A Theoretical and Experimental Study of the Effects of Silyl Substituents in Enantioselective Reactions Catalyzed by Diphenylprolinol Silyl Ether

The effect of silyl substituents in diphenylprolinol silyl ether catalysts was investigated. Mechanistically, reactions catalyzed by diphenylprolinol silyl ether can be categorized into three types: two that involve an iminium ion intermediate, such as for the Michael‐type reaction (type A) and the cycloaddition reaction (type B), and one that proceeds via an enamine intermediate (type C). In the Michael‐type reaction via iminium ions (type A), excellent enantioselectivity is realized when the catalyst with a bulky silyl moiety is employed, in which efficient shielding of a diastereotopic face of the iminium ion is directed by the bulky silyl moiety. In the cycloaddition reaction of iminium ions (type B) and reactions via enamines (type C), excellent enantioselectivity is obtained even when the silyl group is less bulky and, in this case, too much bulk reduces the reaction rate. In other cases, the yield increases when diphenylprolinol silyl ethers with bulky substituents are employed, presumably by suppressing side reactions between the nucleophilic catalyst and the reagent. The conformational behaviors of the iminium and enamine species have been determined by theoretical calculations. These data explain the effect of the bulkiness of the silyl substituent on the enantioselectivity and reactivity of the catalysts.     

Mechanisms of the α,α-diphenylprolinol trimethylsilyl ether-catalyzed enantioselective aza-Michael reaction

Depending on the nature of the aza-Michael donor, the C-N bond formation in the α,α-diphenylprolinol trimethylsilyl ether-catalyzed aza-Michael reactions was found to proceed via either (i) an iminol intermediate in a stepwise reaction, or (ii) a concerted reaction. This is contrary to the commonly proposed iminium mechanism for organocatalyst-catalyzed aza-Michael reactions. The iminol intermediate is formed from the reaction between the catalyst and the amine (Michael donor). These proposed mechanisms are able to account for the experimentally observed product enantioselectivity.     

Two Reaction Mechanisms via Iminium Ion Intermediates: The Different Reactivities of Diphenylprolinol Silyl Ether and Trifluoromethyl‐Substituted Diarylprolinol Silyl Ether

The reactions of α,β‐unsaturated aldehydes with cyclopentadiene in the presence of diarylprolinol silyl ethers as catalyst proceed via iminium cations as intermediates, and can be divided into two types; one involving a Michael‐type reaction (type A) and one involving a cycloaddition (type B). Diphenylprolinol silyl ethers and trifluoromethyl‐substituted diarylprolinol silyl ethers, which are widely used proline‐type organocatalysts, have been investigated in this study. As the LUMO of the iminium ion derived from trifluoromethyl‐substituted diarylprolinol silyl ether is lower in energy than that derived from diphenylprolinol silyl ether, as supported by ab initio calculations, the trifluoromethyl‐substituted catalyst is more reactive in a type B reaction. The iminium ion from an α,β‐unsaturated aldehyde is generated more quickly with diphenylprolinol silyl ether than with the trifluoromethyl‐substituted diarylprolinol silyl ether. When the generation of the iminium ion is the rate‐determining step, the diphenylprolinol silyl ether catalyst is the more reactive. Because acid accelerates the generation of iminium ions and reduces the generation of anionic nucleophiles in the Michael‐type reaction (type A), it is necessary to select the appropriate acid for specific reactions. In general, diphenylprolinol silyl ether is a superior catalyst for type A reactions, whereas the trifluoromethyl‐substituted diarylprolinol silyl ether catalyst is preferred for type B reactions.     

Theoretical study of the imidazolidinone catalyzed 1,4-addition of N,N-dimethyl-3-anisidine with α,β-unsaturated butyric aldehyde

Friedel–Crasfts alkylation reactions of α,β-unsaturated butyric aldehydes with N,N-dimethyl-3-anisidine catalyzed by a (2S,5S)-5-benzyl-2-tert-butyl-3-methylimidazolidin-4-one HCl salt have been carried out at the PCM(CH₂Cl₂)/B3LYP/6-311++G(d,p)//B3LYP/6-31G(d) level. Three reaction processes have been characterized: (I) the formation of an iminium ion intermediate; (II) the 1,4-iminium addition of the iminium ion; and (III) the hydrolysis of the addition product. Moreover, Path 1-1 is the favorable channel in the formation of the iminium ion. From the point of view of energy, the enantioselectivity is controlled by the carbon–carbon bond formation step that is involved in both the intermediate M4 and the transition state TS4. The highest energy barrier of the reaction is the H2 proton transfer from the O10 atom of a water molecule to the N1 atom of the catalyst in the hydrolysis process, which is 23.4 kcal/mol. The presented calculated results may be helpful in understanding the experimental product distribution for the title reaction, and provide a general model to help explain the mechanisms of similar reactions.     

