Effect of skin layer surface structures on the flux behaviour of RO membranes

The relationship between the surface structures of skin layers of crosslinked aromatic polyamide composite reverse osmosis (RO) membranes and their RO performances have been studied using two surface analytical techniques: SEM and AFM. As a result, it was found that RO membranes whose skin layer surface structures were rough produced high fluxes, and an approximately linear relationship existed between this surface roughness and RO membrane flux. Accordingly, skin layer surface unevenness of crosslinked aromatic polyamide composite RO membranes is regarded as an enlargement of the effective RO membrane area.     

Magnetic composites based on ultrafine polytetrafluoroethylene and cobalt containing nanoparticles

Composite materials based on ultrafine polytetrafluoroethylene and cobalt-containing nanoparticles were synthesized by the method of high-speed thermal decomposition of cobalt formate in a pseudoboiling layer of grains of ultrafine polytetrafluoroethylene. It has been found that ultrafine polytetrafluoroethylene is a composite material that consists of a core of polytetrafluoroethylene and a membrane of fluoroalkanes. In the formation of cobalt nanoparticles, interaction between them and the shell of ultrafine polytetrafluoroethylene-fluoroalkanes takes place. The result of the interaction is the formation of cobalt fluoride, which makes a significant contribution to the magnetic properties of composite materials. At room temperature, ferromagnetic behavior is characteristic for materials; the coercive force at 300 K is 700 Oe, while at 77 K it reaches 900 Oe.     

Development of urethane acrylate composite ion-exchange membranes and their electrochemical characterization

With the objective of introducing antifouling characteristics into interpolymer types of cation and anion exchange membranes, the surface of these membranes was coated with a 12-microm-thick urethane acrylate layer and was cured by UV radiation of wavelengths 308 and 172 nm under a complete inert atmosphere. Different urethane acrylate composite ion exchange membranes developed were characterized in NaCl solution by measuring their ion-exchange capacity, volume fraction of water, contact angle with water, membrane conductance, and membrane potential. It was found that the electrochemical transport properties of urethane acrylate composite cation-exchange membranes were increased due to resonance stabilization of the urethane group, which acts as a weak acid and dissociates as a negatively charged urethane ion and a positively charged proton. This contributes toward the net charge density of the membrane matrix responsible for enhanced selectivity and conductivity, while for urethane acrylate composite anion-exchange membranes reduction in net charge density was responsible for reduction in electrochemical transport properties. Counterion transport number, permselectivity, and counterion diffusion coefficient values for these membranes were also estimated. Experiments were also carried out in higher homologs of sodium carboxylate solutions in order to observe the fouling tendencies of these membranes. It was concluded that it is possible to obtain antifouling characteristics of ion-exchange membranes by coating and curing thin hydrophilic layers of urethane acrylate on their surfaces without sacrificing their electrochemical transport properties.     

Influence of rupture strength of interfacially polymerized thin-film structure on the performance of polyamide composite membranes

The permeation properties of a thin-film composite (TFC) membrane depend upon the material properties as well as the structural properties of the polymer forming the active layer. Membranes with the active layers prepared with 1,3,5-benzentricarbonyl chloride (TMC) and aliphatic diamines including dimethylenediamine (DMDA), 1,6-hexamethylenediamine (HMDA), and 1,9-nonamethylenediamine (NMDA) exhibit inferior performance compared to membranes with active layers composed of aromatic diamines including 1,3-benzendiamine (MPDA) and 1,4-benzendiamine (PPDA). It is also observed that the water flux for these membranes decreases as the length of the methylene chain increases due to decreasing hydrophilicity. Furthermore, because of the low rupture strength of the thin-films that form the active layer, the salt rejection also decreases with increasing methylene chain length. The membranes prepared with MPDA and various acyl chlorides including 1,6-hexamethylenedicarbonyl chloride (SC), 1,3-benzenedicarbonyl chloride (IPC), and 1,4-benzene dicarbonyl chloride (TPC) have low rupture strength and poor performance characteristics except for the membrane having network structure, TMC. It is observed that while hydrophilicity has a small effect on the permeation performance of the thin-films its effect of the rupture strength is large. Membranes with weak rupture strength evidence low salt rejection. Hence, the permeation performance of composite membranes with thin-films having weak mechanical strength at high operating pressures depends upon not only the physicochemical properties of the active material including the chemical properties, but also the mechanical strength of the polymer comprising the thin-film.     

