铱催化的MBH乙酸酯与吲哚酮类化合物的烯丙基化反应

研究了一种新的铱催化的Morita-Baylis-Hillman(MBH)乙酸酯与3-苯基取代的吲哚酮的烯丙基烷基化反应,发现铱催化的区域选择明显不同于钯催化的反应,直接、高效地合成了一类未见报道的具有新结构的3,3-二取代的吲哚酮类化合物.通过对亚磷酰胺、双膦及单膦等配体、金属源、溶剂、碱以及反应温度的筛选,获得了适合该反应的催化体系及最优条件:以[Ir(COD)Cl]₂(摩尔分数5%)和亚磷酰胺配体(L6,摩尔分数10%)为催化剂, CH₃CN为溶剂, Cs₂CO₃为碱,于-30℃反应25 h.在最优条件下,对不同类型取代基的底物进行了考察,发现底物普适性良好,产率最低为84%,最高可达98%.同时还发现,底物取代基的电性对反应产率影响不大,一些其它类型的双膦和单膦配体对催化反应也有较好的催化效果.     

理论研究二米基硼B(Mes)2位置异构对Ir(III)配合物Ir(ppy)2(acac)的光物理性质的影响

采用DFT/TDDFT方法研究了二米基硼B（Mes）₂基团修饰的一类Ir（ppy）₂（acac）配合物1～3的光物理性质. 计算了电子结构,吸收和发射光谱以及自旋轨道耦合矩阵< T₁^α|H_SOC|S_n >和辐射跃迁速率（k_r）,探讨了取代基位置不同对磷光辐射和非辐射跃迁性质的影响. 研究结果表明：向ppy配体的吡啶环引入B（Mes）₂基团,能够加强金属铱（Ir）与配体乙酰丙酮（acac）的相互作用,减小单-三重态能级差ΔE（S₁-T₁）,提高系间窜跃速率和磷光辐射跃迁速率. 向ppy配体的苯环引入B（Mes）₂基团则增大了S₀与T₁的结构变形和自旋轨道耦合矩阵< S₀|H_SOC|T₁ >,使非辐射跃迁速率增加. B（Mes）₂基团位置异构,导致金属d轨道分裂方式不同,其在三个方向的自旋轨道耦合作用不同,辐射跃迁和非辐射跃迁都随之改变. 从理论上解释了通过对ppy配体的吡啶环修饰可获得高磷光量子产率的原因.     

新型手性膦噁唑啉铱络合物的合成及其在氢化反应中的应用

在鹰爪碱诱导下,2-氯甲基-4,4-二甲基噁唑啉与叔丁基苯基膦硼烷经络合反应,以43%的收率合成了光学纯度大于99%,手性中心在P上的新型手性噁唑啉氮膦配体(3); 3和铱配合物(［Ir(cod)Cl］₂)经络合反应以55%的收率制得两个新型手性膦噁唑啉铱络合物催化剂(1和2),其结构经¹H NMR, ¹³C NMR, ³¹P NMR和元素分析表征。考察了1和2对烯烃的不对称氢化反应的催化性能。结果表明：1具有较好的催化能力,收率＞92%,但催化剂的手性诱导能力较差(ee≤36%)。     

有机锡修饰的双吡唑甲烷及其与W(CO)5THF的反应

通过双吡唑甲基锂(LiCHPz₂)与有机锡卤化物(R₃SnX)的反应合成了一系列有机锡修饰的双吡唑甲烷配体(R₃SnCHPz₂).由于锡上取代基的不同,这些配体与W(CO)₅THF反应时表现出了不同的反应方式.三芳基锡修饰的双吡唑甲烷与W(CO)₅THF反应发生Sn-C(sp₃)键对W(0)中心的氧化加成;而三苄基锡修饰的双吡唑甲烷与其反应时仅给出羰基取代产物[Bz₃SnCHPz₂W(CO)₄].另外,二苯基苄基锡以及三(2-苯基-2-甲基丙基)锡修饰的双吡唑甲烷配体类似的反应导致配体的分解,产生单吡唑配体取代的羰基钨衍生物[W(CO)₅PzH]以及脱有机锡的双吡唑甲烷四羰基钨衍生物[CH₂Pz₂W(CO)₄].     

以苯基吡唑为主配体的Ir配合物电子结构和光谱性质的密度泛函理论研究

用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)的B3LYP方法对以苯基吡唑ppz为主配体的4种Ir配合物Ir(ppz)₃, Ir(ppz)₂(acac), Ir(ppz)₂(pic)和Ir(ppz)₂(dbm)的电子结构和光谱性质进行了理论研究. 计算结果表明, 辅助配体的改变对Ir配合物的最高占据轨道(HOMO)的影响不大, 但会显著的降低分子最低空轨道(LUMO)的能级, 从而调节Ir配合物的HOMO和LUMO间的能隙. 4种配合物对应的发射跃迁分别为Ir(ppz)₃:d(Ir)+π(ppz)→π*(ppz); Ir(ppz)₂(pic):d(Ir)+(ppz)→π*(pic); Ir(ppz)₂(acac), Ir(ppz)₂(dbm):d(Ir)+π(acacdbm)→π*(acacdbm). 金属配合物的发光颜色可以通过选择合适的辅助配体调节.     

