Molecular dynamics study of 2rotaxanes: influence of solvation and cation on co-conformation

The conformational preference of a [2]rotaxane system has been examined by molecular dynamics simulations. The rotaxane wheel consists of two bridged binding components: a cis-dibenzo-18-crown-6 ether and a 1,3-phenyldicarboxamide, and the penetrating axle consists of a central isophthaloyl unit with phenyltrityl capping groups. The influence of solvation on the co-conformation of the [2]rotaxane was evaluated by comparing the conformational flexibility in two solvents: chloroform and dimethyl sulfoxide. Attention was also paid to the effect of cation binding on the dynamical properties of the [2]rotaxane. The conformational stability of the [2]rotaxane was calculated using a MM/PB-SA strategy, and the occurrence of specific motions was examined by essential dynamics analysis. The changes in the co-conformational properties in the two solvents and upon cation binding are discussed in light of the available NMR data. The results indicate that in chloroform solution the [2]rotaxane system exists as a mixture of co-conformational states including some that have hydrogen bonds between axle C=O and wheel NH groups. Analysis of the simulations allow us to hypothesize that the [2]rotaxane's circumrotation motion can occur as the result of a dynamic process that combines a preliminary axle sliding step that breaks these hydrogen bonds and a conformational change in the ester group more distant from the wheel. In contrast, no hydrogen-bonded co-conformation was found in dimethyl sulfoxide, which appears to be due to the preferential formation of hydrogen bonds between the wheel NH groups with solvent molecules. Moreover, the axle experiences notable changes in anisotropic shielding, which would explain why the NMR signals are broadened in this solvent. Insertion of a sodium cation into the crown ether reduces co-conformational flexibility due to an interaction of the axle with the cation. Overall, the results reveal how both solvent and ionic atmosphere can influence the co-conformational preferences of rotaxanes.     

A self-threaded "molecular 8"

A new type of [1]rotaxanes containing two aliphatic bridges between axle and wheel is obtained in 39% yield in a one-step synthesis starting from a [2]rotaxane which contained one sulfonamide group each in both the wheel and the axle. Temperature controlled chemoselective substitution reactions first at these sulfonamide nitrogens and then subsequently at the various other carboxamide nitrogens in the wheel and axle give rise to the formation of an isomeric mixture of three double-bridged [1]rotaxanes which could be separated by HPLC. Structure determination of the main product 3a was possible by NMR experiments supported by molecular modeling calculations. Using different reaction conditions, a double-substituted but not yet bridged [2]rotaxane 4 could be isolated as an intermediate giving further evidence for the assigned structure of 3a and the way of its formation. The shape of this double-bridged [1]rotaxane 3a reminds of a self-intertwining chiral "molecular 8", in which any possible racemization due to deslipping is hindered by the two stoppers originating from the former rotaxane axle. Hence, to the best of our knowledge this is the first example of a molecule in which both concepts, cycloenantiomerism and helical chirality, are realised in one structure. Enantiomer separation of the main product was possible by further HPLC using chiral stationary phases. The Cotton effects of the circular dichrograms are different to those of the already synthesized [1]rotaxanes bearing just one aliphatic bridge between axle and wheel.     

Thermally responsive shuttling behavior of a pillar[6]arene-based [2]rotaxane

A [2]rotaxane constructed from a per-ethylated pillar[6]arene as a wheel and a pyridinium derivative as an axle was prepared. The wheel segment of the per-ethylated pillar[6]arene moved from one station to another along the axle as a result of thermal stimuli.     

2]Rotaxanes containing pyridinium-phosphonium axles and 24-crown-8 ether wheels

A triethylphosphonium group attached to a pyridinium ethane moiety can be used as an axle for the self-assembly of [2]pseudorotaxanes and [2]rotaxanes. Although [2]pseudorotaxane formation is limited due to the bulk of the PR4+ group, [2]rotaxanes can be formed utilising 24-crown-8 ether, benzo-24-crown-8 ether and naphtho-24-crown-8 ether. The synthesis of these [2]rotaxanes and the X-ray structure of the [2]rotaxane containing a 24-crown-8 ether wheel are described. When the crown ether contains an aromatic group two possible conformational isomers exist; these are identified at low temperature by 1H and 31P NMR spectroscopy.     

