聚芳酯树枝状分子接枝改性纳米二氧化硅

功能化改性二氧化硅广泛应用于色谱分离、异相催化、酶和蛋白质的固定及高分子复合材料等领域 [1] .通过改性 ,不仅可以使二氧化硅粉体的表面功能化 ,而且可以显著改善纳米二氧化硅在聚合物基体中的分散性和相容性 ,从而提高聚合物基纳米复合材料的综合性能 [2 ] .二氧化硅的表面改性主要涉及表面硅醇基的化学反应和接枝聚合反应 [1] ,所接枝的有机分子一般为线型结构 ,而具有规则枝化结构的树枝状分子近年来也受到了关注 [3～ 8] .Tsubokawa等 [3 ]用发散法将聚酰胺类树枝状高分子 (PAMAM)接枝到了纳米二氧化硅的表面 ,经改性后的产品在…     

PVDF基两性离子交换树脂的辐射合成及性能

以聚偏氟乙烯(PVDF)树脂为基材,采用共辐射接枝方法,在PVDF树脂上接枝苯乙烯(St)/甲基丙烯酸二甲氨基乙酯(DMAEMA)二元单体,随后对接枝产物进行磺化和质子化反应引入磺酸基和叔氨基正离子得到了一种新型的PVDF基两性离子交换树脂.红外光谱、X射线光电子能谱(XPS)、热重和扫描电镜(SEM)分析证明了辐射引发接枝共聚及功能化反应的成功进行.接枝反应条件如溶剂、剂量和二元单体浓度对接枝率(GY)有明显的影响.随着接枝率的增加,功能树脂的离子交换容量随之增大,但接枝链St与DMAEMA的摩尔比不变,其阳离子及阴离子交换容量最大分别可达2.16 mmol/g,1.06 mmol/g.     

端基功能化聚合物的表面性能

综述了端基功能化聚合物表面结构与性能的最新研究进展.聚合物端基功能化是实现聚合物表面改性的一种有效技术.通过端基功能化可以精确控制聚合物表面功能基团的种类和数量,从而影响聚合物表面的化学结构与性能.重点论述了功能化端基在聚合物表面的离析现象和产生这一现象的原因,以及功能化端基对聚合物表面分子运动能力的影响.本文还介绍了近年来用于研究端基功能化聚合物表面的表征新技术,如SFG、NR、SSIMS等.对端基功能化聚合物表面的环境响应性也进行了阐述.指出了利用不同功能化端基可以有效地控制聚合物表面的亲疏水性.并对端基功能化聚合物的应用进行了展望.     

聚4-乙烯基吡啶原位修饰PVDF膜及其负载磷钨杂多酸催化剂的研究

以聚偏氟乙烯(polyvinylidene fluoride,PVDF)微滤膜为基膜,4-乙烯基吡啶(4-vinylpyridine,4VP)为功能单体,采用表面引发电子活化再生原子转移自由基聚合(SI-AGET ATRP)法在基膜表面原位改性,并通过接枝聚合物侧链上的吡啶基团与Keggin型磷钨杂多酸(H3PW12O40·n H2O,HPW)之间的静电作用,制备了新型混合催化膜.实验结果表明,接枝聚合过程表现出"活性"/可控表面引发接枝聚合性质,基膜表面接枝聚合物量随聚合反应时间呈现线性增加,当反应时间为16 h,聚合物接枝量达到2.25 mg/cm2,聚合物接枝量的增多致使其相互堆积并坍塌,造成膜表面出现块状聚集体.然后,利用溴代十六烷对接枝聚合物进行季铵化改性,制得表面含有吡啶鎓盐的阳离子复合膜,通过接枝聚合物侧基中的吡啶和吡啶鎓盐基团与磷钨杂多酸之间的静电作用促使其在改性膜表面上有效负载.负载后的磷钨杂多酸均匀的分布在膜表面及孔道中,并保持其化学结构.负载催化剂前后膜的接触角从80.4°减小到57.8°,体现了亲水性催化剂的负载对膜表面润湿性的显著影响.     