二丁基锡磺酸酯催化酯交换合成碳酸二苯酯

研究了不同类型的酸催化剂对碳酸二甲酯与苯酚酯交换合成碳酸二苯酯的影响. 实验结果表明, 碳酸二甲酯与苯酚的酯交换反应是软碱(酚氧)亲硬酸(羰基碳)的反应; 硬Lewis酸比软Lewis酸、交界Lewis酸和Brönsted酸有更高的酯交换选择性. 将不同的磺基引入n-Bu₂SnO分子中, 制得一系列硬Lewis酸催化剂[n-Bu₂Sn(OH)OS(O)₂R(H₂O)]₂[R=p-NH₂C₆H₄(Ⅰ), p-CH₃C₆H₄(Ⅱ), C₆H₅(Ⅲ), p-ClC₆H₄(Ⅳ), Me(Ⅴ), CF₃(Ⅵ)]. 在酯交换反应中, 由于磺基的强吸电子效应增强了[n-Bu₂Sn(OH)OS(O)₂R(H₂O)]₂中Sn的Lewis酸性, 其催化活性比n-Bu₂SnO的高, 而且磺基上取代基的吸电子效应越强, 催化剂中Sn的Lewis酸性越强, 催化活性越高, 但取代基的吸电子效应过强会降低其对酯交换反应的选择性.     

Pd(OAc)2/Cu(OTf)2在离子液体BMImPF6中催化苯乙烯二聚反应的研究

在离子液体BMImPF₆中, 用不同的钯催化剂和Lewis酸三氟甲磺酸铜Cu(OTf)₂共催化苯乙烯二聚反应, 发现用Pd(OAc)₂/Cu(OTf)₂作催化剂, Pd/Cu物质的量之比为1～4时, 可高产率高选择性地获得苯乙烯二聚产物1,3-二苯基-1-丁烯. BMImPF₆对催化剂有较好的溶解性, 可固定催化剂体系, 使催化剂有效地与产品分离. 同时, α-甲基苯乙烯的二聚反应表明, 室温下不发生反应, 提高温度有利于反应进行.     

硅胶键合膦的制备及其对铑络合物催化1-辛烯氢甲酰化反应的影响

以硅胶为载体, 采用键合接枝法将2-(二苯膦基)乙基三乙氧基硅烷(DPPES)共价键合于硅胶表面, 制备了性能优良的硅胶键合型膦配体(以SiO₂(PPh₂)表示). 以SiO₂(PPh₂)为配体, Rh(acac)(CO)₂ (acac:乙酰丙酮)为催化前体, 负载铑膦络合物催化剂(SiO₂(PPh₂)/Rh)在1-辛烯氢甲酰化反应中原位生成. 对生成的负载型催化剂和硅胶键合型膦配体进行了傅里叶变换红外(FTIR)光谱表征, 考察了膦/铑摩尔浓度比([P]/[Rh])、温度等因素对铑催化的长链1-辛烯氢甲酰化反应的影响. 结果表明, 膦/铑摩尔浓度比的增加能显著提高反应的成醛选择性, 降低铑的流失. 在[P]/[Rh]=12、363 K、2.0 MPa、1.5 h 的温和反应条件下, 1-辛烯转化率和成醛选择性分别可达98.4%和95.3%, 其催化活性与DPPES或三苯基膦(TPP)作配体时的均相铑催化相近. 催化剂循环4 次后, 反应活性无明显下降, 1-辛烯转化率均在97.0%左右, 经电感耦合等离子体原子发射光谱(ICP-AES)检测,有机相中铑流失低于0.1%.     

疏水双功能介孔固体酸的合成及其在乙酸乙酯酯化反应中的应用

通过水热合成法一步合成了具有不同疏水基团－CH₃ 、－(CH₃)₂ 和－(CH₃)₃的双功能介孔固体酸SBA-15-SO₃H－(CH₃)_x催化剂。通过X射线粉末衍射(XRD)、N₂吸脱附、元素分析等方法对催化剂进行了表征,并在乙酸乙酯酯化反应中进行催化性能评价。结果表明,随着疏水前驱体中甲基数的增加,样品的疏水性增强。SBA-15-SO₃H-(CH₃)_x催化剂的催化活性随着疏水性的增强而提高,而具有较强疏水性的材料SBA-15-SO₃H-(CH₃)₃在反应中具有较高的催化性能。以SBA-15-SO₃H-(CH₃)₃为催化剂,酯化反应的最优条件为：温度为120℃,乙酸与乙醇摩尔比为4∶1,催化剂质量分数为1 %,反应时间为1h。在此条件下,乙醇的转化率和乙酸乙酯的选择性分别为93%和100%。     

手性双胺双膦-铱体系催化芳香酮的高对映选择性氢转移氢化

在异丙醇溶液中,从[Ir(COD)Cl]2和C2-对称的手性双胺双膦配体原位制备了手性能-Ir(Ⅰ)配合物,并直接用于催化几种芳香酮的不对称氢转移氢化。结果表明,该配合物是异丙基苯基酮不对称转移氢化的优秀催化剂,当底物酮与催化剂的摩尔比(S/C)为1200:1时,在室温下反应4h后,得到相应的手性芳香醇的转化率和对映选择性分别高达98%和98%ee.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.