Surfactant-induced Marangoni eddies alter the coffee-rings of evaporating colloidal drops

The influence of the small ionic surfactant sodium dodecyl sulfate (SDS) on the evaporation of drying colloidal droplets is quantitatively investigated. The addition of SDS leads to a significantly more uniform deposition of colloidal particles after evaporation (i.e., the so-called "coffee-ring effect" is dramatically altered). We understand this phenomenon in the context of circulating radial Marangoni flows induced by the variation of SDS concentration along the air-water interface. Video microscopy permits the direct visualization of the colloidal particles involved in these flows, revealing a surprisingly stable "Marangoni eddy" that prevents particle deposition at the drop perimeter.     

Atomic Force Microscopy Characterization and Interpretation of Thin‐Film Poly(butylene adipate) Spherulites with Ring Bands

Atomic force microscopy characterization has been conducted to reveal the morphological difference between single‐ring bands in poly(butylene adipate) (PBA). Furthermore, morphological features of the ring‐less Maltese‐cross spherulites are compared to the ring‐band spherulites. Periodic changes in height seem to be common for either the ring‐band or ring‐less (Maltese‐cross) crystal domains; however, the steepness in height change is greater for the ring‐band crystal, while height change in the ring‐less crystal exhibits a terrace‐like layer pattern. In the ring‐band crystal region, the lamellar stalks, which taper off to pointed needle‐like stalks, monotonously protrude out of the layers of softer materials, with no signs of twisting, bending, or turning. In contrast, all lamellae in the ring‐less (Maltese‐cross) crystal region are uniform platelets arranged like flower petals in a layered pattern.

     

Interactions of Humicola insolens cutinase with an anionic surfactant studied by small-angle neutron scattering and isothermal titration calorimetry

The interaction of cutinase from Humicula insolens (HiC) and sodium dodecyl sulfate (SDS) has been investigated by small-angle neutron scattering (SANS) and isothermal titration calorimetry (ITC). The concerted interpretation of structural and thermodynamic information for identical systems proved valuable in attempts to elucidate the complex modes of protein-detergent interaction. Particularly so at the experimental temperature 22 degrees C, where the formation of SDS micelles is athermal (deltaH = 0), and the effects of protein-detergent interactions stand out clearly in the thermograms. It was found that the effect of SDS on cutinase depended strongly on the sample composition. Thus, addition of SDS corresponding to a molar ratio, n(s) = n(SDS)/n(HiC) of about 10, was associated with the formation of HiC/SDS aggregates, which include more than one protein molecule. The SANS results suggested that on the average such adducts contained two HiC, and the ITC traces showed that they form and break down slowly. At slightly higher SDS concentrations (n(s) = 10-25) these "dimers" dissociated, and the protein denatured. The denaturation showed the characteristic positive enthalpy change, but the SDS denatured state of HiC was unusually compact with a radius of gyration close to that of the native conformation. Further titration with SDS was associated with exothermic binding to the denatured protein until the saturation point at about n(s) = 90. At this point, the free monomer concentration was 2.2 mM and the binding number was approximately 40 SDS/HiC. Interestingly, this degree of SDS binding (approximately 0.5 g of SDS/g of HiC) is less than half the amount bound to typical water-soluble proteins.     

High yield electroblotting onto polyvinylidene difluoride membranes from polyacrylamide gels.

