Localization imaging using blinking quantum dots

The blinking phenomena of the quantum dots have been utilized in the super-resolution localization microscopy to map out the locations of individual quantum dots on a total internal reflection microscope. Our result indicated that the reconstructed image of quantum dots agreed with the topographic image measured by atomic force microscopy. Because of the superior optical properties of the quantum dots, the high localization resolution can be achieved in the shorter acquisition time with larger detected photon numbers. When the cells were labeled with quantum dots, the sub-cellular structures could be clearly seen in the reconstructed images taken by a commercial microscope without using complicated optical systems, special photo-switchable dye pairs or photo-activated fluorescence proteins.     

Photocatalytic reduction of an azide-terminated self-assembled monolayer using CdS quantum dots

Ordered, tightly packed aryl-azide-terminated, self-assembled monolayers (SAMs) were created on gold substrates from a new disulfide precursor. These monolayers were reduced at least partially in an aqueous environment using approximately 2 nm CdS quantum dots (Qdots) as photocatalysts to give mixed monolayers of arylamine- and aryl azide-terminated species. The CdS photocatalysts were made available for the reaction by exposure of the azide-terminated SAM to Qdots initially in solution or by preadsorption of the CdS nanoparticles on the SAM. In either case, X-ray photoelectron spectroscopy (XPS), grazing angle Fourier transform infrared spectroscopy (FTIR), and contact angle measurements were used to show the occurrence of the photocatalytic reduction. As further evidence for the presence of arylamine-terminated thiolate in the reduced SAM, these arylamine groups were successfully tagged with fluorescein isothiocyanate (FITC). The use of Qdot photocatalysts to functionalize surfaces may lead to a means to pattern surfaces at the nanoscale.     

Conjugation of quantum dots with graphene for fluorescence imaging of live cells

It is difficult to achieve fluorescent graphene-quantum dots (QDs) conjugation because graphene quenches the fluorescence of the QDs. In the present study, the conjugation of graphene (reduced graphene oxide, RGO) with QDs via a bridge of bovine serum albumin (BSA) provides a novel highly fluorescent nano probe for the first time. BSA capped QDs are firmly grafted onto polyethylenimine (PEI)/poly(sodium 4-styrenesulfonate) (PSS) coated RGO (graphene-QDs) via electrostatic layer by layer assembly. The strong luminescence of the graphene-QDs provides a potential for non-invasive optical in vitro imaging. The graphene-QDs are used for in vitro imaging of live human carcinoma (Hela) cells. Graphene-QDs could be readily up-taken by Hela cells in the absence of specific targeting molecules, e.g., antibodies or folic acid, and no in vitro cytotoxicity is observed at 360 μg mL(-1) of the graphene-QDs. The results for the imaging of live cells indicated that the cell-penetrating graphene-QDs could be a promising nano probe for intracellular imaging and therapeutic applications.     

Unusual emission transformation of graphene quantum dots induced by self-assembled aggregation

Graphene quantum dots prepared by a one-step hydrothermal procedure in a microwave exhibit an unusual emission transformation in strong acidic media and at high concentration, induced by self-assembled J-type aggregation under restrained π-π interactions.     

Engineering arginine cross-linked mercaptoundecanoic acid CdSe/CdS/ZnS quantum dots for two-photon imaging of live cancer cells

Low toxicity arginine cross-linked mercaptoundecanoic acid CdSe/CdS/ZnS quantum dots were synthesized for two-photon imaging of live cancer cells.     

Photosensitization of nanocrystalline TiO2 by self-assembled layers of CdS quantum dots

CdS quantum dots can be self-assembled on high surface area nanocrystalline TiO2 electrodes; spectroscopic and photoelectrochemical studies indicate that the size, and hence the absorption edge, of the CdS particles can be controlled; efficient photosensitization of the TiO2 electrode by the Q-particles has been achieved.     

Electrochemical recognition of tryptophan enantiomers using self-assembled diphenylalanine structures induced by graphene quantum dots,chitosan and CTAB

Molecular self-assembly offers a promising route to the preparation of advanced materials for the construction of novel chiral sensing devices, and the inspiration for the development of such systems is often derived from simple biological models. Diphenylalanine (FF), an extensively studied short peptide, can self-assemble into highly ordered nano-/micro-structures. Here we report the electrochemical recognition of tryptophan enantiomers using three FF self-assembled structures produced in the presence of graphene quantum dots (GQDs), chitosan (CS) and cetyltrimethylammonium bromide (CTAB). Although the difference in the peak potentials of the enantiomers is very small, enantiomeric differences can be detected by the magnitude of the DPV current signals. The recognition efficiencies of the three self-assembled materials are different, due to the different structures formed during the self-assembly process.     

