Loss of benzaldehyde in the fragmentation of protonated benzoylamines: Benzoyl cation as a hydride acceptor in the gas phase

In electrospray ionization tandem mass spectrometry of protonated 1‐benzoylamines (1‐benzoylpiperadine, 1‐benzoylmorpholine, and 1‐benzoyl‐4‐methylpiperazine), the dominant fragmentation pathway was amide bond cleavage to form benzoyl cation and neutral amine. Meanwhile, in their fragmentations, an interesting loss of benzaldehyde (106 Da) was observed and identified to derive from hydride transfer reaction between the benzoyl cation and amine. A stepwise mechanism for loss of 106 Da (benzene and CO) could be excluded with the aid of deuterium labeling experiment. Theoretical calculations indicated that hydride transfers from amines (piperadine, morpholine, and 1‐methylpiperazine) to benzoyl cation were thermodynamically permitted, and 1‐methylpiperazine was the best hydride donor among the 3 amines. The mass spectrometric experimental results were consistent with the computational results. The relative abundance of the iminium cation (relative to the benzoyl cation) in the fragmentation of protonated 1‐benzoyl‐4‐methylpiperazine was higher than that in the fragmentation of the other 2 protonated 1‐benzoylamines. By comparing the fragmentations of protonated 1‐benzyl‐4‐methylpiperazine and protonated 1‐benzoyl‐4‐methylpiperazine and the energetics of their hydride transfer reactions, this study revealed that benzoyl cation was a hydride acceptor in the gas phase, but which was weaker than benzyl cation.     

The indanyl cation: a real time observation

A stopped‐flow investigation by U.V. spectroscopy has been carried out using various reactions which yield the indanyl cation: polymerization of indene by trifluoromethane sulfonic acid (TfOH), ionization of 1‐chloroindane by antimony pentafluoride and protonation of a dimer of indene (2‐α‐indanyl indene) by TfOH, at variable temperature. The monomer and dimer cations present a main absorption at 318‐325 nm and the polyindene cation at 330 nm. A side reaction yields a derived cation, which absorbs at 519 nm. The molar absorbance of the indanyl cation has been estimated (ϵ=15 500 L.mol.⁻¹ cm⁻¹).     

Dissociation of toluene cation: a new potential energy surface

The potential energy surface (PES) for the formation of tropylium and benzylium ions from toluene cation (1) has been explored theoretically. Quantum chemical calculations at the B3LYP/6-311++G and G3//B3LYP levels were performed. A pathway to form o-isotoluene (5-methylene-1,3-cyclohexadiene) cation (5) from 1 was found. The isomerization occurs by two consecutive 1,2-H shifts from CH(3) to the ortho position of the aromatic ring via a distonic benzenium cation (2), which is also an intermediate in the well-known isomerization of 1 to cycloheptatriene cation (4). Since the barrier for the formation of 2 is the highest in the two isomerization pathways, 1, 4, and 5 are interconvertible energetically prior to dissociation. The benzylium ion can be produced via 5 as well as from 1 and the tropylium ion via 4. Rice-Ramsperger-Kassel-Marcus model calculations were carried out based on the obtained PES. The result agrees with previous experimental observations. From a theoretical analysis of kinetics of the isomerizations and dissociations, we suggest that 5 plays an important role in the formation of C(7)H(7)(+) from 1.     

X-ray crystal structures of a benzonorbornenyl cation and of a protonated benzonorbornenol

The crystal structure of the 9-methylbenzonorbornenyl cation Me-1+ shows a relatively strong interaction between the sp(2)-hybridized carbon atom C9 and the aromatic ring (C4a-C9 identical with C8a-C9 = 1.897(10) A). The anion Sb(2)F(11)(-) is refined as rotationally disordered along the Sb...Sb axis. In sharp contrast to the findings about Me-1+, the protonated anti-benzonorbornenol 5+ is essentially an oxonium ion with only weak interaction between the C9 bridge and the aromatic ring despite the fact that it is already a positively charged ion, which upon loss of a water molecule is expected to give the parent cation H-1+. The hydrogen atoms on the oxonium O atom are involved in strong hydrogen bonds to chlorosulfonate anions and probably partially disordered despite the large estimated pK(a) differences between the corresponding acid-base pairs. The experimentally determined cation structures are compared with structures computed by DFT methods. Detailed experimental procedures are given.     

