基于电子散斑干涉与数字剪切散斑干涉法的悬臂薄板振动分析

基于激光光路的光波随机相位扰动,分析了电子散斑干涉实时图像相减时模态条纹图的形成机理,提出了一种振幅涨落测量法。搭建了用于离面振动分析的电子散斑干涉和数字剪切散斑干涉测量系统,并对完整和含狭缝的悬臂铝板的振动特性进行了实验研究。实验结果表明,实时图像相减模式获得的模态条纹图对比度明显优于其他方法,得到的前10阶模态条纹图与有限元法计算结果具有良好的一致性。相比于电子散斑干涉法,数字剪切散斑干涉法对试样局部的刚度变化和缺陷更敏感。     

旋转剪切散斑干涉法的研究

本文提出一种新的动态散斑照相法——旋转剪切散斑干涉法.文中给出了理论分析和初步的实验结果.该方法不仅能在一张剪切散斑图上记录物体动态变形的全过程,而且在全场滤波分析时能方便地给出任一瞬时物体的变形信息,得到清晰的、高衬比的干涉条纹图.该方法设备简单,用途广泛.     

退火铝合金中Portevin-Le Chatelier效应的数值模拟研究

通过综合考虑沉淀动力学和动态应变时效机理，建立了一套具有明确物理内涵的唯象本构模型.并在对不同加载应变率下的单轴拉伸实验的数值模拟中，得到了3种类型的Portevin-Le Chatelier效应应力曲线.计算结果与实验数据的较好吻合，验证了该模型的有效性. 关键词： Portevin-Le Chatelier效应 动态应变时效 数值模拟     

二次波面干涉的剪切散斑干涉计量术

提出了一种新的剪切散斑干涉方法─—二次波面干涉的剪切散斑干涉计量术．这一方法将被测物体变形前后波面的第一次干涉信息分别储存在两张全息干板上，通过光学信息处理实现波面的第二次干涉．两次波面干涉分别消除了位移和位移的一阶导数场对波面位相的影响，得到仅反映位移二阶导数场的条纹图．     

数字剪切散斑干涉术中的刚体位移补偿的新方法

给出一个数字剪切散斑干涉术中的刚体位移补偿的新方法，当刚体位移大于一个像素时，加载前后的散斑图将会由于位置的变化导致失相关，重新安排每一个像素将会克服此失相关，散斑平均、条纹重构以及迭代方法用来改善条纹质量，消除散斑噪声，最后得到可取结果。     

数字散斑干涉三维变形测量技术研究进展

三维变形可以转换为应力/应变分布,是材料性能测试和结构可靠性分析的关键参数。在众多三维变形测量技术中,数字散斑干涉技术可以高精度地测量三维变形信息,在航空航天、汽车、先进制造、土木工程和生物医学等行业发挥着十分重要的作用。从散斑干涉基本原理出发,详细介绍了几类三维变形散斑干涉测量技术,并分析比较各类方法的优缺点;同时介绍了散斑干涉三维变形测量技术的国内外研究进展和最新应用;最后展望了散斑干涉三维变形测量技术在动态同步测量、测量系统简化以及应用范围扩宽等方面的发展趋势。     

剪切散斑干涉术的统计分析

本文用统计光学方法分析了剪切散斑图的成象过程;散斑图的频谱分布以及全场滤波干涉条纹的形成.发现剪切散斑干涉条纹不仅与三维位移微分有关,而且与面内位移量有关.在此基础上又讨论了影响干涉条纹质量的有关因素,并作了实验验证.     

数字散斑法在局域剪切带三维变形研究中的应用

在适当的温度、应变率和预变形下,合金材料的拉伸试验中,将会出现伴随应力锯齿形跌落的雪崩式剪切变形带,即波特文-勒夏特利埃(Portevin-Le Chatelier,PLC)效应。利用高速数字摄像系统(分辨力1000 frames/s)并结合数字散斑干涉法(Digital speckle pattern interferometry,DSPI)和数字散斑相关法设计了一套光学变形测量系统,实现了拉伸试验中对试件表面三维变形的实时、精确测量。利用该光学系统对铝铜合金试件在拉伸试验中产生的跳跃传播的局域剪切带瞬态成核过程进行捕捉。通过结合数字散斑相关法得到的面内变形定量结果和数字散斑干涉法得到的表现离面变形的条纹图,再现了剪切变形带成核和传播瞬间的三维变形过程。     