131I-labeled PEG and folic acid co-functionalized graphene quantum dots for tumor-targeted imaging

Journal of Radioanalytical and Nuclear Chemistry - In this study, we successfully synthesized polyethylene glycol (PEG) and folic acid (FA) co-functionalized graphene quantum dots (GQDs) to improve...     

Recognition of tandem sialic acid residues by CD38: a theoretical study

The electronic structures of gangliosides are described using semiempirical and ab inito molecular orbital theories as well as the density functional theory to clarify the causative factors of the differences in inhibitory effects and to elucidate the recognition mechanisms of the enzyme. Our results suggest that CD38 is likely to recognize the two phosphate groups in NAD and the two carboxyl groups in tandem sialic acid residues of gangliosides. The recognition mechanisms of the substrate are proposed based on the good correlation found between the orbital energy of the highest occupied molecular orbital of the gangliosides and the degree of the inhibitory effect.     

Fluorometric determination of dopamine by using molybdenum disulfide quantum dots

A method is described for the rapid fluorometric determination of dopamine (DA) by using molybdenum disulfide quantum dots (MoS₂ QDs) that were fabricated via an ammonium hydroxide etching method. The probe has a fluorescence (with excitation/emission peaks at 267/380 nm) that is quenched by DA with high selectivity over various interferences. This is attributed to a reaction that occurs between DA and the molybdate ions in pH 9 solutions of MoS₂ QDs. The formation of organic molybdate complexes and of dopamine-quinone results in strong quenching of the fluorescence of the QDs which is due to both electron transfer and an inner filter effect. Under the optimum conditions, the assay works in the 0.1–100 μM DA concentration range, with two linear ranges and a 10 nM detection limit. The method was applied to the determination of DA in spiked artificial urine samples, where it gave recoveries ranging from 97.6 to 102.2%, demonstrating that the method a promising tool for rapid and selective detection of DA.

Open image in new window

Graphical abstract MoS₂ QDs are facilely synthesized via the etching effect of ammonium hydroxide for highly selective fluorometric detection of dopamine.

     

Selective labeling of the endoplasmic reticulum in live cells with silicon quantum dots

A simple and novel approach was developed to obtain water-dispersible silicon quantum dots (Si-QDs) of low toxicity that were able to selectively label the endoplasmic reticulum (ER) in live cells. A block copolymer (Pluronic F127) was used to coat the surface of Si-QDs. Si-QDs form aggregates with diameters of 20-40 nm and show an outstanding optical stability upon UV irradiation. Our F127-treated Si-QDs would be a powerful tool for long-term real-time observation of the ER in live cells.     

Characterization of quantum dots using capillary zone electrophoresis

Commercially available quantum dots (QDs) were characterized using CE. The CE instruments were laboratory-built, each being capable of both electrokinetic and hydrodynamic injection. Modes of detection include UV absorption and LIF. The CE-LIF system was further modified to handle microliter sample volumes during injection. Sodium phosphate (5-25 mM, pH 7.5-11) was found to be a good buffer electrolyte. Sodium mercaptoproprionate CdTe/CdS (ADS620) QDs and carboxylic acid CdSe/ZnS (T2-Evitag) QDs yielded high separation efficiencies of N = 1.5x10(6) plates at t(M) = 10 min and N = 1.0x10(5) plates at t(M) = 3.8 min, respectively. Apparently the EDC/sulfo-NHS bioconjugation chemistry worked well with the neutral T2-Evitag QDs, but not so well with the negatively charged ADS620 QDs. This preliminary knowledge will serve as a basis for new CE immunoassay studies of QD-biomolecule conjugates and their immunocomplexes with target analytes.     

Rapid and simple solid-phase esterification of sialic acid residues for quantitative glycomics by mass spectrometry

A rapid and quantitative method for solid-phase methyl esterification of carboxy groups of various sialylated oligosaccharides has been established. The method employed a triazene derivative, 3-methyl-1-p-tolyltriazene, for facile derivatization of oligosaccharides immobilized onto general solid supports such as Affi-Gel Hz and gold colloidal nanoparticles in a multiwell plate. The workflow protocol was optimized for the solid-phase processing of captured sialylated/unsialylated oligosaccharides separated from crude sample mixtures by chemical ligation. From tryptic and/or PNGase F-digest mixtures of glycoproteins, purification by chemoselective immobilization, esterification and recovery were achieved in the same well of the filter plate within three hours when used in conjunction with "glycoblotting technology" (S.-I. Nishimura, K. Niikura, M. Kurogochi, T. Matsushita, M. Fumoto, H. Hinou, R. Kamitani, H. Nakagawa, K. Deguchi, N. Miura, K. Monde, H. Kondo, High-throughput protein glycomics: Combined use of chemoselective glycoblotting and MALDI-TOF/TOF mass spectrometry: Angew. Chem. 2005, 117, 93-98; Angew. Chem. Int. Ed. 2005, 44, 91-96). The recovered materials were directly applicable to subsequent characterization by mass spectrometric techniques such as MALDI-TOF for large-scale glycomics of both neutral and sialylated oligosaccharides. On-bead/on-gold nanoparticle derivatization of glycans containing sialic acids allowed rapid and quantitative glycoform profiling by MALDI-TOF MS with reflector and positive ion mode. In addition to its simplicity and speed, the method eliminates the use of unfavorable halogenated solvents such as chloroform and dichloromethane or volatile solvents such as diethyl ether and hexane, resulting in a practical and green chemical method for automated robotic adaptation.     