Studies of 9-fluorenyl carbocations. intramolecular hydride migration in a substituted 9-fluorenyl carbocation

The substituted fluorenyl cation, 9-(diphenylmethyl)fluoren-9-yl cation (4), is formed under stable ion conditions (low temperature/strong acid) from its corresponding alcohol 3. This ion is transformed to a substituted diphenyl methyl cation 8 at ambient temperature via an apparent 1,2-hydrogen shift. Irradiation of 9-(diphenylmethyl)fluoren-9-ol in methanol gives products derived from the corresponding cation along with radical-derived products from C-C and C-O homolysis processes. The laser flash photolysis of this alcohol gave a transient corresponding to cation 4. All of the photoproducts are derived from cation 4 or radical pathways. High level MO calculations point to a high barrier (23.8 kcal x mol(-1)) for the 1,2-hydride shift. This barrier is the consequence of the minimum energy conformation of this fluorenyl cation which is less than ideal for the periplanar geometry necessary for this process.     

Selective activation of glycosyl donors utilising electrochemical techniques: a study of the thermodynamic oxidation potentials of a range of chalcoglycosides

A series of six chalcoglycosides (phenyl-2,3,4,6-tetra-O-benzoyl-1-seleno-beta-D-glucopyranoside, phenyl-2,3,4,6-tetra-O-benzyl-1-seleno-beta-D-glucopyranoside, phenyl-2,3,4,6-tetra-O-benzyl-1-thio-beta-D-glucopyranoside, p-tolyl-2,3,4,6-O-benzoyl-1-thio-beta-D-glucopyranoside, p-tolyl-2,3,4,6-O-benzyl-1-thio-beta-D-glucopyranoside, and phenyl-2,3,4,6-O-benzyl-beta-D-glucopyranoside) are voltammetrically interrogated in dimethyl sulfoxide, so as to determine their formal (i.e. thermodynamic) redox potentials. The electrochemical oxidation of the chalcoglycoside is shown to follow an overall EC-type mechanism, in which the electro-generated cation radical undergoes an irreversible carbon-chalcogen bond rupture to produce the corresponding glycosyl cation, which may react further. The kinetics of the initial heterogeneous electron transfer process and subsequent irreversible homogeneous chemical degradation of the radical cation are reported, with values for the standard electrochemical rate constant k(0) in the order of 10(-2) cm s(-1) and the first order homogeneous rate constant, k(1), of the order of 10(3) s(-1). The formal oxidation potentials were found to vary according to the identity of the chalcogenide, such that OPh > SPh similar to STol > SePh.     

pH transients during salt removal in isoelectric trapping separations: a curse revisited

The pH transients that occur during isoelectric trapping separations as a result of the removal of nonampholytic ionic components have been re-examined. Salts containing strong electrolyte anions and cations, both with equal and dissimilar mobilities, have been studied using anodic and cathodic buffering membranes whose pH values were both equidistant and nonequidistant from pH 7. The direction and magnitude of the pH transient (acidic or basic) was found to depend on both the mobilities of the anion and cation (mu(anion)/mu(cation)) and the pH difference between pH 7 and the pH of the buffering membranes (|pH(memb) (anodic) - 7|/|7 - pH(memb) (cathodic)|). When |pH(memb) (anodic) - 7|/|7 - pH(memb) (cathodic)| = 1, mu(anion)/mu(cation)<1 leads to an acidic pH transient, mu(anion)/mu(cation) = 1 eliminates the pH transient and mu(anion)/mu(cation)>1 leads to a basic pH transient. When mu(anion)/mu(cation) = 1, |pH(memb) (anodic) - 7|/|7 - pH(memb) (cathodic)|<1 leads to a basic pH transient, |pH(memb) (anodic) - 7|/|7 - pH(memb) (cathodic)| = 1 eliminates the pH transient and |pH(memb) (anodic) - 7|/|7 - pH(memb) (cathodic)|>1 leads to an acidic pH transient. By selecting appropriate anodic and cathodic buffering membranes to adjust the |pH(memb) (anodic) - 7|/|7 - pH(memb) (cathodic)| value, pH transients caused by dissimilar anion and cation mobilities can be avoided.     