Preparation of composite membranes by means of plasma polymerization of tiophene

The structure and the charge transport properties of poly(ethylene terephthalate) track membranes modified in a thiophene plasma were studied. It was found that polymer deposition on the surface of a track membrane via the plasma polymerization of thiophene results in composite membranes that, in the case of the formation of a semipermeable layer, exhibit conductivity asymmetry—rectifying effect—in electrolyte solutions. It was shown that chemical doping with iodine or photo-oxidation of the polymer layer produced in plasma leads to alteration in the electrochemical properties of plasma-modified membranes.     

PERVAPORATION PROPERTIES OF PDMS MEMBRANES CURED WITH DIFFERENT CROSS-LINKING REAGENTS FOR ETHANOL CONCENTRATION FROM AQUEOUS SOLUTIONS

Ethanol perm-selective PDMS/PVDF composite membranes were prepared by curing polydimethylsiloxane (PDMS) with various cross-linking reagents,such as tetraethoxylsilane(TEOS),γ-aminopropyltriethoxylsilane(APTEOS), phenyltrimethoxylsilane(PTMOS) and octyltrimethoxylsilane(OTMOS) as well.The cross-linking density and surface properties of the PDMS active layer were adjusted by varying cross-linking reagents.The pervaporation performance of PDMS membranes cured with different cross-linking reagents was inves...     

用流动电位法表征纳滤膜的结构及性能

利用测量流动电位的方法考察了纳滤膜的表面电学性能对纳滤膜的截留性能的影响.首先,采用不同功能层材料制备了复合纳滤(NF)膜,考察功能层的交联时间、单体结构等对表面电性能的影响,研究纳滤膜对不同无机盐的选择截留性能与表面电性能的关系.通过流动电位法测定纳滤膜的表面电学参数,如流动电位(ΔE)、zeta电位(ζ)和表面电荷密度(σd).实验表明,这些电学参数的变化与功能层交联时间和纳滤膜截留率的变化一致,在交联时间为45 s时,3种电学参数的绝对值均最大,而纳滤膜对无机盐的截留率也最大.复合纳滤膜zeta电位的绝对值(|ζ|)按照Na2SO4>MgSO4>MgCl2变化,同截留率的变化相同.带侧基单体交联后得到的纳滤膜的表面电性能参数的绝对值小于不带侧基单体的.因此,流动电位法可用于研究复合纳滤膜的截留机理和功能层结构.     

Preparation of composite hollow fiber membranes: co-extrusion of hydrophilic coatings onto porous hydrophobic support structures

Coating a layer onto a support membrane can serve as a means of surface functionalization of membranes. Frequently, this procedure is a two-step process. In this paper, we describe a concept of membrane preparation in which a coating layer forms in situ onto a support membrane in one step by a co-extrusion process. Our aim is to apply a thin ion exchange layer (sulfonated polyethersulfone, SPES) onto a polysulfone support. The mechanical stability and adhesion of the ion-exchange material to the hydrophobic support membrane (polysulfone) has been studied by a systematic approach of initial proof-of-principle experiments, followed by single layer and double-layer flat sheet casting. Critical parameters quantified by the latter experiments are translated into the co-extrusion spinning process. The composite hollow fiber membrane has low flux as a supported liquid membrane for the copper removal due to the low ion exchange capacity of the SPES. The coating layer of the composite membrane is porous as indicated by gas pair selectivity close to unity. However, our new composite membrane has good nanofiltration properties: it passes mono and bivalent inorganic salts but rejects larger charged organic molecules. The experimental work demonstrates that co-extrusion can be a viable process to continuously prepare surface tailored hollow fiber membranes in a one-step process, even if the support and coating material differ significantly in hydrophilicity.     

X‐ray action on polymeric membrane surfaces: a chemical and morphological characterization

The surfaces of six polymeric membranes—two polysulphone membranes, two composite reverse‐osmosis polyamide/polysulphone membranes having polyamide as the active layer and two activated membranes containing di‐2‐ethylhexylphosphoric acid and di‐2‐ethylhexyldithiophosphoric acid as carriers, respectively—have been characterized before and after irradiation with an x‐ray source, both chemically and topographically by XPS and atomic force microscopy (AFM), respectively. Changes in atomic concentrations of the characteristic elements of the membranes and in the shape of XPS spectra as a function of irradiation time can be related to chemical modifications on the membrane surface. The most significant changes have been observed for polysulphone, which is reduced by x‐ray action; this fact also shows the inhomogeneity of the surface of the di‐2‐ethylhexyldithiophosphoric‐activated membrane. In contrast, polyamide top layers of composite membranes have been shown to be the most stable. Chemical modifications are not related directly to changes in membrane roughness because for all membranes only small changes have been observed for AFM images recorded before and after membrane irradiation. Moreover, the roughness of both polysulphone membranes decreases slightly due to x‐ray radiation but increases slightly for all polyamide‐containing membranes (composite and activated membranes). Copyright © 2003 John Wiley & Sons, Ltd.     

