Aptamer based fluorescent cocaine assay based on the use of graphene oxide and exonuclease III-assisted signal amplification

The article reports an aptamer based assay for cocaine by employing graphene oxide and exonuclease III-assisted signal amplification. It is based on the following scheme and experimental steps: (1) Exo III can digest dsDNA with blunt or recessed 3-terminus, but it has limited activity to ssDNA or dsDNA with protruding 3-terminus; (2) GO can absorb the FAM-labeled ssDNA probe and quench the fluorescence of probe, while the affinity between FAM-labeled mononucleotide and GO is negligible; (3) Cocaine aptamer can be split into two flexible ssDNA pieces (Probe 1 and Probe 2) without significant perturbation of cocaine-binding abilities; (4) The triple complex consisting of Probe 1, Probe 2 and cocaine can be digested by Exo III with the similar efficiency as normal dsDNA. Cocaine aptamer is split into two flexible ssDNA pieces (Probe 2 and 3′-FAM-labeled Probe 1). Cocaine can mediate the cocaine aptamer fragments forming a triplex. The triple complex has unique characteristic with 3′-FAM-labeled blunt end at the Probe 1 and 3′-overhang end at Probe 2. If exonuclease III is added, it will catalyze the stepwise removal of fluorescein (FAM) labeled mononucleotides from the 3-hydroxy termini of the special triplex complex, resulting in liberation of cocaine. The cocaine released in this step can produce a new cleavage cycle, thereby leading to target recycling. Through such a cyclic bound-hydrolysis process, small amounts of cocaine can induce the cleavage of a large number of FAM-labeled probe 1. The cleaved FAM-labeled mononucleotides are not adsorbed on the surface of graphene oxide (GO), so a strong fluorescence signal enhancement is observed as the cocaine triggers enzymatic digestion. Under optimized conditions, the assay allows cocaine to be detected in the 1 to 500 nM concentration range with a detection limit of 0.1 nM. The method was applied to the determination of cocaine in spiked human plasma, with recoveries ranging from 92.0 to 111.8 % and RSD of <12.8 %.

Open image in new window

Graphical abstract Aptamer based fluorescent cocaine assay based on graphene oxide and exonuclease III-assisted signal amplification

     

A novel fluorescent biosensor for sequence-specific recognition of double-stranded DNA with the platform of graphene oxide

A fluorescent biosensor for sequence-specific recognition of double-stranded DNA (dsDNA) was developed based upon the DNA hybridization between dye-labeled single-stranded DNA (ssDNA) and double-stranded DNA. The fluorescence of FAM-labeled single-stranded DNA was quenched when it adsorbed on the surface of graphene oxide (GO). Upon addition of the target dsDNA, a homopyrimidine·homopurine part of dsDNA on the Simian virus 40 (SV40) (4424-4440, gp6), hybridization occurred between the dye-labeled DNA and the target dsDNA, which induced the dye-labeled DNA desorbed from the surface of GO, and turned on the fluorescence of the dye. Under the optimum conditions, the enhanced fluorescence intensity was proportional to the concentration of target dsDNA in the range 40.0-260 nM, and the detection limit was found to be 14.3 nM alongside the good sequence selectivity.     

Gold nanorods-based FRET assay for sensitive detection of Pb2+ using 8-17DNAzyme

In this paper, we have reported a sensitive assay for fluorescence "turn-on" detection of Pb(2+) in aqueous solutions based on FRET between gold nanorods (GNRs) and the FAM-labeled substrate strand of 8-17DNAzyme. The fluorescence of the FAM-labeled substrate strand is quenched when 8-17DNAzyme is adsorbed on GNRs surface through electrostatic interaction. In the presence of lead ions, the fluorescence is restored due to the decrease of FRET efficiency caused by the specific cleavage of the FAM-labeled substrate strand by the enzyme, which weakens the electrostatic interaction between the GNRs and short FAM-labeled DNA fragment. The interference of eleven common metal ions has been tested, indicating that Pb(2+) can be selectively detected. This method exhibits a high sensitivity for Pb(2+) with a detection limit of 61.8 pM and a linear range from 0.1 nM to 100 nM. It is a simple, sensitive, and selective method for Pb(2+) detection. Moreover, this sensing system obtained satisfying results for Pb(2+) detection in tap water samples.     