1]rotaxanes and pretzelanes: synthesis, chirality, and absolute configuration [In Process Citation

The synthesis of aliphatically bridged [1](n)rotaxanes and (n)pretzelanes in preparative yields and the dependency of their chiroptical properties on the length (n) of their bridge are reported. A cycloenantiomeric bis(sulphonamide)[2]rotaxane with a sulphonamide group in its axle and its wheel was intramolecularly dialkylated by homologous bifunctional oligomethylene reagents to form chiral [1](n)rotaxanes bearing bridges of different lengths (n) between the axle and the wheel. Intramolecular dialkylation by 1,omega-dibromoalkanes of a topologically chiral bis(sulphonamide)[2]catenane with a sulphonamide group in both of the macrolactam rings leads to pretzel shaped molecules ((n)pretzelanes) with homologous bridges between the two macrocycles. Their yields decrease with decreasing length of the bridge. The shortest bridge isolated so far in reasonable amounts consists of six methylene groups ((6)pretzelane). Remarkably, a covalent connection of axle and wheel in a [2]rotaxane was successful even with much shorter bridges-down to only three methylene groups ([1](3)rotaxane). The structural changes of the [1](n)rotaxanes with decreasing bridge length is expressed by an increasing high-field shift in the 1H NMR spectra. Enantiomeric resolution of the racemates of both series was achieved in seven cases for the [1](n)rotaxanes and two for the (n)pretzelanes by use of chiral HPLC columns. The circular dichrograms of both compound families show a strong dependency on the length of the bridge. However, the shortest bridges displayed some additional unexpected deviations. A new specification of the absolute configuration of supramolecules, such as [n]catenanes, [n]rotaxanes and (n)pretzelanes is introduced together with some nomenclature additions.     

Supramolecular shuttle based on inclusion complex between cucurbit[6]uril and bispyridinium ethylene

Cucurbit[6]uril (CB6) and bispyridinium ethylene form a stable inclusion complex. A rotaxane derived from this complex was prepared in which a CB6 wheel shuttles along an axle in an NMR time-resolved regime.     

Redox behavior of ferrocene-containing rotaxane: transposition of the rotaxane wheel by redox reaction of a ferrocene moiety tethered at the end of the axle

A rotaxane with a ferrocene moiety at the axle terminus was prepared. The redox potential of the ferrocene moiety decreased by ca. 80 mV when the rotaxane had a crown ether wheel capable of moving on the axle. Thus, the stabilization of the oxidized state of the ferrocene moiety is assumed to accompany the transposition of the wheel component on the axle toward the ferrocene moiety. [reaction--see text]     

Insights into the Difference Between Rotaxane and Pseudorotaxane

Rotaxane and pseudorotaxane are two types of mechanically interlocked molecular architectures, and there is a clear topological difference and boundary between them. In this work, a “suggested [2]rotaxane 1 ⊂α‐CD” was constructed based on axle molecule 1 bearing two terminal ferrocene groups and a wheel component α‐cyclodextrin (α‐CD), but the result obtained indicated that the ferrocene group cannot prevent α‐CD dethreading under UV irradiation. That is, 1 ⊂α‐CD is just a pseudo[2]rotaxane. Furthermore, the two ferrocene groups in 1 ⊂α‐CD were encapsulated by two cucurbit[7]uril (CB[7]) units to obtain a heteropseudo[4]rotaxane 1 ⊂α‐CD⋅2CB[7]. This heteropseudo[4]rotaxane displayed high stability towards harsh temperatures and the isomerization of azobenzene in 1 , so it can be regarded as a [2]rotaxane. In this [2]rotaxane, the stoppers are not the bulky groups covalently bonded to the axle, but the cyclic CB[7] units connected through noncovalent interactions.     