Optimal conditions of electroblotting that led to high protein recovery on polyvinylidene difluoride (PVDF) membranes were determined for sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). SDS concentrations in the gel and transfer buffer were found to be the most important factors affecting the amount of protein recovered on the PVDF membrane. The largest loss occurred during the first 10-30 min of transfer due to the relatively high initial SDS concentration in the gel. During this initial stage of transfer, most of the protein passed through the primary membrane and was partially retained on secondary and tertiary membranes. The value of presoaking gels prior to transfer to reduce the amount of SDS was evaluated by quantitating free SDS densitometrically and by correlating the reduced SDS concentration with increased electroblotting efficiency from presoaked gels. Transfer time was evaluated and no "overtransfer" was found even after very long transfer times. These results clearly indicate that proteins electroblotted onto PVDF membranes were tightly bound and could not be released by extending the transfer time. The effects of methanol and SDS concentrations on protein adsorption from solution to PVDF were also determined quantitatively. The results of this study strongly suggest that proteins fully saturated with SDS cannot bind efficiently to PVDF membranes. Since SDS is necessary for high protein mobility, the challenge in efficient electroblotting is to maintain an optimal SDS concentration which is high enough to permit effective removal from the gel and low enough to permit effective binding to the PVDF membrane. For 1.5 mm thick gels containing 0.2% SDS, presoaking the gel for 15-20 min in transfer buffer with 10% methanol prior to electroblotting provided the best recovery on the primary membrane.     

Coarse-grained molecular dynamics simulation of self-assembly of polyacrylamide and sodium dodecylsulfate in aqueous solution

Coarse-grained molecular dynamics simulations have been performed to study the self-assembly of polymer, polyacrylamide (PAM) and surfactant, sodium dodecylsulfate (SDS) in aqueous solution. Our simulations revealed that PAM curled into clusters in the absence of SDS, while it was stretched if SDS was added. For the SDS-PAM complexes, the aggregate formation process can be divided into three stages: firstly, PAM quickly absorbs some SDS monomers until the radius of gyration (Rg) of polymer reaches a minimum; then, PAM stretches and the Rg of PAM increases due to more and more adsorbed SDS; ultimately, the commonly accepted "necklace" structure is formed with PAM located at the interface of the hydrophobic and hydrophilic regions of the SDS micelle. The main driving force for the association was hydrophobic interactions between the polymer backbone and the surfactant hydrophobic tails. As the concentration of SDS increased, the Rg of PAM increased up to a maximum, indicating the polymer was saturated with surfactant.     

Influence of sodium dodecyl sulfate on the phase transition of thermoresponsive hyperbranched polymer in water

The influence of sodium dodecyl sulfate(SDS) on the cloud point temperature(Tcp) of the aqueous solution of thermoresponsive hyperbranched polyethylenimine derivative HPEI-IBAm was studied systematically. When p H was below 8.5, HPEI-IBAm was positively-charged. Initially, the Tcp of HPEI-IBAm decreased significantly, followed by an obvious increase with the increase of SDS concentration. The lower the p H was, the higher the SDS concentration was required to achieve the minimum Tcp. When p H was above 8.5, HPEI-IBAm was neutral and raising the SDS concentration led to the gradual increase of Tcp. Compared to linear poly(N-isopropyl acrylamide)(PNIPAm), the Tcp of the current hyperbranched HPEI-IBAm was more sensitive to SDS. The thermoresponsive HPEI-IBAm/SDS complex was used as host to accommodate the non-polar pyrene in water. The lowest SDS concentration for effectively enhancing the solubility of pyrene in water was around 6.4 mmol·L~(-1). When HPEI-IBAm was present, the SDS concentration threshhold was decreased to about 0.31 mmol·L~(-1). Fluorescence technique with pyrene as the hydrophobic probe demonstrated that the SDS concentration of 7.2 mmol·L~(-1) was required to form the hydrophobic domain to accommodate pyrene guests without HPEI-IBAm, while only 0.2 mmol·L~(-1) of SDS was required in the presence of HPEI-IBAm.     

Micellar effect on hydrolysis of 4-methyl-2-nitroaniline phosphate

The effect of anionic surfactant sodium dodecyl sulfate (SDS) on the hydrolysis of a substrate (mono-4-methyl-2-nitroaniline phosphate) by HCl was studied at 303 K. The reaction followed the first-order kinetics with respect to both HCl and the substrate. SDS effectively catalyzes this reaction, which rate increases with the concentration of SDS due to an increase of dielectric constant of the medium. The kinetic data were fitted to Menger-Portnoy, Piszkiewicz and Berezin kinetic models to explain the observed micellar effects. The various activation parameters both in the presence and absence of SDS were evaluated; a reasonable mechanism was proposed. The rate constant in micellar phase, binding constant and index of cooperativity were calculated accordingly.     