Pulsed amperometric detection of DNA with an ssDNA/polypyrrole-modified electrode

Pulsed amperometric detection (PAD) of target DNA with platinum electrodes modified by single-stranded DNA (ssDNA) entrapped within polypyrrole (ssDNA/Ppy) is reported for the first time. Single-stranded DNA 20-mers complementary to the target DNA were used to construct the DNA biosensors. Polymerase chain reaction (PCR) amplified bovine leukaemia virus (BLV) provirus DNA was used as target DNA. Electrochemical impedance spectroscopic (EIS) investigation of ssDNA/Ppy before and after incubation in target DNA-containing sample revealed significant changes in terms of an imaginary (Z) vs. a real (Z) component. The PAD results were in good agreement with EIS investigations. The PAD method was selected, because it does not require such sophisticated equipment as it is used to perform EIS and the results obtained can be more easily estimated. Optimum conditions for performing PAD and evaluating an analytical signal were elaborated. No label-binding step was necessary for detection of target DNA in PCR-amplified amplicons and detection time was reduced by as much as 30–35 min. The changes of PAD signals were at least 6–7 times higher if ssDNA/Ppy-modified electrodes instead of blank Ppy-modified electrodes were incubated in the target DNA solutions. If ssDNA/Ppy modified electrodes were incubated in non-complementary (control) DNA solution changes in PAD signals were smaller than those detected after incubation in complementary (target) DNA-containing solution by a factor of at least 6–8.     

EMSA and single-molecule force spectroscopy study of interactions between Bacillus subtilis single-stranded DNA-binding protein and single-stranded DNA

In this article, interactions between Bacillus subtilis single-stranded DNA binding proteins (BsSSB) and single-stranded DNA (ssDNA) were systematically studied. The effect of different molar ratios between BsSSB and ssDNA on their binding modes was first investigated by electrophoretic mobility shift assays (EMSAs). It is found that a high molar ratio of BsSSB to ssDNA can produce BsSSB-ssDNA complexes formed in the mode of two proteins binding one 65-nt (nucleotide) ssDNA whereas a low molar ratio facilitates the formation of BsSSB-ssDNA complexes in the mode of one protein binding one 65-nt ssDNA. Furthermore, two binding modes are in dynamic equilibrium. The unbinding force of BsSSB-ssDNA complexes was measured quantitatively in solutions with different salt concentrations by using AFM-based single-molecule force spectroscopy (SMFS). Our results show that the unbinding force is about 10 pN higher at high salt concentration (0.5 M NaCl) than at low salt concentration (0.1 M NaCl) and the lifetime of BsSSB-ssDNA complexes at high salt concentration is twice as long as that at low salt concentration. These results indicate that more tightly packed BsSSB-ssDNA complexes can form at high salt (0.5 M NaCl) concentration. In addition, the results of EMSA show that ssDNA, which is bound to BsSSB, can dissociate from BsSSB in the presence of the cDNA strand, indicating the dynamic nature of BsSSB-ssDNA interactions.     

Controlling DNA orientation on mixed ssDNA/OEG SAMs

We present and characterize a mixed self-assembled monolayer (SAM) consisting of single-stranded oligonucleotide (ssDNA)- and oligo(ethylene glycol) (OEG)-terminated thiols. The ssDNA/OEG SAMs are prepared by simultaneous coadsorption from a common thiol solution over a broad range of compositions. Electron spectroscopy for chemical analysis (ESCA) is used to measure the surface coverage of ssDNA, whereas surface plasmon resonance (SPR) sensor is used to measure the hybridization of complementary ssDNA and protein resistance. Through the complementary use of these techniques, we find that the composition of OEG in the assembly solution controls a key parameter: the surface coverage of ssDNA on the surface. There is evidence that it influences the orientation of the immobilized ssDNA probes. Lower OEG concentrations yield a surface with higher ssDNA coverage and less favorable orientation, whereas higher OEG concentrations produce a surface with lower DNA coverage and more favorable orientation. Competition between these two effects controls the hybridization efficiency of the ssDNA surface. Compared to ssDNA surfaces prepared with other diluent thiols, the use of OEG improves the protein resistance of the surface, making it more broadly applicable.     

