纳米银线可拉伸透明导电薄膜研究进展:材料、器件与应用

随着电子产品不断向可穿戴和便携式方向发展,在可拉伸基底上制备柔性电子器件引起了人们极大的兴趣.作为电子器件的重要部件之一,可拉伸透明导电薄膜成为重要的研究方向.传统的铟锡氧化物材料因其柔韧性差等问题不能在柔性器件中应用.纳米银线作为一种新型的一维纳米材料,不仅具备纳米材料的尺寸效应和较高的电导率,同时又赋予了可拉伸透明...     

柔性超级电容器电极材料与器件研究进展

超级电容器,也称电化学电容器,它具有比锂离子电池更高的功率密度和更长的循环寿命,与此同时,其能量密度也高于传统的电介质电容器,因此成为了一类具有很大应用前景的能量储存设备。随着人们对智能电子设备性能要求的提高,各类柔性可穿戴电子设备相继出现,柔性超级电容器作为一类便携式能量储存设备也受到了许多研究者的关注。在持续的研究中,二维平面结构的柔性超级电容器得到较大发展并日益成熟,与此同时,随着对柔性电子设备可穿戴性能要求的提高,一维纤维结构的柔性超级电容器应运而生,并且得到了初步发展。本文首先介绍了超级电容器的储能原理和重要性能的评估方法;接着,重点概述了二维平面结构和一维纤维结构两类柔性超级电容器器件结构和电极材料的研究进展;最后,总结了两类柔性超级电容器仍然存在并亟待解决的问题以及未来发展所面临的关键技术挑战,期望能为柔性超级电容器的研究提供参考和借鉴。     

柔性电池的最新研究进展

柔性电池作为新型柔性电子设备的关键部件,得到越来越多的关注.近年来,柔性锂离子电池取得了实质性的发展,并在卷曲式显示器、触摸屏、可穿戴动力传感器和可植入医疗装置等方面得到应用.本文主要介绍柔性锂离子电池的发展现状,分别从集流体、电极材料和电解质三部分进行阐述,特别介绍拉伸性能的实现途径,根据其不同的结构特点,可以分为波形结构、点阵互联结构、纺织结构、折纸结构和电缆式结构,并提出将柔性材料与新型结构相结合可以促进柔性电池发展.同时,也对其他柔性电池体系,如锂硫电池、燃料电池和太阳能电池等的最新发展进行简单概述.最后,对目前柔性电池的发展过程中存在的问题进行了总结,并对其未来的发展方向与面临的挑战进行展望.     

高分子导电水凝胶的制备及在柔性可穿戴电子设备中的应用

水凝胶是具有高含水量、可变形性和良好生物相容性的材料,其中导电水凝胶具有良好的导电性、可调节的机械性及自黏附性等特征,逐渐成为制备柔性可穿戴电子设备的最佳候选材料。近年来,具有生物相容性、机械柔韧性和抗疲劳性的导电水凝胶得到广泛研究,能够实现多种生理信号和物理信号的监测及传输,促进了柔性可穿戴电子设备的发展。柔性可穿戴电子设备逐渐成为人机交互技术和人工智能领域的主要研究方向。导电水凝胶通过使用导电聚合物、导电填料、自由离子及其混合物来合成,根据导电机理,所制备的导电水凝胶可分为电子导电水凝胶、离子导电水凝胶和混合电子-离子导电水凝胶。本文讨论了导电水凝胶的制备方法,总结了导电水凝胶在可拉伸性、导电性、生物相容性和自修复性等功能方面的研究进展及其在柔性可穿戴电子设备中的应用,期望导电水凝胶可以取得更好的发展。     

柔性可穿戴传感器件与储能器件的发展现状与挑战

随着人们生活质量与对可穿戴监测设备需求的提高以及物联网、人工智能和人机交互等科技水平的发展,能够对人体生命体征信号采集、转化与识别的可穿戴柔性电子装置成为连接智能生物与非智能机械装置的桥梁. 可穿戴柔性电子器件对人体生命体征信号的采集包括人体脉搏、温度、皮肤应变、呼吸和心跳等指标. 本文总结概述了近年来可穿戴柔性传感器对人体生命信号采集的现状以及存在的问题和挑战,并对可穿戴柔性供能器件做了简要的总结和展望.     

