Chemical vapor transport of zinc sulfide

Crystals of cubic zinc sulfide with different isotopic compositions have been grown by iodine vapor transport for basic research purposes (vibrational, electronic, and thermodynamic properties). The synthesis reaction in sulfur vapor was found to be controlled by solid-state diffusion of zinc atoms through a ZnS passivation layer. Crystals up to 5 mm in length were grown from small amounts of source material. The presence of argon reduced the nucleation density and favored the formation of facets.     

Synthesis and characterization of type-II textured tungsten disulfide thin films by vdWR process with Pb interfacial layer as texture promoter

The growth of type-II textured tungsten disulfide (WS₂) thin films by solid state reaction between the spray deposited WO₃ and gaseous sulfur vapors with Pb interfacial layer has been studied. X-ray diffraction (XRD) technique is used to measure the degree of preferred orientation ‘S’ and texture of WS₂ films. Scanning electron microscopy (SEM) and transmission electron microscopy techniques have been used to examine the microstructure and morphology. The electronic structure and chemical composition were studied using X-ray photoelectron spectroscopy (XPS). The use of Pb interfacial layer for the promotion of type-II texture in WS₂ thin films is successfully demonstrated. The presence of (0 0 3 l), (where l=1, 2, 3, …) family of planes in the XRD pattern indicates the strong type-II texture of WS₂ thin films. The crystallites exhibit rhombohedral (3R) structure. The large value of ‘S’ (1086) prompts the high degree of preferred orientation as well. The stratum of crystallites with their basal plane parallel to the substrate surface is seen in the SEM image. The EDS and XPS analyses confirm the tungsten to sulfur atomic ratio as 1:1.75. We purport that Pb interfacial layer enhances type-II texture of WS₂ thin films greatly.     

Investigation of the role of cadmium sulfide in the surface passivation of lead sulfide quantum dots

Surface passivation of PbS nanocrystals (NC), resulting in strong photoluminescence, can be achieved by the introduction of CdS precursors. The role of CdS in the surface passivation of PbS NCs is uncertain, as the crystalline structure of CdS and PbS are different, which should impede effective epitaxial overgrowth. Absorption spectroscopy is used to show that the CdS precursors strongly interact with the PbS NC surface. Electron microscopy reveals that the introduction of CdS precursors results in an increased particle size, consistent with overcoating. However, we also find the process to be highly non-uniform. Nevertheless, evidence for epitaxial growth is found, suggesting that effective surface passivation may be possible.     

Decisive role of Au layer on the oriented growth of ZnO nanorod arrays via a simple aqueous solution method

Vertically aligned arrays of ZnO nanorod were synthesized on the Au/SiO₂/Si(1 0 0) substrate by a simple aqueous solution growth process, without pre-prepared ZnO seed layer. For comparison, glass and SiO₂/Si were also used as substrates, and the results show that the Au layer plays a decisive role in orienting the growth of the ZnO nanorod. The effects of other growth parameters, including Zn²⁺ concentration and growth time, on morphology, density, and orientation of the ZnO nanostructure were also studied and with longer reaction time, a new structure namely ZnO nanotip was obtained. Moreover, the growth mechanism of ZnO nanorod arrays grown on the Au/SiO₂/Si substrate was proposed.     

Homogeneous SiGe crystals grown by using the traveling liquidus-zone method

It is indispensable to estimate a diffusion coefficient in a solution zone in order to grow a homogeneous crystal by using the traveling liquidus-zone (TLZ) method. To estimate the diffusion coefficient of Ge in the SiGe solution zone, result of a two-dimensional numerical simulation is compared with an experimental result. From the comparison, the diffusion coefficient is estimated to be 9.5×10⁻⁵ cm²/s. By using this coefficient, a sample translation rate for obtaining a homogeneous SiGe crystal is determined. By translating samples with appropriate rates, homogeneous Si_0.5Ge_0.5 crystals are successfully grown. The typical Ge composition is 0.496±0.006 for more than 13 mm long. The experimental result shows the homogeneity of ±1.2% in the mole fraction. This deviation corresponds to the variation of less than ±0.03% in the lattice constant. Since this variation is negligibly small, the homogeneity is excellent. Thus it is found that the TLZ method is the universal growth technique, which is applicable to the crystal growth of not only the III–V compounds but also the IV–IV compounds.     

