具有高气态碘吸附的二维介孔共价有机框架

合成了一种新型的二维介孔共价有机框架(COF)材料JUC-573. 粉末X射线衍射、 氮气吸附-脱附和热重等表征结果表明合成的COF材料具有高结晶度、 高比表面积以及良好的热稳定性. 在333 K、 常压条件下, 该材料表现出优异的碘吸附能力, 且吸附量高达4.15 g/g. 这是由于在JUC-573中规则定向的垂直一维介孔孔道能够有效地避免碘吸附后的堵塞, 从而优化了材料的吸附能力. JUC-573可多次循环用于气态碘的捕获且保持几乎不变的吸附量.     

一种高比表面积共价有机框架材料的合成及药物缓释性能

合成了一种具有较高比表面积(S_BET=1804 m ²/g)的新型二维共价有机框架(COF)材料(JUC-516), 并将其应用于模拟人体体液(SBF)中模拟动物体内的药物缓释, 取得了较理想的效果. 通过Materials Studio模拟、 粉末X射线衍射(PXRD)、 N₂吸附-脱附分析、 扫描电子显微镜(SEM)及傅里叶变换红外光谱(FTIR)等方法表征了所得COF材料的结构, 证实JUC-516是一种基于AA堆积hcb拓扑、 具有高结晶度和球状形貌的共价有机框架材料.     

偶氮苯功能化的光响应共价有机框架材料

通过后修饰的方法, 在共价有机框架(COFs)材料JUC-500的孔道中引入光敏性的偶氮苯小分子, 合成了具有光热刺激响应的共价有机框架材料JUC-501. 在紫外线和加热作用下, 孔道中的偶氮苯会发生可逆的顺-反异构变化, 对染料污染物甲基橙(MO)表现出优异的可逆吸附与释放性能.     

基于四硫富瓦烯的无金属共价有机框架材料用于高效电催化析氧反应

共价有机框架(COFs)在电催化析氧反应(OER)中的应用得到了广泛的关注。然而,大多数无金属共价有机框架(COFs)的导电性较差,不利于OER反应。四硫富瓦烯(TTF)是一种良好的电子供体,具有快速的电子转移能力,将TTF整合到共价有机框架骨架中将有助于电子的转移。在此,我们报道了一种基于四硫富瓦烯的二维无金属共价有机框架材料,JUC-630。与不含四硫富瓦烯的同类材料(Etta-Td COF)相比,JUC-630具有较低的过电位(400 mV)和塔菲尔斜率(104 mV∙dec⁻¹)。本研究提出了合理设计功能基元的策略,这有助于大大提高COF材料的OER催化活性。     

一种新型磺酸修饰的共价有机框架用于二氧化碳吸收和染料吸附

环境污染是地球现今的重要问题之一,而其中就包括水污染与温室效应.共价有机框架(covalent organic frame-works,COFs)作为一种新兴的晶态多孔聚合物,因其优异的吸附性能,在污染治理领域具有广阔的应用前景.本工作报道了一种基于β-酮胺单体通过迈克尔加成-消除反应合成的磺酸型微孔COF (JUC-...     

磁性共价有机框架材料吸附甲基橙和茜素绿两种阴离子有机染料

以自制的磁性共价有机框架材料(COF)为吸附剂,采用静态吸附法研究了其对甲基橙(MO)和茜素绿(AG-25)的吸附行为。 结果表明,在25 ℃,pH值6~8的条件下,磁性COF对两种阴离子染料的的吸附量分别为997和1314 mg/g。 两种染料的吸附等温线符合Langmuir等温吸附模型,表明吸附过程为单层吸附;吸附动力学均符合准二级动力学模型,说明吸附过程以化学吸附为主。 磁性COF对水体中的阴离子染料体现出高吸附量和快速吸附的特点,具有潜在的价值。     

