Novel ion-binding C3 symmetric tripodal triazoles: synthesis and characterization

Novel C₃ symmetric tripodal molecules were synthesized from cyclohexane 1,3,5-tricarboxylic acid. Utilizing click and Sonogashira reactions, ion-binding triazole and pyridazin-3(2H)-one units were incorporated to form polydentate ligands for ion complexation. The structures of the novel C₃ symmetric derivatives were extensively characterized by ¹H, ¹³C and 2D NMR techniques along with HRMS and IR. The copper(I)-binding potentials of these ligands were investigated by using them as additives in model copper(I)-catalysed azide-alkyne cycloaddition (CuAAC) reactions. The copper(I) complexation ability of our compound was also proved by different spectroscopic methods, such as mass spectrometry, UV and NMR spectroscopy. Based on the mass spectrometric data all of the C₃ symmetric ligands formed 1:1 complex with copper(I) ion. The specific role of C₃ symmetric polydentate form in the complexation process was also discussed      

Crystal structures and spectral properties of new Cd(II) and Hg(II) complexes of monensic acid with different coordination modes of the ligand

The single crystal X-ray structures and the spectroscopic properties of complexes of monensic acid (C₃₆H₆₂O₁₁·H₂O) with toxic metal ions of Cd(II) and Hg(II) are discussed. The cadmium(II) complex (1) is of composition [Cd(C₃₆H₆₁O₁₁)₂(H₂O)₂] and crystallizes in the monoclinic system (space group P2(1), Z = 2) with a = 12.4090(8), b = 24.7688(16), c = 14.4358(11) Å, β = 91.979(7)°. Two ligand monoanions are bound in a bidentate coordination mode to Cd(II) via the carboxylate and the primary hydroxyl oxygens occupying the equatorial plane of the complex. The axial positions of the inner coordination sphere of Cd(II) are filled by two water molecules additionally engaged in intramolecular hydrogen bonds. The Hg(II) complex (2), [Hg(C₃₆H₆₀O₁₁)(H₂O)], crystallizes in the orthorhombic system (space group P2(1)2(1)2(1), Z = 4) with a = 12.7316(2), b = 16.4379(3), c = 18.7184(4) Å. The monensic acid reacts with Hg(II) in a tetradentate coordination manner via both oxygen atoms of the carboxylate function and oxygens of two hydroxyl groups. The twofold negative charge of the ligand is achieved by deprotonation of carboxylic and secondary hydroxyl groups located at the opposite ends of the molecule. Hg(II) is surrounded by five oxygen atoms in a distorted square pyramidal molecular geometry.

Open image in new window

     

Copper complexes formed by 3,5-bis(2,2′-bipyridin-4-ylethynyl)benzoic acid and its methyl and ethyl esters as studied by electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry was used to study the complexes of ligands containing two bipyridine units, namely 3,5-bis(2,2-bipyridin-4-ylethynyl)benzoic acid (1) and its methyl and ethyl esters (2, 3), with copper cation, with CuCl₂ as a source of copper. It was found that the type of complexes formed strongly depends on CuCl₂ concentration. At lower CuCl₂ concentration, the detected complexes were rather simple and some of them were formed upon electrospray ionization conditions e.g. ions [2₂+Cu₂]²⁺ and [3₂+Cu₂]²⁺ (complexes ligand-Cu(I) of stoichiometry 2:2) which are analogical to the well known, for quaterpyridine, helical complexes. At higher CuCl₂ concentration, the detected complexes were more complicated, and most of them contained copper cations bridged by chlorides. The largest ions were [L₂+Cu₄Cl₆]²⁺. The CID MS/MS spectra of these ions allowed determination of their mass spectrometric fragmentation pathways and as a consequence their structure elucidation.      

