Flux growth and characterizations of NdPO4 single crystals

Neodymium phosphate single crystals, NdPO₄, have been grown by a flux growth method using Li₂CO₃-2MoO₃ as a flux. The as-grown crystals were characterized by X-ray powder diffraction(XRPD), differential thermal analysis (DTA) and thermogravimetric analysis (TG) techniques. The results show that the as-grown crystals were well crystallized. The crystal was stable over the temperature range from 26 to 1200 °C in N₂. The specific heat of NdPO₄ crystal at room temperature was 0.41 J/g °C. The absorption and the fluorescence spectra of NdPO₄ crystal were also measured at room temperature.     

Synthesis,growth and characterization of organic nonlinear optical bis-glycine maleate (BGM) single crystals

A new organic compound of bis-glycine maleate was synthesized in the alkaline medium of 10% ammonium hydroxide solution. The bulk single crystals of Bis-Glycine Maleate (BGM) have been grown by slow cooling method. The grown crystals were characterized by employing single crystal and powder X-ray diffraction, Fourier transform infrared, optical absorption spectral studies and thermo gravimetric analysis. The microhardness studies confirmed that the BGM has a fairly high Vicker’s hardness number value (41 kg mm⁻²) in comparison to other organic NLO crystals. Second harmonic generation efficiency of the crystal measured by Kurtz–Perry powder method using Nd:YAG laser is found to be comparable to that of potassium dihydrogen phosphate (KDP). Frequency dependent dielectric studies were carried out along the major growth axis.     

Growth and characterisation of benzaldehyde semicarbazone (BSC) single crystals

Single crystals of potential organic nonlinear optical materials of Benzaldehyde Semicarbazone (BSC) were grown by slow evaporation technique. The grown crystals were identified by X-ray diffraction method. The functional groups were identified from FT-IR spectrum. UV-visible and thermal gravimetric analyses were made.     

GaN single crystals of different habit grown from solution at near atmospheric pressure

Near atmospheric pressure solution growth is one of the many developing methods for growing bulk GaN from solution. Apart from other approaches, this method holds certain advantages, such as relatively low growth pressure and temperature, and the ability to grow high quality GaN crystals with different orientations by varying the solvent composition. GaN whiskers of millimeter scale size with exceptional mechanical and optical properties were grown from solution. Crystals of near isotropic shape were also grown from solution by manipulating additives in the basic solvent.     

The influences of supersaturation on LPE growth of GaN single crystals using the Na flux method

The dependency of LPE growth rate and dislocation density on supersaturation in the growth of GaN single crystals in the Na flux was investigated. When the growth rate was low during the growth of GaN at a small value of supersaturation, the dislocation density was much lower compared with that of a substrate grown by the Metal Organic Chemical Vapor Deposition method (MOCVD). In contrast, when the growth rate of GaN was high at a large value of supersaturation, the crystal was hopper including a large number of dislocations. The relationship between the growth conditions and the crystal color in GaN single crystals grown in Na flux was also investigated. When at 800 °C the nitrogen concentration in Na–Ga melt was low, the grown crystals were always tinted black. When the nitrogen concentration at 850 °C was high, transparent crystals could be grown.     

Submicron rectangular hollow tube crystals of rutile-type GeO2

Single crystals of rutile-type GeO₂ having a structure equivalent to that of TiO₂, a well-known photocatalyst, have been grown for the first time in supercritical oxygen at approximately 5 GPa and 3000 K. The obtained crystals exhibit a rectangular hollow tube structure with submicron size (cross section with sides of ∼500 nm, wall thickness of ∼20 nm, and longitudinal length of ∼5 μm). These single crystals were grown within 1 s and along the c-axis surrounded by the (1 1 0) faces. The crystal growth mechanism strongly depends on the growth mechanism of rutile-type oxides, and the extremely short growing time is an important factor in the formation of hollow tube crystals.     

Unidirectional seeded single crystal growth from solution of benzophenone

A novel crystal growth method has been established for the growth of single crystal with selective orientation at room temperature. Using volatile solvent, the saturated solution containing the material to be crystallized was taken in an ampoule and allowed to crystallize by slow solvent evaporation assisted with a ring heater. The orientation of the growing crystal was imposed by means of a seed fixed at the bottom of the ampoule. By selecting a suitable ring heater voltage and by controlling the ring heater voltage, nucleation and the growth rate of the crystal were controlled more effectively. By employing this novel method, benzophenone single crystal ingots of diameters 10 and 20 mm and length more than 50 mm were successfully grown using xylene as solvent. The ease in scaling up of diameter from 10 to 20 mm shows the vital advantage of this technique. It was possible to achieve solute–crystal conversion efficiency of 100 percent. The grown benzophenone crystal was characterized by FTIR, TG and DTA, powder X-ray diffraction, X-ray rocking curve, optical transmission study and powder SHG measurement. The results show that the crystal quality is at least as good as the quality of the crystal grown by other known methods. Also, microbial growth was naturally avoided in this method, as the fresh solution is constantly made available for the growing crystal.     