Kinetic studies of a fast, reversible alkene radical cation cyclization reaction

The radical cation formed by mesylate heterolysis from the 1,1-dimethyl-7,7-diphenyl-2-mesyloxy-6-heptenyl radical was studied in several solvents. Computational results suggest that the initially formed acyclic radical cation is a resonance hybrid with partial positive charge in both double bonds of 1,1-diphenyl-7-methyl-1,6-octadiene (10). Thiophenol trapping was used as the competing reaction for kinetic determinations. The acyclic radical cation rapidly equilibrates with a cyclic distonic radical cation, and thiophenol trapping gives acyclic product 10 and cyclic products, mainly trans-1-(diphenylmethyl)-2-(1-methylethenyl)cyclopentane (11). The rate constants for cyclization at ambient temperature were k = (0.5-2) x 10(10)(s-1), and those for ring opening were k = (1.5-9) x 10(10)(s-1). Laser flash photolysis studies in several solvents show relatively slow processes (k = (2.5-260) x 10(5)(s-1) that involve rate-limiting trapping reactions for the equilibrating radical cations. In mixtures of fluoroalcohols RfCH2OH in trifluoromethylbenzene, variable-temperature studies display small, and in one case a negative, activation energies, requiring equilibration reactions prior to the rate-limiting processes. Fast equilibration of acyclic and cyclic radical cations implies that product ratios can be controlled by the populations of the acyclic and cyclic species and relative rate constants for trapping each.     

Observation of a simple vibrational wavepacket in a polyatomic molecule via time-resolved photoelectron velocity-map imaging: a prototype for time-resolved IVR studies

We have prepared a coherent superposition of the two components of a Fermi resonance in the S1 state of toluene at approximately 460 cm(-1) with a approximately 1 ps laser pulse and monitored time-resolved photoelectron velocity-map images. The photoelectron intensities oscillate with time in a manner that depends on their kinetic energy, even though full vibrational resolution in the cation is not achieved. Analysis of the time-dependent photoelectron spectra enables information on the composition of the S1 wavepacket to be deduced. Such an experiment, in which a whole set of partially dispersed cation vibrational states are detected simultaneously, suggests an efficient method of studying intramolecular vibrational energy redistribution processes in excited states.     

Radical cation of a trimethylenemethane with a nondegenerate ground state

Upon ionization by gamma-irradiation in frozen CFCl(3), or by X-irradiation in an Ar matrix, 2,2,3,3-tetramethylmethylenecyclopropane (MCP-Me4) readily undergoes ring opening to yield the radical cation of 1,1,2,2-tetramethyltrimethylenemethane (TMM-Me4). The hyperfine-coupling constants for TMM-Me4(.+) are (mT) -1.99 (2H), +0.53 (6H), and +0.19 (6H), and the singly occupied orbital closely resembles one of the two degenerate nonbonding pi-MOs (NBMOs) of trimethylenemethane (TMM). Due to the expected effect of the methyl substituents, this "symmetric" NBMO, psi(2+) (b(1)), is energetically favored relative to its "antisymmetric" counterpart, psi(2-) (a(2)), so that the ground state assumes a structure with (2)B(1) symmetry in the C(2v) point group. Calculations show that the ring opening in the primary radical cation MCP-Me4(.+) to yield TMM-Me4(.+) is spontaneous, whereas in the parent system (MCP(.+) --> TMM(.+) a low barrier does exist. In contrast to the previously investigated case of the radical cation of tetramethyleneethane, the "electromer" of TMM-Me4(.+), in which the unpaired electron occupies psi(2-), cannot be attained photochemically.     

