Aqueous surfactant two-phase systems in a mixture of cationic gemini and anionic surfactants

The phase behavior as well as the microstructures of the cationic gemini surfactant and anionic conventional surfactant aqueous two-phase system (ASTP) have been studied. The ASTP formation can be attributed to the coexistence of different kinds of aggregates in the upper and lower phases. The effects of temperature, shearing, surfactant concentration and mixing molar ratio on the phase separation of the ASTP-forming systems are systematically investigated. The ASTP can be destroyed by applying shear and increasing temperature. In this process, the lamellar structures (flat bilayers) in the ASTP are transformed into vesicles. Variation of surfactant structure also affects the phase behavior and the aggregates transformation. Appropriate molecular packing is crucial for the formation of ASTP.     

Spectrophotometric determination of cationic and anionic surfactants with anionic dyes in the presence of nonionic surfactants,part I: A general aspect

The behavior of color development of anionic azo dyes, methyl orange and its analogues, was examined in aqueous media by changing the microenvironment of the dyes. The addition of alcohols, organic onium ions, anionic surfactants and nonionic surfactants brought about a decrease of the band at wavelengths near 480 nm and an increase of the band at wavelengths near 420 nm. Such a shift toward the shorter wavelengths in spectra was attributed to the change of the micro-environment around the dyes from a polar field to a less polar field; that is, the shift is caused by the change of the contribution of the following resonance forms, On the basis of the color change phenomena, the spectrophotometric methods for the determination of organic onium ions and anionic surfactants were proposed.     

Spectrophotometric determination of cationic and anionic surfactants with anionic dyes in the presence of nonionic surfactants,part II: Development of batch and flow injection methods

On the basis of the changes in absorption spectra of azo dyes on the addition of an organic onium ion, spectrophotometric methods for the determination of organic onium salts and anionic surfactants were developed, and applied to flow injection method. Propyl orange (PO^–) was used for the determination of organic onium ions. Pairs of PO^– and Zeph⁺ (tetradecyldimethyl-benzylammonium ion) or PO^– and nC₁₈TMA⁺ (n-octadecyltrimethylammonium ion) were used for the determination of anionic surfactants. The determination range of organic onium ions were (0–3) × 10^–5 M by a batch method and were (0–2) × 10^–5 M by a flow injection method. The determination ranges of anionic surfactants were (0–2) × 10^–5 M by the batch method, and were (0–5) × 10^–5 M by the flow injection method, and the detection limit corresponding toS/N = 3 was 3 × 10^–7 M by the flow injection method. By the proposed flow injection method, anionic surfactants in water samples were determined.     

Ion decontamination with a mixture of cationic and anionic surfactants

The composition of mixed micelles and mixed micelle — solution interfaces changes with the concentration and molar ratio of the cationic and anionic surfactants present. The micelle — solution interface includes besides the headgroups of both surfactants, the counterions of the surfactant in excess. The finding of an enhanced binding of counterions to mixed micelles may be of some practical importance in decontamination.     

Mixtures of nonionic and anionic surfactants: interactions with low-molecular-mass homopeptides

The interaction between low molecular-mass homopeptides and mixtures of nonionic and anionic surfactants has been assessed by using reversed-phase thin-layer chromatography. The relative strength of interaction for mixtures of sodium dodecylsulfate and tridecylalcohol diglycolate (GNX) at the molar ratios of 8:2, 6:4, 4:6 and 2:8 has been calculated and its relationship with the physicochemical parameters (number of amino acid units, hydrophobicity, side chain bulkiness, electronic characteristics) of peptides has been computed by stepwise regression analysis. Each peptide interacted with each surfactant mixture the strength of interaction markedly depending on both the character of the peptide and the composition of the surfactant mixture. The hydrophobicity and electronic properties of the amino acid units exerted the highest influence on the strength of interaction at the highest concentration of the nonionic surfactant (GNX) whereas the number of amino acid units in the peptide molecule and the bulkiness of the amino acid side chain governed the strength of interaction at the lowest concentration of GNX.     

