共查询到20条相似文献,搜索用时 776 毫秒
1.
2.
3.
4.
本文以3-甲基-4-硝基氮氧化吡啶为起始原料,经两步反应合成5-氮杂吲哚。通过单因素实验法研究了温度、N,N-二甲基甲酰胺(DMF)、N,N-二甲基甲酰胺二甲缩醛(DMA)、铁粉等因素对反应的影响。较佳工艺条件下,产品按3-甲基-4-硝基吡啶氮氧化物计总收率为88.57%,较文献[1,2]提高了6%。通过熔点测定、1H NMR对最终产物进行了结构表征。此工艺的优点在于操作简单,反应时间短,成本低,收率高,适合于工业化生产。 相似文献
5.
6.
7.
以2-氯-3-硝基-5-溴吡啶为起始原料,经取代反应、水解反应、Suzuki偶联反应得到6-甲基-5-硝基-3-吡啶硼酸频哪酯。反应总收率为51%,中间体及目标产物结构由IR和1H-NMR表征。 相似文献
8.
9.
2-氨基-2-(2-甲氧基-5-吡啶)乙醇是一种重要的药物中间体。本论文提供一种以2-甲氧基吡啶-5-甲酸为原料,经过7步反应制备2-氨基-2-(2-甲氧基-5-吡啶)乙醇的方法,每步反应产率均高于78%,总收率约为23%,最终产品纯度大于98.5%。 相似文献
10.
4-溴-9-芴酮是一种重要的光电材料中间体要,目前合成方法均存在一些缺陷,难以规模化生产。本文以2,2′-二溴联苯,正丁基锂、碳酸二甲酯为原料,经过锂卤交换反应、亲核取代反应以及分子内环化反应得到目标化合物。通过对反应所需的溶剂、温度、时间和物料比等条件进行筛选,确定最佳反应条件为:以四氢呋喃为溶剂,锂卤交换反应温度为-90~-95℃,亲核取代反应温度为-85~-95℃,物料比为n(2,2′-二溴联苯)∶n(DMC)=1∶1.5,环化试剂为甲磺酸,环化反应温度为120℃。本文采用的合成方法简单,产物收率及纯度高,总收率达68.3%,HPLC纯度达到99.5%以上,适合工业化生产。产物结构经~1H NMR、~(13)C NMR和GC-MS确证。 相似文献
11.
Avadomide是处于Ⅱ期临床阶段用于治疗晚期实体瘤的潜在药物,本文对其合成工艺进行了研究,并对重要中间体的合成工艺进行了优化。以3-硝基邻苯二甲酰亚胺为起始原料,依次经开环、霍夫曼降解、环化、酯的氨解反应、氢氧化钯/碳加氢还原反应得到Avadomide,总收率为46.9%,产物结构经~1H NMR、~(13)C NMR和HRMS表征,纯度经HPLC检测为99.5%。优化后的工艺路线具有反应条件温和、后处理简单、产率高、可操作性强等特点,更适合Avadomide的工业化生产。 相似文献
12.
13.
在H3PO4存在下进行了2,3-二甲基-2-丁烯与乙酐的酰化反应,结果表明,H3PO4是室温下催化2,3-二甲基-2-丁烯与乙酐酰化反应的有效催化剂,在H3PO4存在下,酰化产物的收率主要取决于:(a)H3PO4的用量,(b)乙酐的用量;(c)反应温度和(d)反应时间,在适宜反应条件下,所得3,3,4-三甲基-4-戊烯-2-酮(TMP)约为99%,另外还发现,反应体系中加入少量乙酸,不会明显减少酰化产物的收率,乙酐的纯度,反应物的加入顺序对该反应几乎没有任何影响,在有和没有溶剂CH2Cl2的条件下所得酰化产物的收率是可比的。 相似文献
14.
以2,6,6-三甲基环己-2-烯-1,4-二酮为原料, 经选择性羰基保护、Wittig反应、脱保护基、 腈基水解和还原等5步反应合成了目标化合物, 总产率可达6.0%. 相似文献
15.
采用水热法制备了新型H6P2W9Mo9O62.24H2O催化剂,并用UV-Vis、FT-IR和TG-DTA等测试技术对催化剂进行了表征。以微波促进30%过氧化氢氧化环己酮制备己二酸合成反应为探针,考察了催化剂的催化性能。通过正交实验探讨了几种因素对反应的影响,确定了优化工艺条件为:n(环己酮)∶n(过氧化氢)∶n(草酸)∶n(催化剂)=100∶400∶1.25∶0.25,反应温度100℃,微波辐射功率400 W,反应时间3.5 h,己二酸产品的收率达87.33%,纯度可达99.7%。反应结束后,将反应后含催化剂的溶液浓缩至一定浓度,催化产率降低,重复使用5次收率降低为45.89%。 相似文献
16.
This study is an application of the experimental design methodology for optimizing a potassium sulfate synthesis reaction. The latter is a two‐stage reaction through an intermediate product (Schoenite: K2SO4.MgSO4·6H2O). To determine optimal experimental conditions of the first stage, we have conducted a fractional factorial design and a central composite one. The optimal conditions of the second stage were determined only by means of a fractional factorial design. Several physico‐chemical techniques were used to implement this study, namely potentiometry, complexometry, gravimetry and X‐ray diffraction. This work has showed that this double decomposition reaction, when performed under the determined optimal conditions, gives good quality potassium sulfate (purity more than 95%) with a maximal yield. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
17.