基于高黏附可拉伸高分子材料的人机交互界面

随着柔性电子技术和人工智能的蓬勃发展, 将柔性传感器与人工智能、 大数据和5G通讯有机结合, 能够构建以人为中心的智能人机交互系统, 在智能健康监测和生物医疗等领域发挥越来越重要的作用. 作为连接人体信号与网络空间的人机交互界面, 皮肤电极的力学性能直接影响监测信号的灵敏度和稳定性. 从材料的角度出发, 如何同时实现电极的可拉伸性和高黏附性, 让其稳定地贴敷于皮肤表面, 成为皮肤电极进一步应用亟待解决的科学难题和技术挑战. 本文综合评述了近年来高黏附可拉伸高分子材料的研究进展及在人机交互界面的各种应用, 并展望了下一代智能人机交互界面的发展趋势.     

纳米碳材料在可穿戴柔性导电材料中的应用研究进展

可穿戴设备的兴起使得对柔性器件的需求日益提高,柔性导电材料作为可穿戴器件的重要组成部分而成为研究的热点。传统的电极材料主要是金属,因金属材料本身不具有柔性,一般通过降低金属层厚度以及设计波纹结构等策略实现其在柔性器件中的应用,其加工程序复杂,成本较高。以碳纳米管和石墨烯为代表的纳米碳材料兼具良好的柔性和优异的导电性,且具有化学稳定、热稳定、光学透明性等优点,在柔性导电材料领域展现了极大的应用潜力。本文简要综述了近年来纳米碳材料在柔性导电材料领域的研究进展,首先介绍了碳纳米管基柔性导电材料,分别包括基于碳纳米管水平阵列、碳纳米管垂直阵列、碳纳米管薄膜、碳纳米管纤维的柔性导电材料;继而介绍了石墨烯基柔性导电材料,包括基于剥离法制备的石墨烯和化学气相沉积法制备的石墨烯以及石墨烯纤维基柔性导电材料;并简述了碳纳米管/石墨烯复合柔性导电材料;最后论述了纳米碳材料基柔性导电材料所面临的挑战并展望了其未来发展方向。     

基于仿生MXene纤维导电网络的柔性透明电极及电容传感器

为了开发具有优良性能的智能伪装隐身器件,使用预模板法制备了柔性透明电极.以叶脉纤维为预模板,在其表面沉积金属碳化物/氮化物（MXene）,从而开发了具有透明有序导电网络结构的透明电极.叶脉表面的羟基基团与导电材料的表面活性基团的相互作用极大地提高了导电材料与基底的表面结合力.此柔性透明电极在透光率为80.6%时,方阻为11.4Ω/sq,有效地避免了光电特性之间的“权衡”效应,且在1000次弯曲循环下电阻几乎保持不变,具备良好的耐久性和稳定性.将此透明电极成功制备透明电容式传感器,其灵敏度可达0.09 kPa^-1,且在1000次循环之后相对电容基本保持不变,具有出色的传感性能和耐久性,可以在人难以察觉的状态下监测人体运动信号.此柔性透明电极和透明电容传感器在可穿戴伪装电子领域具有巨大潜力.     

基于印刷电子的透明导电薄膜研究进展

透明导电薄膜是一种在可见光范围内透光率较高、导电性优良的薄膜材料.近年来随着智能手机、平板电脑等电子产品日益普及,透明导电薄膜受到越来越多的关注.本文分析了目前占据市场统治地位的掺锡氧化铟透明导电薄膜的缺点以及近年来国内外对透明导电薄膜开展的研究工作,总结了目前在印刷电子领域透明导电薄膜的主要研究方向,一方面是在传统金属氧化物薄膜基础上的改进;另一方面是寻找新型透明导电薄膜材料,并分别综述了各个研究方向的最新进展.     