芳香族小分子物质在表面活性剂溶液中的状态

阴、阳离子表面活性剂在水溶液中混合后很容易形成沉淀,因而以往在应用上将这两种表面活性剂视为配伍禁忌。但是最近几年,混合阴、阳离子表面活性剂水溶液理论性质的研究受到了一种程度的重视。研究发现,该混合体系具有与单纯的离子型表面活性剂或离子与非离子型表面活性剂混合物十分不同的性质,     

Microemulsions from silicone oil with an anionic/nonionic surfactant mixture

Microemulsion phases have been prepared for the first time from the silicone oil "M(2)" (hexamethyldisiloxane) and a surfactant mixture of a nonionic surfactant "IT 3" (isotridecyltriethyleneglycolether) and an ionic surfactant Ca(DS)(2) (calciumdodecylsulfate). For such a surfactant mixture the hydrophilicity of the system can be tuned by the mixing ratio of the two components. With increasing IT 3 content, the surfactant mixtures show a L(1)-phase, a wide L(α)-region and a narrow L(3) sponge phase. For constant temperature, two single phase channels exist in the microemulsion system. The lower channel (low IT 3 content) ends in the middle of the phase diagram with equal amounts of water and oil, the upper channel begins with the L(3)-phase and passes all the way to the oil phase. Conductivity data show that the upper channel has a bi-continuous morphology up to 40% oil while the lower channel consists of oil droplets in water. In contrast to previous studies on nonionic systems, the two single phase channels are not connected and microemulsions with equal amount of oil and water do not have a bicontinuous structure.     

Aqueous two-phase system of an anionic gemini surfactant and a cationic conventional surfactant mixture

The aqueous two-phase system formed by the mixture of dodecyltrimethylammonium bromide (DTAB) with a gemini surfactant O,O′-bis(sodium 2-lauricate)-p-benzenediol (C₁₁pPHCNa) has been studied. Two two-phase regions were observed, one was a wide region in the cationic surfactant-rich side and the other in the vicinity of R = 1:1, where R is the mixing mole ratio of DTAB to C₁₁pPHCNa in global solution. Multi-lamellar vesicles are formed in the concentrated upper phase of cationic surfactant-rich systems and spherical aggregates in the concentrated bottom phase at R = 1:1. The microstructure of the solution and the phase behavior of the aqueous two-phase system strongly depended on the total concentration and the composition of the system.     

Molecular interactions of cationic and anionic surfactants in mixed monolayers and aggregates

The properties of anionic-rich and cationic-rich mixtures of CTAB (cetyltrimethylammonium bromide) and SDS (sodium dodecyl sulfate) were investigated with conductometry and surface tension measurements and by determining the surfactant NMR self-diffusion coefficients. The critical aggregate concentration (CAC), surface tension reduction effectiveness(gamma(CAC)), surface excess(Gamma(max)), and mean molecular surface area (A(min)) were determined from plots of the surface tension (gamma) as a function of the total surfactant concentration. The compositions of the adsorbed films (Z) and aggregates (chi) were estimated by using regular solution theory, and then the interaction parameters in the aggregates (beta) and the adsorbed film phases (beta(sigma)) were calculated. The results showed that the synergism between the surfactants enhances the formation of mixed aggregates and reduces the surface tension. Further, the nature and strength of the interaction between the surfactants in the mixtures were obtained by calculating the values of the following parameters: the interaction parameter, beta, the size parameter, rho, and the nonrandom mixing parameter, P*. These results indicate that in ionic surfactant mixtures the optimized packing parameter has the highest value and that the size parameter can be used to account for deviations from the predictions of regular solution theory. It was concluded that, for planar air/aqueous interfaces and aggregation systems, this nonideality increases as the temperature increases. This trend is attributed to the increased dehydration of the surfactant head groups that results from increases in temperature. Further, our conductometry measurements show that the counterion binding number of mixed micelles formed in mixtures with a high CTAB content is different to those with a high SDS content. This difference is due to either their different aggregation sizes or the different interactions between the head groups and the counterions.     