Adsorptive Stripping Voltammetric Detection of Single‐Stranded DNA at Electrochemically Modified Glassy Carbon Electrode

Electrochemically modified glassy carbon electrode (GCE) was used to study the electrochemical oxidation and detection of denatured single‐stranded (ss) DNA by means of adsorptive stripping voltammetry. The modification of GCE, by electrochemical oxidation at +1.75 V (vs.SCE) for 10 min and cyclic sweep between +0.3 V and ?1.3 V for 20 cycles in pH 5.0 phosphate buffer, results in 100‐fold improvement in sensitivity for ssDNA detection. We speculated that the modified GCE has a high affinity to single‐stranded DNA through hydrogen bond (specific static adsorption). Single‐stranded DNA can accumulate at the GCE surface at open circuit and produce a well‐defined oxidation peak corresponding to the guanine residues at about +0.80 V in pH 5.0 phosphate buffer, while the native DNA gives no signal under the same condition. The peak currents are proportional to the ssDNA concentration in the range of 0–18.0 μg mL^?1. The detection limit of denatured ssDNA is ca. 0.2 μg mL^?1 when the accumulation time is 8 min at open circuit. The accumulation mechanism of ssDNA on the modified GCE was discussed.     

Enhancing the fluorescence intensity of DNA microarrays by using cationic surfactants

DNA microarrays have been used as powerful tools in genomics studies and single nucleotide polymorphisms analysis. However, the fluorescence detection used in most conventional DNA microarrays is still limited by its sensitivity. The aim of this study is to use a cationic surfactant, cetyl trimethylammonium bromide (CTAB), to enhance the fluorescence intensity of 6-carboxy-fluorescene (FAM)-labeled DNA probes immobilized on a DNA microarray. We show that in the presence of CTAB the immobilized FAM-labeled DNA probes is 11-fold brighter than that without exposure to CTAB. Similarly, when we hybridize FAM-labeled DNA targets to a DNA microarray and treat the surface with CTAB solution, the fluorescence intensity shows a 26-fold increase for perfect-match DNA targets. More importantly, the contrast between perfect-match and 1-mismatch DNA is also increased from 1.3-fold to 15-fold. This method offers a simple and efficient technique to enhance the detection limit of DNA microarrays.     

Liquid crystal-based detection of DNA hybridization using surface immobilized single-stranded DNA

The authors have investigated (a) the self-assembly of single-stranded DNA (ssDNA) on glass surfaces, and (b) the interaction of DNA with liquid crystals (LCs) on solid surfaces. The results suggest that ssDNA (compared to dsDNA) on the solid interface causes particularly different orientations in LCs. The LC molecules assume a uniform homeotropic orientation on the surface with a typical surface ssDNA coverage of ~2.4 × 10¹² molecules per square cm. Once complementary DNA is hybridized on the surface, the homotropic orientation of the LCs becomes disrupted. This orientation transition can be visually observed by using a crossed polarizer. The findings were exploiting to design an assay for target DNA (= analyte DNA) that has an ~0.1 nM detection limit. The assay is highly selective and can easily differentiate target DNA from single-base mismatch and non-complementary DNA. In our perception, it represents a powerful, label-free and portable DNA detection scheme.

Open image in new window

Graphical abstract Schematic illustration of the mechanism for orientation behavior of a liquid crystal film supported on different surfaces. The homeotropic orientation of LC molecules was induced by ssDNA with appropriate surface coverage and was disrupted by ssDNA with lower or higher surface coverage or P1/T1 complex. 5CB: 4-Cyano-4′-pentylbiphenyl. TEA: Triethoxysilylbutyraldehyde.

     

A low-cost surface plasmon resonance instrument based on detection of resonance excitation wavelength

A laboratory-made surface plasmon resonance (SPR) instrument based on the detection of resonance excitation wavelength has been successfully fabricated. The performance and workability of the SPR instrument was demonstrated as a DNA biosensor. Biotinylated single-stranded oligonucleotides (ssDNA) were chemically immobilized on a gold-film surface of the SPR instrument as a DNA probe for the detection of its fully complementary, half-complementary and non-complementary ssDNA. The immobilization of the ssDNA probe was done by avidin-biotin linkage. The ssDNA used were 12-mer oligonucleotides. The sensing mechanism was based on the shift in resonance wavelength of an excitation light beam as the target ssDNA hybridized with the ssDNA on the gold-film surface. The linear dynamic ranges of the DNA biosensor for fully complementary and half-complementary ssDNA are 0.04-1.2 pM and 0.08-1.1 pM, respectively. The DNA biosensor showed higher sensitivity to fully complementary ssDNA than to half-complementary ssDNA. But no shift of resonance wavelength to the non-complementary ssDNA was observed.     