Electrosynthesis of N-Arylazoles by Electrolyzing a Mixture of Azole and 1,4-Dimethoxybenzene in a Diaphragmless Cell

An analysis is performed and data are compared on the electrosynthesis of N-arylazoles and regularities of this process in conditions of a diaphragmless galvanostatic electrolysis (Pt, MeCN, Bu₄NClO₄) of a mixture of 1,4-dimethoxybenzene (DMB) with azoles (pyrazole, triazole, their derivatives, tetrazole). Electrolysis of an azole/DMB mixture leads to the formation of products of an ortho-substitution—1,4-dimethoxy-2-(azolyl-1)benzenes—and, simultaneously, hydrolytically unstable products of an ipso-bis-attachment—1,4-dimethoxy-1,4-di-(azolyl-1)cyclohexa-2,5-dienes. The overall yield of these compounds increases upon adding a base (collidine) or an acid (AcOH) into the initial mixture, and the basicity of initial azoles substantially affects the electrosynthesis results. New notions on the nature of nucleophilic species interacting with radical cation of DMB are considered. The species in question are complexes of azoles with one another or with collidine generated at the expense of the hydrogen bond, rather than azolate ions. Furthermore, the cathodic process is largely connected not with the generation of azolate ions (as a result of the reduction of initial azoles) but with the deprotonation of onium compounds (BH⁺)—products of the interaction of azoles or collidine with protons. The mechanism of electrosynthesis of N-arylazoles is discussed. The key stages of the synthesis are the attack of a nucleophile on the ipso- and, possibly, ortho-positions of the benzene ring of radical cation of DMB, as well as the rearrangement of the intermediate cation of 1,4-dimethoxy-1-(azolyl-1)arenonium into the cation of 1-(azolyl-1)-2,5-dimethoxyarenonium, which affects both the yield and ratio of final products of the reaction mixture.     

Novel functionalized ionic liquid with a sulfur atom in the aliphatic side chain of the pyrrolidinium cation

A novel ionic liquid, never reported in literature until now, was properly designed, synthesized and preliminary investigated. This material was prepared combining the N-methylpyrrolidinium cation (PYR_1(2S1))⁺, exhibiting a sulfur atom in the alkyl side chain, with the bis(trifluoromethanesulfonyl)imide anion, (TFSI)⁻, to be addressed as safer electrolyte component for sulfur-based battery systems. The presence of sulfur within the cation side chain was found to prevent the crystallization of the ionic liquid even in the presence of lithium salt. Cyclic voltammetries have clearly indicated that Li⁺ cation exhibits good mobility and is reversibly plated/stripped in PYR_1(2S1)TFSI–LiTFSI electrolytes with high efficiency.     

Synthesis of a calix[4]arene derivative for isolation of a stable cation radical salt for use as a colorimetric sensor of nitric oxide

We have designed and synthesized a modified calixarene derivative (1) that allows, for the first time, the isolation of a stable cation radical salt that binds a single molecule of nitric oxide deep within its cavity with remarkable efficiency (KNO >108 M-1), as demonstrated by isolation of a crystalline complex [1, NO]+ and its characterization by X-ray crystallography as well as by optical spectroscopy. Furthermore, the ready accessibility of the calixarene cation radical will allow the exploration of its use for developing efficient sensing devices for nitric oxide based on the accompanied color changes.     