Morphology and Transport Properties of Hybrid Materials Based on Perfluorinated Membranes,Polyaniline, and Platinum

The transport properties and morphological characteristics of perfluorinated membranes after deposition of the layer of platinum dispersion on the surface are studied. The significant effect of preliminary modification of perfluorinated membraned with polyaniline on the diffusion permittivity of the composite and the morphology of the layer of platinum dispersion is determined. Testing the composites as proton conductors with a catalytic layer on the surface in an air–hydrogen fuel cell has shown the effect of the asymmetry of the electrochemical characteristics of the membrane–electrode assembly at various orientations of the layer of platinum dispersion towards hydrogen and air flows. A higher catalytic activity of the composite membranes in the oxygen reduction reaction is determined in the case platinum dispersion is deposited onto the membrane preliminarily modified with polyaniline.

     

Pt/SiO2 as addition to multilayer SPSU/PTFE composite membrane for fuel cells

A multilayer composite membrane was prepared by reinforcing sulfonated polysulfone (SPSU) with porous polytetrafluoroethylene (PTFE), and adding Pt/SiO₂–Nafion® membranes on both sides of the SPSU/PTFE membrane to self‐humidify and protect the inside membrane. The ex situ Fenton test and open circuit voltage (OCV) accelerated test show that the composite membrane has better stability than the initial membrane because of the protection of the outside Pt/SiO₂–Nafion layers. The composite membrane has similar performance to that of NRE‐212 under the fully humidified condition and better performance than NRE‐212 without humidifying. The self‐humidifying membrane shows great potential for use in low humidifying conditions. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of bilayer composite nanomembranes with conductivity asymmetry

The structure and electrochemical properties of polyethylene terephthalate track membranes modified in acetylene plasma are studied. It is found that polymer deposition on the track membrane surface using acetylene polymerization in plasma results in the case of formation of a semipermeable layer covering pores in formation of a composite nanomembrane featuring asymmetry of conductivity in solutions of electrolytes: a rectifying effect similar to that of a p-n junction in semiconductors. It is shown that the observed effect of conductivity asymmetry is caused by a significant decrease in the diameter of pores in the plasma-deposited polymer layer and a change in the pore geometry, same as existence of an interface between the initial membrane and polymer layer that have a different concentration of carboxyl groups in the surface layer. The impedance spectroscopy method allowed obtaining information on ion transfer in the studied membranes.     

修饰晶种法合成MFI型分子筛膜包覆的活性炭颗粒

由于分子筛膜的分离和催化作用, 分子筛膜包覆的传统催化剂颗粒可以实现高效的催化过程. 活性炭颗粒作为一种常用的催化剂载体, 由于其表面的憎水性和不平整, 在不规则活性炭颗粒表面直接水热合成包覆一层分子筛膜非常困难. 为了克服上述缺点, 本文采用一种勃姆石凝胶修饰的晶种法在活性炭颗粒表面合成连续的分子筛膜. 以勃姆石溶胶为前驱体, 在活性炭颗粒表面通过喷涂预先形成一层相对平整的勃姆石凝胶层以改善活性炭表面. 在随后的晶种涂覆过程中, 晶种分散液加入部分勃姆石溶胶为胶粘剂, 所得的晶种层覆盖载体完全, 与载体结合牢固, 无需焙烧处理. 将晶种涂覆后颗粒在旋转动态水热175℃处理6 h, 得到分子筛膜包覆的活性炭颗粒, 所得材料分别用X射线衍射和扫描电镜进行表征. 包覆的分子筛膜为MFI 结构, 厚度约为5μm. 对比实验表明, 没有勃姆石溶胶修饰的活性炭颗粒上不能成膜. 这种勃姆石凝胶修饰晶种法为在各种惰性载体上合成分子筛膜提供了便捷的方法.     

Pervaporation separation of water/alcohol mixtures using composite membranes based on polyelectrolyte multilayer assemblies

Composite pervaporation membranes composed of an asymmetric polyamide-6 membrane and an ultrathin self-assembled polyelectrolyte separating layer are described. The supporting membrane was prepared from both an unmodified polyamide-6 and a comb-like polymer with carboxyl terminated polyamide-6 side chains. A high end group concentration was found to be advantageous for sufficient adhesion of the multilayer systems on the supports. Up to 20 layers were deposited onto the membrane surface by dipping the membranes in aqueous solutions containing oppositely charged polyelectrolytes. The polyanions used were poly(acrylic acid), poly(styrene sulfonic acid) and alginic acid. The polycations used were poly(diallyldimethylammoniumchloride), chitosan and poly(ethylenimine). Performance of these membranes depends strongly on the layer number and on the type of polyelectrolytes. In general, membranes modified with two weak polyelectrolytes of high charge density gave the best separation properties while those modified with strong polyelectrolytes of low charge density led to poorer separation properties. However, the highest separation factor (≥10,000) for a water/2-propanol mixture (12/88 w/w) at permeate flux of 300 g/m²h was obtained with six double layers consisting of poly(ethylenimine) and alginic acid. These composite membranes were stable over an operating period of at least 400 h.     