散斑剪切干涉条纹特性的实验研究

本文通过位移位相存在的真实性实验、小孔滤波的必要性实验、位移梯度的解相关性实验,证实了散斑剪切于涉术的条纹是由物体变形所引起的“位移位相”和“位移微分位相”以及由位移和位移微分共同决定的“附加位相”之和的余弦条纹。实验证实这种余弦条纹的分布,随着滤波孔的位置而变化,它的衬比随着位移和位移梯度的增大而下降。特别是,当在象面上一点相遇的两个物点的象面散斑位移之差的模值大于散斑的直径时,两者相遇的象点上的条纹消失。     

频闪剪切散斑干涉术的研究

提出了一种用于振动研究的方法——频闪剪切散斑干涉照相法。该方法由于采用了剪切镜,能得到较为精确的散斑剪切图,提高了测量的精度,是一种用于振动研究较为理想的散斑照相的新方法。讨论了频闪剪切散斑干涉术的基本原理,给出了频闪剪切散斑图的全场分析的平均光强分析的解析式,并给出了实验结果。理论和实验都表明频闪剪切散斑干涉照相法要优于时间平均剪切散斑干涉照相法。该方法在全场滤波分析时,能给出任一瞬时物体振动信息,得到清晰的、高衬比的全场干涉条纹图,是一种实用可行的方法。     

红外测温法研究Al-Mg合金中的Portevin-Le Chatelier效应

试件塑性变形过程伴随着机械能向热能的转化.利用红外测温法,通过分析红外热像仪采集的温度场图像,系统研究了Al-Mg合金中的Portevin-Le Chatelier （PLC）效应.在不同应变率下,实验得到了三类锯齿形应力-应变曲线,分析了相应情况下试件温度变化曲线的异同及其原因,探讨了三种类型PLC变形带的空间传播特性.研究发现,试件表面的温升随着应变率的增加而增加;PLC带的倾角转向发生在试件的两端或者带外的温度最高处. 关键词： Portevin-Le Chatelier效应 红外测温 Al-Mg合金     

基于数字图像相关法的Mg含量对Al合金Protein-Le Chatelier效应影响的实验研究

利用数字图像相关法研究了常温与恒定应变率(5.00×10~(-3)s~(-1))下Mg含量(质量分数)分别为2.30%,4.57%,6.10%及6.91%四种Al-Mg合金Portevin-Le Chatelier(PLC)效应的宏观变形行为.实验发现,Mg含量的增加导致强化效果的增强;低Mg含量(2.30%)合金中锯齿跌落幅值基本保持不变,而在高Mg含量(4.57%,6.10%,6.91%)合金中随应变增加而增加.锯齿跌落幅值随Mg含量增加而逐渐增大,在高Mg含量合金中趋于饱和.宏观局域变形带的观察结果表明PLC带宽不随Mg含量或者应变改变而变化,带内变形量随着Mg含量或者应变的增加而逐渐增大.此外,在低Mg含量合金的加载曲线后段(应变约为0.3时)观测到了特殊的周期性的衰减锯齿,相应的时域PLC带演化表明加载曲线的周期性转变大锯齿对应着空间上PLC带的转向,幅度逐渐减小的振荡对应着PLC带的传播,且在转向前后PLC带均向上连续传播.     

固溶处理对Al-Cu合金中Portevin-Le Chatelier效应空域行为的影响

研究了在定加载速率拉伸条件下，固溶处理对Al-Cu合金材料中PLC(Portevin-Le Chatelier)效应空域行为的影响.在较低拉伸速率时，变形初期PLC变形带在试件宽度方向中央附近某点处“成核”.随着变形的继续，出现多带共存的现象.且带宽较小，带与拉伸轴向的夹角较大.在较大拉伸速率条件下，PLC变形带先连续传播，再随机出现. 关键词： PLC效应 动态应变时效 固溶处理     

Investigation of Portevin-Le Chatelier effect in 5456 Al-based alloy using digital image correlation