Effect of magnetic field on property of a non-aqueous solvent upon complex formation between kryptofix 22DD with yttrium (III) cation

To understand the effect of a magnetized solvent upon complexation processes between the metal ions and the ligands, we studied the complexation reaction between Y⁺³ cation with the kryptofix 22DD, in non-magnetized and magnetized methanol solvents at different temperatures using the conductometric method. Addition of kryptofix 22DD to the cation solution causes a continuous increase in the molar conductivities which indicates that the mobility of the complexed cation is higher than the uncomplexed one in both non-magnetized and magnetized methanol solvents. The conductance data show that the stoichiometry of the complex formed between the ligand and Y³⁺ cation is 1:1(M:L). The value of stability constant of (kryptofix 22DD.Y)³⁺ complex was determined from conductometric data using a non-linear least-square program (GENPLOT). The results obtained in this investigation, show that the stability constant of the complex decreases when we use magnetized methanol solvent.     

Structure and conformation properties of 1-alkyl-3-methylimidazolium halide ionic liquids: a density-functional theory study

The structures and conformational properties of 1-alkyl-3-methylimidazolium halide ionic liquids have been studied with a Becke's 3 Parameter functional method. The interaction mechanisms between the cation and the anion in 1-ethyl-3-methylimidazolium (Emim+) halide and 1-butyl-3-methylimidazolium (Bmim+) halide ionic liquids were investigated using 6-31G*, 6-31++G**, and 6-311++G** basis sets. Forty structures of different ion pairs were optimized and geometrical parameters of them have been discussed in details. Halide ions (Cl- or Br-) have been gradually placed in different regions around imidazolium cation and the interaction energies between the anion and the cation have been calculated. Theoretical results indicate that there are four activity regions in the vicinity of the imidazolium cations, in these regions the imidazolium cations and the halide anions formed stable ion pairs. Imidazolium cations can form hydrogen bond interactions with one, two or three but no more than three nearest halide anions. The halide ions are situated in hydrogen bond positions rather than at random.     

A study of out-of-plane cation dynamics in a bis-thiourea pyridinium chloride inclusion compound

The out-of-plane motion of the pyridinium cation in the bis-thiourea pyridinium chloride inclusion compound has been studied in a wide temperature range using (1)H NMR, dielectric spectroscopy and quasielastic neutron scattering. The geometry of this motion is obtained from the Q-dependence of the elastic incoherent structure factor determined from the quasielastic neutron scattering measurements. We find that the pyridinium cation performs out-of-plane reorientations around the axis passing through two opposite atoms of the ring. The correlation times as a function of temperature were measured in the three known crystallographic phases, finding a good agreement between the three techniques employed. The activation energy for this motion changes from 5 ± 1 kJ mol(-1) in the low-temperature phase to 1.2 ± 0.2 kJ mol(-1) in the intermediate and high-temperature phases.     

The role of ion-molecule pairs in solvolysis reactions. Nucleophilic addition of water to a tertiary allylic carbocation.

The acid-catalyzed solvolysis of 2-methoxy-2-phenyl-3-butene (1-OMe) in 9.09 vol % acetonitrile in water provides 2-hydroxy-2-phenyl-3-butene (1-OH) as the predominant product under kinetic control along with the rearranged alcohol 1-hydroxy-3-phenyl-2-butene (2-OH) and a small amount of the rearranged ether 2-OMe. The more stable isomer 2-OH is the predominant product after long reaction time, K(eq) = [2-OH](eq)/[1-OH](eq) = 16. The ether 2-OMe reacts to give 2-OH and a trace of 1-OH. Solvolysis of 1-OMe in (18)O-labeled water/acetonitrile shows complete incorporation of (18)O in the product 1-OH, confirming that the reaction involves cleavage of the carbon-oxygen bond to the allylic carbon. A completely solvent-equilibrated allylic carbocation is not formed since the solvolysis of the corresponding chloride 1-chloro-3-phenyl-2-butene (2-Cl) yields a larger fraction of 1-OH. This may be attributed to a shielding effect from the chloride leaving group. Quantum chemical calculations of the geometry and charge distribution show that the cation should rather be described as a vinyl-substituted benzyl cation than as an allyl cation, which is in accord with its higher reactivity at the tertiary carbon.     

