Ultrasmall iron oxide nanoparticles for biomedical applications: improving the colloidal and magnetic properties

A considerable increase in the saturation magnetization, M(s) (40%), and initial susceptibility of ultrasmall (<5 nm) iron oxide nanoparticles prepared by laser pyrolysis was obtained through an optimized acid treatment. Moreover, a significant enhancement in the colloidal properties, such as smaller aggregate sizes in aqueous media and increased surface charge densities, was found after this chemical protocol. The results are consistent with a reduction in nanoparticle surface disorder induced by a dissolution-recrystallization mechanism.     

Nanocrystalline iron oxide aerogels as mesoporous magnetic architectures

We have developed crystalline nanoarchitectures of iron oxide that exhibit superparamagnetic behavior while still retaining the desirable bicontinuous pore-solid networks and monolithic nature of an aerogel. Iron oxide aerogels are initially produced in an X-ray-amorphous, high-surface-area form, by adapting recently established sol-gel methods using Fe(III) salts and epoxide-based proton scavengers. Controlled temperature/atmosphere treatments convert the as-prepared iron oxide aerogels into nanocrystalline forms with the inverse spinel structure. As a function of the bathing gas, treatment temperature, and treatment history, these nanocrystalline forms can be reversibly tuned to predominantly exhibit either Fe(3)O(4) (magnetite) or gamma-Fe(2)O(3) (maghemite) phases, as verified by electron microscopy, X-ray and electron diffraction, microprobe Raman spectroscopy, and magnetic analysis. Peak deconvolution of the Raman-active Fe-O bands yields valuable information on the local structure and vacancy content of the various aerogel forms, and facilitates the differentiation of Fe(3)O(4) and gamma-Fe(2)O(3) components, which are difficult to assign using only diffraction methods. These nanocrystalline, magnetic forms retain the inherent characteristics of aerogels, including high surface area (>140 m(2) g(-1)), through-connected porosity concentrated in the mesopore size range (2-50 nm), and nanoscale particle sizes (7-18 nm). On the basis of this synthetic and processing protocol, we produce multifunctional nanostructured materials with effective control of the pore-solid architecture, the nanocrystalline phase, and subsequent magnetic properties.     

Water-dispersible sugar-coated iron oxide nanoparticles. An evaluation of their relaxometric and magnetic hyperthermia properties

Synthesis of functionalized magnetic nanoparticles (NPs) for biomedical applications represents a current challenge. In this paper we present the synthesis and characterization of water-dispersible sugar-coated iron oxide NPs specifically designed as magnetic fluid hyperthermia heat mediators and negative contrast agents for magnetic resonance imaging. In particular, the influence of the inorganic core size was investigated. To this end, iron oxide NPs with average size in the range of 4-35 nm were prepared by thermal decomposition of molecular precursors and then coated with organic ligands bearing a phosphonate group on one side and rhamnose, mannose, or ribose moieties on the other side. In this way a strong anchorage of the organic ligand on the inorganic surface was simply realized by ligand exchange, due to covalent bonding between the Fe(3+) atom and the phosphonate group. These synthesized nanoobjects can be fully dispersed in water forming colloids that are stable over very long periods. Mannose, ribose, and rhamnose were chosen to test the versatility of the method and also because these carbohydrates, in particular rhamnose, which is a substrate of skin lectin, confer targeting properties to the nanosystems. The magnetic, hyperthermal, and relaxometric properties of all the synthesized samples were investigated. Iron oxide NPs of ca. 16-18 nm were found to represent an efficient bifunctional targeting system for theranostic applications, as they have very good transverse relaxivity (three times larger than the best currently available commercial products) and large heat release upon application of radio frequency (RF) electromagnetic radiation with amplitude and frequency close to the human tolerance limit. The results have been rationalized on the basis of the magnetic properties of the investigated samples.     