Magnetic porous carbon nanocomposites derived from metal-organic frameworks as a sensing platform for DNA fluorescent detection

Metal-organic frameworks (MOFs) have emerged as very fascinating functional materials due to their tunable nature and diverse applications. In this work, we prepared a magnetic porous carbon (MPC) nanocomposite by employing iron-containing MOFs (MIL-88A) as precursors through a one-pot thermolysis method. It was found that the MPC can absorb selectively single-stranded DNA (ssDNA) probe to form MPC/ssDNA complex and subsequently quench the labelled fluorescent dye of the ssDNA probe, which is resulted from the synergetic effect of magnetic nanoparticles and carbon matrix. Upon the addition of complementary target DNA, however, the absorbed ssDNA probe could be released from MPC surface by forming double-stranded DNA with target DNA, and accompanied by the recovery of the fluorescence of ssDNA probe. Based on these findings, a sensing platform with low background signal for DNA fluorescent detection was developed. The proposed sensing platform exhibits high sensitivity with detection limit of 1 nM and excellent selectivity to specific target DNA, even single-base mismatched nucleotide can be distinguished. We envision that the presented study would provide a new perspective on the potential applications of MOF-derived nanocomposites in biomedical fields.     

Optical properties of an immobilized DNA monolayer from 255 to 700 nm

The real (n) and imaginary (k) refractive indices of an immobilized monolayer of 27 nucleotide (nt) single stranded DNA (ssDNA) and the corresponding double stranded DNA (dsDNA) are measured in the 255-700 nm range. Multiple techniques are used to obtain consistent estimation. The coverage is approximately 6.5% with an average interchain distance of tethered ssDNA molecules of approximately 11.8 nm, which is significantly larger than the "footprint" of the chain on the surface. The measured increase in n by approximately 5% between the ssDNA and the dsDNA is 20% smaller than the expected change due to doubling of the molecular weight. The change in k is not significant, indicating that the electron delocalization effect expected in dsDNA due to base pair stacking is not important at optical frequencies.     

Electrochemical deoxyribonucleic acid biosensor based on the self-assembly film with nanogold decorated on ionic liquid modified carbon paste electrode

An electrochemical DNA biosensor was fabricated by self-assembling probe single-stranded DNA (ssDNA) with a nanogold decorated on ionic liquid modified carbon paste electrode (IL-CPE). IL-CPE was fabricated using 1-butylpyridinium hexafluorophosphate as the binder and the gold nanoparticles were electrodeposited on the surface of IL-CPE (Au/IL-CPE). Then mercaptoacetic acid was self-assembled on the Au/IL-CPE to obtain a layer of modified film, and the ssDNA probe was further covalently-linked with mercaptoacetic acid by the formation of carboxylate ester with the help of N-(3-dimethylamino-propyl)-N'-ethylcarbodiimide hydrochloride and N-hydroxysuccinimide. The hybridization reaction with the target ssDNA was monitored with methylene blue (MB) as the electrochemical indicator. Under the optimal conditions, differential pulse voltammetric responses of MB was proportional to the specific ssDNA arachis sequences in the concentration range from 1.0×10(-11) to 1.0×10(-6) mol L(-1) with the detection limit as 1.5×10(-12) mol L(-1) (3σ). This electrochemical DNA sensor exhibited good stability and selectivity with the discrimination ability of the one-base and three-base mismatched ssDNA sequences. The polymerase chain reaction product of arachis Arabinose operon D gene was successfully detected by the proposed method, which indicated that the electrochemical DNA sensor designed in this paper could be further used for the detection of specific ssDNA sequence.     