Facile synthesis and assembly of CuS nano-flakes to novel hexagonal prism structures

Highly ordered hexagonal prism microstructures of copper sulfide (CuS) by assembling nano-flakes have been synthesized with high yield via a facile one-step route. We synthesized CuS microstructures using low cost beginning materials CuSO₄·5H₂O and Na₂S₂O₃·5H₂O under lower reaction temperature (60 °C). Hexamethylinetetramin (C₆H₁₂N₄, HMT) was introduced into the reaction system as a capped agent. The influence of reaction time and capping agent (HMT) on the final structure of products was studied systematically. The obtained products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopes (EDS), and transmission electron microscopy (TEM). The possible mechanism for the formation of the interesting highly ordered hexagonal prism microstructures CuS was also proposed.     

Epitaxial growth of GdN on silicon substrate using an AlN buffer layer

We report on the epitaxial growth of the intrinsic ferromagnetic semiconductor GdN on Si (1 1 1) substrates buffered by a thick AlN layer, forming a heteroepitaxial system with promise for spintronics. Growth is achieved by depositing Gd in the presence of unactivated N₂ gas, demonstrating a reactivity at the surface that is sufficient to grow near stoichiometric GdN only when the N₂:Gd flux ratio is at least 100. Reflection high-energy electron diffraction and X-ray diffraction show fully (1 1 1)-oriented epitaxial GdN films. The epitaxial quality of the films is assessed by Rutherford backscattering spectroscopy carried out in random and channelling conditions. Magnetic measurements exhibit a Curie temperature at 65 K and saturation magnetisation of 7 μ_B/Gd in agreement with previous bulk and thin-film data. Hall effect and resistance data establish that the films are heavily doped semiconductors, suggesting that up to 1% of the N sites are vacant.     

Catalytic growth of In2O3 nanobelts by vapor transport

Indium oxide (In₂O₃) nanobelts have been fabricated by thermal evaporation of metallic indium powders with the assistance of Au catalysts. The as-synthesized nanobelts are single-crystalline In₂O₃ with cubic structure, and usually tens of nanometers in thickness, tens to hundreds of nanometers in width, and several hundreds of micrometers in length. The room temperature photoluminescence spectrum of In₂O₃ nanobelts features a broad emission band at 620 nm, which could be attributed to oxygen deficiencies in the as-synthesized belts. The formation of In₂O₃ nanobelts follows a catalyst-assistant vapor—liquid–-solid growth mechanism, which enables the controlled growth of individual belts on predetermined sites.     

Enhancement of near-band edge photoluminescence of ZnO thin films by employing MgF2 buffer layer

ZnO/MgF₂/ZnO sandwich structure films were fabricated. The effects of a buffer layer on structure and optical properties of ZnO films were investigated by X-ray diffraction, photoluminescence, optical transmittance and absorption measurements. Measurement results showed that the buffer layer had the effects of improving the quality of ZnO films and releasing the residual stresses in the films. The near-band edge emissions of ZnO films deposited on the MgF₂ buffer layer were significantly enhanced compared with those deposited on bare substrate due to the smaller lattice mismatch between MgF₂ and ZnO than that between fused silica and ZnO.     

Dynamic process of crystallization of Sb2Se3 from Sb50Se50 amorphous film

Dynamics of crystallization of amorphous antimony-selenium film deposited on carbon substrate have been studied by the high-resolution transmission electron microscopy. The amorphous film was suddenly crystallized at 200°C by heating in vacuum. By the electron beam irradiation crystallization occurred at the focused electron beam region in the amorphous film. The growth process of crystallization by electron beam irradiation was recorded on a video image at the atomic resolution mode. The growth front of crystallization showed nano-concave and -convex shapes. The recrystallization with the different orientation at the first grown crystal have been found, and discussed as the influence of remaining antimony crystallites at the first crystallized film region.     