新型柔性储能器件:柔性锂离子电池

柔性锂离子电池是一种新兴的锂离子电池，虽然与锂离子电池的工作原理相同，但使用柔性的集流体，因此展现出柔性，以及可弯折、可伸缩的特性，所以可以成为柔性/可穿戴器件的动力源。介绍了2种实现柔性锂离子电池的途径：一种是开发基于各种导电集流体（包括碳纳米管、石墨烯和碳布）的柔性锂离子电池；另一种是设计和构筑新型结构（包括电缆/电线型、透明型和可伸缩型）的柔性锂离子电池。     

Flexible,stretchable and conductive PVA/PEDOT:PSS composite hydrogels prepared by SIPN strategy

Stretchable conductive hydrogels have received significant attention due to their possibility of being utilized in wearable electronics and healthcare devices. In this work, a semi-interpenetrating polymer network (SIPN) strategy was employed to fabricate a set of flexible, stretchable and conductive composite hydrogels composed of polyvinyl alcohol (PVA) in the presence of glutaraldehyde as the crosslinker, HCl as the catalyst and poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) as the conductive medium. The results from FTIR, Raman, SEM and TGA indicate that a chemical crosslinking network and interactions of PVA and PEDOT:PSS exist in the SIPN hydrogels. The swelling ratio of hydrogels decreased with increasing content of PEDOT:PSS. Due to the chemical crosslinking network and interactions of PVA and PEDOT:PSS, PVA networks semi-interpenetrated with PEDOT:PSS exhibited excellent tensile and compression properties. The tensile strength and elongation at breakage of the composite hydrogels with 0.14 wt% PEDOT:PSS were 70 KPa and 239%, respectively. The compression stress of the composite hydrogels with 0.14 wt% PEDOT:PSS at a strain of 50% was about 216 KPa. The electrical conductivity of the hydrogels increased with increasing PEDOT:PSS content. The flexible, stretchable and conductive properties endow the composite hydrogel sensor with a superior gauge factor of up to 4.4 (strain: 100%). Coupling the strain sensing capability to the flexibility, good mechanical properties and high electrical conductivity, we consider that the designed PVA/PEDOT:PSS composite hydrogels have promising applications in wearable devices, such as flexible electronic skin and sensitive strain sensors.     

Highly conductive PEDOT/PSS microfibers fabricated by wet-spinning and dip-treatment in ethylene glycol

Highly conductive microfibers made of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS) were fabricated by wet-spinning and subsequent dip-treatment in ethylene glycol. The electrical conductivity of the PEDOT/PSS microfibers with a diameter of ca. 5 μm was significantly increased from 74 S cm⁻¹ to 467 S cm⁻¹ by the dip-treatment in 3 min. The result was explained by removal of insulating PSS from the surface of the PEDOT/PSS grains and crystallization of PEDOT, which led to the formation of large numbers of higher conductive grains that enhanced the transport of charge carriers in the microfiber. The mechanical properties of the microfibers were also improved by the dip-treatment where Young’s modulus and tensile strength increased from 3.2 GPa and 94 MPa to 4.0 GPa and 130 MPa, respectively.     

Enhanced electrical properties of PEDOT:PSS via synergistic effect

As a representing conducting polymer, poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) has been widely employed in organic electronics. However, the electrical conductivity for pristine PEDOT:PSS is only between 0.1 and 0.5 S/cm. In order to enhance the conductivity, the silver nanowires (Ag NWs) were synthesized to dope PEDOT:PSS. It was found the electrical conductivity of PEDOT:PSS was improved to about 200 S/cm with Ag NWs. When double-wall carbon nanotube (DWCNT) was employed together with Ag NWs, the electrical conductivity was further improved to over 2800 S/cm. We proposed the synergistic working model between Ag NWs and CNTs for such enhancement. In this work, UV-vis-NIR spectra and SEM images were also employed to investigate the mechanism of electrical conductivity enhancement.     

Highly enhanced thermoelectric performance of WS2 nanosheets upon embedding PEDOT:PSS

Two‐dimensional (2D) WS₂ nanosheets (NSs) as a promising thermoelectric (TE) material have gained great concern recently. The low electrical conductivity significantly limits its further development. Herein, we reported an effective method to enhance the TE performance of WS₂ NSs by combining poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate) (PEDOT:PSS). The restacked WS₂ NSs thin film with 1T phase structure obtained by a common chemical lithium intercalation show a high Seebeck coefficient of 98 μV K^?1 and a poor electrical conductivity of 12.5 S cm^?1. The introduction of PEDOT:PSS with different contents obviously improve the electrical conductivity of WS₂ NSs thin films. Although a declining Seebeck coefficient was observed, an optimized TE power factor of 45.2 μW m^?1 k^?1 was achieved for WS₂/PEDOT:PSS composite thin film. Moreover, the as‐prepared WS₂/PEDOT:PSS thin film can be easily peeled off and transferred to other substrate leading to a more promising application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 997–1004     