Characterization of single- and double-stranded DNA on gold surfaces

Single- and double-stranded deoxy ribonucleic acid (DNA) molecules attached to self-assembled monolayers (SAMs) on gold surfaces were characterized by a number of optical and electronic spectroscopic techniques. The DNA-modified gold surfaces were prepared through the self-assembly of 6-mercapto-1-hexanol and 5'-C(6)H(12)SH -modified single-stranded DNA (ssDNA). Upon hybridization of the surface-bound probe ssDNA with its complimentary target, formation of double-stranded DNA (dsDNA) on the gold surface is observed and in a competing process, probe ssDNA is desorbed from the gold surface. The competition between hybridization of ssDNA with its complimentary target and ssDNA probe desorption from the gold surface has been investigated in this paper using X-ray photoelectron spectroscopy, chronocoulometry, fluorescence, and polarization modulation-infrared reflection absorption spectroscopy (PM-IRRAS). The formation of dsDNA on the surface was identified by PM-IRRAS by a dsDNA IR signature at approximately 1678 cm(-)(1) that was confirmed by density functional theory calculations of the nucleotides and the nucleotides' base pairs. The presence of dsDNA through the specific DNA hybridization was additionally confirmed by atomic force microscopy through colloidal gold nanoparticle labeling of the target ssDNA. Using these methods, strand loss was observed even for DNA hybridization performed at 25 degrees C for the DNA monolayers studied here consisting of attachment to the gold surfaces by single Au-S bonds. This finding has significant consequence for the application of SAM technology in the detection of oligonucleotide hybridization on gold surfaces.     

Thermodynamic analysis of DNA binding by a Bacillus single stranded DNA binding protein

Background

Single-stranded DNA binding proteins (SSB) are essential for DNA replication, repair, and recombination in all organisms. SSB works in concert with a variety of DNA metabolizing enzymes such as DNA polymerase.

Results

We have cloned and purified SSB from Bacillus anthracis (SSB_BA). In the absence of DNA, at concentrations ??100 ??g/ml, SSB_BA did not form a stable tetramer and appeared to resemble bacteriophage T4 gene 32 protein. Fluorescence anisotropy studies demonstrated that SSB_BA bound ssDNA with high affinity comparable to other prokaryotic SSBs. Thermodynamic analysis indicated both hydrophobic and ionic contributions to ssDNA binding. FRET analysis of oligo(dT)₇₀ binding suggested that SSB_BA forms a tetrameric assembly upon ssDNA binding. This report provides evidence of a bacterial SSB that utilizes a novel mechanism for DNA binding through the formation of a transient tetrameric structure.

Conclusions

Unlike other prokaryotic SSB proteins, SSB_BA from Bacillus anthracis appeared to be monomeric at concentrations ??100 ??g/ml as determined by SE-HPLC. SSB_BA retained its ability to bind ssDNA with very high affinity, comparable to SSB proteins which are tetrameric. In the presence of a long ssDNA template, SSB_BA appears to form a transient tetrameric structure. Its unique structure appears to be due to the cumulative effect of multiple key amino acid changes in its sequence during evolution, leading to perturbation of stable dimer and tetramer formation. The structural features of SSB_BA could promote facile assembly and disassembly of the protein-DNA complex required in processes such as DNA replication.     

Topographical and functional characterization of the ssDNA probe layer generated through EDC-mediated covalent attachment to nanocrystalline diamond using fluorescence microscopy

The covalent attachment method for DNA on nanocrystalline diamond (NCD), involving the introduction of COOH functionalities on the surface by photoattachment of 10-undecenoic acid (10-UDA), followed by the 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC)-mediated coupling to NH 2-labeled ssDNA, is evaluated in terms of stability, density, and functionality of the resulting biological interface. This is of crucial importance in DNA biosensor development. The covalent nature of DNA attachment will infer the necessary stability and favorable orientation to the ssDNA probe molecules. Using confocal fluorescence microscopy, the influence of buffer type for the removal of excess 10-UDA and ssDNA, the probe ssDNA length, the probe ssDNA concentration, and the presence of the COOH-linker on the density and functionality of the ssDNA probe layer were investigated. It was determined that the most homogeneously dense and functional DNA layer was obtained when 300 pmol of short ssDNA was applied to COOH-modified NCD samples, while H-terminated NCD was resistant for DNA attachment. Exploiting this surface functionality dependence of the DNA attachment efficiency, a shadow mask was applied during the photochemical introduction of the COOH-functionalities, leaving certain regions on the NCD H-terminated. The subsequent DNA attachment resulted in a fluorescence pattern corresponding to the negative of the shadow mask. Finally, NCD surfaces covered with mixtures of the 10-UDA linker molecule and a similar molecule lacking the COOH functionality, functioning as a lateral spacer, were examined for their suitability in preventing nonspecific adsorption to the surface and in decreasing steric hindrance. However, purely COOH-modified NCD samples, patterned with H-terminated regions and treated with a controlled amount of probe DNA, proved the most efficient in fulfilling these tasks.     