AlN bulk single crystal growth on 6H-SiC substrates by sublimation method

Large and thick AlN bulk single crystals up to 43 mm in diameter and 10 mm in thickness have been successfully grown on 6H-SiC (0 0 0 1) substrates by the sublimation method using a TaC crucible. Raman spectrum indicates that the polytype of the grown AlN single crystals is a Wurtzite-2H type structure, and the crystals do not include any impurity phases. The quality at the top of the crystal improves as crystal thickness increases along the 〈0 0 0 1〉 direction during growth: a low etch pit density (7×10⁴ cm⁻²) and a small full width at half maximum for a 0002 X-ray rocking curve (58 arcsec) have been achieved at a thickness of ∼8 mm. The possible mechanism behind the improvement in the AlN crystal quality is also discussed.     

Surface growth mechanisms and structural faulting in the growth of large single and spherulitic titanosilicate ETS-4 crystals

Morphological, surface and crystallographic analyses of titanosilicate ETS-4 products, with diverse habits ranging from spherulitic particles composed of submicron crystallites to large single crystals, are presented. Pole figures revealed that crystal surfaces with a-, b- and c- axes corresponded to 110, 010 and 001 directions, respectively. Thus, technologically important 8-membered ring pores and titania chains in ETS-4 run along the b-axis of single crystals and terminate at the smallest crystal face. Height of the spiral growth steps observed on 1 0 0 and 0 0 1 surfaces corresponded to the interplanar spacings associated with their crystallographic orientation, and is equivalent to the thickness of building units that form the ETS-4 framework. Data suggest that the more viscous synthesis mixtures, with a large driving force for growth, increased the two- and three-dimensional nucleation, while limiting the transport of nutrients to the growth surface. These conditions increase the tendency for stacking fault formation on 1 0 0 surfaces and small angle branching, which eventually results in spherulitic growth. The growth of high quality ETS-4 single crystals (from less viscous synthesis mixtures) occurred at lower surface nucleation rates. Data suggest that these high quality, large crystals grew due to one-dimensional nucleation at spiral hillocks, and indicate that under these conditions un-faulted growth is preferred.     

Shape evolution of zinc oxide from twinned disks to single spindles through solvothermal synthesis in binary solvents

Shape evolution of ZnO crystals from twinned disks to single spindles was studied through solvothermal synthesis in binary solvents N,N-diethylformamide (DEF) and methanol (MeOH). The MeOH content in DEF had large influence on the morphology of the obtained ZnO crystals. In MeOH-free DEF, well-shaped ZnO twinned disks with perfect mirror symmetry could be formed through the assembly of ZnO₄⁶⁻–julolidinium–ZnO₄⁶⁻ growth units on the (0 0 0 1) growth interfaces. For small amounts of MeOH (MeOH/DEF=0.04), elongated twinned disks were formed since the growth along the polar c-axis was enhanced. With increasing MeOH content (MeOH/DEF=0.1), twinned rods with reduced mirror symmetry were formed. When a large amount of MeOH was added to DEF (MeOH/DEF=0.5), single spindles rather than twinned disks or twinned rods were obtained. A similar shape evolution of zinc oxide was observed in binary solvents DEF and N,N-dimethylformamide (DMF), suggesting that the growth of ZnO crystals with tuneable shape and size can be controlled by the composition of the binary solvent mixture.     

Growth and Raman spectroscopic characterization of As4S4 (II) single crystals

As described by Kutoglu (1976 [16]), single crystals of As₄S₄ (II) phase have been grown using a new two-step synthesis that drastically increases the reproducibility that is attainable in synthetic experiments. First, through photo-induced phase transformation, pararealgar powder is prepared as a precursor instead of AsS melt. Then it is dissolved and recrystallized from CS₂ solvent. Results show that single crystals of the As₄S₄ (II) phase were obtained reproducibly through the dissolution–recrystallization process. Single crystals of As₄S₄ (II) obtained using this method were translucent and showed a uniform yellow-orange color. The crystal exhibits a platelet-like shape as a thin film with well-developed faces (0 1 0) and (0 1¯ 0). The grown crystals are as large as 0.50×0.50×0.01 mm. They were characterized using powder and single crystal X-ray diffraction techniques to confirm the phase identification and the lattice parameters. The As₄S₄ (II) phase crystallizes in monoclinic system with cell parameters a=11.202(4) Å, b=9.954(4) Å, c=7.142(4) Å, β=92.81(4)°, V=795.4(6) Å³, which shows good agreement with the former value. Raman spectroscopic studies elucidated the behavior of the substance and the relation among phases of tetra-arsenic tetrasulfide.     