(+)-saxitoxin: a first and second generation stereoselective synthesis

A stereoselective synthesis of the bis-guanidinium toxin (+)-saxitoxin (STX), the agent infamously associated with red tides and paralytic shellfish poisoning, is described. Our approach to this unique natural product advances through an unusual nine-membered ring guanidine intermediate 39 en route to the tricyclic skeleton that defines STX. The effectiveness of this strategy is notable, as only four steps are needed to transform 39 into the target molecule, including a four-electron alkene oxidation catalyzed by OsCl3. Construction of the critical monocyclic guanidine has been achieved through two channels, the first of which makes use of Rh-catalyzed C-H amination and highlights a novel class of heterocyclic N,O-acetals as iminium ion equivalents for crafting functionalized amines. A second route to 39 relies on a stereoselective acetylide dianion addition to a serine-based nitrone, thereby facilitating the preparation of STX in just 14 linear steps from commercial material.     

Acyclic stereoselection in the reaction of nucleophilic reagents with chiral N-acyliminium ions generated from N-

Optically active N-[1-(phenylsulfonyl)alkyl]imidazolidin-2-ones react at low temperature in the presence of tin tetrachloride to give acyclic N-acyliminium ions. These electrophilic substrates give addition products upon reaction with pi-nucleophiles. Allyltrimethylsilane affords the corresponding allylated products in good yields and high diastereoselectivity. The stereochemical outcome of this process can be rationalized by taking into account the preference of the intermediate N-acyliminium ion for an E configuration that favors the attack of the nucleophile from the si-si face. Disappointing results are obtained using silyl ketene acetals; conversely trimethylsilyl enol ether of acetophenone gives the corresponding adducts in high diastereoselectivity. The utilization of trimethylsilyl enol ether of 2-acetylfuran is particularly interesting since the corresponding adducts are obtained with good diastereoselectivity and the furan ring could be amenable of further synthetic transformations.     

Insight into Isothiourea‐Catalyzed Enantioselective Addition of Saturated Esters to Iminium Ions

The possible mechanisms and origin of the selectivities of isothiourea‐catalyzed addition of saturated esters to iminium ions have been investigated by density functional theory. The favorable reaction pathway includes three stages: formation of an ammonium enolate intermediate, enantioselective addition of the ammonium enolate intermediate to the iminium ion, and dissociation of the catalyst to form the product. The enantioselective addition process is the stereoselectivity‐determining step, while the chemoselectivity‐determining step is included in the formation of the final product. The calculated energy barriers show that the chemoselectivity is thermodynamically controlled, and it depends on the polarities of the products and the nucleophilicities of the N atoms of the enamine reactant moieties of the intermediates. The origin of the stereoselectivity was investigated by non‐covalent interaction analysis of the key transition states. Hydrogen bonding interactions were identified as the determining factor for controlling the stereoselectivity. The obtained insight will be valuable for rational design of novel Lewis base organocatalyst‐promoted enantioselective addition reactions with special chemoselectivities.     

Organocatalytic Enantioselective Vinylcyclopropane-Cyclopentene (VCP-CP) Rearrangement

We have demonstrated that the catalytic and enantioselective vinylcyclopropane-cyclopentene rearrangement can be carried out on (vinylcyclopropyl)acetaldehydes through activation via enamine intermediates. The reaction makes use of racemic starting materials that, upon ring opening facilitated by the catalytic generation of a donor-acceptor cyclopropane, deliver an acyclic iminium ion/dienolate intermediate in which all stereochemical information has been deleted. The final cyclization step forms the rearrangement product, showing that chirality transfer from the catalyst to the final compound is highly effective and leads to the stereocontrolled formation of a variety of structurally different cyclopentenes.     

Stereodefined N,O-acetals: Pd-catalyzed synthesis from homopropargylic amines and utility in the flexible synthesis of 2,6-substituted piperidines

We developed a conceptually new synthetic strategy which exploits the stereochemical information of labile acyclic N,O-acetals. The key to this strategy, chemo- and stereoselective synthesis of N,O-acetals, was achieved by the Pd-catalyzed addition of sulfonyl-protected homopropargylic amines to alkoxyallene. The N,O-acetals generated in this way were combined with Au-catalyzed cycloisomerization to give an access to 2,6-disubstituted piperidines with stereochemical flexibility.     