Atmospheric and electrochemical oxidation of ascorbic acid in anionic,nonionic and cationic surfactant systems

It is well known that the antioxidant activity of some species in homogenous solutions may not be the same as that in heterogeneous media. This environment dependence is the reason for investigating ascorbic acid antioxidant activity in surfactant solutions. In our study we have investigated the kinetics of atmospheric oxidation and electrochemical oxidation of ascorbic acid in aqueous solutions of the four surfactants: SDS, AOT (anionic), TRITON-100 (nonionic), and CTAB (cationic). For each surfactant the concentrations below and above CMC were investigated. As expected, a general trend in the atmospheric oxidation rate changes in the following manner: the micellar solution of nonionic surfactant shows a faster oxidation rate than that of the anionic surfactant, and the cationic surfactant an even higher one. The more subtle effects were observed with each surfactant concentration change. The influence of the surfactants on the electrochemical behavior of ascorbic acid was also studied. A general conclusion emerging from our investigation is that surfactants shift the ascorbic acid oxidation potential and change the peak current value. This phenomenon is due mainly to the surfactant film formed at the electrode/solution interface.     

混合表面活性剂双水相性质的研究

本文利用电导法及冷冻蚀刻实验技术研究了正负离子表面活性双水相上相中的液晶结构状态及其相关性质。在双水相相体积比一组成关系曲线上及上相电导率—组成曲线上,均存在明显的转折。转折处组成是有偏光现象的双水相与无偏光现象的双水相的分水岭,立方液晶导电能力与容纳水的能力强于层状液晶或六方液晶。冷冻蚀刻实验证实了无偏光现象的立方液晶的存在。本文对一些机理进行了讨论。     

Enthalpy and free energy of solubilization for 1-pentanol in anionic + cationic and anionic + nonionic surfactant mixtures

The standard enthalpy of solubilization as well as the partition coefficient of 1-Pentanol between micelles and water have been determined in the whole composition range of two binary surfactant systems from microcalorimetry experiments. The free energy results compare favorably with partition coefficients deduced from a head-space gas-chromatographic technique. It is shown that the surfactant mixing of sodium decylsulfate+decyltrimethylammonium bromide (system I) or sodium dodecylsulfate+dodecylpolyoxyethylene(23) (system II) is unfavorable to micellar solubilization. The solubilization of 1-pentanol is a highly endothermic process for system (I) and only slightly endothermic for system (II). The regular solution approximation predicts qualitatively the standard free energy as well as the standard enthalpy data. These results illustrate a discussion on the limits as well as the usefulness of the regular solution approach as applied to these three-component systems using available solubilization results from the literature for hydrophobic solutes in binary micellar surfactant solutions.     

Phase behavior and thermodynamics of a mixture of cationic gemini and anionic surfactant

We present the phase behavior and thermodynamics of the catanionic mixture of the gemini surfactant hexanediyl-alpha,omega-bis(dodecyldimethylammonium bromide), designated here as 12-6-12Br(2), and sodium dodecyl sulfate (SDS) over the full range of composition, at the water-rich corner. Visual and turbidity measurements of the mixtures provide some basic macroscopic information on phase behavior. The structure of the aggregates formed spontaneously in the mixtures has been observed with TEM. As the molar fraction of SDS, X(SDS), is increased, at constant total surfactant concentration, the aggregation morphologies change gradually from gemini-rich micelles, through multiphase regions containing a precipitate (catanionic surfactant) and a vesicle region, to SDS-rich micelles. From isothermal titration calorimetry measurements, the phase boundaries and corresponding enthalpy changes for phase transitions have been obtained. The formation of the different microstructures, in particular, the spontaneously formed vesicles in the SDS-rich side, is discussed on the basis of geometric and electrostatic effects occurring in the SDS-gemini mixture.     