Electrotransport properties and morphology of MF-4SK membranes after surface modification with polyaniline

The method of template synthesis is used for the surface modification of MF-4SK membranes with polyaniline. The influence of the time of polyaniline synthesis in the surface layer of a perfluorinated MF-4SK membrane on its morphology and electrotransport properties is investigated. It is established that under the synthesis conditions, a gradient distribution of polyaniline develops across the thickness of the membrane, and as a result of this, an anisotropic composite structure is formed. It is shown that the specific electrical conductivity and the electroosmotic and diffusion permeability exhibit an extremal character as functions of the time of polyaniline synthesis. When the orientation of these composite membranes is changed with respect to electrolyte flow, an asymmetry effect in their diffusion characteristics is found. With the application of the bilayer fine porous membrane model, the modified-layer thickness is estimated, and the determining influence of the difference in absolute values of effective fixed-charge volume densities on the development of the asymmetry effect is found.     

Supported liquid membranes modification with sulphonated poly(ether ether ketone): Permeability,selectivity and stability

The development of a new type of composite membrane consisting of a microfiltration support membrane, an immobilised liquid membrane phase and a hydrophilic, charged polymer layer and its function as a supported liquid membrane (SLM) for copper selective transport are described. The ion-exchange layers function as stabilisation layers to improve the membrane lifetime and consist of sulphonated poly(ether ether ketone) (SPEEK). This polymer shows a high permeability for copper ions due to the presence of fixed negative charges and to its swelling capacity in an aqueous phase.A method was developed to prepare composite membranes composed of the support membranes Celgard with one stabilisation layer on either the feed or strip side of the membrane or on both sides. Good adhesion of homogeneous, negatively charged, hydrophilic SPEEK layers to the hydrophobic macroporous support membranes could only be established when the support membranes were first hydrophilised with a concentrated sulphuric acid solution containing 5 wt% free SO₃.The lifetime of the SLMs is significantly improved when one stabilisation layer is applied at the strip side or two layers at both sides of the SLM. A second advantage of this composite SLM is the increase in copper flux caused by a decrease in thickness of liquid membrane phase. However, when SPEEK penetrates entirely through some pores of the support membrane, ions diffuse non-specifically through the SPEEK matrix resulting in an undesired selectivity loss. This phenomenon occurs only when thin Celgard membranes are used as support membranes.     

Mathematical simulation of atomic hydrogen diffusion transfer through a multilayer metal membrane at finite pressures

Diffusion transfer of atomic hydrogen through multilayer metal membranes has been studied within the lattice model of an ideal gas, with the transfer being described by a set of nonlinear algebraic equations. It has been shown that, for multilayer membranes composed of less than four layers, an analytical expression describing a diffusion flux can be derived. Atomic hydrogen transfer through a membrane consisting of a vanadium layer, the surfaces of which are coated with palladium films, has been analyzed in detail. It has been found that the value of the flux may depend on the transfer direction. The effect of diffusion asymmetry arises at finite pressures of hydrogen on the outer membrane surfaces, when its dissolution in metals is described by nonlinear sorption isotherms. The degree of the diffusion asymmetry increases with a rise in hydrogen pressure and depends on the arrangement of the layers composing a membrane.     

Chitosan-based solid electrolyte composite membranes: I. Preparation and characterization

Some chitosan-based solid electrolyte composite membranes were prepared by incorporating potassium hydroxide as the functional ionic source, using glutaraldehyde as cross-linking agent. A three-layer structure with a porous intermediate layer for each composite membrane was observed using SEM. It was found that the concentration of potassium hydroxide solution used to prepare the composite membranes largely influenced the pore volume, porosity, pore size of the intermediate layer, as well as determined the content of potassium hydroxide inside the composite membranes, whereas the degree of cross-linking of composite membrane did not show notable effects. All composite membranes showed significant decreases in both their T_g and onset thermal degradation temperatures with respect to the solid cross-linked chitosan membranes without containing potassium hydroxide. Potassium hydroxide was found to be located inside the intermediate layer of composite membranes with shapes of bulky or fabric crystals. The crystalline properties of matrices of the composite membranes themselves were remarkably modified after being incorporated with potassium hydroxide and main crystalline peaks of matrices almost disappeared for all composite membranes.