Magnetic Microcapsules with Low Permeable Polypyrrole Skin Layer

Summary: The paper describes a perspective approach to significantly decrease permeability of polyelectrolyte multilayered capsules and, therefore, to make them more efficient for encapsulation of small molecule species. The polyelectrolyte shell modification by a dense polymer (polypyrrole) provides the capsule shell with water‐resistant and sufficient barrier properties. However, high brittleness of polypyrrole coatings demands more gentle capsule processing conditions. Magnetite iron oxide nanoparticles were used as a shell constituent to provide the capsules with magnetic properties and, therefore, to propose a mild technological protocol for capsule treating.

CLSM image of TRITC filled PPy covered capsules prepared by magnetic sedimentation.     

Mechanical properties of polyelectrolyte-filled multilayer microcapsules studied by atomic force and confocal microscopy

By using a combination of atomic force and confocal microscopy, we explore the deformation properties of multilayer microcapsules filled with a solution of strong polyelectrolyte. Encapsulation of polyelectrolyte was performed by regulation of the multilayer shell permeability in water-acetone solutions. The "filled"capsules prepared by this method were found to be stiffer than "hollow" ones, which reflects the contribution of the excess osmotic pressure to the capsule stiffness. The force-deformation curves contain three distinct regimes of reversible, partially reversible, and irreversible deformations depending on the degree of compression. The analysis of the shape of compressed capsules and of the inner polyelectrolyte spacial distribution allowed one to relate the deformation regimes to the permeability of the multilayer shells for water and inner polyelectrolyte at different stage of compression.     

Entrapment of α‐Chymotrypsin into Hollow Polyelectrolyte Microcapsules

Stable hollow polyelectrolyte capsules were produced by the layer‐by‐layer assembling of non‐biodegradable polyelectrolytes – poly(allylamine) and poly(styrenesulfonate) on melamine formaldehyde microcores followed by the core decomposition at low pH. A proteolytic enzyme, α‐chymotrypsin, was encapsulated into these microcapsules with high yields of up to 100%. The encapsulation procedure was based on the protein adsorption onto the capsule shells and on the pH‐dependent opening and closing of capsule wall pores. The protein in the capsules retained a high activity, and thermo‐ and storage stability. The nanostructured polyelectrolyte shell protected the proteinase from a high molecular weight inhibitor. Such enzyme‐loaded capsules can be used as microreactors for biocatalysis.     

Fabrication of micro reaction cages with tailored properties

Hollow polyelectrolyte capsules in micro- and submicrometer size were prepared. Their interior was functionalized by a "ship in bottle" synthesis of copolymers. While the monomers permeated the capsule wall easily, the formed polymers remained in the capsule cage. The physicochemical properties of the capsule interior such as ion strength, pH, light absorption, and fluorescence could be controlled independently from the surrounding solvent by means of the chemical nature of the captured polymer. In case of polyelectrolytes the osmotic pressure of the counterions led to a swelling of the capsules which can be important for micromechanics. The functionalization with light-sensitive materials allowed selective photoreactions inside the capsules. Synthesis of polyelectrolytes at high concentration resulted in an intertwining of the capsule wall with the polymer. The modified walls behaved like ion exchange membranes and showed selectivity toward adsorption and permeation of organic ions. The modified capsules offer many possibilities for novel applications as containers for controlled precipitation, as nanoreactors for catalyzed reactions, or as sensors.     

Layer-by-layer assembly of polyoxometalates into microcapsules

The polyoxometalate (POM) chemistry world has been experiencing an unparalleled development of rapid synthesis of new compounds and slow development of POM-based functional materials and devices. Meanwhile, researchers in the microcapsule world, encouraged by the introduction of the layer-by-layer method, are pursuing good components for constructing functional capsule devices. Here, in view of the versatile properties that POM-based microcapsules may possess, various types of POM-polyelectrolyte composite microcapsules were constructed using the layer-by-layer method. Microscopy reveals that polyoxometalates form nanoparticles on the shell in the presence of cationic polyelectrolytes. These nanoparticles connected with polyelectrolytes constitute the shell and support the microcapsule from collapse after drying, and this is an interesting characteristic different from those of common composite and polyelectrolyte capsules. Fourier transform infrared (FTIR), UV-vis absorption, and X-ray photoelectron spectroscopy (XPS) were used to examine the properties of the POMs in the microcapsules. The obtained microcapsules exhibit higher thermal stability than polyelectrolyte microcapsules. Furthermore, the functions of POMs were maintained when they were assembled into microcapsules. It is proved that microcapsules bearing POMs with redox activity can provide a reduction environment, which can lead to the realization of in situ synthesis of materials, and that microcapsules with photoluminescent POMs as a component can also have a photoluminescent property, providing a way to develop functional capsule devices. This work may provide an opportunity to enrich both the polyoxometalate chemistry and the capsule field.     