Thermodynamic characteristics of the dissolution of glycine,glycylglycine, and glycylglycylglycine in aqueous solutions of sodium dodecyl sulfate at <Emphasis Type="Italic">Т</Emphasis> = 298.15 K

the enthalpies of dissolution of glycine (Gly), glycylglycine (GlyGly), and glycylglycylglycine (GlyGlyGly) are measured in aqueous solutions of sodium dodecyl sulfate (SDS) at SDS concentrations m = 0–0.7 mol kg^?1 and Т = 298.15 K by means of calorimetry. The obtained data are used to calculate the standard values of enthalpies of dissolution (Δ_sol H ^m ) and enthalpies of transfer (Δ_tr H ^m ) of glycine and its oligomers from water to SDS aqueous solutions. The dependences of Δ_sol H ^m and Δ_tr H ^m on SDS concentration in an aqueous solution at a constant concentration of glycine and its oligomers are determined. A comparative analysis of the thermodynamic characteristics of Gly, GlyGly, and GlyGlyGly transfer within the studied range of SDS concentrations is performed. The results are interpreted in terms of ion–ion, ion–polar, and hydrophobic interactions between SDS and molecules of glycine and its oligomers.     

Nonequilibrium features of the association between poly(vinylamine) and sodium dodecyl sulfate: the validity of the colloid dispersion concept

The effect of different mixing protocols on the bulk and surface properties of the aqueous mixtures of linear poly(vinylamine) (PVAm) and sodium dodecyl sulfate (SDS) has been investigated using pH, electrophoretic mobility, dynamic light scattering, coagulation kinetics, and surface tension measurements. For the preparation of the solutions, two kinds of mixing protocols were applied. The so-called "stop flow mixing" enables a very rapid mixing whereas in the case of "gentle mixing" the mixing of the components is less efficient. At high surfactant concentrations a kinetically stable colloid dispersion of the PVAm/SDS particles is formed via the application of the stop flow mixing method. The mixing protocols have a significant effect on the bulk properties of the PVAm/SDS system, in particular, at the low pH range and at large PVAm concentrations. The effect of mixing can be qualitatively understood in terms of the enhanced local rate of coagulation of the PVAm/SDS complexes as well as of the appearance of polyelectrolyte/surfactant aggregates via the application of a less efficient mixing. The study also reveals that the applied methods of solution preparation do not have a major impact on the bound amount of the surfactant as well as on the surface tension isotherms of the system. This latter finding is attributed to the hindered adsorption of the large polyelectrolyte/surfactant aggregates at the air/water interface.     

Effects of surfactant and temperature on rheological and structural properties of semidilute aqueous solutions of unmodified and hydrophobically modified alginate

The dynamic and structural perturbations that result from the interactions between the anionic surfactant sodium dodecyl sulfate (SDS) and the hydrophobically modified biopolymer alginate (HM-alginate) have been studied with the aid of rheological methods, turbidimetry, and small-angle neutron scattering (SANS). The rheological results for a semidilute HM-alginate solution in the presence of SDS disclose strong interactions between HM-alginate and SDS at a low level of surfactant addition, and this feature is accompanied by enhanced turbidity. At higher surfactant concentrations the association complexes are disrupted. A strong temperature effect of the viscosity is observed in HM-alginate solutions at moderate SDS concentrations, where an elevated temperature leads to enhanced chain mobility, which promotes a breakup of the association complexes. The SANS results reveal a pronounced peak in the plot of scattered intensity versus wavevector q at intermediate q values for SDS concentrations above the critical micelle concentration (cmc). With contrast-matching conditions, using deuterated SDS instead of SDS, no interaction peak appears but an "upturn" in the scattered intensity is observed at small q value. The magnitude of this effect decreases with increasing surfactant concentration, showing clearly that SDS is capable of breaking up the large aggregates created.     