In vitro and intracellular sensing by using the photoluminescence of quantum dots

Quantum dots (QDs) have attracted increasing attention due to their unique physical and chemical properties. This article introduces recent advances in using QDs’ photoluminescence (PL) for in vitro and intracellular sensing analytes, in particular ions, and biomolecules from the last 3 years. Different sensing strategies are demonstrated and compared for increasing the detecting/sensing selectivity. The perspectives for in vitro and intracellular sensing based on QDs’ PL are also discussed.     

Preparation and third-order optical nonlinearity of self-assembled chitosan/CdSe-ZnS core-shell quantum dots multilayer films

The self-assembled chitosan CdSe quantum dots (QDs) and chitosan CdSe-ZnS core-shell QDs films have been prepared by using layer-by-layer electrostatic technique. The well-ordered nanostructure and the layer-by-layer deposition of the QDs are revealed by AFM and exciton absorption spectra, respectively. The optical nonlinearity of the composite films were studied by using Z-scan technique with femtosecond pulses at the wavelength of 790 nm, the value of third-order susceptibility of core-shell QDs are measured to be about 1.1 x 10(-8) esu, which is about 200% larger than that of CdSe QDs of 5.3 x 10(-9) esu. This has potential applications in all-optical switches in optical information processing.     

Ascorbic acid biosensor based on laccase immobilized on an electrode modified with a self-assembled monolayer and coated with functionalized quantum dots

Laccase was immobilized on an electrode modified with a cysteine self-assembled monolayer and coated with functionalized quantum dots. The immobilized laccase is capable of directly transferring an electron. Immobilized laccase retained its activity to oxidize ascorbic acid (AA), and the apparent Michaelis–Menten constant was found to be 0.47 mM. The modified electrode was used to determine AA in the 10 to 140 μM concentration range, with linear response curve and a detection limit of 1.4 μM (s/n?=?3).     

Fluorogenic assay and live cell imaging of HIV-1 protease activity using acid-stable quantum dot-peptide complex

A novel QD-peptide complex for detecting HIV-1 protease activity was prepared from simple one step electrostatic interaction. Fluorescence recovery of the pre-quenched QD through fluorescence resonance energy transfer allowed for in vitro assay and live cell imaging of the protease activity in HIV-1 transfected cells, proving the potential for cell-based protease inhibitor screening.     

Bio-safety assessment of carbon quantum dots,N-doped and folic acid modified carbon quantum dots: A systemic comparison

The carbon quantum dots(CQDs) and their functionalized materials are promising in biomedical field because of their unique properties;meanwhile,a growing concern has been raised about the potential toxicity of these modified materials in biosystem.In this study,we synthesized original CQDs and two common functionalized CQDs including N-doped CQDs(NCQDs) and folic acid-modified CQDs(FACQDs),and compared the toxicity and biocompatibility with each other in vitro and in vivo.L929,C6 and normal cell MDCK were selected to detect the adverse reaction of these materials in vitro.No acute toxicity or obvious changes were noted from in vitro cytotoxicity studies with the dose of these CQD materials increasing to a high concentration at 1 mg/mL.Among these materials,the FA-CQDs show a much lower toxicity.Moreover,in vivo toxicity studies were performed on the nude mice for 15 days.The experimental animals in 10 or 15 mg/kg groups were similar with animals treated by phosphate buffer solution(PBS) after 15 days.The results of the multifa rious biochemical parameters also suggest that the functionalized products of CQDs do not influence the biological indicators at feasible concentration.Our findings in vitro and in vivo through toxicity tests demonstrate that CQDs and their modified materials are safe for future biological applications.     

Phase-transfer of CdSe@ZnS quantum dots using amphiphilic hyperbranched polyethylenimine

A new, straightforward method for the phase-transfer of CdSe@ZnS quantum dots from non-polar solvents into water and short-chained alcohols using amphiphilic hyperbranched polyethylenimine of different molar weights is suggested and the experimental procedure is discussed as well as the chemical properties of the resulting polymer-derivatised nanocrystals.