Colloidal properties of binary mixtures of a nonionic surfactant and monomeric or gemini cationic surfactants

The behavior of binary mixtures composed of a nonionic surfactant Triton X-100 (TX-100) and monomeric dodecyltrimethylammonium bromide (DTAB) or gemini N,N’-bis(N-dodecyl-N,N-dimethyl)-1,2-diammonium ethane dibromide (DDAB) cationic surfactants is studied upon micellization, wetting of Teflon and adsorption at the solution-air and solution-Teflon interfaces. The compositions of mixed micelles and adsorption layers, as well as the parameters of interaction between the surfactants (mixture components), were calculated using the Rubingh-Rosen model. For both mixtures, the interaction parameters are negative, and their absolute values increase in the following order: mixed micelles ≈ adsorption layers at the solution-air interface < adsorption layers at the solution-Teflon interface. The absolute values of the interaction parameters for TX-100-DDAB mixtures are larger than those for TX-100-DTAB mixtures. The adsorption of both mixtures on Teflon demonstrates synergistic effects. In case of TX-100-DDAB mixtures, the synergistic effects are also observed upon micellization, reduction of the surface tension, and wetting of Teflon. Original Russian Text ? O.A. Soboleva, G.A. Badun, B.D. Summ, 2006, published in Kolloidnyi Zhurnal, 2006, Vol. 68, No. 2, pp. 255–263. Deceased.     

The miscibility of dodecyltrihydroxyethylammonium bromide with cationic, nonionic and anionic surfactants in mixed monolayers and micelles

In this paper were analyzed the surface properties of surfactants and the miscibility and interactions between components of adsorbed monolayers and micelles formed from mixed systems. The investigated compounds differ in the structure of the polar head and represented cationic (dodecyltrihydroxyethylammonium bromide—DTEAB, dodecyltrimethylammonium bromide DTMAB), anionic (sodium dodecyl sulfate—SDS), and nonionic (dodecyl-β-d-glucoside—DG) surfactant. The experiments were based on the measurements of the surface tension of the aqueous solutions of the investigated compounds and their mixtures (cationic/nonionic—DTEAB/DG, cationic/cationic—DTEAB/DTMAB and cationic/anionic—DTEAB/SDS). The composition of the mixed films and micelles as well as the free energies of mixing values, which are a measure of the molecular interactions, was calculated basing on the equations resulting from the Motomura theory. The obtained results indicate that all the investigated systems mix nonideally both in the monolayers and micelles. The magnitude of the deviations from ideal behavior is strongly dependent on the type of the investigated mixture and increases in the following order: DTEAB/DTMAB < DTEAB/DG  DTEAB/SDS.     

Spectrophotometric study of anionic azo-dye light yellow (X6G) interaction with surfactants and its micellar solubilization in cationic surfactant micelles

Solubilization and interaction of azo-dye light yellow (X6G) at/with cationic surfactants cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC) was investigated spectrophotometricaly. The effect of cationic micelles on solubilization of anionic azo dye in aqueous micellar solutions of cationic surfactants was studied at pH 7 and 25 degrees C. The binding of dye to micelles implied a bathochromic shift in dye absorption spectra that indicates dye-surfactant interaction. The results showed that the solubility of dye increased with increasing surfactant concentration, as a consequence of the association between the dye and the micelles. The binding constants, K(b), were obtained from experimental absorption spectra. By using pseudo-phase model, the partition coefficients between the bulk water and surfactant micelles, K(x), were calculated. Gibbs energies of binding and distribution of dye between the bulk water and surfactant micelles were estimated. The results show favorable solubilization of dye in CTAB micelles.     