Self-formation of dielectric layer containing CoSi2 nanocrystals by plasma-enhanced atomic layer deposition

Dielectric layer containing CoSi₂ nanocrystals was directly fabricated by plasma-enhanced atomic layer deposition using CoCp₂ and NH₃ plasma mixed with SiH₄ without annealing process. Synchrotron radiation X-ray diffraction and X-ray photoelectron spectroscopy results confirmed the formation of CoSi₂ nanocrystal. The gate stack composed of dielectric layer containing CoSi₂ nanocrystals with ALD HfO₂ capping layer together with Ru metal gate was analyzed by capacitance–voltage (C–V) measurement. Large hysteresis of C–V curves indicated charge trap effects of CoSi₂ nanocrystals. The current process provides simple route for the fabrication of nanocrystal memory compatible with the current Si device unit processes.     

Study of the ZnO crystal growth by vapour transport methods

The crystal growth of ZnO by vapour transport is classically made with the assistance of additional species that produce a gaseous mixture, the role of which remains often uncertain in the transport and growth process. Initially, in order to study the mass transport process, a numerical simulation is made to analyse which are the requirements to have an effective transport. As the pressure of each gaseous species is generally unknown, the numerical study has been performed for different total pressures. It is found that, if congruent and equilibrium conditions are assumed at the sublimation and crystallisation interfaces, effective growth conditions can only be attained for a narrow range of total pressures. Nevertheless, it is well known that ZnO growth by vapour transport is possible for a wide range of pressures of gaseous species. As a consequence, partial pressures higher than the equilibrium ones must be present in order to justify the experimental results. We suggest that the thermal decomposition of ZnO is given by an activated process. The analysis of different mechanisms that could justify the activated decomposition, in accord with a systematic set of growth experiments, suggests that some additional species in the growth of ZnO by vapour transport promote the generation of an additional Zn pressure. This zinc pressure would act autocatalytically inducing O₂ and Zn partial pressures higher than the equilibrium ones and promoting thermal decomposition. The above-cited set of experimental growth experiences, that include the presence of C, Zn, Fe, Cu and H₂, will be analysed and interpreted according to this approach.     

Preparation of CdS nanowires by the decomposition of the complex in the presence of microwave irradiation

A novel synthetic route for the preparation of CdS nanowires has been developed. CdS nanowires with a diameter of ca. 4 nm have been successfully prepared by the microwave irradiation of a complex of cadmium-1-pyrrlidine dithio carboxylic acid ammonium (C₅H₁₂N₂S₂, APDTC) [Cd(APDTC)₂]₂ in an ethylenediamine solution. The CdS nanowires were characterized by powder X-ray diffraction pattern, transmission electron microscopy (TEM), UV-Vis spectroscopy, diffuse reflection spectroscopy and PL spectroscopy.     

Oriented growth of benzophenone crystals from undercooled melts

The tin sulfides compounds SnS and SnS₂ nanoflakes were prepared by the microwave-assisted polyol synthetic method. The as-prepared nanoscale flakes were characterized by X-ray powder diffraction, transmission electron microscopy, selected area electron diffraction, X-ray photoelectron spectroscopy and Raman spectra. The influences of solvents and microwave irradiation on the formation of products have been studied.     

Coexistence properties of phase separation and CuPt-ordering in InGaAsP grown on GaAs substrates by organometallic vapor phase epitaxy

CuPt-ordering and phase separation were directly investigated in In_1-xGa_xAs_yP_1-y with a low arsenic content grown by organometallic vapor phase epitaxy on GaAs substrates. CuPt-ordering and phase separation in samples grown at the substrate temperatures of 630 and 690 °C were characterized by transmission electron diffraction and transmission electron microscopy. Although the immiscibility of InGaAsP was enhanced at the lower substrate temperature, the sample grown at 630 °C showed less phase separation than the 690 °C-grown sample. The degree of CuPt-ordering was significantly enhanced in the sample grown at 630 °C. The results demonstrated that the CuPt-ordering originating from surface reconstruction of P(2×4) suppressed the phase separation even in the miscibility gap. The detailed characterization of the phase separation clearly revealed a vertical composition modulation (VCM) in InGaAsP for the first time. The mechanism of the VCM formation is discussed based on the modulated-strain field on the surface.     