Calix[4]arene‐Based Rotaxane Host Systems for Anion Recognition

The synthesis, structure and anion binding properties of the first calix[4]arene‐based [2]rotaxane anion host systems are described. Rotaxanes 9? Cl and 12? Cl, consisting of a calix[4]arene functionalised macrocycle wheel and different pyridinium axle components, are prepared via adaption of an anion templated synthetic strategy to investigate the effect of preorganisation of the interlocked host’s binding cavity on anion binding. Rotaxane 12? Cl contains a conformationally flexible pyridinium axle, whereas rotaxane 9? Cl incorporates a more preorganised pyridinium axle component. The X‐ray crystal structure of 9? Cl and solution phase ¹H NMR spectroscopy demonstrate the successful interlocking of the calix[4]arene macrocycle and pyridinium axle components in the rotaxane structures. Following removal of the chloride anion template, anion binding studies on the resulting rotaxanes 9? PF₆ and 12? PF₆ reveal the importance of preorganisation of the host binding cavity on anion binding. The more preorganised rotaxane 9? PF₆ is the superior anion host system. The interlocked host cavity is selective for chloride in 1:1 CDCl₃/CD₃OD and remains selective for chloride and bromide in 10 % aqueous media over the more basic oxoanions. Rotaxane 12? PF₆ with a relatively conformationally flexible binding cavity is a less effective and discriminating anion host system although the rotaxane still binds halide anions in preference to oxoanions.     

The Effect of Incorporating Fréchet Dendrons into Rotaxanes and Molecular Shuttles Containing the 1,2‐Bis(pyridinium)ethane⊂[24]Crown‐8 Templating Motif

Fréchet‐type dendrons (G0–G3) were added as both axle stoppering units and cyclic wheel appendages in a series of [2]rotaxanes, [3]rotaxanes, and molecular shuttles that employ 1,2‐bis(pyridinium)ethane axles and 24‐membered crown ethers wheels. The addition of dendrimer wedges as stoppering units dramatically increased the solubility of simple [2]rotaxanes in nonpolar solvents. The X‐ray structure of a G1‐stoppered [2]rotaxane shows how the dendritic units affect the structure of the interlocked components. Increased solubility allows observation of how the interaction of dendritic units on separate components in interlocked molecules influences switching properties and molecular size. In a series of [2]rotaxane molecular shuttles incorporating two recognition sites, it was demonstrated that an increase in generation on either the stoppering unit or cyclic wheel could influence both the rate of shuttling and the site preference of the wheel on the axle.     

Rotaxane axle as an effective scaffold: synthesis of functionalized [3]rotaxane and connection of the wheel components arranged on the axle

A [3]rotaxane consisting of a bis(sec-ammonium)-type axle and two functionalized dibenzo-24-crown-8-ether wheels was prepared in a good yield. The two point connection of the wheel components placed on the axle of the rotaxane was achieved by the Michael addition of hexanedithiol to the methacrylate CC bonds of the wheels to afford the corresponding [2]rotaxanes.     

Chiral [1]Rotaxanes: X‐Ray Structures and Chiroptical Properties

New chiral [1]rotaxanes with aromatic bridges were prepared in yields up to 72% starting from a [2]rotaxane with sulfonamide groups in wheel and axle. The X‐ray structures of the parent [2]rotaxane 1 and of the three [1]rotaxanes 3e , g , h were solved which show networks of H‐bonds between wheel and axle. The separation of the racemic mixtures of four of the [1]rotaxanes, i.e., of 3a , b , d , e , was possible with HPLC on Chiralcel OD. The aromatic chromophores in the bridges lead to a considerable enhancement of the intensities of the molar CD as compared to the analogues with aliphatic bridges. In one case ( 3d ), the Cotton effects are as strong as those usually found in helicenes.     

Active Esters as Pseudostoppers for Slippage Synthesis of [2]Pseudorotaxane Building Blocks: A Straightforward Route to Multi‐Interlocked Molecular Machines

The efficient synthesis and very easy isolation of dibenzo[24]crown‐8‐based [2]pseudorotaxane building blocks that contain an active ester motif at the extremity of the encircled molecular axle and an ammonium moiety as a template for the dibenzo[24]crown‐8 is reported. The active ester acts both as a semistopper for the [2]pseudorotaxane species and as an extensible extremity. Among the various investigated active ester moieties, those that allow for the slippage process are given particular focus because this strategy produces fewer side products. Extension of the selected N‐hydroxysuccinimide ester based pseudorotaxane building block by using either a mono‐ or a diamino compound, both containing a triazolium moiety, is also described. These provide a pH‐dependent two‐station [2]rotaxane molecular machine and a palindromic [3]rotaxane molecular machine, respectively. Molecular machinery on both interlocked compounds through variation of pH was studied and characterized by means of NMR spectroscopy.     

