and amount of surface hydroxyl groups is identified using esterification of the COH groups with trifluoroacetic acid. The presence of CF₃ group in the acid allowed the identification and estimation of the amount of surface hydroxyl groups using X-ray photoelectron spectroscopy (XPS).     

Determination of organophosphate pesticides using an acetylcholinesterase-based biosensor based on a boron-doped diamond electrode modified with gold nanoparticles and carbon spheres

We report on a biosensor for organophosphate pesticides (OPs) by exploiting their inhibitory effect on the activity of acetylcholinesterase (AChE). A boron-doped diamond (BDD) electrode was modified with a nanocomposite prepared from carbon spheres (CSs; with an average diameter of 500 nm) that were synthesized from resorcinol and formaldehyde, and then were coated with gold nanoparticles (AuNPs) by chemically growing them of the CSs. Compared to a bare BDD electrode, the electron transfer resistance is lower on this new electrode. Compared to an electrode without Au-NPs, the peak potential is negatively shifted by 42 mV, and the peak current is increased by 55 %. This is ascribed to the larger surface in the AuNP-CS nanocomposite which improves the adsorption of AChE, enhances its activity, and facilitates electrocatalysis. Under optimum conditions, the inhibitory effect of chlorpyrifos is linearly related to the negative log of its concentration in the 10^?11 to 10^?7 M range, with a detection limit of 1.3?×?10^?13 M. For methyl parathion, the inhibition effect is linear in the 10^?12 to 10^?6 M range, and the detection limit is 4.9?×?10^?13 M. The biosensor exhibits good precision and acceptable operational and temporal stability.