The determination of cationic surfactants in the presence of anionic surfactant in biodegradation test liquors

A method is described for the determination of cationic surfactants in biodegradation test liquors and effluents containing anionic surfactant and other components which interfere with existing colorimetric procedures. The cationic surfactant is concentrated by evaporation of the aqueous sample and separated from the resulting residue by solvent extraction as an ion-association compound. The extract is treated under non-aqueous conditions on Bio-Rad AG 1-X2 resin in the chloride form to remove interfering anionic components. The isolated cationic surfactant is determined colorimetrically as its disulphine blue ion-association compound, extractable into chloroform. The recovery of added cationic surfactants from biodegradation test liquors is generally better than 95 %, and concentrations in the range 0.1–10 mg l^-1 can be determined. The method is suitable for biodegradability test studies where control liquors are available, e.g. OECD Screen and Confirmatory tests. In environmental samples, materials other than cationic surfactant may respond to disulphine blue and these limit severely the application of the procedure.     

Investigation of interactions between some anionic dyes and cationic surfactants by conductometric method

The interactions of cationic surfactants with anionic dyes were studied by conductometric method. Benzyltrimethylammonium chloride (BTMACl), benzyltriethylammonium chloride (BTEACl) and benzyltributylammonium chloride (BTBACl) were used as cationic surfactants and indigo carmine (IC) and amaranth (Amr) were chosen as anionic dyes. The specific conductance of dye–surfactant mixtures was measured at 25, 35 and 45 °C. A decrease in measured specific conductance values of dye–surfactant mixture was caused by the formation of non-conducting or less-conducting dye–surfactant complex. The equilibrium constants, K₁, the standard free energy changes, ΔG₁°$\mathrm{\Delta }{G}_1°$, the standard enthalpy changes, ΔH₁°$\mathrm{\Delta }{H}_1°$ and the standard entropy changes, ΔS₁°$\mathrm{\Delta }{S}_1°$ for the first association step of dye–surfactant complex formation were calculated by a theoretical model. The results showed that the equilibrium constants and the negative standard free energy change values for all systems decreased as temperature increased. Also these values decreased for all systems studied with increasing alkyl chains of surfactants due to the steric effect. When the equilibrium constant values, K₁, for the first association step of IC–surfactant and Amr–surfactant systems with the same surfactant were compared, the values of K₁ for IC–surfactant system were higher than that of Amr–surfactant system.     

Spectral studies of N-nonyl acridine orange in anionic, cationic and neutral surfactants

The spectroscopic and photophysical properties of N-nonyl acridine orange - a metachromatic dye useful as a mitochondrial probe in living cells - are reported in water and microheterogeneous media: anionic sodium dodecylsulfate (SDS), cationic cetyltrimethylammonium bromide (CTAB) and neutral octylophenylpolyoxyethylene ether (TX-100). The spectral changes of N-nonyl acridine orange were observed in the presence of varying amount of SDS, CTAB and TX-100 and indicated formation of a dye-surfactant complex. The spectral changes were also regarded to be caused by the incorporation of dye molecules to micelles. It was proved by calculated values K(b) and f in the following order: K(bTX-100)>K(bCTAB)>K(bSDS) and f(TX-100)>f(CTAB)>f(SDS). NAO binds to the micelle regardless the micellar charge. There are two types of interactions between NAO and micelles: hydrophobic and electrostatic. The hydrophobic interactions play a dominant role in binding of the dye to neutral TX-100. The unexpected fact of the binding NAO to cationic CTAB can be explained by a dominant role of hydrophobic interactions over electrostatic repulsion. Therefore, the affinity of NAO to CTAB is smaller than TX-100. Electrostatic interactions play an important role in binding of NAO to anionic micelles SDS. We observed a prolonged fluorescence lifetime after formation of the dye-surfactant complex tau(SDS)>tau(TX-100)>tau(CTAB)>tau(water), the dye being protected against water in this environment. TX-100 is found to stabilize the excited state of NAO which is more polar than the ground state. Spectroscopic and photophysical properties of NAO will be helpful for a better understanding of the nature of binding and distribution inside mammalian cells.