Rates of transport through a capsule membrane to attain Donnan equilibrium

The swelling of a capsule consisting of salt solution and polyelectrolyte, surrounded by a membrane, is studied. The membrane allows salt and water to pass, but is impermeable to polyelectrolyte molecules. Equilibrium swelling of the capsule is governed by Donnan equilibrium. Transport rates of a salt and water through the membrane are expressed in terms of a Darcy permeability and a salt diffusivity. The governing equations predict that the rate at which equilibrium is attained as the external salt concentration varies is controlled by the timescale for diffusion of salt, rather than by that for Darcy flow. Experiments were performed using capsules with membranes made of covalently linked HSA and alginate. The capsule volume varied with a single relaxation rate when the external salt concentration was changed, as predicted by theory. This constitutes the first step toward a simple method for determining the membrane properties of capsules by measuring rates of change of capsule volume.     

Spatially Confined Tungstate Ion Polymerization in Microcapsules

A new approach for performing the WO₄²⁻ polymerization reaction exclusively inside polyelectrolyte capsules of a micron scale size is demonstrated. This approach is based upon a pH gradient across the capsule shell (2.5 inside the capsule volume and 6.5 outside the capsule) caused by encapsulated poly(styrene sulfonate) molecules. During the first stage of the reaction, different polytungstate anions were synthesized. Crystalline WO₃ nanoparticles were formed inside the capsule as the final polymerization product.

The tungstate ion polymerization confined within a micron‐sized polyelectrolyte capsule described herein.     

New method for fabrication of loaded micro- and nanocontainers: emulsion encapsulation by polyelectrolyte layer-by-layer deposition on the liquid core

A novel approach to the emulsion encapsulation was developed by combining the advantages of direct encapsulation of a liquid colloidal core with the accuracy and multifunctionality of layer-by-layer polyelectrolyte deposition. Experimental data obtained for the model oil-in-water emulsion confirm unambiguously the alternating PE assembly in the capsule shell as well as the maintenance of the liquid colloidal core. Two different mechanisms of capsule destruction upon interaction with the solid substrate were observed and qualitatively explained. The proposed method can be easily generalized to the preparation of oil-filled capsules in various oil/water/polyelectrolyte systems important in the field of pharmacy, medicine, and food industry.     

Determination of electroinactive organic acids with LC and amperometric detection, using a PPy coated electrode

This paper reports on the amperometric detection of electroinactive sulfonic acids, organic acids and phosphate esters subsequent to chromatographic separation. The working electrode consisted of a 3 mm diameter glassy carbon electrode, coated with electrochemically deposited polypyrrole. The electrode was placed in a large volume wall jet cell, and a potential of +750 mV versus SCE was applied. The electroinactive analytes were detected as they induce a current, which originates from their effect on the doping of the polypyrrole coating. This allows sensitive detection of electrochemically inactive organic acids. Detection limits for sulfonic acids in LC with 4.6-mm ID columns (1 ml min(-1) flow rate) were 3 ng. The electrode had a linear response in the 1x10(-6) to 1x10(-3) M concentration range. The response time of the electrode was 3.6 s in a FIA set up. Peak heights are quasi independent on the flow rate, indicating that the phenomenon is not controlled by mass transfer in the diffusion layer. The electrode activity decreases to 50% after 24 h of continuous use. The electrode can be partly reactivated after application of a potential of -300 mV (versus SCE) for 1 h.     

Permeability and conductivity of red blood cell templated polyelectrolyte capsules coated with supplementary layers

The permeability of ions and small polar molecules through polyelectrolyte multilayer capsules templated on red blood cells was studied by means of confocal microscopy and electrorotation. Capsules were obtained by removing the cell after polyelectrolyte multilayer formation by means of NaOCl treatment. This procedure results in cross-linking of poly(allylamine hydrochloride) (PAH) molecules and destroying poly(styrene sulfonate) (PSS) within the multilayer. Capsules are obtained being remarkably different from layer-by-layer (LbL) capsules. These capsules are rather permeable for low as well as for high molecular weight species. However, upon adsorption of extra polyelectrolyte layers the permeability decreased remarkably. The assembly of six supplementary layers of PAH and PSS rendered the capsule almost impermeable for fluorescein. Resealing by supplementary layers is a potential means for filling and release control. By means of electrorotation measurements, it was shown that the capsule walls obtained isolating properties in electrolyte solutions. Conclusions are drawn concerning the mechanism of permeability through cell templated polyelectrolyte multilayer capsules.     