氟碳端基聚合物合成及其表面吸附性能

综述了近十年来氟端基聚合物的合成,表征及其在表面吸附行为的研究成果。通过含有氟烷基的引发剂或终止剂在活性阴离子聚合反应或自由基聚合反应中使聚合物接上氟端基。已经成功地利用活性阴离子聚合反应合成了氟端基聚苯乙烯,通过含氟自由基引发烯类单体（如丙烯酸,乙烯硅等）可在相应聚合物链上引入氟端基,另外,聚合物的化学改性方法也可将氟基团接在聚合物链端（如氟基聚氧乙烯,氟端基聚合物具有的表面活性,当水溶液中或聚     

新型聚芳醚酮的研究进展

文章主要介绍了聚芳醚酮的合成路线与性质,讨论了对其改性的方向和进展,如共聚共混改性,在聚芳醚酮的主链中引入大的侧基破坏其规整性,以及研制含氟的新型聚合物。     

含氟两亲接枝共聚物的制备及其与牛血清蛋白作用的研究

用端基反应法合成了对乙烯基苄基的聚乙二醇大分子单体,将该大分子单体与甲基丙烯酸六氟丁酯共聚,合成了一种含氟两亲接枝共聚物.利用1H-NMR1、9F-NMR、GPC对大分子单体和两亲接枝共聚物进行了表征.表面张力法测定了两亲接枝共聚物的临界胶束浓度,发现随着共聚物中含氟链段含量的增加,其临界胶束浓度降低.采用荧光光谱研究了含氟两亲接枝共聚物与牛血清蛋白(BSA)的相互作用,结果表明由于含氟链段疏水力的作用,含氟两亲接枝共聚物能与牛血清蛋白发生相互作用使其荧光增强,随着含氟两亲接枝共聚物浓度和共聚物中含氟链段含量的增加,荧光增强幅度加大.通过透射电子显微镜(TEM)和激光光散射粒度仪(PCS)测试发现,当BSA加入到含氟两亲接枝共聚物的胶束溶液后,所得胶束的粒径和粒径分布变大,共聚物胶束由规整的实心核壳结构变为囊泡状核壳结构.     

含硅功能化聚烯烃:合成及应用

聚烯烃功能化改性是获得高性价比新材料的有效途径。含硅功能化聚烯烃(SFPO)是聚烯烃分子结构中含有机硅功能基团或有机硅聚合物链段的一类功能化聚烯烃的统称。由于有机硅功能基团及有机硅聚合物特殊的理化性质,SFPO通常具有丰富反应性或优异性能,成为一类有代表性的功能化聚烯烃。SFPO可以作为反应性中间体,用于制备具有复杂拓扑结构的功能化聚烯烃(如星型聚合物、梳型聚合物、接枝共聚物)或聚烯烃共价键接枝改性纳米材料;SFPO还可作为功能性添加剂(如增容剂、加工助剂,表面改性剂),用于开发聚烯烃新材料。近年来,研究人员在含硅功能化聚烯烃研究领域取得了系列进展,本文旨在对相关工作进行系统总结,以期引起同行注意并促进相关研究深入发展。     

可用于建材防水涂料的含氟聚氨酯的研制及性能研究

以聚醚二元醇和异氰酸酯合成两端含异氰酸酯基的聚氨酯预聚物,将含氟醇与聚氨酯预聚物进行反应,得到端基含氟的聚氨酯,制备了一系列含氟聚氨酯涂料。对涂料的性能研究显示,聚合物对基材具有良好的附着力,且随着含氟量的增大,制备的含氟聚氨酯涂层对水及乙二醇的接触角数值逐渐增大,表面能和吸水率逐渐降低;聚合物体系均一,未发生相分离。表明通过化学方法将含氟链段引入聚氨酯结构,得到了稳定的含氟聚氨酯聚合物,且涂料的表面性能得到提高。该含氟聚氨酯在建材防水涂料领域有广阔的应用前景。     

聚偏氟乙烯基含氟聚合物介电和储能研究进展

聚偏氟乙烯（PVDF）和偏氟乙烯（VDF）／三氟乙烯（TrFE）二元共聚物以其优异的铁电、压电性能而备受关注。近年来,该类聚合物经物理／化学改性后表现出非常优异的介电、储能性能,尤其在高储能放电电容器领域被寄予厚望。经分子组成优化和挤出拉伸处理的PVDF基含氟聚合物在室温下具有高介电常数（12～60）,高击穿电场强度,...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.