The electrokinetic properties of colloidal magnetic iron oxides

A novel electrokinetic streaming potential technique has been used to determine the ζ potential behavior of three magnetic iron oxides, (Fe(3)O(4), γ-Fe(2)O(3), and CoFe(2)O(4)) as a function of pH and salt concentration. These colloidal materials, (nanosize in one dimension), are held in the form of a plug by means of external magnets. The streaming potential (E) is measured as a function of fluid flow induced by a pressure drop (ΔP) across the plug. The magnetically held plug is found to obey the requirements of the streaming potential technique; in each case an iso-electric point, (iep) independent of salt concentration is observed. However, if one uses the appropriate quantities in the standard formula, the calculated ζ potentials are very much lower than for oxides such as silica, alumina or goethite and other colloidal oxide, latex, etc. particulates in aqueous salt solutions. Furthermore, at a given pH, the measured ζ potentials anomalously increase in magnitude rather than decrease as observed conventionally as the salt concentration is increased. This apparent anomalous behavior could not be eliminated by incorporating surface conductance effects. However by including a conductance pathway, independent of pH or salt concentration, through the magnetic particle network itself, the anomaly was removed. Confirmation of the role of a conductance pathway through the magnetic particle network was obtained by using silica coated magnetic particles which displayed normal electrokinetic behavior. Finally, we have redesigned the plug-electrode assembly to allow measurement of streaming current, a technique know to eliminate contributions from plug network conductances of any kind. The resulting ζ potentials, derived from this streaming current technique are normal.     

Polysaccharide-modified iron oxide nanoparticles as an effective magnetic affinity adsorbent for bovine serum albumin

The magnetic separation technique based on magnetic iron oxide nanoparticles (MNPs) has potential applications in protein adsorption and purification, enzyme immobilization, cell sorting, nucleic acid detachment, and drug release. However, the naked MNPs are often insufficient for their hydrophilicity, colloidal stability, and further functionalization. To overcome these limitations, chitosan was firstly carboxymethylated and then covalently conjugated on the surface of the MNPs ranging in size from about 5 to 15 nm, which were prepared by co-precipitating iron (II) and iron (III) in alkaline solution and then treating under hydrothermal conditions. It was found that such modification did not result in the phase change of the MNPs, and the resultant modified nanoparticles were still superparamagnetic. In particular, the colloidal stability of MNPs in aqueous suspension was improved after the surface modification. By investigating the adsorption of bovine serum albumin (BSA) on the modified MNPs, it was observed that the adsorption capacity of the BSA on the modified MNPs increased rapidly within several minutes and then reached the maximum value at about 10 min. The adsorption equilibrium isotherm could be fitted well by the Langmuir model. The medium pH affected greatly the adsorption of the BSA. The maximum adsorption of the BSA occurred at the pH value close to the isoelectric point of the BSA, with a saturation adsorption amount of 94.45 mg/g (25 °C). For the BSA feed concentration of 1.017 mg/ml, a high desorption percentage of 91.5% could be achieved under an alkaline condition (pH 9.4).     

Gas-bubble effects on the formation of colloidal iron oxide nanocrystals

This paper reports that gas bubbles can be used to tailor the kinetics of the nucleation and growth of inorganic-nanocrystals in a colloidal synthesis. We conducted a mechanistic study of the synthesis of colloidal iron oxide nanocrystals using gas bubbles generated by boiling solvents or artificial Ar bubbling. We identified that bubbling effects take place through absorbing local latent heat released from the exothermic reactions involved in the nucleation and growth of iron oxide nanocrystals. Our results show that gas bubbles display a stronger effect on the nucleation of iron oxide nanocrystals than on their growth. These results indicate that the nucleation and growth of iron oxide nanocrystals may rely on different types of chemical reactions between the iron-oleate decomposition products: the nucleation relies on the strongly exothermic, multiple-bond formation reactions, whereas the growth of iron oxide nanocrystals may primarily depend upon single-bond formation reactions. The identification of exothermic reactions is further consistent with our results in the synthesis of iron oxide nanocrystals with boiling solvents at reaction temperatures ranging from 290 to 365 °C, by which we determined the reaction enthalpy in the nucleation of iron oxide nanocrystals to be -142 ± 12 kJ/mol. Moreover, our results suggest that a prerequisite for effectively suppressing secondary nucleation in a colloidal synthesis is that the primary nucleation must produce a critical amount of nuclei, and this finding is important for a priori design of colloidal synthesis of monodispersed nanocrystals in general.     