Dynamics and stability of dispersions of polyelectrolyte-filled multilayer microcapsules

The authors report dynamic and coagulation properties of a dispersion of polyelectrolyte multilayer microcapsules filled with solutions of a strong polyelectrolyte. Microcapsules are shown to take a charge of the sign of encapsulated polyions and are characterized by a nonuniform distribution of inner polyions, which indicates a semipermeability of the shell and a leakage of counterions. The capsule self-diffusion coefficient in the vicinity of the similarly charged wall is measured using a particle tracking procedure from confocal images of the dispersion. The diffusion of capsules in the force field suggests that the effective interaction potential contains an electrostatic barrier, so that we deal with the same types of interaction forces as for solid particles. The theoretical estimates of the authors show that when microcapsules are in close proximity, their interaction should even be quantitatively the same as that of colloids with the same surface potential. However, due to the mobility of inner polyions they might repel stronger at large distances. The authors thus conclude that the encapsulation of charged polymers is an important factor in determining the adhesion and interaction properties of multilayer microcapsules.     

Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).     

UV-cross-linkable multilayer microcapsules made of weak polyelectrolytes

Microcapsules composed of weak polyelectrolytes modified with UV-responsive benzophenone (BP) groups were fabricated by the layer-by-layer (LbL) technique. Being exposed to UV lights, capsules shrunk in the time course of minutes at irradiation intensity of 5 mW/cm(2). The shrinkage adjusted the capsule permeability, providing a novel way to encapsulate fluorescence-labeled dextran molecules without heating. Cross-linking within the capsule shells based on hydrogen abstraction via excited benzophenone units by UV showed a reliable and swift approach to tighten and stabilize the capsule shell without losing the pH-responsive properties of the weak polyelectrolyte multilayers.     

Preparation of a Conducting Flexible Material from Silane Coupling Agent and Hydroxyl Terminated Polybutadiene Rubber by Hydrolysis and Condensation

Abstract

Synthesis and characterization of a flexible polymer produced from silane coupling agent (SCA) and hydroxyl terminated polybutadiene (HTPB) were performed. Mechanical properties of chemically and electrochemically prepared conducting composites synthesized from this polymer were investigated. Conductivities of the composites were also measured. Polypyrrole enhanced the mechanical properties of the chemically prepared conducting composite. Doping with iodine greatly changed the conductivity of the composite. However, the change in mechanical properties and the conductivities of the electrochemically prepared composite were not as significant when compared with the electrochemically prepared polypyrrole. Among the composites, a chemically prepared composite was highly flexible like rubber. However, the electrochemically produced composite possesses two orders of magnitude higher conductivity. Also, this composite revealed higher tensile strength and elasticity with respect to pristine polypyrrole.     

Synthesis of binary polyelectrolyte/inorganic composite capsules of micron size

Different approaches for the synthesis of binary polyelectrolyte/inorganic layered composite capsules of micron size are described. As the polyelectrolyte part of the composite, a poly(styrene sulfonate)/poly(allylamine hydrochloride) complex was taken; the inorganic component was composed of magnetic nanoparticles (Fe₃O₄, CoFe₂O₄, MnFe₂O₄, ZnFe₂O₄), insulator nanoparticles (rare-earth fluorides) or metal nanoparticles (Ag). An inner inorganic layer was formed inside the hollow polyelectrolyte capsule via chemical or photochemical reaction in a spatially restricted capsule volume. The inorganic nanophase synthesized was characterized by transmission electron microscopy, scanning electron microscopy, and wide angle X-ray scattering techniques and weakly crystallized particles 6–9 nm in diameter were detected, presumably attached to the inner side of the capsule shell. Polyelectrolyte capsules filled with ferrite (magnetite) particles possess substantial magnetic activity and are easily manipulated in water solution by an external magnetic field.     