A variety of experimental methods have been proposed for Portevin-Le Chatelier (PLC) effect. They mainly focused on the in-plane deformation. In order to achieve the high-accuracy measurement, three-dimensional digital image correlation (3D-DIC) was employed in this work to investigate the PLC effect in 5456 Al-based alloy. The temporal and spatial evolutions of deformation in the full field of specimen surface were observed. The large deformation of localized necking was determined experimentally. The distributions of out-of-plane displacement over the loading procedure were also obtained. Furthermore, a comparison of measurement accuracy between two-dimensional digital image correlation (2D-DIC) and 3D-DIC was also performed. Due to the theoretical restriction, the measurement accuracy of 2D-DIC decreases with the increase of deformation. A maximum discrepancy of about 20% with 3D-DIC was observed in this work. Therefore, 3D-DIC is actually more essential for the high-accuracy investigation of PLC effect.     

Influence of solute cloud and precipitates on spatiotemporal characteristics of Portevin-Le Chatelier effect in A2024 aluminum alloys

In this paper, solute concentration and precipitate content in A2024 aluminum alloy are adjusted by solution treatment (ST) at different temperatures and tensile experiments on these treated specimens are carried out. It is found that the temperature of solution treatment (ST temperature) has a remarkable influence on the amplitude of the serrated flow and the propagation characteristics of shear bands. These results are due to the effects of solute atoms and precipitates on dynamic strain aging (DSA). When ST temperature is higher than 300~℃, solute concentration is relatively high and solute cloud is a key factor of DSA. When ST temperature is lower than 300~℃, precipitate content is relatively high and the mechanism of DSA is determined by precipitates.     

析出相在铝镁合金Portevin-Le Chatelier效应中的作用研究

本文研究了在相同退火热处理条件下,不同析出相含量的两种铝镁合金5456和5052在不同加载应变率下的P-LC效应. 结果表明析出相对两种材料的P-LC效应有明显影响,并且析出相含量的不同所产生的影响不同. 此外,析出相含量较少的5052合金的溶质原子的扩散方式是管扩散,而析出相含量较多的5456合金不再局限于管扩散的方式,而是更为复杂. 关键词： Portevin-Le Chatelier effect 动态应变时效 铝镁合金     

Deformation measurements of three types of Portevin--Le Chatelier bands

In this paper a technique based on high-speed digital photography and the digital speckle correlation (DSC) method is used for the quantitative measurement of the displacement and strain fields of various Portevin--Le Chatelier (PLC) bands (types A, B, and C). The experimental results clearly show the nucleation process of a type-B band and the propagation of a type-A band. The results also reveal that there exists an elastic shrinkage deformation outside a PLC band during a large avalanche-like deformation inside the PLC band.     

Recurrence analysis of the Portevin-Le Chatelier effect

Tensile tests were carried out by deforming polycrystalline samples of Al-2.5%Mg alloy at room temperature in a wide range of strain rates where the Portevin-Le Chatelier (PLC) effect was observed. The experimental stress-time series data have been analyzed using the recurrence analysis technique based on the Recurrence Plot (RP) and the Recurrence Quantification Analysis (RQA) to study the change in the dynamical behavior of the PLC effect with the imposed strain rate. Our study revealed that the RQA is able to detect the unique crossover phenomenon in the PLC dynamics.     

On the dynamical mechanism of cross-over from chaotic to turbulent states

The Portevin-Le Chatelier effect is one of the few examples of organization of defects. Here the spatio-temporal dynamics emerges from the cooperative behavior of the constituent defects, namely dislocations and point defects. Recent dynamical approach to the study of experimental time series reports an intriguing cross-over phenomenon from a low dimensional chaotic to an infinite dimensional scale invariant power-law regime of stress drops in experiments on CuAl single crystals and AlMg polycrystals, as a function of strain rate. We show that an extension of a dynamical model due to Ananthakrishna and coworkers for the Portevin-Le Chatelier effect reproduces this cross-over. At low and medium strain rates, the model shows chaos with the structure of the attractor resembling the reconstructed experimental attractor. At high strain rates, the model exhibits a power-law statistics for the magnitudes and durations of the stress drops as in experiments. Concomitantly, the largest Lyapunov exponent is zero. In this regime, there is a finite density of null exponents which itself follows a power law. This feature is similar to the Lyapunov spectrum of a shell model for turbulence. The marginal nature of this state is visualized through slow manifold approach.