Controlling the rate of shuttling motions in [2]rotaxanes by electrostatic interactions: a cation as solvent-tunable brake

A series of rotaxanes, with phenolic axle centerpieces and tetralactam macrocycles as the wheels, has been prepared in good yields. The threaded rotaxane structure is confirmed in the gas phase by tandem mass spectrometric experiments through a detailed fragmentation pattern analysis, in solution by NMR spectroscopy, and in the solid state through X-ray crystallography. A close inspection of the 1H,1H NOESY and 1H,1H ROESY NMR data reveals the wheel to travel along the axle between two degenerate diamide "stations" close to the two stoppers. By deprotonation of a phenolic OH group in the axle centerpiece with Schwesinger's P1 base, surprisingly no additional shuttling station is generated at the axle center, although the wheel could form rather strong hydrogen bonds with the phenolate. Instead, the wheel continues to travel between the two diamide stations. Experimental data from 1H,1H NOESY spectra, together with theoretical calculations, show that strong electrostatic interactions between the phenolate moiety and the P1 cation displace the wheel from the "phenolate station". The cation acts as a "brake" for the shuttling movement. Instead of suppressing the shuttling motion completely, as observed in other rotaxanes, our rotaxane is the first system in which electrostatic interactions modulate the speed of the mechanical motion between a fast and a slow motion state as a response to a reversible external stimulus. By tuning these electrostatic interactions through solvent effects, the rate of movement can be influenced significantly, when for example different amounts of DMSO are added to dichloromethane. Besides the shuttling motion, circumrotation of the wheel around the axle is observed and analyzed by variable temperature NMR spectroscopy. Force field and AM1 calculations are in good agreement with the experimental findings.     

Frontispiece: The Effect of the Axle End Structure and Number of Through-Space Bonds on the Properties of Rotaxane Crosslinked Polymers

A rotaxane crosslinker (RC) is known to toughen the resulting rotaxane crosslinked polymer (RCP) via a stress dispersion effect that is attributed to the movable nature of the crosslinking structure. To evaluate this toughening mechanism in detail, a series of structure-definite RCs equipped with different axle end structures or different numbers of wheel components were synthesized, and subjected to free radical polymerization with a vinyl monomer to obtain RCPs. Analyses of the obtained RCPs revealed that the size of the axle end structure should be well-balanced to produce a strong toughening effect, and a [3]rotaxane crosslinker works more effectively than [2]rotaxane to toughen RCPs. The mobility of the crosslinking points, in terms of rotational and flipping movements, was more crucial to toughening the RCP than that of translational movement along the axle. The first observation of the above crucial findings proved the utility of the systematic molecular design used in this study.     

pH-Switched fluorescent pseudorotaxane assembly of cucurbit[7]uril with bispyridinium ethylene derivatives

¹H NMR spectra and fluorescence analysis revealed that the molecular shuttle and pseudorotaxane assembly of Q[7] with guest G²⁺ can be significantly switched via protonation and deprotonation of the terminal carboxylates of the guest.     