Electrical properties of polypyrrole wires measured by scanning probe microscope

Hybrid wires composed of metal and conducting polymer (polypyrrole, Ppy) were electrochemically synthesized using a template synthesis method. We showed that the dimensions of the hybrid wires can be tailored by controlling the time of electrolysis. The electrical properties of Ppy having different lengths were measured using a scanning probe microscope (SPM) tip as an electrode without aligning the hybrid wires on a substrate. Especially, temperature-dependent characteristics of the I-V curve were determined. As we expected, the shorter the Ppy wire is, the better the current response produced. The activation energy of each Ppy wire is determined. It is confirmed that the electrical properties of a single wire of Ppy can be measured by SPM.     

Electrolyte-gated transistors based on conducting polymer nanowire junction arrays

In this study, we describe the electrolyte gating and doping effects of transistors based on conducting polymer nanowire electrode junction arrays in buffered aqueous media. Conducting polymer nanowires including polyaniline, polypyrrole, and poly(ethylenedioxythiophene) were investigated. In the presence of a positive gate bias, the device exhibits a large on/off current ratio of 978 for polyaniline nanowire-based transistors; these values vary according to the acidity of the gate medium. We attribute these efficient electrolyte gating and doping effects to the electrochemically fabricated nanostructures of conducting polymer nanowires. This study demonstrates that two-terminal devices can be easily converted into three-terminal transistors by simply immersing the device into an electrolyte solution along with a gate electrode. Here, the field-induced modulation can be applied for signal amplification to enhance the device performance.     

Templated globules — applications and perspectives

Polyelectrolyte capsules represent a class of particles composed of an internal core and an external polymer matrix shell. In recent years, it has become clear that the manufacture of polyelectrolyte capsule is likely to have a significant role in several areas including medicine and biology. Many distinct methodologies for the fabrications of templated globules have been reported. Despite the huge availability of knowledge used to obtain such globules, the choice of the appropriate technology for the desired applications demands a deeper appreciation of this issue. Furthermore, the extent to which the applications of polyelectrolyte capsule may be actively involved in the practical biomedical field is still a fascinating challenge.     

胶束增强型聚电解质胶囊的结构研究

研究了胶束增强型聚电解质(PAH/PSS和PADA/PSS)胶囊在不同溶液环境中的形貌变化,发现这种新型的胶囊具有迥异于传统聚电解质胶囊的囊壁结构;研究了二维聚电解质复合膜与模板溶解液中嵌段共聚物PS-b-PAA胶束之间的相互作用,发现胶束层可以通过静电力与聚电解质胶囊囊壁相互作用.同时,模拟模板溶出后聚电解质胶囊内部的环境条件,研究了嵌段共聚物胶束在胶囊内部的存在状态及其在透析过程中的变化规律,认为共聚物可以通过疏水作用沉积于聚电解质复合膜的内壁,并通过Ca2+离子的桥联作用稳定,也就是在聚电解质复合膜层基础上又形成了一层胶束层.即这种胶束增强型聚电解质微胶囊的囊壁是由聚电解质层和胶束层所形成的双层结构.用这种双层结构模型,我们合理解释了胶囊在高盐离子浓度下的形貌变化.     

Strong response of multilayer polyelectrolyte films to cationic surfactants

The influence of common cationic surfactants on the physical properties of differently composed polyelectrolyte films prepared by the layer-by-layer (LbL) technology was investigated. Free-standing polyelectrolyte films as microcapsules showed a fast, strong response to the addition of less than 1 mM cationic surfactant cetyltrimethylammonium bromide (CeTAB). As a function of the polyelectrolyte composition, the behavior of the capsules varied from negligible changes to complete disintegration via strong swelling. The response of microcapsules consisting of (poly(allylamine hydrochloride)(PAH)/poly(styrene sulfonate)(PSS))(4) was associated with a 5-fold volume increase, a fast switch of permeability, and in the case of fluorescently labeled films a 4-fold increase in fluorescence intensity. The kinetics and strengths of the interaction process were investigated by confocal laser scanning microscopy (CLSM) and fluorescence spectroscopy. Also, the relative stabilities of the polycation/polyanion and surfactant/polyanion complexes were determined. A mechanism was suggested to explain the interactions between the cationic surfactants and polyelectrolyte capsules. The strong response can be exploited in potential applications such as the triggered release of drugs or other encapsulated materials, the fluorescence-based detection of cationic detergents, and a switchable stopper in microchannels. However, the high sensitivity of LbL films to traces of cationic surfactants can also limit their applicability to the encapsulation of drugs or other materials because pharmaceutical or technical formulations often contain cationic surfactants as preservatives such as benzalkonium salts (BAC). It was demonstrated that undesired capsule opening can be effectively prevented by cross-linking the polyelectrolyte multilayers.