Direct visualization of enzymatic cleavage and oxidative damage by hydroxyl radicals of single-stranded DNA with a cationic polythiophene derivative

A new method has been developed for the label-free, convenient, and real-time monitoring of the cleavage of single-stranded DNA by single-strand-specific S1 nuclease and hydroxyl radical based on cationic water-soluble poly[3-(3'-N,N,N-triethylamino-1'-propyloxy)-4-methyl-2,5-thiophene hydrochloride](PMNT). The PMNT can form an interpolyelectrolyte complex with ssDNA (duplex) through electrostatic interactions, in which PMNT takes a highly conjugated and planar conformation, and thus PMNT exhibits a relatively red-shifted absorption wavelength. When ssDNA is hydrolyzed by S1 nuclease or hydroxyl radical into small fragments, the PMNT/ssDNA duplex cannot form. In this case, the PMNT remains in random-coil conformation and exhibits a relatively short absorption wavelength. The nuclease digestion or oxidative damage by hydroxyl radical of DNA can be monitored by absorption spectra or just visualized by the "naked-eye" in view of the observed PMNT color changes in aqueous solutions. This assay is simple and rapid, and there is no need to label DNA substrates. The most important characteristic of the assay is direct visualization of the DNA cleavage by the "naked-eye", which makes it more convenient than other methods that rely on instrumentation. The assay also provides a promising application in drug screening based on the inhibition of oxidative damage of DNA.     

Construction of ssDNA-Attached LR-Chimera Involving Z-DNA for ZBP1 Binding Analysis

The binding of proteins to Z-DNA is hard to analyze, especially for short non-modified DNA, because it is easily transferred to B-DNA. Here, by the hybridization of a larger circular single-stranded DNA (ssDNA) with a smaller one, an LR-chimera (involving a left-handed part and a right-handed one) with an ssDNA loop is produced. The circular ssDNAs are prepared by the hybridization of two ssDNA fragments to form two nicks, followed by nick sealing with T4 DNA ligase. No splint (a scaffold DNA for circularizing ssDNA) is required, and no polymeric byproducts are produced. The ssDNA loop on the LR-chimera can be used to attach it with other molecules by hybridization with another ssDNA. The gel shift binding assay with Z-DNA specific binding antibody (Z22) or Z-DNA binding protein 1 (ZBP1) shows that stable Z-DNA can form under physiological ionic conditions even when the extra ssDNA part is present. Concretely, a 5′-terminal biotin-modified DNA oligonucleotide complementary to the ssDNA loop on the LR-chimera is used to attach it on the surface of a biosensor inlaid with streptavidin molecules, and the binding constant of ZBP1 with Z-DNA is analyzed by BLI (bio-layer interferometry). This approach is convenient for quantitatively analyzing the binding dynamics of Z-DNA with other molecules.     

An aptamer-based colorimetric assay for chloramphenicol using a polymeric HRP-antibody conjugate for signal amplification

We describe an aptamer-based colorimetric assay for chloramphenicol (CAP) based on the ability of anti-single-stranded DNA antibody (anti-ssDNA Ab) to recognize ssDNA, and the catalytic ability of PowerVision (PV), which is a polymeric conjugate of horseradish peroxidase and antibody with a high enzyme-to-antibody ratio. The complementary DNA of the aptamer (cDNA) was immobilized on magnetic gold nanoparticles (Fe₃O₄@Au) and used as a capture probe (AuMNPs-cDNA). The ssDNA Ab and PV were conjugated to AuNPs to form signal tags that recognize ssDNA with anti-ssDNA Ab to form beads containing the amplified probe (AuMNPs-cDNA@anti-ssDNA Ab/PV-AuNPs). The PV on their surface catalyzes the oxidation of the substrate 3,3’,5,5’-tetramethylbenzidine to produce a color change which is quantified by absorptiometry at 652 nm. The assay has a linear calibration plot for CAP in the 0.01 to 100 ng mL⁻¹ range, with a detection limit as low as 3 pg mL⁻¹. The method was successfully employed to detect CAP in real samples. Results were consistent with data obtained using a conventional enzyme-linked immunosorbent assay.

PowerVision- labeled gold nanoparticles acting as signal tag catalyze the H₂O₂-mediated oxidation of TMB for color development, which can be observed by bare eyes and quantified by ultraviolet-visible spectroscopy.