The crystal structure of Ho<Subscript>4</Subscript>Ni<Subscript>11</Subscript>In<Subscript>20</Subscript>

The polycrystalline Ho₄Ni₁₁In₂₀ was obtained by arc-melting of the elements. The subsequent high temperature procedure was used for single crystal growth. Crystal structure of the compound was investigated by X-ray single crystal method: U₄Ni₁₁Ga₂₀ type, C 2/m, a = 22.4528(17), b = 4.2947(3), c = 16.5587(13) Å, β = 124.591(5)°, R1 = 0.0276, wR2 = 0.0493 for 1989 independent reflections with [I>2σ(I)].The structure is composed of three-dimensional network from Ni and In atoms in which Ho atoms fill distorted pentagonal channels. Open image in new window     

The synthesis, structure and physical properties of lanthanide(III) complexes with nicotinic acid

This article reports the synthesis of novel, rare-earth coordination complexes with nicotinic acid. Three compounds with the general formula Ln₂[(C₅H₄NCOO)₆(H₂O)₄] (Ln = Yb, 1; Ln = Gd, 2; Ln = Nd, 3) were prepared from relatively cheap and readily available reactants. Their compositions and structure were characterized by IR spectroscopy and single-crystal X-ray diffraction. The magnetic and thermogravimetric properties were also studied. The complexes consist of centrosymetric, dimeric molecules having all six nicotinato ligands coordinated with the central atom in the bidentate mode. The coordination environment of the Ln³⁺ for all three compounds is 8. Here we describe the crystal structure of Yb and Gd complexes with nicotinic acid.      

Copper(I) π-complexes with allyl derivatives of heterocyclic compounds: structural survey of their crystal engineering

In this review an exhaustive crystallochemical analysis of copper(I) π-complexes with allyl derivatives of heterocyclic compounds has been performed. Structural genesis of inorganic constituents starting from the simplest units to the most complicated aggregates was considered taking into account the specific role of Cu-(C=C) interaction, the construction of the organic ligands, the basicity and nucleophilic activity of their heteroatoms, as well as olefin Cu(I) π-complex preparation route.      

Controlled release of amoxicillin from bacterial cellulose membranes

Bacterial cellulose (BC), a natural polymer with unique physical and mechanical properties, has several applications in the biomedical field, including drug loading and controlled drug delivery. For this study, a Box-Behnken experimental design was employed as a statistical tool to optimize the release of a model drug, amoxicillin, from BC membranes. Independent variables studied were the concentration of the drug (X₁), the concentration of glycerol (X₂) and the concentration of a permeation enhancer (X₃). From the variables studied, drug concentration had the highest effect on drug release. Among the other independent variables, th linear and quadratic X₂ terms, the linear X₃ term and the interaction term X₂X₃ were found to affect the release of amoxicillin from bacterial cellulose membranes.

Open image in new window

     

One-pot multicomponent synthesis of substituted 5,7-dihydro-1,6-naphthyridines and 5,6,7,8-tetrahydroquinolines

An one-pot approach was developed for the synthesis of substituted 5,7-dihydro-1,6-naphthyridines and 5,6,7,8-tetrahydroquinolines with moderate to good yields. This pathway is a modified two-step synthesis of Kröhnke pyridine and involves a four-component tandem reaction of N-phenacylpyridinium bromide, aromatic aldehydes, substituted or nitrogen-containing cyclic ketones and a nitrogen source. This multi-component reaction is performed using microwave irradiation heating of the reaction substrates under an environment of NH₄OAc/HOAc.

Open image in new window

     

The use of ultrasonic treatment for improvement of metrological performance of sorption atomic absorption determination of lead(II) and cadmium(II) traces

The optimal parameters for ultrasonic treatment (frequency 200–300 kHz, intensity 2–4 W cm^?2) were obtained to intensify Pb(II) and Cd(II) sorption concentration by carbon sorbent from apricot pit. The combined action of ultrasonic frequency of 18 kHz and 1 MHz on concentrate slurry increases its sedimentation stability from 3 to 180 minutes and decreases S_r value up to 7% at Pb(II), Cd(II) hybrid sorption atomic absorption determination in natural waters, brines, common salt.      

Electrode processes of selected redox active substances on poly(o-aminophenol) film electrode

Using the method of cyclic voltammetry, the electrode process of Ni²⁺, Pb²⁺, Cu²⁺ and pyrocatechin on a poly(o-aminophenol) (PoAP) modified glassy carbon electrode (GCE) was investigated. The PoAP polymer was found to affect the redox process of copper and pyrocatechin. The use of polymer of different thicknesses showed that the obtained film has a dense, nonporous structure. The redox process of the examined substances may be considered as proceeding on the polymer surface. The PoAP polymer obtained in the described conditions takes part in charge transfer.      