High-yield diastereoselective synthesis of planar chiral [2]- and [3]rotaxanes constructed from per-ethylated pillar[5]arene and pyridinium derivatives

Planar chiral [2]- and [3]rotaxanes constructed from pillar[5]arenes as wheels and pyridinium derivatives as axles were obtained in high yield using click reactions. The process of rotaxane formation was diastereoselective; the obtained [2]rotaxane was a racemic mixture consisting of (pS, pS, pS, pS, pS) and (pR, pR, pR, pR, pR) forms of the per-ethylated pillar[5]arene (C2) wheel, and other possible types of the [2]rotaxane did not form. Isolation of the enantiopure [2]rotaxanes with one axle through (pS, pS, pS, pS, pS)-C2 or (pR, pR, pR, pR, pR)-C2 wheels was accomplished. Furthermore, pillar[5]arene-based [3]rotaxane was successfully synthesized by attachment of two pseudo [2]rotaxanes onto a bifunctional linker. [3]Rotaxane formed in a 1:2:1 mixture with one axle threaded through two (pS, pS, pS, pS, pS)-C2, one (pS, pS, pS, pS, pS)-C2 and one (pR, pR, pR, pR, pR)-C2 (meso form), or two (pR, pR, pR, pR, pR)-C2 wheels. The [3]rotaxane enantiomers and the meso form were successfully isolated using appropriate chiral HPLC column chromatography. The procedure developed in this study is the starting point for the creation of pillar[5]arene-based interlocked molecules.     

Star/Linear Polymer Topology Transformation Facilitated by Mechanical Linking of Polymer Chains

Topology transformation of a star polymer to a linear polymer is demonstrated for the first time. A three‐armed star polymer possessing a mechanical linking of two polymer chains was synthesized by the living ring‐opening polymerization of δ‐valerolactone initiated by a pseudo[2]rotaxane having three hydroxy groups as the initiator sites on the wheel component and at both axle termini. The polymerization was followed by the propagation end‐capping reaction with a bulky isocyanate not only to prevent the wheel component deslippage but also to introduce the urethane moiety at the axle terminal. The resulting rotaxane‐linked star polymer with a fixed rotaxane linkage based on the ammonium/crown ether interaction was subjected to N‐acetylation of the ammonium moiety, which liberated the components from the interaction to move the wheel component to the urethane terminal as the interaction site, eventually affording the linear polymer. The physical property change caused by the present topology transformation was confirmed by the hydrodynamic volume and viscosity.     

Synthesis and characterization of a metallocycle-based molecular shuttle

Kinetically stable metallocycle-based molecular shuttles of [2]rotaxanes 4a and 4b, along with [3]rotaxanes 5a and 5b, have been prepared using the rhenium(I)-bridged metallocycle 2 and the dumbbell components containing two stations, 3a and 3b. The rotaxanes were self-assembled by hydrogen bonding interactions upon heating a Cl(2)CHCHCl(2) solution containing their components at 70 degrees C. Each rotaxane was isolated in pure form by silica gel chromatography under ordinary laboratory conditions and fully characterized by elemental analysis and various spectroscopic methods. The (1)H NMR signals for the amide NH and the methylene -(CH(2))(4)- of the station were considerably changed when occupied by the metallocycle. In [2]rotaxane 4b, which has a larger naphthyl spacer, the occupied and unoccupied stations gave widely separated signals in the (1)H NMR spectroscopy at room temperature, but averaged signals of two stations were observed in [2]rotaxane 4a, which has a smaller phenyl spacer. This is attributed to the shuttling of the metallocycle between two stations. The coalescence temperature experiment gave a shuttling rate of approximately 670 s(-)(1) at 19 degrees C in CDCl(3), corresponding to an activation free energy (DeltaG()) of 13.3 kcal/mol. With respect to the relative position of the chloride in the rhenium(I) center, two diastereomers are possible in the [2]rotaxane and three diastereomers are possible in the [3]rotaxane. In fact, the rotaxanes exist as diastereomeric mixtures in nearly equal amounts of all possible diastereomers on the basis of the amide NH signals of the station in the (1)H NMR spectroscopy.     

Axle length- and solvent-controlled construction of (pseudo)[1]rotaxanes from mono-thiourea-functionalised pillar[5]arene derivatives

A series of thiourea-functionalised pillar[5]arene derivatives 3ⁿm were constructed from a series of mono-amide-functionalised pillar[5]arenes 2ⁿ. The formation of their free forms or (pseudo)[1]rotaxane structures were controlled by their axle lengths or solvents, which were investigated by ¹H NMR spectroscopy. Some of (pseudo)[1]rotaxane structures were also supported by their single-crystal structures.