阳离子共价有机框架对水中非甾体药物的强化去除

以三醛基间苯三酚(TFP)和溴化乙锭(EB)为单体, 在溶剂热条件下合成了一种二维β-酮烯胺类阳离子型共价有机框架(COF)材料. 所得TFP-EB COF呈现出良好的结晶度、 高的比表面积和丰富的溴化乙锭单元, 故可将其应用于水中非甾体抗炎药(NSAIDs)的去除.阳离子TFP-EB COF对双氯芬酸钠(DCF-S)和对氨基水杨酸钠(PAS-S)两种非甾体抗炎药表现出高的吸附能力和快的吸附动力学, 其饱和吸附容量分别可达350.4和145.3 mg/g. 而采用TFP与4,4'-二氨基联苯(BND)在类似条件下合成的中性TFP-BND COF则表现出较差的吸附性能, 其对DCF-S和PAS-S的饱和吸附容量分别仅有59.7和13.6 mg/g. TFP-EB COF的吸附性能比TFP-BND COF更优异, 这主要归因于TFP-EB COF孔道中存在的大量阳离子EB单元与NSAIDs中的羧基间存在强烈的静电作用. 此外, 竞争离子干扰和循环再生实验表明阳离子型TFP-EB COF在NSAIDs污染物的去除方面具有良好的应用前景.     

共价有机骨架的设计、制备及应用

共价有机骨架(COF)材料是一类由共价键连接有机构筑单元而形成的结晶型有机多孔材料。COF因其长程有序的结晶结构,以及具有可设计性、可剪裁性和易功能化的特点,因而表现出优异的物理化学性质,被科学家们广泛关注和研究。基于COF材料特定的拓扑结构、多样的单元组成、可调的孔道性质和灵活的功能开发,COF材料在气体存储、非均相催化、传感检测、光电转换、质子传导、储能等方面体现出重要的应用价值。本文从COF材料的设计、制备以及应用等方面,综述了COF材料领域的发展和现状,并对其研究和应用前景进行展望。     

共价有机骨架的设计、制备及应用

共价有机骨架(COF)材料是一类由共价键连接有机构筑单元而形成的结晶型有机多孔材料。COF因其长程有序的结晶结构,以及可设计性、可剪裁性和易功能化的特点,表现出优异的物理化学性质,赢得了科学家们的广泛关注和研究。基于COF材料特定的拓扑结构、多样的单元组成、可调的孔道性质和灵活的功能开发,COF材料在气体存储、非均相催化、传感检测、光电转换、质子传导、储能等方面体现出重要的应用价值。本文从COF材料的设计、制备以及应用等方面,综述COF材料领域的发展和现状,并对其研究和应用前景进行展望。     

离子型共价有机框架材料的制备及对染料吸附性能的研究

茜素红(Alizarin Red,AR)作为蒽醌类染料中的重要组成,由于其具有优异的特性,在染料和酸碱指示剂等方面被广泛使用。但是AR具有毒性高、结构复杂以及化学需氧量(COD)值大等原因,使其成为了主要污染物之一,去除水体中的茜素红染料污染物已经成为了目前亟待解决的问题。共价有机框架材料作为一种新型的多孔有机材料,由于其具有比表面积大,孔径均一和可设计的独特优势,已经广泛应用吸附和分离等方面。因此,以三醛基间苯三酚和溴化乙锭为构筑单元,通过水热的方法合成一种二维离子型共价有机框架材料(TpEB-COF)。对制备的TpEB-COF进行相关表征,包括X射线衍射仪(XRD),扫描电镜(SEM)和能量色散谱仪(EDS)等。然后将制备的TpEB-COF作为固体吸附剂,将其应用对水中AR的吸附,研究了不同吸附时间和不同pH值对吸附过程的影响。实验结果证明制备的离子型共价有机框架材料具有良好的晶型结构。同时,对实验数据分析表明,离子型共价有机框架材料对于茜素红的吸附符合准二级动力学方程和Langmuir吸附模型,吸附效率为82.8%,最大吸附量为828 mg g-1。本研究不仅为共价有机框架材料的设计和合成奠定坚实的基础,而且拓展了离子型共价有机框架材料的应用范围,促进共价有机框架材料的发展。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.