Regio- and stereoselectivity of polar [2+3] cycloaddition reactions between (Z)-C-(3,4,5-trimethoxyphenyl)-N-methylnitrone and selected (E)-2-substituted nitroethenes

[2+3] Cycloaddition reactions of the highly reactive (Z)-C-(3,4,5-trimethoxyphenyl)-N-methylnitrone with (E)-2-R-nitroethenes proceed under mild conditions and yield mixtures of stereoisomeric 2-methyl-3-(3,4,5-trimethoxyphenyl)-4-nitro-5-R-isoxazolidines. The effect of regiospecificity of the cycloadditions may be accounted for by the theory of electrophilicity indexes. Stereoselectivity, however, is determined by a compilation of steric and secondary orbital effects.      

New high-pressures vapor-liquid equilibrium data for the carbon dioxide + 2-methyl-1-propanol (isobutanol) binary system

New vapor-liquid equilibria (VLE) data at 333.15, 343.15, and 353.15 K and pressures up to 130.0 bar are reported for the carbon dioxide + 2-methyl-1-propanol (isobutanol) system. The experimental method used in this work was a static analytical method with liquid and vapor phases sampling using a rapid online sampler injector (ROLSITM) coupled to a gas chromatograph (GC) for analysis. Measured VLE data and literature data for carbon dioxide + 2-methyl-1-propanol system were modeled with the Soave-Redlich-Kwong (SRK) cubic equation of state with classical van der Waals (two-parameter conventional mixing rule, 2PCMR) mixing rules. A single set of interaction parameters that lead to a correct phase behavior was used in this work to model the new VLE data and critical points of the mixtures in a wide range of temperature and pressure. The SRK prediction results were compared to the new data measured in this study and to available literature data.

Open image in new window

     

A dimeric copper coumarin complex: synthesis and crystal structure of [{Cu(4-methyl-7-(salicylideneamino)coumarin)2}2]

A binuclear copper complex [{Cu(L)₂}₂], C₆₈H₄₈Cu₂N₄O₁₂C (where L is 4-methyl-7-(salicylideneamino)coumarin), has been synthesized and characterized using elemental analysis, molar conductance measurements, and infrared, ultraviolet and ESR spectrosopy. The molecular structure of title compound, determined by single-crystal X-ray diffraction studies, reveals that the two symmetric Cu(L)2 units are associated into a dimer by rather long Cu...O bonds. The Cu(II) ions are bridged via the phenolic oxygen of one of the monomers and have distorted trigonal bipyramidal conformation geometry. Within each monomer the two methylsubstituted coumarin skeletons are trans to one another, but adopt a parallel arrangement with respect to the other monomer. Only half of the complex molecule can be found in the asymmetric unit, Z′ = 0.5, the other half is generated by the symmetry centre.      

Microwave assisted extraction of essential oils from enzymatically pretreated lavender (<Emphasis Type="Italic">Lavandula angustifolia</Emphasis> Miller)

In this study, microwave assisted a hydrodistillation process (MWHD) of essential oils from lavender (Lavandula angustifolia Miller) was investigated. In order to examine any potential differences in essential oil extraction, the lavender flowers underwent enzymatic pretreatment.A 2³ factorial design of experiments, combined with statistical methods of data analysis were used to optimize enzymatic pretreatment and to evaluate the influence of major variables (enzyme concentration, temperature and pH) on the performance of the microwave assisted extraction.Under optimal conditions, an extraction yield of 24 mg oil g^?1 substrate was achieved (an increase by approximately 25% in comparison with the classic extraction conditions of conventional hydrodistillation).The main compounds of the essential oils obtained were analyzed and identified by gas chromatography coupled to mass spectrometry (GC-MS). Analyzing the data obtained indicated that the content of main compounds (linalool and linalyl acetate ? 73%) was greater than that obtained by conventional extraction (67%).

Open image in new window

     

Synthesis,spectroscopic characterization,crystal structure and antifungal activity of thiourea derivatives containing a thiazole moiety

Four novel thiourea derivatives containing a thiazole moiety were synthesized and characterized by IR, ¹H and ¹³C NMR, mass spectrometry and elemental analysis. The crystal structure of 1a was determined from single crystal X-ray diffraction data. It crystallizes in monoclinic space group P2₁/n with unit cell dimensions a = 11.7752(6) Å, b= 3.8677(2) Å, c= 27.4126(13) Å and β = 92.734(5) Å. There is a strong intramolecular hydrogen bond of the type N-H?O, with H?O distance of 2.5869(19) Å. The mass fragmentation pattern has also been discussed. The antifungal activity of the synthesized compounds was studied by broth micro-dilution method and poisoned food technique. The compounds 1b and 1c possessed a broad spectrum of antifungal activity.

