竹纤维/聚丙烯复合材料界面相容性研究进展

竹纤维具有密度低、强度高、价格低和可再生等优点,是工程结构材料中的理想增强材料。以竹纤维增强聚丙烯是目前制备高性能聚丙烯复合材料的研究热点,也是可持续发展的重要方向之一。为得到高性能的复合材料,需要对竹纤维和聚丙烯基体界面进行处理。本文综述了改善竹纤维与聚丙烯基体界面相容性的三种方法,包括竹纤维的表面改性、聚丙烯基体的改性和添加第三组分,指出了三种方法的优缺点,并展望了提高竹纤维/聚丙烯复合材料界面相容性的研究方向。     

负载壳聚糖及其衍生物的材料表面血液相容性研究进展

壳聚糖及其衍生物具有多种生物活性,基于壳聚糖及其衍生物的材料表面改性是获取各种生物活性表面的重要手段,在生物材料领域显示出广阔的应用前景。为了获得血液相容性良好的壳聚糖改性生物材料表面,可通过引入具备抗凝活性的壳聚糖衍生物或壳聚糖/抗凝剂复合物来抑制壳聚糖固有的促凝作用。本文综述了负载有壳聚糖或其衍生物的材料表面的血液相容性改性方法方面的进展,并根据表面改性方法的不同按照物理改性和化学改性分别对其进行了阐述。     

等离子体技术在医用材料表面改性中的应用

本文从血液相容性、组织相容性、低分子物的渗出、药物缓释等方面出发,对等离子体处理、等离子体聚合、等离子体接枝聚合在医用材料表面改性中的应用作了综合介绍。     

生物医用材料表面仿细胞膜结构改性

细胞膜因其固有的生物相容性,可以作为体内植入材料及器件表面生物相容化改性的范例。大量研究结果表明,用细胞外层膜的亲水官能团－磷酰胆碱基团修饰材料表面,可显著提高材料的生物相容性,具有广阔的应用前景。本文综述了用含磷酰胆碱基团小分子及聚合物进行仿细胞膜结构改性的各种方法及其代表性工作;讨论了不同方法得到的仿细胞膜结构表面的性能;总结了几种有影响的生物相容性机理;对仿细胞膜结构表面改性研究及应用的前景做了展望。     

表面改性氢氧化镁阻燃聚丙烯的研究进展

聚丙烯是综合性能良好的五大通用塑料之一,但是其易燃的特点限制了其在很多领域的应用。氢氧化镁(MH)作为一种环境友好型的无机阻燃剂,常被用于阻燃聚丙烯,但是未经改性的MH极性强,易团聚,与基体的相容性差,难以在聚合物基体中均匀分散,在导致阻燃效率低的同时,对复合材料的力学性能也有很大的负面影响,为提高MH在聚合物基体中的界面相容性,往往需要对MH进行表面改性。本文总结了近几年来以表面化学改性、表面接枝改性、微胶囊化改性三种方法改性的MH阻燃聚丙烯的研究进展,并对其下一步的研究方向进行了展望。     

以PEG为间隔基固定赖氨酸制备血液相容的聚氨酯材料

通过多步表面改性方法制备了血液相容性好的聚氨酯材料. 以PEG为间隔基将ε-赖氨酸通过Schiff碱反应和进一步的还原反应连接于聚氨酯表面. 该表面的水接触角和XPS结果表明, PEG和ε-赖氨酸成功接枝. 用蛋白质吸附和血栓溶解实验对材料的血液相容性进行了研究. 蛋白质吸附结果表明, 相对于改性前的聚氨酯, ε-赖氨酸改性后的表面能减少纤维蛋白原的吸附量近80%. 血栓溶解测试结果显示, ε-赖氨酸改性后的表面能够在13 min内使初生的血栓溶解. 这些结果证实, 改性后的表面不仅能抑制非特异性蛋白质的吸附, 而且在测试条件下能溶解初生的血栓.     

聚砜共价键合磷铵两性离子的结构修饰及其血液相容性的研究

利用形成碳-氧键将磷铵两性离子(1)共价键合到聚砜(PSF)材料表面,改善其抗凝血性能.首先对聚砜(PSF)进行氯甲基化反应,生成苄氯结构,然后通过自合成两性离子化合物1中的—OH与氯甲基化聚砜的—CH2Cl反应形成醚键,将两性离子结构接枝在PSF上.用ATR-FTIR、EA和1H-NMR表征了产物结构,并通过水接触角、溶血实验和血小板黏附实验对结构修饰前后材料的亲水性和抗凝血性能进行了比较.改性PSF材料的表面亲水性提高,几种改性PSF材料的溶血率均低于5%,PSF-18.1%1材料的表面几乎没有血小板黏附.结果表明,磷铵两性离子结构修饰的聚砜材料可以显著提高其血液相容性,在血液相容性材料等领域具有潜在的应用价值.     

PP固相接枝改性研究进展

聚丙烯(PP)是一种具有优异性能且价格低廉的通用高分子材料,但由于聚丙烯为非极性聚合物,其染色性、亲水性、粘结性等均较差,且与其它材料的相容性也很差,这些缺点限制了聚丙烯的应用。通过固相接枝法改性聚丙烯,不仅可以在保持聚丙烯原有优异性能的情况下引入极性官能团,而且具有低温、低压、低成本、较高的接枝率和无需溶剂回收等优点。本文简要介绍了PP固相接枝反应机理,从接枝单体角度综述了近几年PP固相接枝改性的研究进展,并讨论了反应工艺对接枝产物的接枝率、接枝效率和性能的影响。     

聚醚聚酯嵌段共聚物共混物表面组成的ESCA研究

<正> 关于生物医用材料的微多相分离结构和适宜的亲、疏水性同它血液相容性间关系的研究已有不少文献报道。由于材料在使用时真正同血液相接触的只是材料的表面部分,因此材料的表面组成、结构和性质对它的血液相容性就具有更为直接的关系。对聚醚     

生物降解高分子——一类重要的生物材料 2.生物相容性及脂肪族聚酯的表面改性

脂肪族聚酯是一类越来越受到关注的生物可降解生物材料。由于所有的医疗和药物制品在临床应用时都将不同程度地同机体组织或血液接触,而其表面又将是首先与机体组织或血液接触的部分,因此脂肪族聚酯医用制品的表面生物相容性更是同制品生物安全性和有效性有直接关系的性质。本文在分析脂肪族聚酯自身特性及对其制品表面生物相容性影响因素的基础上,介绍了采用物理、化学和等离子体处理方法对脂肪族聚酯制品表面生物相容性的改进。在分析和讨论各表面改性方法优点的同时,也指出了该法所存在的缺点、不足和应用的局限性。从而可为提高具体的脂肪族聚酯医用制品的表面生物相容性提供可供选择的表面改性方法。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.