Magnetic fluid hyperthermia: focus on superparamagnetic iron oxide nanoparticles

Due to their unique magnetic properties, excellent biocompatibility as well as multi-purpose biomedical potential (e.g., applications in cancer therapy and general drug delivery), superparamagnetic iron oxide nanoparticles (SPIONs) are attracting increasing attention in both pharmaceutical and industrial communities. The precise control of the physiochemical properties of these magnetic systems is crucial for hyperthermia applications, as the induced heat is highly dependent on these properties. In this review, the limitations and recent advances in the development of superparamagnetic iron oxide nanoparticles for hyperthermia are presented.     

Controlled assembly of superparamagnetic iron oxide nanoparticles on electrospun PU nanofibrous membrane: A novel heat-generating substrate for magnetic hyperthermia application

A facile method of fabricating novel heat-generating membranes composed of electrospun polyurethane (PU) nanofibers decorated with superparamagnetic iron oxide nanoparticles (NPs) is reported. Electrospinning was used to produce polymeric nanofibrous matrix, whereas polyol immersion technique allowed in situ assembly of well-dispersed Fe₃O₄ NPs on the nanofibrous membranes without any surfactant, and without sensitizing and stabilizing reagent. The assembly phenomena can be explained by the hydrogen-bonding interactions between the amide groups in the PU matrix and the hydroxyl groups capped on the surface of the Fe₃O₄ NPs. The prepared nanocomposite fibers showed acceptable magnetization value of 33.12 emu/g, after measuring the magnetic hysteresis loops using SQUID. Moreover, the inductive heating property of electrospun magnetic nanofibrous membranes under an alternating current (AC) magnetic field was investigated. We observed a progressive increase in the heating rate with the increase in the amount of magnetic Fe₃O₄ NPs in/on the membranes. The present electrospun magnetic nanofibrous membrane may be a potential candidate as a novel heat-generating substrate for localized hyperthermia cancer therapy.     

Efficient removal of iodine and chromium as anionic species from radioactive liquid waste using prepared iron oxide nanofibers

Journal of Radioanalytical and Nuclear Chemistry - Three synthetic hematite (SH) materials as iron oxides nanofibers were prepared and applied for the removal of 51Cr and radioiodine (131I) as...     

From colloidal Co/CoO core/shell nanoparticles to arrays of metallic nanomagnets: surface modification and magnetic properties.

The magnetic properties of nanoparticles can be subject to strong variations as the chemical composition of the particle surface is modified. To study this interrelation of surface chemistry and magnetism, self-assembled layers of colloidal 9.5 nm Co/CoO core/shell nanoparticles were exposed to mild reactive hydrogen and oxygen plasmas. The consecutive oxygen/hydrogen plasma treatment transforms the particle layer into an array of metallic nanomagnets with complete reduction of the oxide and removal of the organic surfactants. The original arrangement of the particle array and the number of Co atoms per particle remains unchanged within the experimental error, and thus this is a possible route for the fabrication of ultrahigh-density magnetic bit structures from colloidal dispersions. The magnetic properties can be tuned by controlling the thickness of the surface oxide layer, which magnetically hardens the particles, as evidenced by element-specific magnetic hysteresis loops.     

Antibiofouling polymer-coated superparamagnetic iron oxide nanoparticles as potential magnetic resonance contrast agents for in vivo cancer imaging

We report the fabrication and characterization of antifouling polymer-coated magnetic nanoparticles as nanoprobes for magnetic resonance (MR) contrast agents. Magnetite superparamagnetic iron oxide nanoparticles (SPION) were coated with the protein- or cell-resistant polymer, poly(TMSMA-r-PEGMA), to generate stable, protein-resistant MR probes. Coated magnetic nanoparticles synthesized using two different preparation methods (in situ and stepwise, respectively) were both well dispersed in PBS buffer at a variety of pH conditions (pH 1-10). In addition, dynamic light scattering data revealed that their sizes were not altered even after 24 h of incubation in 10% serum containing cell culture medium, indicative of a lack of protein adsorption on their surfaces. When the antibiofouling polymer-coated SPION were incubated with macrophage cells, uptake was significantly lower in comparison to that of the popular contrast agent, Feridex I.V., suggesting that the polymer-coated SPION can be long-circulated in plasma by escaping from uptake by the reticular endothelial system (RES) such as macrophages. Indeed, when the coated SPION were administered to tumor xenograft mice by intravenous injection, the tumor could be detected in T2-weighted MR images within 1 h as a result of the accumulation of the nanomagnets within the tumor site. Although the poly(TMSMA-r-PEGMA)-coated SPION do not have any targeting ligands on their surface, they are potentially useful for cancer diagnosis in vivo.     