The syntheses and electrochemical studies of a ferrocene substituted diiminopyridine ligand and its p, s, se, and te complexes

A new reversible, redox active diiminopyridine ligand (1Fc) containing pendant ferrocene functionalities was isolated and fully characterized. The reaction of 1Fc with chalcogen pseudohalides of sulfur, selenium, and tellurium yielded the respective N,N',N″-chelated chalcogen dications. Phosphorus chemistry proceeded in a related manner but, in this case, by the direct addition of 1Fc with PI(3) to yield the N,N',N″-chelated P(I) cation. These species represent the first synthesized main group complexes involving a redox active diiminopyridine ligand containing pendant ferrocenes. Electrochemical studies of the free ligand shows a reversible two-electron process. The chelated phosphorus cation, however, displayed three events, the first being a quasi-reversible two-electron process, involving the oxidation at the P(I) center, resulting in a P(III) cation. The subsequent reversible one- and two-electron processes arise from the ligand framework and pendant ferrocenes, respectively.     

Thermal and photochemistry of a pyrene dihydrodioxin (PDHD) and its radical cation: a photoactivated masking group for ortho-quinones

Pyrene dihydrodioxins (1 and 2) have been synthesized and shown to be effective photochemical blocking groups for pyrene-4,5-dione (3). The mechanism of quinone release proceeds through the formation of a remarkably stable radical cation. Direct evidence is provided that this radical cation is not only thermally labile but also photochemically labile, and that both pathways lead to quinone extrusion. Once initiated with UV light, the pyrene quinone product serves as an electron-transfer photosensitizer for the further release of quinone with visible light.     

Theoretical calculation of the NMR spin-spin coupling constants and the NMR shifts allow distinguishability between the specific direct and the water-mediated binding of a divalent metal cation to guanine

The calculated intermolecular and intramolecular indirect NMR spin-spin coupling constants and NMR shifts were used for the discrimination between the inner-shell and the outer-shell binding motif of hydrated divalent cations Mg(2+) or Zn(2+) with a guanine base. The intermolecular coupling constants (1)J(X,O6) and (1)J(X,N7) (X = Mg(2+), Zn(2+)) can be unambiguously assigned to the specific inner-shell binding motif of the hydrated cation either with oxygen O6 or with nitrogen N7 of guanine. The calculated coupling constants (1)J(Mg,O6) and (1)J(Zn,O6) were 6.2 and -17.5 Hz, respectively, for the inner-shell complex of cation directly interacting with oxygen O6 of guanine. For the inner-shell coordination of the cation at nitrogen N7, the calculated coupling constants (1)J(Mg,N7) and (1)J(Zn,N7) were 5.6 and -36.5 Hz, respectively. When the binding of the cation is water-mediated, the coupling constant is zero. To obtain reliable shifts in NMR parameters, hydrated guanine was utilized as the reference state. The calculated change of NMR spin-spin coupling constants due to the hydration and coordination of the cation with guanine is caused mainly by the variation of Fermi-contact coupling contribution while the variation of diamagnetic spin-orbit, paramagnetic spin-orbit, and spin-dipolar coupling contributions is small. The change of s-character of guanine sigma bonding, sigma antibonding, and lone pair orbitals upon the hydration and cation coordination (calculated using the Natural Bond Orbital analysis) correlates with the variation of the Fermi-contact term. The calculated NMR shifts delta(N7) of -15.3 and -12.2 ppm upon the coordination of Mg(2+) and Zn(2+) ion are similar to the NMR shift of 19.6 ppm toward the high field measured by Tanaka for N7 of guanine upon the coordination of the Cd(2+) cation (Tanaka, Y.; Kojima, C.; Morita, E. H.; Kasai. Y.; Yamasaki, K.; Ono, A.; Kainosho, M.; Taira, K. J. Am. Chem. Soc. 2002, 124, 4595-4601). The present data indicate that measurements of NMR intermolecular coupling constants may be used to discriminate between the specific inner- and outer-shell binding of divalent cations to nucleobases in DNA and RNA.