A needle-and-thread approach to bilayer transport: permeation of a molecular umbrella-oligonucleotide conjugate across a phospholipid membrane

A di-walled molecular umbrella, composed of two choloyl groups, one spermidine moiety, and a 5-thiol(2-nitrobenzoyl) "handle", was covalently attached to a 16-mer oligonucleotide (S-dT16) through a disulfide bond. Incubation of this conjugate (1) with vesicles made from 1-palmitoyl-2-oleyol-sn-glycero-3-phosphocholine and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (95/5, mol/mol) (200 nm diameter, extrusion) that contained entrapped glutathione (GSH) at 37 degrees C resulted in the liberation of the oligonucleotide and the umbrella-bound 5-mercapto(2-nitrobenzoyl) moiety (USH) via thiolate-disulfide interchange. The appearance of USH, together with the absence of leakage of entrapped GSH and a vesicular capture of the oligonucleotide that matches the extent of USH formation, provides compelling evidence for delivery of S-dT16 into the aqueous compartment of these vesicles. In a sense, the molecular umbrella functions like a "needle" in providing a pathway for the oligonucleotide (the "thread") to cross the membrane.     

A novel photosensitive ternary complex consisting of phenol‐formaldehyde resin,sodium dodecyl sulfate,and diazo resin

A novel photosensitive ternary complex formed from phenol‐formaldehyde resin (PR), sodium dodecyl sulfate (SDS), and diazo resin (DR) was developed. In the presence of SDS, PR remains soluble in water when its solution is neutralized. The PR‐SDS‐DR ternary complex forms when DR is added to the PR‐SDS solution. The ternary complex dissolves in polar solvents such as dimethylformamide and is sensitive toward UV light or heating. It was confirmed that the ionic bond of  SO +N₂ between SDS and DR converts to a covalent bond after the decomposition of the ⁺N₂ group under UV irradiation or heating. As a result, the solubility of PR‐SDS‐DR changes dramatically; that is, after treatment with UV light or heating, PR‐SDS‐DR becomes insoluble in polar solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2566–2571, 2000     

Conformational study of papain in the presence of sodium dodecyl sulfate in aqueous medium

The interactions between a globular protein, papain and the anionic surfactant, sodium dodecyl sulfate (SDS) have been investigated in aqueous medium using fluorimetric, circular dichroism, Fourier transform infra-red, UV-vis spectrophotometric, dynamic light scattering, and nuclear magnetic resonance techniques. The conformational change of papain in aqueous solution has been studied in the presence of SDS. The results show the high alpha-helical content and unfolded structure of papain in the presence of SDS due to strong electrostatic repulsion leading to a "necklace and bead model" in protein-surfactant complexes.     

Spectrofluorimetric Study of Cyclodextrin Complexation in the Presence of Third and Fourth Components

The steady-state fluorescence profile of 4,5-benzopiaselenol (Se-DAN) has been investigatedin mixed aqueous media comprising cyclodextrins (CDs) andsodium dodecyl sulfate (SDS).The emission intensity of Se-DAN, whereas virtually unaffected in the CD/SDS medium, wasenhanced synergistically by CD and SDS and was accompanied by a marked blue shift of themaximum emission wavelength. The interactions involving CD were rather interesting. While amixed solution of CD and SDS brought about a slight fluorescence increase of Se-DAN, additionof toluene, a fourth component, resulted in a pronounced emission enhancement. To ascertain therole of toluene in the system, a model study was carried out by use of pyrene (Py) as a fluorescenceprobe in place of Se-DAN/SDS. A 1:1:1CD/Py/toluene ternary complexwas detected and itsassociation constant was determined to be 869 M-1, significantly greater than the previously reportedvalues of the CD/Py binary complex. On the basis of the mechanisticstudy, the formation of aCD/Se-DAN/SDS/toluene quaternary complex is proposed.     