Growth of CuS platelet single crystals by the high-temperature solution growth technique

Millimeter size CuS single crystals with a dark indigo blue color and a plate hexagonal shape have been successfully grown by the high-temperature solution growth technique using the KCl–LiCl eutectic as solvent. Surface microtopographic studies of the crystals indicated that the growth is made by the lateral spreading of the layers. Electrical resistivity measurements clearly show an anomaly at T55 K, related with the low-temperature structural transition, a high residual resistivity ratio of 400 and a sharp superconducting transition at T≈1.7 K confirming the very good quality of the crystals.     

Synthesis, growth of organic nonlinear optical crystal: Semicarbazone of 2-amino-5-chloro-benzophenone (S2A5CB) and its characterisation

A new organic crystal of semicarbazone of 2–amino–5–chloro–benzophenone has been grown as a single crystal by slow evaporation solution growth technique for the first time in the literature. The grown crystal has been characterised by proton nuclear magnetic resonance spectral analysis and single crystal and powder X-ray diffraction studies. Functional groups of the crystallised molecules were confirmed by FT-IR and FT-Raman analyses. Mechanical strength of the crystals was studied by microhardness test. Optical transparency of the grown crystals has been studied by UV-Visible spectra. The second harmonic generation property of the compound was analysed.     

Controlled synthesis of different morphologies of BaWO4 crystals via a surfactant-assisted method

BaWO₄ crystals with different morphologies, such as nanosheets, nanobelts, flower-like, quadrangled plates and sheaves of dendrite, have been successfully synthesized via PVP as templates. Our result shows that reaction parameters, such as the concentration of PVP aqueous solutions, pH value of the starting solution and molar ratio of [Ba²⁺]/[WO₄²⁻] played important roles in the formation of BaWO₄ crystal with different morphologies. It is obviously different between microwave irradiation heating and oil bath heating. The products were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and electron diffraction.     

Improvement of crystal quality in ammonothermal growth of bulk GaN

Several key improvements in crystal quality of bulk GaN grown by the ammonothermal method are presented. Full width at half maximum of (0 0 2) X-ray rocking curve was reduced to 53 and 62 arcsec for Ga-side and N-side, respectively. Transparent bulk GaN crystal was also demonstrated. Oxygen and sodium concentrations were reduced to mid-10¹⁸ and mid-10¹⁵ cm⁻³, respectively. We are currently searching for a growth condition that produces transparent bulk GaN with high structural quality and low impurities. Small-sized, semi-transparent GaN wafers were fabricated by slicing the grown bulk GaN crystals, which demonstrate the high feasibility of ammonothermal growth for production of GaN wafers.     

Growth and morphology of ruby crystals with unusual chromium concentration

Single crystals of ruby have been obtained from fluxed melts based on the systems Li₂O–MoO₃, Li₂O–WO₃, Na₂O–WO₃, 2PbO–3V₂O₅, PbO–V₂O₅–WO₃, PbF₂–Bi₂O₃ and Na₃AlF₆ by both the TSSG method and spontaneous crystallization at the temperatures 1330–900 °C. Al₂O₃ solubility has been measured for the flux composition of 2Bi₂O₃–5PbF₂ in the temperature range 1200–1000 °C and dissolution enthalpy has been defined as 29.4 KJ/Mol. The composition of grown crystals was studied by electron microprobe analysis. The synthetic ruby contains from 0.51 to 6.38 at% of chromium admixture depending on the crystal growth conditions. Experimental results on growth conditions, composition and morphology of grown crystals are presented for each flux and temperature interval.     

Unidirectional growth of l-asparagine monohydrate single crystal: First time observation of NLO nature and other studies of crystalline perfection,optical, mechanical and dielectric properties

L-asparagine monohydrate (LAM), a new amino acid single crystal, was grown by slow evaporation solution technique (SEST) as well as by recently invented Sankaranarayanan–Ramasamy (SR) method in aqueous medium. Using SR method, LAM single crystal of diameter ∼18 mm and length ∼52 mm was grown for the first time. The growth conditions were optimized and the maximum growth rate of 1.0 mm per day was observed for the SR crystal. The crystal structure was confirmed by powder XRD. The crystalline perfection was assessed by high resolution XRD and etching studies and found that the quality of the SR crystal is better than the SEST crystal. The UV–vis–NIR spectroscopic study revealed that the SR crystal has good optical transparency than that of SEST crystal. The relative second harmonic generation efficiency was measured and found to be ∼0.35 times to that of KDP. The laser damage threshold (LDT) was measured and found that the SR crystal has higher LDT value (5.76 GW cm⁻²) than SEST crystal (4.75 GW cm⁻²). The Vickers’s microhardness and dielectric studies were also carried out and discussed.