Structure-nucleophilicity relationships for enamines

The kinetics of the reactions of benzhydryl cations with 22 enamines, three pyrroles, and three indoles were investigated photometrically in dichloromethane. The nucleophilicity parameters N and slope parameters s of these electron-rich pi-systems were derived from equation log k (20 degrees C)=s(E+N) and compared with the nucleophilicities of other pi-systems (silyl enol ethers, silyl ketene acetals) and carbanions. It is shown that the nucleophilic reactivities of enamines cover more than ten orders of magnitude, comparable to enol ethers on the low reactivity end and to carbanions on the high reactivity end. Since the products of N-attack are thermodynamically less stable than the reactants, the observed rate constants refer to the formation of the carbon bond;carbon bonds. In some cases, equilibrium constants for the formation of iminium ions were measured, which allow one to determine the intrinsic rate constants of these reactions.     

Brønsted acid-catalyzed, enantioselective, vinylogous Mannich reaction of vinylketene silyl N,O-acetals

Vinylketene silyl N, O-acetals undergo chiral phosphoric acid-catalyzed, vinylogous Mukaiyama-Mannich reactions with imines and afford delta-amino-alpha,beta-unsaturated amides in typically good yields, complete gamma-regioselectivity, and up to 92% ee with catalyst loadings of as low as 1 mol %. The Mannich products can be readily manipulated to furnish valuable synthetic intermediates.     

Peroxycarbenium-mediated C-C bond formation: applications to the synthesis of hydroperoxides and peroxides

The Lewis acid-mediated reaction of alkene nucleophiles with peroxyacetals provides an effective route for the synthesis of homologated peroxides and hydroperoxides. In the presence of Lewis acids such as TiCl(4), SnCl(4), and trimethylsilyl triflate, peroxyacetals and peroxyketals undergo reaction with allyltrimethylsilane, silyl enol ethers, and silyl ketene acetals to afford homoallyl peroxides, 3-peroxyketones, and 3-peroxyalkanoates, respectively. Reactions of peroxyacetals are Lewis acid dependent; TiCl(4) promotes formation of ethers while SnCl(4) and trimethylsilyl triflate promote formation of peroxides. Lewis acid-promoted reactions of silylated hydroperoxyacetals furnish silylated hydroperoxides, which can be deprotected to homologated hydroperoxides. Hydroperoxyketals undergo Lewis acid-mediated allylation to furnish 1,2-dioxolanes via attack of hydroperoxide on the intermediate carbocation. Lewis acid-mediated cyclization of unsaturated peroxyacetals furnishes 1,2-dioxanes, 1,2-dioxepanes, and 1,2-dioxacanes through 6-endo/exo, 7-endo/endo, and 8-endo/endo pathways. The corresponding reactions involving 6-endo/endo and 5-endo/exo pathways were unsuccessful.     

Oligosilanylated Silocanes

A number of mono- and dioligosilanylated silocanes were prepared. Compounds included silocanes with 1-methyl-1-tris(trimethylsilyl)silyl, 1,1-bis[tris(trimethylsilyl)silyl], and 1,1-bis[tris(trimethylsilyl)germyl] substitution pattern as well as two examples where the silocane silicon atom is part of a cyclosilane or oxacyclosilane ring. The mono-tris(trimethylsilyl)silylated compound could be converted to the respective silocanylbis(trimethylsilyl)silanides by reaction with KO^tBu and in similar reactions the cyclosilanes were transformed to oligosilane-1,3-diides. However, the reaction of the 1,1-bis[tris(trimethylsilyl)silylated] silocane with two equivalents of KO^tBu leads to the replacement of one tris(trimethylsilyl)silyl unit with a tert-butoxy substituent followed by silanide formation via KO^tBu attack at one of the SiMe₃ units of remaining tris(trimethylsilyl)silyl group. For none of the silylated silocanes, signs of hypercoordinative interaction between the nitrogen and silicon silocane atoms were detected either in the solid state. by single crystal XRD analysis, nor in solution by ²⁹Si-NMR spectroscopy. This was further confirmed by cyclic voltammetry and a DFT study, which demonstrated that the N-Si distance in silocanes is not only dependent on the energy of a potential N-Si interaction, but also on steric factors and through-space interactions of the neighboring groups at Si and N, imposing the orientation of the p_z(N) orbital relative to the N-Si-X axis.     