The acceleration of decomposition of potassium persulfate in the presence of sodium dodecyl sulfate and polymer particles as a model of emulsion polymerization system

The decomposition rates of potassium persulfate (KPS) in aqueous solutions containing sodium dodecyl sulfate (SDS) in the presence of polystyrene or poly(methyl methacrylate) particles as models of emulsion polymerization systems were measured by isotachophoresis. Free SDS molecules dispersed in the monomolecular state had an ability to accelerate the KPS decomposition, but SDS molecules adsorbed onto the polymer particles did not accelerate it.Part CXX of the series of Studies on Suspension and Emulsion     

Electrochemical immunosensor for prostate-specific antigen using a glassy carbon electrode modified with a nanocomposite containing gold nanoparticles supported with starch-functionalized multi-walled carbon nanotubes

We report on a simple, rapid, and efficient method for the extraction of volatile organic compounds (VOCs; including methanol, tetrahydrofuran, 2-hexanone and benzene) from air and solid samples. The system is based on the use of a laboratory-made syringe as the extractor. The needle of the syringe is placed in a chamber cooled by liquid nitrogen. The tip of the needle is placed in the headspace of a vial containing the sample. The headspace components then are circulated with a pump to pass the needle, and this results in freeze-trapping of the VOCs on the inner surface of the needle. The circulation of the headspace components is continued for 15 min, and the syringe is then removed and placed in a GC injector. The effects of volume of the sample vial, headspace flow rate, temperature and time of extraction and desorption were optimized. The overall time for sampling and analysis is <30 min. The method displays an extraction efficiency of >80%) and a good sample transfer efficiency into the GC column due to the absence of a sorbent inside the needle. No carry-over was observed after 30?s desorption at 260?°C. An external standard method was used for quantitative analysis. The relative standard deviation values are below 10% and the limits of detection range from 1.3 to 4.6?ng?g^?1.

Effects of anionic surfactant SDS on the photophysical properties of two fluorescent molecular sensors

Two fluorescent molecular sensors CS1 and CS2 were designed and synthesized to probe the aggregate behavior of anionic surfactant SDS. CS1 was based on the photo-induced electron transfer (PET) mechanism, while CS2 was founded on the intramolecular charge transfer (ICT) mechanism. The photophysical properties of CS1–2 in anionic surfactant sodium dodecyl sulfate (SDS) solution were studied by fluorescence and UV–vis methods. The experimental results show that significant absorption and emission spectral responses of CS1 were observed with the addition of SDS: the absorbance and fluorescence intensity decreased first and then increased. The plot of fluorescence intensity of CS1 versus SDS concentration showed two break points, which might be ascribed to the critical micellar concentration (cmc) and the formation of premicelle (cac) aggregate, respectively. But the solution’s color of CS2 changed from yellow to red with increasing SDS concentrations. The large red-shift in both absorption (50 nm) and emission (55 nm) spectra of CS2 was resulted from the protonation of the electron accepting moiety (NC nitrogen), which enhanced the “push–pull” interaction of the ICT fluorophore. This was facilitated by the increase of local H⁺ concentration around SDS premicelle and micelle. As a consequence, pK_a values of CS1 and CS2 were elevated in SDS micelle.     