Growth and Raman spectroscopic characterization of As4S4 (II) single crystals

As described by Kutoglu (1976 [16]), single crystals of As₄S₄ (II) phase have been grown using a new two-step synthesis that drastically increases the reproducibility that is attainable in synthetic experiments. First, through photo-induced phase transformation, pararealgar powder is prepared as a precursor instead of AsS melt. Then it is dissolved and recrystallized from CS₂ solvent. Results show that single crystals of the As₄S₄ (II) phase were obtained reproducibly through the dissolution–recrystallization process. Single crystals of As₄S₄ (II) obtained using this method were translucent and showed a uniform yellow-orange color. The crystal exhibits a platelet-like shape as a thin film with well-developed faces (0 1 0) and (0 1¯ 0). The grown crystals are as large as 0.50×0.50×0.01 mm. They were characterized using powder and single crystal X-ray diffraction techniques to confirm the phase identification and the lattice parameters. The As₄S₄ (II) phase crystallizes in monoclinic system with cell parameters a=11.202(4) Å, b=9.954(4) Å, c=7.142(4) Å, β=92.81(4)°, V=795.4(6) Å³, which shows good agreement with the former value. Raman spectroscopic studies elucidated the behavior of the substance and the relation among phases of tetra-arsenic tetrasulfide.     

Synthesis and characterization of a micro scale zinc oxide–PVA composite by ultrasound irradiation and the effect of composite on the crystal growth of zinc oxide

Micro scale zinc oxide-polyvinyl alcohol (ZnO–PVA) composite has been synthesized by ultrasound irradiation. The properties of the as-prepared ZnO–PVA composite material are characterized by X-ray diffraction (XRD), thermo gravimetric analysis (TGA), transmission electron microscopy (TEM), and diffuse reflection spectroscopy (DRS). A band gap of 3.25 eV is estimated from DRS measurements. The controlled crystal growth of zinc oxide has been studied by using the as-prepared micro scale ZnO–PVA composite as seeds for the crystal growth of ZnO.     

Optical and electrical properties of lithium doped nickel oxide films deposited by spray pyrolysis onto alumina substrates

Non-doped and lithium doped nickel oxide crystalline films have been prepared onto quartz and crystalline alumina substrates at high substrate temperature (600 °C) by the pneumatic spray pyrolysis process using nickel and lithium acetates as source materials. The structure of all the deposited films was the crystalline cubic phase related to NiO, although this crystalline structure was a little bit stressed for the films with higher lithium concentration. The grain size had values between 60 and 70 nm, almost independently of doping concentration. The non-doped and lithium doped films have an energy band gap of the order of 3.6 eV. Hot point probe results show that all deposited films have a p-type semiconductor behavior. From current–voltage measurements it was observed that the electrical resistivity decreases as the lithium concentration increases, indicating that the doping action of lithium is carried out. The electrical resistivity changed from 10⁶ Ω cm for the non-doped films up to 10² Ω cm for the films prepared with the highest doping concentration.     

Variation of crystallization mechanisms in flash-lamp-irradiated amorphous silicon films

Flash lamp annealing (FLA) can form polycrystalline silicon (poly-Si) films with various microstructures depending on the thickness of precursor amorphous Si (a-Si) films due to the variation of crystallization mechanisms. Intermittent explosive crystallization (EC) takes place in precursor a-Si films thicker than approximately 2 μm, and the periodicity of microstructure formed resulting from the intermittent EC is independent of the thickness of a-Si films if their thickness is 2 μm or greater. In addition to the intermittent EC, continuous EC and homogeneous solid-phase crystallization (SPC) also occur in thinner films. These crystallization mechanisms are governed by the ignition of EC at Si film edges and the homogeneous heating of interior a-Si. The results obtained in this study could be applied to control the microstructures of flash-lamp-crystallized poly-Si films.