Mechanistic studies on the catalytic asymmetric Mannich-type reaction with dihydroisoquinolines and development of oxidative Mannich-type reactions starting from tetrahydroisoquinolines

Detailed mechanistic studies on our recently reported asymmetric addition reactions of malonates to dihydroisoquinolines (DHIQs) catalyzed by chiral Pd(II) complexes were carried out. It was found that an N,O-acetal was generated in situ by the reaction of DHIQ with (Boc)2O, and cooperative action of the Pd(II) complex as an acid-base catalyst allowed the formation of a chiral Pd enolate and a reactive iminium ion via alpha-fragmentation. The iminium ion was also accessible via oxidation with DDQ as an oxidant, and a catalytic asymmetric oxidative Mannich-type reaction was achieved with tetrahydroisoquinolines (THIQs) as starting materials. This oxidation protocol was applicable to N-acryloyl-protected THIQs, allowing the efficient synthesis of optically active tetrahydrobenzo[a]quinolizidine derivatives via intramolecular Michael reaction.     

Counterion effects in iminium-activated electrophilic aromatic substitutions of pyrroles

Electrophilic substitution of pyrroles by α,β-unsaturated iminium ions is slow in acetonitrile when only weakly basic counterions are present. When the reactions are carried out in the presence of KCF(3)CO(2), fast deprotonation of the intermediate σ-adducts occurs, and the rate constant for the rate-determining CC bond-forming step can be predicted from the electrophilicity parameter E of the iminium ion and the N and s parameters of the pyrroles.     

On the interaction of silyl triflates with enamines: iminium ion formation versus silylation

The interaction of Me₃SiOTf and (C₆F₅)₃SiOTf with enamines generating α-silyl-substituted iminium ions is investigated. A trimethylsilyl iminium cation is formed as a long-lived species observable by NMR spectroscopy, whilst the tris(pentafluorophenyl)silyl analogue is very labile and prone to the loss of a proton. On the basis of the latter phenomenon, a method for the synthesis of β-silyl enamines is proposed.     

Reaction pathway and rate-determining step of the Schmidt rearrangement/fragmentation: a kinetic study

The Schmidt rearrangement of substituted 3-phenyl-2-butanone with trimethylsilyl azide in 90% (v/v) aqueous TFA gave two types of product, fragmentation and rearrangement, the ratio of which depends on the substituent: more fragmentation for a more electron-donating substituent. Rate measurements by azotometry indicated the presence of an induction period, and the pseudo-first-order rate constants showed saturation kinetics with respect to the azide concentration. It was indicated that the reaction proceeds through pre-equilibrium in the formation of iminodiazonium (ID) ion and that the N(2) liberation from the ID ion is rate-determining. Under high azide concentration conditions, where the effective reactant is the ID ion, the reaction gave a linear Hammett plot with a ρ value of -0.50. The observed substituent effects on the rate and the product selectivity imply that path bifurcation on the way from the rate-determining TS to the product states occurs, as suggested by previous molecular dynamics simulations, in a similar manner to the analogous Beckmann rearrangement/fragmentation reactions.     

Superacid-promoted synthesis of indolizidine derivatives

A series of amido-acetals were reacted with the Brønsted superacid, CF₃SO₃H, to provides indolizidine derives by a cyclization cascade. A mechanism is proposed involving formation of a vinylogous enol which undergoes a 6π-electrocyclization reaction with an adjacent N-acyl iminium ion group. With aryl substituents, there is a strong tendency for the N-acyl iminium ion group to undergo Friedel-Crafts type cyclizations with the aryl group. The synthetic methodology was used to prepare the alkaloid natural product, ipalbidine.     

Acid-base properties and stability of pyrylium polymethine dyes in chlorohydrocarbon solutions

The reactions of pyrylocyanine dyes with aqueous alcoholic alkali and with acetic acid have been studied. It has been shown that decoloration of such dyes in chlorohydrocarbon solutions only occurred under the action of alkali and was linked with the formation of an intermediate acyclic form of the dye which was the addition product of hydroxyl ion at the position of the pyrylium ring.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 312–314, March, 1986.     

A novel four-component reaction of diethylamine, an aromatic aldehyde and an alkyl isocyanide with dialkyl acetylenedicarboxylates in the presence of silica gel: an efficient route for the regio- and stereoselective synthesis of sterically congested alkenes

The 1:1 intermediate generated by the addition of an isocyanide to a dialkyl acetylenedicarboxylate is trapped by the iminium ion intermediate that forms from the reaction between an aromatic aldehyde and diethylamine. The reactions were completed in the presence of silica gel powder. The product dialkyl 2-[(alkylamino)carbonyl]-3-[(Z)-1-(diethylamino)-1-arylmethylidene]succinates, were produced in acceptable yields. The reactions are completely regio- and stereoselective.