A controlled approach to iron oxide nanoparticles functionalization for magnetic polymer brushes

In this article, we report a detailed study of surface modification of magnetite nanoparticles by means of three different grafting agents, functional for the preparation of magnetic polymer brushes. 3-Aminopropyltriethoxysilane (APTES), 3-chloropropyltriethoxysilane (CPTES), and 2-(4-chlorosulfonylphenyl)ethyltrichlorosilane (CTCS) were chosen as grafting models through which a wide range of polymer brushes can be obtained. By means of accurate thermogravimetric analysis a good control over the amount of immobilized molecules is achieved, and optimal operating conditions for each grafting agent are consequently determined. Graft densities ranging from approximately 4 to 7 molecules per nm(2) are obtained, depending on the conditions used. In addition, the surface-initiated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) carried out with CTCS-coated nanoparticles is presented as an example of polymer brushes, leading to a well-defined and dense polymeric coating of around 0.6 PMMA chains per nm(2).     

Selective fluorescence response and magnetic separation probe for 2,4,6-trinitrotoluene based on iron oxide magnetic nanoparticles

Despite the rapid development of nanomaterials and nanotechnology, it is still desirable to develop novel nanoparticle-based techniques which are cost-effective, timesaving, and environment-friendly, and with ease of operation and procedural simplicity, for assay of target analytes. In the work discussed in this paper, the dye fluorescein isothiocyanate (FITC) was conjugated to 1,6-hexanediamine (HDA)-capped iron oxide magnetic nanoparticles (FITC–HDA Fe₃O₄ MNPs), and the product was characterized. HDA ligands on the surface of Fe₃O₄ MNPs can bind 2,4,6-trinitrotoluene (TNT) to form TNT anions by acid–base pairing interaction. Formation of TNT anions, and captured TNT substantially affect the emission of FITC on the surface of the Fe₃O₄ MNPs, resulting in quenching of the fluorescence at 519 nm. A novel FITC–HDA Fe₃O₄ MNPs-based probe featuring chemosensing and magnetic separation has therefore been constructed. i.e. FITC–HDA Fe₃O₄ MNPs had a highly selective fluorescence response and enabled magnetic separation of TNT from other nitroaromatic compounds by quenching of the emission of FITC and capture of TNT in aqueous solution. Very good linearity was observed for TNT concentrations in the range 0.05–1.5 μmol?L^?1, with a detection limit of 37.2 nmol?L^?1 and RSD of 4.7 % (n?=?7). Approximately 12 % of the total amount of TNT was captured. The proposed methods are well-suited to trace detection and capture of TNT in aqueous solution.

Immobilization of anionic iron(III) porphyrins onto in situ obtained zinc oxide

A family of anionic iron(III) porphyrins (FePor) was immobilized onto zinc oxide (ZnO) obtained by the in situ hydrothermal decomposition of zinc hydroxide nitrate, a layered hydroxide salt. The immobilization probably occurred via the interaction between the anionic charges on the porphyrins and the positively charged surface of the ZnO, in slightly acidic to neutral pH. The resulting solids were characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRDP), Fourier transform infrared spectroscopy (FTIR), electron paramagnetic resonance (EPR), and ultraviolet-visible spectroscopy (UV-Vis) (solid samples), which confirmed the formation of ZnO and the immobilization of the FePor. The prepared materials were employed as catalysts for the heterogeneous catalytic oxidation of cyclooctene, cyclohexane, and n-heptane, using iodosylbenzene as the oxygen donor. Good catalytic results were achieved for all the substrates, and selectivity for the alcohol was verified during the oxidation of alkanes. The reuse capacity of the solid catalyst was also investigated.     