石墨烯基纤维储能器件的研究进展与展望

随着小型化、可穿戴等特征的智能电子以及物联网传感设备的发展,新型纤维状柔性化、小型化电化学储能器件已成为重要的研究方向。同时,对纤维材料和柔性储能器件的性能提出了更高的要求,如可任意弯折、可拉伸、可折叠、高储能密度等。石墨烯纤维具有独特的结构、优异的导电性、良好机械性能和电化学性质,已证明了是一种极具前景、高性能的新型纤维状柔性储能材料。目前,研究者已开发了多种石墨烯基纤维微观结构的调控策略来进一步改进其性能。本文首先系统总结了石墨烯基纤维的制备方法和其性能提升的策略,然后详细讨论其在柔性化纤维状超级电容器、金属离子电池、热电发电机、太阳能电池和相变材料等储能领域中的最新应用进展。最后,对石墨烯基纤维在能源存储和转换领域中存在的挑战和机会进行了展望。     

Role of Layer-by-Layer Deposition on Electrical and Optical Properties of PEDOT: PSS/Polyaniline Thin Films for Solar Cells

In this article, electrical and optical properties of PEDOT:PSS/Polyaniline: (PANI)bilayer thin films deposited on indium tin oxide (ITO) are reported. Spin coater has been used for fabrication of thin films of 40–50 nm thickness at 5000 rpm. The deposited thin films have been characterized by using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), UV-vis spectroscopy and Keithley electrometer. Layer-by-layer (LBL) technique has been shown to produce electroactive polymer films with low roughness, excellent uniformity, and high electrical conductivity for heterojunction solar cells. The electrical response of fabricated films showing ohmic behavior for PEDOT: PSS/PANI thin films.     

Recent Advances in Flexible Perovskite Solar Cells: Fabrication and Applications

Flexible perovskite solar cells have attracted widespread research effort because of their potential in portable electronics. The efficiency has exceeded 18 % owing to the high‐quality perovskite film achieved by various low‐temperature fabrication methods and matching of the interface and electrode materials. This Review focuses on recent progress in flexible perovskite solar cells concerning low‐temperature fabrication methods to improve the properties of perovskite films, such as full coverage, uniform morphology, and good crystallinity; demonstrated interface layers used in flexible perovskite solar cells, considering key figures‐of‐merit such as high transmittance, high carrier mobility, suitable band gap, and easy fabrication via low‐temperature methods; flexible transparent electrode materials developed to enhance the mechanical stability of the devices; mechanical and long‐term environmental stability; an outlook of flexible perovskite solar cells in portable electronic devices; and perspectives of commercialization for flexible perovskite solar cells based on cost.     

Influence of imidazole‐based acidity control of PEDOT:PSS on its electrical properties and environmental stability

Poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has been studied for a wide range of applications due to its potential as a transparent electrode. Herein, the use of imidazole and its derivatives as a neutralizing additive for PEDOT:PSS dispersion and in‐depth studies of their effects in terms of electrical properties and stability is reported. Although the neutralization in general reduces the electrical conductivity of PEDOT:PSS, the conductivity after imidazole treatment (685.2 S cm^?1) is higher than that after treatment of other derivatives. Spectroscopic and thermoelectric studies show that the de‐doping effect resulted in the conductivity reduction. As a trade‐off of the conductivity reduction, greatly enhanced long‐term stability and noncorrosive characteristics are obtained after neutralization. The change in sheet resistance of imidazole‐treated PEDOT:PSS after 500 h under harsh conditions (85 °C and 85% humidity) is half that of the untreated samples, demonstrating the great enhancement of the stability. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1530–1536     

导电高分子PEDOT/PSS保护银纳米颗粒的制备与表征

利用导电高分子聚(3,4-二氧乙基噻吩)/聚(对苯乙烯磺酸)(PEDOT/PSS)作保护剂,制备了银纳米颗粒,用UV-Vis和TEM对其进行了表征.结果表明,选择合适量的PEDOT/PSS保护剂可以得到大小分布较窄银纳米颗粒.