Disjoining pressure and stratification in asymmetric thin-liquid films

We directly measure, for the first time, disjoining pressure isotherms for asymmetric oil/aqueous surfactant/gas (i.e., pseudoemulsion) films using a modified version of the porous-plate technique first developed by Mysels in conjunction with thin-film interferometry. Dynamic film-thinning experiments are also performed on individual foam and pseudoemulsion films. At SDS surfactant concentrations above the critical micelle concentration (CMC) (0.1 M SDS), the pesudoemulsion films exhibit the same step-wise layer thinning observed in foam films under similar conditions. Further, we conduct dynamic thinning experiments on solid/liquid/gas systems and show that aqueous 0.2 M CTAB films sandwiched between glass and air also display discrete thinning transitions. All of these stratification transitions arise from oscillations in the disjoining pressure isotherm, generated by amphiphilic structuring within the film.For 0.1 M SDS dedecane/air pesudoemuslion films, the slope and peak height of the disjoining-pressure oscillations increase with each subsequent amphiphilic layer as film thickness decreases. Magnitudes of the structural forces are low (<100 Pa) but the length scale of the oscillations is large (10 nm) and rathe far reaching (50 nm). Moreover, for 0.1 M SDS solutions, the capillary pressures associated with film rupture are significantly lower for pseudoemulsion films (0.1 kPa) when compared to foam films (15 kPa) at equivalent conditions. Taken together, our dynamic thinning and equilibrium disjoining pressure measurements indicate that stratification in 0.1 M SDS films has little effect on both kinetic and thermodynamic films stability.     

Voltammetric behavior of ethopropazine and the influence of sodium dodecylsulfate on its accumulation on gold electrodes

Surfactants are sometimes used to improve the accumulation of some electroactive organic compounds, but anionic surfactants have seldom been utilized for such a purpose yet. In this paper, the influence of the anionic surfactant sodium dodecylsulfate (SDS) on the accumulation of ethopropazine (EPZ) at a polycrystalline gold electrode has been studied. EPZ exhibits an anodic peak at about 0.67 V (vs. SCE) and a shoulder in pH 3.5 citric acid–biphthalate buffer solution. In the absence of SDS, the peak is small and ill defined, but it becomes high and well shaped when SDS is added. This results from the adsorption of EPZ in the SDS membrane, which forms spontaneously on the gold electrode surface. For both cases EPZ shows the same electrode reaction mechanism, which is similar to that of promethazine (PMZ). The influence of other factors, such as pH value, variety and concentration of buffers, other surfactants, accumulation potential and time etc has been discussed. It was found that only the anionic surfactants had an enhancement effect on the EPZ accumulation. Also, the solution should be acidic or neutral so as to maintain the interaction due to its electrostatic nature. The optimum SDS concentration for EPZ accumulation is about 0.1 mM regardless of whether or not an accumulation potential is adopted. When all the experiment conditions are optimized, the peak current of the anodic peak changes linearly with the concentration of EPZ over the range 0.4–4 M, and is thus of analytical significance.     

Kinetics and Mechanism Studies on Dispersion of CNT in SDS Aqueous Solutions

The objects of this research are to study the dispersion of CNT (carbon nanotube) in SDS (sodium dodecyl sulfate) aqueous solutions with kinetics approach and to obtain some information about mechanism for this dispersion. Firstly, I measured the UV‐visible absorption at 260 nm of CNT in SDS aqueous solutions after different time of dispersion for different concentrations of CNT and SDS. Then, curves of the time‐dependent absorbance were analyzed by various mathematical models and were found to fit well with equation of A = A∞ exp(‐k_obs t), where A∞ is the absorbance at infinite time and k_obs is the observed rate constant. The values of A∞, k_obs, and, minimum time for dispersion can be obtained. From the effects of concentrations of SDS and CNT on A∞ and k_obs, the dissociation constant for CNT‐SDS complex and the optimum ratio of [CNT]/[SDS] can be estimated. Finally, the mechanism for this dispersion may be proposed as” where b‐CNT, CNT, CNT‐SDS, and, k_i s are bounded CNT, exfoliated CNT, CNT‐SDS complex, and, the rate constants, respectively. In this mechanism, b‐CNT is firstly unbounded by supersonic energy to form CNT intermediate with rate constant of k₁, which is proportional to the supersonic energy per time. The CNT intermediate then recombines to form b‐CNT with rate constant k_?1[CNT] or reacts with SDS to form CNT‐SDS complex, which has absorbance at 260 nm in UV‐visible spectrum, with rate constant of k₂ [SDS]. Details of kinetics and mechanism will be discussed in this paper.