KCC-1 aminopropyl-functionalized supported on iron oxide magnetic nanoparticles as a novel magnetic nanocatalyst for the green and efficient synthesis of sulfonamide derivatives

A new magnetic nanocatalyst (Fe₃O₄@KCC-1-npr-NH₂) was synthesized directly through the reaction of Fe₃O₄@KCC-1 with (3-aminopropyl) triethoxysilane (APTES) using a hydrothermal protocol. Prepared nanocomposite was used as a magnetically reusable nanocatalyst for an efficient synthesis of a broad range of sulfonamide derivatives in water as a green solvent at room temperature and the products are collected by filtration with excellent yields (85–97%). The nanocatalyst could be remarkably recovered and reused after ten times without any significant decrease in activity. This mild and simple synthesis method offers some advantages including short reaction time, high yield and simple work-up procedure.     

Molecular composition of iron oxide nanoparticles, precursors for magnetic drug targeting, as characterized by confocal Raman microspectroscopy

The chemical and structural properties of ferrite-based nanoparticles, precursors for magnetic drug targeting, have been studied by Raman confocal multispectral imaging. The nanoparticles were synthesised as aqueous magnetic fluids by co-precipitation of ferrous and ferric salts. Dehydrated particles corresponding to co-precipitation (CP) and oxidation (OX) steps of the magnetic fluid preparation have been compared in order to establish oxidation-related Raman features. These are discussed in correlation with the spectra of bulk iron oxides (magnetite, maghemite and hematite) recorded under the same experimental conditions. Considering a risk of laser-induced conversion of magnetite into hematite, this reaction was studied as a function of laser power and exposure to oxygen. Under hematite-free conditions, the Raman data indicated that nanoparticles consisted of magnetite and maghemite, and no oxyhydroxide species were detected. The relative maghemite/magnetite spectral contributions were quantified via fitting of their characteristic bands with Lorentzian profiles. Another quality parameter, contamination of the samples with carbon-related species, was assessed via a broad Raman band at 1580 cm(-1). The optimised Raman parameters permitted assessment of the homogeneity and stability of the solid phase of prepared magnetic fluids using chemical imaging by Raman multispectral mapping. These data were statistically averaged over each image and over six independently prepared lots of each of the CP and OX nanoparticles. The reproducibility of oxidation rates of the particles was satisfactory: the maghemite spectral fraction varied from 27.8 +/- 3.6% for the CP to 43.5 +/- 5.6% for the OX samples. These values were used to speculate about the layered structure of isolated particles. Our data were in agreement with a model with maghemite core and magnetite nucleus. The overall oxidation state of the particles remained nearly unchanged for at least one month.     

Synthesis and characterization of poly(divinylbenzene)-coated magnetic iron oxide nanoparticles as precursor for the formation of air-stable carbon-coated iron crystalline nanoparticles

Maghemite (gamma-Fe2O3) nanoparticles of 15 +/- 3 nm diameter were prepared by nucleation of gelatin/iron oxide followed by growth of gamma-Fe2O3 films onto these nuclei. The gamma-Fe2O3 nanoparticles were coated with polydivinylbenzene (PDVB) by emulsion polymerization of divinylbenzene (DVB) in an aqueous continuous phase containing the gamma-Fe2O3 nanoparticles. The PDVB-coated gamma-Fe2O3 nanoparticles, dispersed in water, were separated from homo-PDVB nanoparticles using the high gradient magnetic field (HGMF) technique. The influence of DVB concentration on the amount of PDVB coating, on the size and size distribution of the coated gamma-Fe2O3 nanoparticles and on their magnetic properties, has been investigated. Air-stable carbon-coated iron (alpha-Fe/C) crystalline nanoparticles of 41 +/- 12 nm diameter have been prepared by annealing the PDVB-coated gamma-Fe2O3 nanoparticles at 1050 degrees C in an inert atmosphere. These nanoparticles exhibit high saturation magnetization value (83 emu g(-1)) and excellent resistance to oxidation. Characterization of the PDVB-coated gamma-Fe2O3 and of the alpha-Fe/C nanoparticles has been accomplished by TEM, HRTEM, DLS, FTIR, XRD, thermal analysis, zeta-potential, and magnetic measurements.