Open image in new window

     

Phenylcopper(I) clusters in the gas phase obtained by laser desorption/ionization from bis(dibenzoylmethane)copper(II)

It has been demonstrated that phenylcopper(I)-containing clusters are generated in the gas phase from bis(dibenzoylmethane) copper(II) (Cu(dbm)₂) by laser desorption/ ionization (LDI) method. For example, the [Cu₅dbm₂(C₆H₅)₂]⁺ ion can be considered as consisting of two Cudbm molecules, two CuC₆H₅ molecules and a Cu⁺ cation. The [Cu₅(C₆H₅)₄]⁺ ion can be considered as phenylcopper(I) cluster (consisting of four phenylcopper molecules) ionized by additional Cu⁺ cation. Results from MS/MS (tandem mass spectrometry) experiments have confirmed the presence of phenylcopper molecules in the analyzed clusters. Ease of preparation of dibenzoylmethane-metal complexes and straightforward method to obtain LDI mass spectra offer a wide range of possibilities to study similar organometallic clusters in the gas phase.      

New 5-bromo-2-hydroxybenzaldehyde S-ethylisothiosemicarbazone and its mixed-ligand Cu(II) complex with imidazole: synthesis, characterization and DFT calculation

A new Schiff base ligand of 5-bromo-2-hydroxybenzaldehyde S-ethyl-isothiosemicarbazone (H₂L) was synthesized and its mixed-ligand Cu(II) complex was also prepared by reaction of Cu(NO₃)₂·3H₂O with H₂L and imidazole. Their structures were fully characterized by elemental analysis, FT-IR, molar conductivity and UV-Vis methods. The analytical data suggest that the metal, H₂L and imidazole ratios in the Schiff base complex are 1:1:1. Single crystal diffraction was also used to better understand the molecular structure of the Cu(II) complex. The results of physico-chemical analyses of the Schiff base complex reveal the coordination geometry around the central atom is square planar. The H₂L ligand (NNO donor) is coordinated to the metal center as a tridentate bionegatively agent. Another position of the square planar geometry is occupied by the imidazole ligand. Furthermore, computational studies of the new complex were performed by carrying out DFT calculations. Geometry optimization and natural band analysis of the complex is discussed in further detail.      

A multi-property fluorescent probe for the investigation of polymer dynamics near the glass transition

In addition to the commonly observed single molecule fluorescence intensity fluctuations due to molecular reorientation dynamics, a perylene bisimide-calixarene compound (1) shows additional on-off fluctuations due to its ability to undergo intramolecular excited state electron transfer (PET). This quenching process is turned on rather sharply when a film of poly(vinylacetate) containing 1 is heated above its glass transition temperature (T _g), which indicates that the electron transfer process depends on the availability of sufficient free volume. Spatial heterogeneities cause different individual molecules to reach the electron transfer regime at different temperatures, but these heterogeneities also fluctuate in time: in the matrix above T _g molecules that are mostly nonfluorescent due to PET can become fluorescent again on timescales of seconds to minutes.The two different mechanisms for intensity fluctuation, rotation and PET, thus far only observed in compound 1, make it a unique probe for the dynamics of supercooled liquids.

Open image in new window

     

Uranium (VI) adsorption equilibrium on purolite resin SGA 600 U/3472

This paper characterizes uranium (VI) sorption from synthetic solutions using a fixed bed Purolite resin SGA 600 U/3472 system. The effect of the sulphate anion presence in the liquid phase on sorbtion dynamics and equilibrium is analysed. In the industrial processing of solutions obtained from leaching of uranium ore (alkaline/acid), in a continuous system, there are several compounds which strongly compete with uranium for ion exchange sites and consequently these substances depress the uranium adsorption. The influence of vanadate, molybdate, chloride, and nitrate is known, therefore, in this paper, the adsorption equilibrium isotherms for uranium (VI) are obtained for different sulphate ion concentrations in solution. The adsorption capacity variation of the Purolite resin SGA 600U/3472 with the number of adsorption/desorption cycles is also studied. The experimental results reveal the negative impact of high sulphate ion content in solution on the adsorption capacity of the resin Purolite SG 600 U / 3472 with uranium (VI) and therefore it is considered one of the compounds which strongly affect the uranium adsorption.

Open image in new window