5-硝基-6-羟基-2-(对甲氧羰基苯基)苯并噁唑的合成 总被引:1,自引:0,他引:1
研究了以关键中间体4-氨基-6-硝基间苯二酚盐酸盐(ANR·HCl)和对苯二甲酸单甲酯(MTA)为原料,分别经酰氯化、缩合、环合分步或原位合成AB型新单体前体--4-(5-硝基-6-羟基-2-苯并噁唑基)苯甲酸甲酯(MNB)的技术。 反应优化条件:在甲基异丁基酮溶剂中,n(ANR·HCl)∶n(MTA)=1.00∶1.03,115 ℃缩合反应2.5 h;m(ANR·HCl)∶m(PPA)=1.00∶3.25的多聚磷酸(PPA),120 ℃环合8.5 h;MNB收率75.68%(以ANR·HCl计),HPLC测定ω(MNB)=96.32%。 产物结构经1H NMR和IR确证。 相似文献
18.
Acetals and ketals are a kind of the important compounds and used to protect carbonyl,middle material of the organic synthesis. What's more, they are a sort of the widely use flavor substance. 4-Methyl-2-isopropyl-1,3-dioxolane has fresh fruit odor and apple note. It is used to producing many sorts of essence. And the conventional method to synthesize 4-methyl-2-isopropyl-1,3-dioxolane makes use of sulfuric acid as catalyst in factories. But it causes many problems, such as the erosion of production equipment, difficulty after-treatment, low quality of the products, etc. HPA and its salts shows excellent catalytic activity to the esterification and have recently attracted much attention as catalysts for various industrial processes, because their acidic and redox properties can be controlled at atomic/molecular levels. Misono, Pope [1], and Wang [2]have reviewed the homogeneous catalysis and fine organic synthesis catalyzed by heteropoly compounds. However, there is no report on the synthesis of 4-methyl-2-isopropyl-1,3-dioxolane catalyzed by TiSiW12O40/TiO2. TiSiW12O40/TiO2 was prepared according to reference [3] and identified by means of IR and XRD. The reaction was carried out in a three-neck flask equipped with a stirrer, a reflux condenser, and a thermometer. A certain amounts of isobutyraldehyde,1,2-propanediol and the catalyst was heated to boiling and refluxed until no water flowed off. The purified product was analyzed by IR spectra and 1HNMR.In this paper, we report 4-methyl-2-isopropyl-1,3-dioxolane was synthesized from isobutyraldehyde and 1,2-propanediol in the presence of TiSiW12O40/TiO2. The factors influencing the yield of product and the optimum reaction conditions were discussed. The optimum conditions are molar ratio of isobutyraldehyde to 1,2-propanediol was 1:1.5, the quantity of catalyst was equal to 0.5% feed stock, and the reaction time was 1.0 h. TiSiW12O40/TiO2 was an excellent catalyst to synthesize 4-methyl-2-isopropyl-1,3-dioxolane and the yield can be up to 92.1%. IR spectra of 4-methyl-2-isopropyl- 1,3-dioxolane shows peaks at 1191,1100,1022,950 cm-1; 1HNMR (δH, ppm):4.65-4.67 (d, 1H, CH), 4.02-4.20 (m, 1H, CH), 3.81-3.92 (d, 1H, CH), 3.35-3.43 (t, 1H, CH),1.61~1.85 (m, 1H, CH), 1.14-1.29 (d, 3H, CH3), 0.96 (m, 6H, CH3); nD20=1.4135; b.p. 127-130 ℃.And we found that the catalyst can be utilized repeatedly, moreover, the catalytic activities of the catalyst are almost unchanged after it has been used five times. From the above results and discussion, we can see that the synthesis of 4-methyl-2-isopropyl-1,3-dioxolane catalyzed by TiSiW12O40/TiO2 instead of sulfuric acid has a great prospect of application. 相似文献
19.
20.
以三氟丙烯和溴为原料加成制得1,2-二溴三氟丙烷,脱溴化氢得到2-溴三氟丙烯,再在一定条件下合成2-溴三氟丙烯的格氏试剂(三氟异丙烯基溴化镁),与CO2反应最终生成1-溴-2-三氟甲基丙酸。 用碳酸钠溶液萃取的方法得到0.8 g产品,纯度为99.6%,收率为3.6%。 对产物进行了MS、IR、1H NMR和13C NMR等表征,并分析了主要副产物1,2-二氟丙二烯和2,3-二三氟甲基-1,3-丁二烯及其与未反应的2-溴三氟丙烯间的[2+2]或[2+4]环加成反应产物。 确定以2-溴三氟丙烯为原料经格氏反应制羧酸较好的反应条件为:以THF为溶剂,1,2-二溴乙烷作引发剂,制备格氏试剂温度为30 ℃,CO2与格氏试剂反应温度为0 ℃。 相似文献